My crewcab 4x4 cummins project

[hick]

If you say its Auto World, then thats what i will be ordering

Thank you sir

[Pullin81]

Originally Posted by hick

If you say its Auto World, then thats what i will be ordering

Thank you sir

yes your right its from auto world... all the brackets are....

and i guess im keeping my shop until the new year .. the gf says ill be cranky if i dont have a cave to work on my truck so im going to strech it out till a buddy of mine gets his garage finished inside n i will move it there...

ive been picking away at moving my divorced case ahead the last few days and getting little projects i had started finished up... ive also been trying to track down a short box for it if i dont find one this week im just going to get all new floor and sides... i took a 8' box side and shortened it 14 inches to see how it would look as a 7' box but to much work involved in getting the panels shrunk and streched to do a good job of metal finishing so short box it is.

[Pullin81]

Does anyone know of any other company that does body panels I'm looking for a rear driver side door ... I got the one from lmc but they only had right sides
Posted via Mobile Device

[Pullin81]

7ft box?
Posted via Mobile Device

[Pullin81]

7' box again...
Posted via Mobile Device

[Dieselwrencher]

I know I have at least one good rust free oem door. I can get you pics of it if you'd like? The 7' box doesn't look too bad really.

[Pullin81]

Originally Posted by Dieselwrencher

I know I have at least one good rust free oem door. I can get you pics of it if you'd like? The 7' box doesn't look too bad really.

Yeah for sure if you got a drivers rear door post a couple picture of outside n inside... Not sure how the shipping works I got a buddy in the auto parts buisness that orders most everything for me that I get from the states
Posted via Mobile Device

[hick]

Originally Posted by Pullin81

Yeah for sure if you got a drivers rear door post a couple picture of outside n inside... Not sure how the shipping works I got a buddy in the auto parts buisness that orders most everything for me that I get from the states
Posted via Mobile Device

Call Kendale Truck Parts here in Edmonton. Ask to speak to Mike or Barry. (Barry owns the places)

They have a farm with acres of stuff. Mostly new, but he does have a nice stash of square body stuff. I have been meaning to go browse but i never have time.

The auto wreckers in Vermilion also has a nice selection of squares. I know these are places out of your neck of the woods, but its my area so i know they are there

[Pullin81]

Hey man thanks for the places to look I see that kendale ships anywhere as well I got one more wrecking yard down here to try and if I have no luck I will try them
Posted via Mobile Device

[Pullin81]

Well the new bed floor and box sides showed up from lmc... I was a little disappointed when I opened up the left side n found a big dent in it right from the centre of the wheel arch to about 4" above the body line ... Sucks when people are careless when shipping goods... So waiting until Monday to call... The bed floor was also dinged up where the filler tubes go threw but I hammered those back into place
Posted via Mobile Device

[Telecasterjoey]

Did you pay an arm and a leg to get those panels to canada?

[Pullin81]

Originally Posted by Telecasterjoey

Did you pay an arm and a leg to get those panels to canada?

Actually I didn't a local parts store here the boss goes to the border once every two weeks to pick up anything that's orders just has a ship to address there also good friends with everyone at the shop ... And as far as getting it to the border lmc is free shipping over $1000 don't know if that's just to retail stores or to the normal consumer
Posted via Mobile Device
Posted via Mobile Device

[Pullin81]

Ended up gettin a bit of work done on the box I got the floor crossmember notched out for my fuel tank n sending unit... Also go the passenger side fuel door shaved and started on putting the fuel door on the rear on the passenger side
Posted via Mobile Device

[Pullin81]

Fuel door being relocated to the rear
Posted via Mobile Device

[Dieselwrencher]

It's crooked!!!!!!!!!!! J/K nice work, it's looking great!

[hick]

I like the tank relocate. You going with a blazer tank?

[Pullin81]

Her was the new side that had a smuck in it I managed to yank it all out with the UNi spot within a 16th
Posted via Mobile Device

[Pullin81]

Pulled with the UNi spot ... Little hammer work n fill n block
Posted via Mobile Device

[Pullin81]

All blocked out n glazed stake pockets shaved just got sand some spots on the lower part of the box sides and it will be time to epoxy and high build...
Posted via Mobile Device

[Dieselwrencher]

Great work. Want to do another bed?

[Pullin81]

Got the box in epoxy and a heavy coat of high build and guide coat... Time to start blocking and fixing any unseen imperfections
Posted via Mobile Device
Posted via Mobile Device

[Pullin81]

Set the box back on ready to block out
Posted via Mobile Device

[nomrlz]

nice build! my son saw me lookin at this and said it may be the coolest truck ever...........especially that bumper. he turned 14 yesterday and said he'll give you all his birthday money for it

[Pullin81]

Well I got suckered into doing a quick body n paint job on this old 63 the guy just wants the rust that's visible fixed And resprayed flat black... It's an off road truck that spends its life in the mountains but hey I guess .. Few extra bucks to the crew cab fund lol... Not bad 40 super swampers to my 33s mines bigger haha
Posted via Mobile Device

[Dieselwrencher]

That looks like a cool old truck! What tire size did you decide to go with for the end result?