Dino63's 66SWB - Page 7 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

PBFAB.COM · 08-23-2007, 06:15 PM

Quote:

Originally Posted by SCOTI

Excellent! That's what I'm talkin' about. Is that the 4" ride height option or ??

That's just under 5". The optimum suspension geometry is at a 5" ride-heigth, but it can be driven comfortably between 2" and 6" off the ground.

L0WRIDE · 08-24-2007, 11:22 PM

dam thats nice. That gives me a tingling feeling in my area.

Dinos63 · 08-24-2007, 11:28 PM

Quote:

Originally Posted by porterbuilt

That's just under 5". The optimum suspension geometry is at a 5" ride-heigth, but it can be driven comfortably between 2" and 6" off the ground.

The most comfort at 2"

n2billet · 08-29-2007, 11:53 AM

Dino, can't wait to meet you and get to see the 66 in person at Goodguys Dallas. That green monster has awards written all over it plus it would be a great selling point on Nathan's dropmember for the guys that are on the fence about buying one and last but not least you'll get to drive that bad boy around the track on Saturday!

satin64 · 08-29-2007, 12:00 PM

man that is cool!dont even want to know what that k-member cost.all the green monster needs now is curb feelers

n2billet · 08-29-2007, 12:27 PM

Quote:

Originally Posted by satin64

man that is cool!dont even want to know what that k-member cost.all the green monster needs now is curb feelers

I'll tell you this: it's a ton cheaper than a Mustang II setup and a whole lot easier to install! In short: worth every penny you can't go wrong with this setup.

satin64 · 08-29-2007, 12:59 PM

now you peaked my interest......any more info on the k member?

smbrouss70 · 08-29-2007, 01:52 PM

Dropmember with Truck arms: http://67-72chevytrucks.com/vboard/s...d.php?t=201898

Dropmember with C4 arms: http://67-72chevytrucks.com/vboard/s...d.php?t=212001

or www.porterbuiltstreetrods.com

BigShoe24 · 08-29-2007, 07:24 PM

Nathan, Im ready to order my air mang. system, but cant quite decide on what I want. Does Dino's66 have the big reds? Also, how big is the tank on the truck? Actually, I guess I just want to know what the entire set-up is.

Any help would be great. Thanks

PBFAB.COM · 08-29-2007, 07:57 PM

Quote:

Originally Posted by BigShoe24

Nathan, Im ready to order my air mang. system, but cant quite decide on what I want. Does Dino's66 have the big reds? Also, how big is the tank on the truck? Actually, I guess I just want to know what the entire set-up is.

Any help would be great. Thanks

Dino's running ART Big Red Valves, 3/8" line, Oasis compressor, 5 gallon tank, and plain old rocker style switches (Like power windows have). It's a very functional and simple set-up. He isn't even running gauges... the majority of guys will want to though!

Give me a call tomorrow and we can get something set-up... or call Clint over at KP and he will hook you up as well.

IvelDesigns · 08-30-2007, 12:22 AM

no gauges?!? I'd be really nervous running w/o gauges.

great setup on this truck though.

Dinos63 · 08-30-2007, 12:36 AM

Quote:

Originally Posted by IvelDesigns

no gauges?!? I'd be really nervous running w/o gauges.

great setup on this truck though.

I HAVE SOME CARS AND TRUCKS WITH GAUGES.THE PANEL AND GREEN MONSTER DONT. BUT IT SOUNDS CRAZY AFTER A WHILE YOU WELL GET THE FEELING WERE THE TRUCKS SITS AND RIDES GOOD, YOU MY ALSO KNOCK ALOT OF THOSE WHITE DOTS OFF THE FREEWAY TOO

Dinos63 · 08-30-2007, 12:44 AM

Quote:

Originally Posted by satin64

now you peaked my interest......any more info on the k member?

UNDER THE HOOD PIC OF THE DROP MEMBER

64shortc10 · 08-30-2007, 01:28 AM

Dino,

Just wondering if you had a chance to measure your c-notch for me yet? I'll definetly take you up on the test ride, I will be in Buckeye on the 15th of next month. I look foward to meeting you and Nathan, and seeing the Green Monster! Hopefully while i'm there I can buy a set of cool hood hinges like the ones on yours. Thanks

Tony from Norcal

PBFAB.COM · 08-30-2007, 01:30 AM

Quote:

Originally Posted by 64shortc10

Dino,

Just wondering if you had a chance to measure your c-notch for me yet? I'll definetly take you up on the test ride, I will be in Buckeye on the 15th of next month. I look foward to meeting you and Nathan, and seeing the Green Monster! Hopefully while i'm there I can buy a set of cool hood hinges like the ones on yours. Thanks

Tony from Norcal

Tony-
I will post up some measurements tomorrow for ya on the notch height. Looking forward to meeting you.

Dinos63 · 08-30-2007, 09:35 AM

Quote:

Originally Posted by 64shortc10

Dino,

Just wondering if you had a chance to measure your c-notch for me yet? I'll definetly take you up on the test ride, I will be in Buckeye on the 15th of next month. I look foward to meeting you and Nathan, and seeing the Green Monster! Hopefully while i'm there I can buy a set of cool hood hinges like the ones on yours. Thanks

Tony from Norcal

COOL, COME ON OVER, SORRY I WILL GET THAT MEASUREMENT

FOR YA

azfab · 08-31-2007, 01:45 AM

where do i go to get a dropmember? what do they run?

SCOTI · 08-31-2007, 01:57 AM

Quote:

Originally Posted by azfab

where do i go to get a dropmember? what do they run?

www.porterbuiltstreetrods.com
http://www.kplinks.com/

7071Bluck · 09-07-2007, 08:51 PM

I am wanting to know what you are doing with the steering I found a price for the drop member but how much more is it gonna cost to make it driveable

PBFAB.COM · 09-07-2007, 09:09 PM

Quote:

Originally Posted by 7071Bluck

I am wanting to know what you are doing with the steering I found a price for the drop member but how much more is it gonna cost to make it driveable

The steering linkage will run you $279 and a power rack is $250 (manual rack $230) through Unisteer. The power steering lines run about $100 for braided stainless and the rubber ones are $40 (I think), and the best source for the lines is Borgeson. I do not supply the steering components... just the Dropmember kit. Clint at KP can set you up with a COMPLETE kit. Current retail on the Dropmember is $1425.

mlane65 · 09-15-2007, 09:20 PM

hey Nathan, did you alter the wheelbase on Dinos 66 ,or did you just swing the trailing arms up and center your notch ? thanks for info!

PBFAB.COM · 09-15-2007, 10:43 PM

Quote:

Originally Posted by mlane65

hey Nathan, did you alter the wheelbase on Dinos 66 ,or did you just swing the trailing arms up and center your notch ? thanks for info!

I removed the coil springs and sat the frame on the axle tubes, I checked the wheels in the opening to make sure they were where I wanted them and then made my mark.

jasonb72 · 09-15-2007, 10:50 PM

Nate,

If you get this post in time call me please. 214-536-5494

1963chevyshort · 09-16-2007, 12:59 PM

Hey Dino or Nathan, Could i see a shot of the front shock mount. For some reason mine looks different or maybe i am looking at mine wrong.

PBFAB.COM · 09-16-2007, 08:14 PM

Quote:

Originally Posted by 1963chevyshort

Hey Dino or Nathan, Could i see a shot of the front shock mount. For some reason mine looks different or maybe i am looking at mine wrong.

Anthony-

Yours is going to be different than the one on Dino's truck... his was one I just threw together (a while before I offered one with the Dromember kit). I will get some ics to ya tomorrow if needed. Are you wondering how it goes on?

Nate

08-24-2007, 11:22 PM	#152
L0WRIDE Registered User Join Date: Jan 2005 Location: AUCKLAND, NEW ZEALAND Posts: 2,166	Re: Dino63's 66SWB dam thats nice. That gives me a tingling feeling in my area. __________________ 49 CHEVROLET 1/2 TON, 52 CHEVROLET SEDAN 62 HARDTOP NOVA 65 CHEVROLET BB LWB FLEETSIDE 90 CHEVROLET EXTRA CAB CHEVY ONLY - NZ Chapter http://67-72chevytrucks.com/vboard/s...d.php?t=137984

08-29-2007, 11:53 AM	#154
n2billet Village Idiot.... Join Date: Jul 2003 Location: Rowlett, Texas Posts: 1,833	Re: Dino63's 66SWB Dino, can't wait to meet you and get to see the 66 in person at Goodguys Dallas. That green monster has awards written all over it plus it would be a great selling point on Nathan's dropmember for the guys that are on the fence about buying one and last but not least you'll get to drive that bad boy around the track on Saturday!

08-29-2007, 12:00 PM	#155
satin64 Registered User Join Date: Aug 2007 Location: st.helens oregon Posts: 312	Re: Dino63's 66SWB man that is cool!dont even want to know what that k-member cost.all the green monster needs now is curb feelers

08-29-2007, 12:59 PM	#157
satin64 Registered User Join Date: Aug 2007 Location: st.helens oregon Posts: 312	Re: Dino63's 66SWB now you peaked my interest......any more info on the k member?

08-29-2007, 01:52 PM	#158
smbrouss70 Registered User Join Date: Sep 2003 Location: Rayne, LA Posts: 2,781	Re: Dino63's 66SWB Dropmember with Truck arms: http://67-72chevytrucks.com/vboard/s...d.php?t=201898 Dropmember with C4 arms: http://67-72chevytrucks.com/vboard/s...d.php?t=212001 or www.porterbuiltstreetrods.com __________________ Steven "If dogs don't go to heaven, when I die I want to go wherever they went." -- Will Rogers R.I.P. Oscar R.I.P. Ratchet 1967 Pontiac GTO - Dad was the Original Owner 1970 Chevy 2wd SWB "Oscar's Truck" 1970 Chevy 2wd Blazer "Ratchet's Blazer" 2013 Chevy 2500HD Crew Cab Duramax/Allison Z71 LTZ "Brown Sugar" 2017 Chevy Suburban "BDB" 2020 Chevy Blazer Premier "Foxy" Member of Louisiana Classic Truck Club (LCTC) Shop Build Last edited by smbrouss70; 08-29-2007 at 01:54 PM.

08-29-2007, 07:24 PM	#159
BigShoe24 True Addiction Join Date: Nov 2005 Location: FTL Posts: 415	Re: Dino63's 66SWB Nathan, Im ready to order my air mang. system, but cant quite decide on what I want. Does Dino's66 have the big reds? Also, how big is the tank on the truck? Actually, I guess I just want to know what the entire set-up is. Any help would be great. Thanks Attached Images

08-30-2007, 12:22 AM	#161
IvelDesigns Commander Taco Bello Join Date: Sep 2006 Location: Des Moines, Iowa Posts: 2,232	Re: Dino63's 66SWB no gauges?!? I'd be really nervous running w/o gauges. great setup on this truck though. __________________ Bagged '50 3600 - Bumper punchin' road kill since 2009... Bagged '69 C10 Longbed - Bumper punchin' road kill since 2007...

08-30-2007, 01:28 AM	#164
64shortc10 Registered User Join Date: Jan 2007 Location: Winters, Ca. Posts: 1,069	Re: Dino63's 66SWB Dino, Just wondering if you had a chance to measure your c-notch for me yet? I'll definetly take you up on the test ride, I will be in Buckeye on the 15th of next month. I look foward to meeting you and Nathan, and seeing the Green Monster! Hopefully while i'm there I can buy a set of cool hood hinges like the ones on yours. Thanks Tony from Norcal

08-31-2007, 01:45 AM	#167
azfab Registered User Join Date: Aug 2007 Location: lodi ca Posts: 251	Re: Dino63's 66SWB where do i go to get a dropmember? what do they run?

09-07-2007, 08:51 PM	#169
7071Bluck Registered User Join Date: Jul 2006 Location: Missouri Posts: 60	Re: Dino63's 66SWB I am wanting to know what you are doing with the steering I found a price for the drop member but how much more is it gonna cost to make it driveable

09-15-2007, 09:20 PM	#171
mlane65 Registered User Join Date: Jul 2007 Location: DANVILLE IL. Posts: 8	Re: Dino63's 66SWB hey Nathan, did you alter the wheelbase on Dinos 66 ,or did you just swing the trailing arms up and center your notch ? thanks for info!

09-15-2007, 10:50 PM	#173
jasonb72 PorterBuilt Man Crush Join Date: Jul 2007 Location: Allen, tx Posts: 291	Re: Dino63's 66SWB Nate, If you get this post in time call me please. 214-536-5494 __________________ The 72 will live again

09-16-2007, 12:59 PM	#174
1963chevyshort New Member Join Date: Mar 2007 Location: Houston,TX Posts: 261	Re: Dino63's 66SWB Hey Dino or Nathan, Could i see a shot of the front shock mount. For some reason mine looks different or maybe i am looking at mine wrong. __________________ Anthony 63 chevy stepside SWB 57 chevy 2dr hrdtop belair



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.