68 K-10 SWB build thread - project Money Pit...pics galore! - Page 7 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**special-K** · 07-01-2007, 11:18 PM

That cab fit right on there,huh?That`s a 5' wide trailer,right?

msgross · 07-01-2007, 11:25 PM

Quote:

Originally Posted by special-K

That cab fit right on there,huh?That`s a 5' wide trailer,right?

I think so...just like you said it would Tim....... yur smart!

GREASEMONKEY72 · 07-02-2007, 02:39 AM

some nice progress since the last time i saw

msgross · 07-02-2007, 08:38 AM

Quote:

Originally Posted by GREASEMONKEY72

some nice progress since the last time i saw

thanks... I had to rush and get it together so that I could move it back to my house. I was paying $120/month in rent to be in a big "group" garage....That starts adding up fast.

bdozeraz · 07-02-2007, 02:23 PM

Quote:

Originally Posted by msgross

My "made in India" mounts are going right back to NAPA and they can kiss my "made in Indiana" butt!

I'll try a set from autozone or go with energy suspension. I think that they have a set for this truck....

What is everyone's thought about the tranny mount bushings and torque arm bushings being a size larger than the bolt. The outer brackets are the the right soze so it seems like energy did it on purpose.... maybe they want to allow for slight movement or the bushing is just needed for "crush" resistance?

Get the energy suspension mounts. I went through the same thing. I went to 4 different auto parts stores and they all had the same india mounts with the metric thread.

about your drive line being offset the drive trains usually are offset to the passenger side about 3/4" to 1" for brake booster clearance and extra foot room for the driver.

Your tranny mount bushings sound like all the ones I have ever used. They allow a little bit of play so you can line things up. There should be a sleeve that goes through the bushing that the bolt goes through.

msgross · 07-02-2007, 03:05 PM

The sleeve is what I meant to say was larger than needed. 1/2" bolt and 9/16 or 5/8 sleeve??? The top and bottom metal brackets are drilled for 1/2" though??

So the mounts are metric? that would explain why it slipped.... I'm taking them back and will order the energy one's... what a PITA!

thanks.

deer slayer · 07-19-2007, 09:59 PM

when you painted your frame what ratio did you use did you thin the primer too any particular brush you suggest

msgross · 07-19-2007, 10:39 PM

They don't recommend thinning at all...so I didn't. The primer sealer is pretty thin but covers in one coat, the paint was a little thick though. I used a good foam brush (lowes, wal-mart etc...).

deer slayer · 07-20-2007, 05:35 PM

so how many coats did you put on did you use the wole quart and the pint

msgross · 07-20-2007, 05:40 PM

2 coats of each (primer and paint) and covered the frame, crossmembers, axles, springs with 1 1/2 quarts of each.

So I needed 4 total quarts, still have 1/2 quart of each left and spent $100 on product and about $20 on brushes. Be sure to buy dishwashing gloves cause this stuff doesn't come off for a week once it's dry! Cleans up with mineral spirits for about an hour, recoat within 48 hours.

deer slayer · 07-20-2007, 06:10 PM

you recommend getting the frame blasted or just wire wheel

msgross · 07-20-2007, 09:16 PM

I suggest taking as much of it apart if it's as bad as mine was, then getting it blasted ($150-$250). The primer sticks better to freshly blasted metal and it's faster than doing the wire wheel job...

**special-K** · 07-21-2007, 06:20 AM

Gets in those nooks and crannies (think english muffins) like a wire wheel can`t.Mike,do you have any prints of your work?It would be neat to make a didplay for Carlisle.Maybe you could get alot of work from it

.
No,I was thinking it would be a nice show off of your progress...motivating to have all to see and comment.

msgross · 07-21-2007, 07:27 AM

Like I need to work on someone else truck!

The only area that was hard to get to was behind the rear shock mounts. Since I removed most of the crossmembers due to rot it was easy for me.

I could just tow the rolling chassis to Carlisle Tim!

j/k

msgross · 08-11-2007, 03:27 PM

Well, it's been awhile since I touched the truck. Decided to pick up a new starter ($35) and water pump ($25) and work towards getting the engine fired up again. Painted the new water pump, installed the starter and fuel pump. Next I need to add a Helicoil to the intake so I can get the carb on again and then install my ramhorns. Plan is so blast and coat them but I may get it running first. I'll post some pics tonight...

Oh yeah, I also made a small cart for my cab to move around on. Bet nobody has used 2x6 oak to hold their dolly wheels!

msgross · 08-11-2007, 11:05 PM

here's some of the pics from today.... my bad luck had to kick in and the John Deere died on me just as I was starting to mow... spent the entire evening changing battery cables, hope that fixes it....

1969k10stepside · 08-11-2007, 11:13 PM

Good progress.I'm almost to the point of no more work on my swb 4wd till paint so I went out and bought another 4wd,a 72 Blazer

Yet another project for poor ol' Dustin

Keep up the work Mike!

Chevyman63 · 08-12-2007, 10:50 AM

Excellent progress!! Looks great! Keep up the good work.

I built something similar to move my tub around, works great, but I got a little stupid.

msgross · 08-12-2007, 11:01 AM

wow, that's quite the setup... mine is a piece of 3/4 plywood with some 2x6 and dolly wheels.... Figured I could flip the cab on its back and work on it too....

Chevyman63 · 08-12-2007, 12:17 PM

Quote:

Originally Posted by msgross

wow, that's quite the seup... min is a piece of 3/4 plywood with some 2x6 and dolly wheels.... Figured I could flip the cab on its back and work on it too....

Good idea.

I built mine originally to haul my tub home from Iowa and just put 4x4's and wheels under it.

ChevyDude · 08-12-2007, 11:57 PM

I'm sure it's going to be awesome when you finish!!! Looking really good!

Alex

72armyswbtruck · 08-18-2007, 06:51 AM

NIce build thread, can't wait to see the finished project

msgross · 08-18-2007, 08:59 AM

thanks... there's gonna be a big delay from Oct till April while i'm in Alabama at school... Can't wait to search some lower AL junkyards though (RUST FREE!)

Rust Buster · 08-18-2007, 11:42 AM

I was looking forward to doing the same when I was down in training in AL, but when I asked around they all said to bring a big stick to ward off the snakes that are apparently all over those places, and I hate snakes...so I never went.

msgross · 08-19-2007, 02:18 AM

Quote:

Originally Posted by Rust Buster

I was looking forward to doing the same when I was down in training in AL, but when I asked around they all said to bring a big stick to ward off the snakes that are apparently all over those places, and I hate snakes...so I never went.

true, they do have rattlers in that area.... Better wear my leather boots and carharts then...

07-01-2007, 11:18 PM	#151
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,852	Re: 68 K-10 SWB build thread - project Money Pit...pics galore! That cab fit right on there,huh?That`s a 5' wide trailer,right? __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

07-02-2007, 02:39 AM	#153
GREASEMONKEY72 Registered User Join Date: Aug 2006 Location: Bakersfield,CA Posts: 7,893	Re: 68 K-10 SWB build thread - project Money Pit...pics galore! some nice progress since the last time i saw __________________ -steven Alte Seele S.S. "Allison" '72 C/10 LWB 350SB/TH350 - DD PITBULL IS NOT A CRIME

07-02-2007, 03:05 PM	#156
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: 68 K-10 SWB build thread - project Money Pit...pics galore! The sleeve is what I meant to say was larger than needed. 1/2" bolt and 9/16 or 5/8 sleeve??? The top and bottom metal brackets are drilled for 1/2" though?? So the mounts are metric? that would explain why it slipped.... I'm taking them back and will order the energy one's... what a PITA! thanks. __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer"

07-19-2007, 09:59 PM	#157
deer slayer Registered User Join Date: Jun 2006 Location: fl Posts: 274	Re: 68 K-10 SWB build thread - project Money Pit...pics galore! when you painted your frame what ratio did you use did you thin the primer too any particular brush you suggest

07-19-2007, 10:39 PM	#158
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: 68 K-10 SWB build thread - project Money Pit...pics galore! They don't recommend thinning at all...so I didn't. The primer sealer is pretty thin but covers in one coat, the paint was a little thick though. I used a good foam brush (lowes, wal-mart etc...). __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer"

07-20-2007, 05:35 PM	#159
deer slayer Registered User Join Date: Jun 2006 Location: fl Posts: 274	Re: 68 K-10 SWB build thread - project Money Pit...pics galore! so how many coats did you put on did you use the wole quart and the pint

07-20-2007, 05:40 PM	#160
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: 68 K-10 SWB build thread - project Money Pit...pics galore! 2 coats of each (primer and paint) and covered the frame, crossmembers, axles, springs with 1 1/2 quarts of each. So I needed 4 total quarts, still have 1/2 quart of each left and spent $100 on product and about $20 on brushes. Be sure to buy dishwashing gloves cause this stuff doesn't come off for a week once it's dry! Cleans up with mineral spirits for about an hour, recoat within 48 hours. __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer" Last edited by msgross; 07-20-2007 at 05:42 PM.

07-20-2007, 06:10 PM	#161
deer slayer Registered User Join Date: Jun 2006 Location: fl Posts: 274	Re: 68 K-10 SWB build thread - project Money Pit...pics galore! you recommend getting the frame blasted or just wire wheel

07-20-2007, 09:16 PM	#162
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: 68 K-10 SWB build thread - project Money Pit...pics galore! I suggest taking as much of it apart if it's as bad as mine was, then getting it blasted ($150-$250). The primer sticks better to freshly blasted metal and it's faster than doing the wire wheel job... __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer"

07-21-2007, 06:20 AM	#163
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,852	Re: 68 K-10 SWB build thread - project Money Pit...pics galore! Gets in those nooks and crannies (think english muffins) like a wire wheel can`t.Mike,do you have any prints of your work?It would be neat to make a didplay for Carlisle.Maybe you could get alot of work from it. No,I was thinking it would be a nice show off of your progress...motivating to have all to see and comment. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~ Last edited by special-K; 07-21-2007 at 06:21 AM.

07-21-2007, 07:27 AM	#164
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: 68 K-10 SWB build thread - project Money Pit...pics galore! Like I need to work on someone else truck! The only area that was hard to get to was behind the rear shock mounts. Since I removed most of the crossmembers due to rot it was easy for me. I could just tow the rolling chassis to Carlisle Tim! j/k __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer"

08-11-2007, 03:27 PM	#165
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: 68 K-10 SWB build thread - project Money Pit...pics galore! Well, it's been awhile since I touched the truck. Decided to pick up a new starter ($35) and water pump ($25) and work towards getting the engine fired up again. Painted the new water pump, installed the starter and fuel pump. Next I need to add a Helicoil to the intake so I can get the carb on again and then install my ramhorns. Plan is so blast and coat them but I may get it running first. I'll post some pics tonight... Oh yeah, I also made a small cart for my cab to move around on. Bet nobody has used 2x6 oak to hold their dolly wheels! __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer"

08-11-2007, 11:05 PM	#166
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: 68 K-10 SWB build thread - project Money Pit...pics galore! here's some of the pics from today.... my bad luck had to kick in and the John Deere died on me just as I was starting to mow... spent the entire evening changing battery cables, hope that fixes it.... Attached Images __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer"

08-11-2007, 11:13 PM	#167
1969k10stepside Registered User Join Date: Mar 2006 Location: USA Posts: 21,020	Re: 68 K-10 SWB build thread - project Money Pit...pics galore! Good progress.I'm almost to the point of no more work on my swb 4wd till paint so I went out and bought another 4wd,a 72 Blazer Yet another project for poor ol' Dustin Keep up the work Mike! Last edited by 1969k10stepside; 08-11-2007 at 11:13 PM.

08-12-2007, 10:50 AM	#168
Chevyman63 Can't wait to retire!! Join Date: Feb 2003 Location: Corunna, MI Posts: 1,575	Re: 68 K-10 SWB build thread - project Money Pit...pics galore! Excellent progress!! Looks great! Keep up the good work. I built something similar to move my tub around, works great, but I got a little stupid. __________________ 2009 4x4 Chevy Crew Cab 6.0 1989 4x4 Siverado (270,000 miles) 1972 4x4 Blazer 2007 Chevy Cutaway 1 ton 1970 Corvette (sons project) RIP - CLR 10/11/09 Last edited by Chevyman63; 08-12-2007 at 10:52 AM.



Register or Log In To remove these advertisements.

08-12-2007, 11:01 AM	#169
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: 68 K-10 SWB build thread - project Money Pit...pics galore! wow, that's quite the setup... mine is a piece of 3/4 plywood with some 2x6 and dolly wheels.... Figured I could flip the cab on its back and work on it too.... __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer" Last edited by msgross; 08-12-2007 at 01:36 PM.

08-12-2007, 11:57 PM	#171
ChevyDude Senior Member Join Date: Jun 2003 Location: Westminster, CO Posts: 3,071	Re: 68 K-10 SWB build thread - project Money Pit...pics galore! I'm sure it's going to be awesome when you finish!!! Looking really good! Alex __________________ Alex 1971 Lil' Red 350 SBC 700R4

08-18-2007, 06:51 AM	#172
72armyswbtruck Registered User Join Date: Feb 2004 Location: Idaho Posts: 4,034	Re: 68 K-10 SWB build thread - project Money Pit...pics galore! NIce build thread, can't wait to see the finished project __________________ "Remember, They can Kill You, but they can't eat You, That's against the law!!!!!!!!!"

08-18-2007, 08:59 AM	#173
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: 68 K-10 SWB build thread - project Money Pit...pics galore! thanks... there's gonna be a big delay from Oct till April while i'm in Alabama at school... Can't wait to search some lower AL junkyards though (RUST FREE!) __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer"

08-18-2007, 11:42 AM	#174
Rust Buster Registered User Join Date: Apr 2007 Location: Virginia Posts: 547	Re: 68 K-10 SWB build thread - project Money Pit...pics galore! I was looking forward to doing the same when I was down in training in AL, but when I asked around they all said to bring a big stick to ward off the snakes that are apparently all over those places, and I hate snakes...so I never went. __________________ Maj USAF 71 K5 Blazer CST 72 K20 HT383 NV4500 Mass-Flo EFI 71 K10 LWB 52 Dodge Power Wagon 67 Dodge WM300 Power Wagon 48 Dodge WDX Power Wagon My Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=239487

Register or Log In To remove these advertisements.