Project: Bolt one on - Page 7 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**jaros44sr** · 05-22-2008, 02:21 PM

Quote:

Originally Posted by grendel

I am looking forward to finishing this thing off.

Looks like all the hard work is done, S/B able to hang the panels now with all the pcs. ya have at your shop

*FormerMember* · 05-22-2008, 08:37 PM

Quote:

Originally Posted by jaros44sr

Looks like all the hard work is done, S/B able to hang the panels now with all the pcs. ya have at your shop

Actually the hard work hasn't even started yet. EFI programming, turbo, exhaust, NorthWest Fab Black Box. Rebuild a 205 with 32 sppline everything, cable shifters, 2 piece front drive shaft. Build a roll cage around the rocker boxes that tie into the frame, with seat mounts.

Big J · 05-22-2008, 10:02 PM

Nice progress. I need to start cutting and welding on mine again.

**jaros44sr** · 05-22-2008, 11:41 PM

Quote:

Originally Posted by grendel

Actually the hard work hasn't even started yet. EFI programming, turbo, exhaust, NorthWest Fab Black Box. Rebuild a 205 with 32 sppline everything, cable shifters, 2 piece front drive shaft. Build a roll cage around the rocker boxes that tie into the frame, with seat mounts.

Ya but....that's all the fun stuff you have control over, if'n it's at some other place, you can't control it. Now it's up to you and that is the fun part. Hanging steel is not fun, that's why everyone doesn't do it

Chevyman63 · 05-23-2008, 12:19 AM

Quote:

Originally Posted by jaros44sr

Ya but....that's all the fun stuff you have control over, if'n it's at some other place, you can't control it. Now it's up to you and that is the fun part. Hanging steel is not fun, that's why everyone doesn't do it

*FormerMember* · 05-23-2008, 02:17 AM

Quote:

Originally Posted by jaros44sr

Ya but....that's all the fun stuff you have control over, if'n it's at some other place, you can't control it. Now it's up to you and that is the fun part. Hanging steel is not fun, that's why everyone doesn't do it

Ok, so when are you coming to do it?

jb4short · 05-23-2008, 02:32 AM

Quote:

Originally Posted by grendel

Ok, so when are you coming to do it?

Hey- get your own Jaros

**jaros44sr** · 05-23-2008, 02:40 AM

Quote:

Originally Posted by Tri-ProAutomotive

Hey- get your own Jaros

Yeah, I only have 4 projects going at once

*FormerMember* · 05-23-2008, 02:46 AM

Quote:

Originally Posted by Tri-ProAutomotive

Hey- get your own Jaros

Heh, he's the one popping off about the fun stuff, the tough stuff being done and how easy it is.

Quote:

Originally Posted by jaros44sr

Yeah, I only have 4 projects going at once

I currently have 3 of my own and 2 I am working on for other people.

**jaros44sr** · 05-23-2008, 02:53 AM

Quote:

Originally Posted by grendel

Ok, so when are you coming to do it?

Sorry, but I would have to classify you as GU...Geographically Undesireable, just to far to travel

But, one never knows, I would like to visit the New England area. Nice scenery, good people

Never said it was easy, just fun

*FormerMember* · 05-23-2008, 03:20 AM

Quote:

Originally Posted by jaros44sr

Sorry, but I would have to classify you as GU...Geographically Undesireable, just to far to travel

But, one never knows, I would like to visit the New England area. Nice scenery, good people

Never said it was easy, just fun

Well, if you happen to come this way, I'll BBQ some tips and provide some good beer, just for passing through.

**jaros44sr** · 05-23-2008, 03:28 AM

Quote:

Originally Posted by grendel

Well, if you happen to come this way, I'll BBQ some tips and provide some good beer, just for passing through.

I may take you up on that, fishing and the fall run of stripers. Plus I be able to talk to a truck guy...what more could u ask for

jb4short · 05-23-2008, 03:30 AM

I'll drop you off on my way to Maine Jim

**jaros44sr** · 05-23-2008, 03:34 AM

Quote:

Originally Posted by Tri-ProAutomotive

I'll drop you off on my way to Maine Jim

I'm surprised you guys are being so hospitable to a flatlander

*FormerMember* · 05-23-2008, 06:08 AM

Quote:

Originally Posted by Tri-ProAutomotive

I'll drop you off on my way to Maine Jim

Heh, we may head up with you... my wife's parents live in Dover-Foxcroft

Quote:

Originally Posted by jaros44sr

I'm surprised you guys are being so hospitable to a flatlander

Eh, Yankee Hospitality does exist, once you get outside of Yuppieville.

I have a pond on my property with good size Bass in it. I am also about 30 minutes to a couple of good spots on the Atlantic for Striper...

**jaros44sr** · 05-23-2008, 01:55 PM

Quote:

Originally Posted by Tri-ProAutomotive

I'll drop you off on my way to Maine Jim

Are going to the Shore-ah?

vtblazer · 05-24-2008, 01:22 PM

Hoping for a break in the weather cause this thing needs to be put outside for a lot of media-blasting.

Windshield frame and 80% of the dash need attention.
Firewall as well but no pics of that currently.

vtblazer · 05-28-2008, 01:07 AM

Found more rust than anticipated but after 5 bags of media it's all gone.

Dash and windshield frame had the majority of it.

Blasted, etched and primed.

vtblazer · 05-28-2008, 12:37 PM

...forgot to post the pics of the drivers quarter.

Sanded to bare metal, etched and primed but no body work.

*FormerMember* · 07-23-2008, 12:45 PM

So, this is back in my hands now.

Heading down to NJ shortly to pick up doors, fenders and a cowl hood for it.

Then it's off for Rhino lining and paint.

I am installing the Black Box and t-case shortly.

msgross · 07-23-2008, 01:25 PM

Did you do etching primer over the bare blasted metal...?? then what primer is next (epoxy?)

I'm trying to plan my next steps on my cab. Looking good though.

jb4short · 07-23-2008, 02:05 PM

nice work Kurt

*FormerMember* · 07-23-2008, 02:48 PM

Quote:

Originally Posted by Tri-ProAutomotive

nice work Kurt

So Jon, I need the sheet metal to complete this

vtblazer · 07-23-2008, 02:48 PM

Quote:

Originally Posted by msgross

Did you do etching primer over the bare blasted metal...?? then what primer is next (epoxy?)

I'm trying to plan my next steps on my cab. Looking good though.

Quote:

Originally Posted by vtblazer

Blasted, etched and primed.

Correct, bare metal/etching primer/epoxy primer

Quote:

Originally Posted by Tri-ProAutomotive

nice work Kurt

Thanks Jon, have any cowl induction hoods in stock?

*FormerMember* · 07-23-2008, 02:54 PM

Quote:

Originally Posted by vtblazer

Correct, bare metal/etching primer/epoxy primer

Thanks Jon, have any cowl induction hoods in stock?

I am picking up stuff from Jon shortly, if you want me to bring one back for you.

05-22-2008, 10:02 PM	#153
Big J Its lookin' like a Blazer! Join Date: Aug 2003 Location: Gods Country, KY Posts: 1,772	Re: Project: Bolt one on Nice progress. I need to start cutting and welding on mine again. __________________ BAZINGA! My Build

05-23-2008, 03:30 AM	#163
jb4short Damn Yankee Join Date: Feb 2007 Location: Lynchburg, VA Posts: 2,261	Re: Project: Bolt one on I'll drop you off on my way to Maine Jim

05-24-2008, 01:22 PM	#167
vtblazer Registered User Join Date: Oct 2003 Location: Central Vermont Posts: 8,537	Re: Project: Bolt one on Hoping for a break in the weather cause this thing needs to be put outside for a lot of media-blasting. Windshield frame and 80% of the dash need attention. Firewall as well but no pics of that currently. Attached Images

05-28-2008, 01:07 AM	#168
vtblazer Registered User Join Date: Oct 2003 Location: Central Vermont Posts: 8,537	Re: Project: Bolt one on Found more rust than anticipated but after 5 bags of media it's all gone. Dash and windshield frame had the majority of it. Blasted, etched and primed. Attached Images

05-28-2008, 12:37 PM	#169
vtblazer Registered User Join Date: Oct 2003 Location: Central Vermont Posts: 8,537	Re: Project: Bolt one on ...forgot to post the pics of the drivers quarter. Sanded to bare metal, etched and primed but no body work. Attached Images Last edited by vtblazer; 05-28-2008 at 12:46 PM.

07-23-2008, 12:45 PM	#170
FormerMember Account Suspended Join Date: Feb 2004 Posts: 3,051	Re: Project: Bolt one on So, this is back in my hands now. Heading down to NJ shortly to pick up doors, fenders and a cowl hood for it. Then it's off for Rhino lining and paint. I am installing the Black Box and t-case shortly.

07-23-2008, 01:25 PM	#171
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: Project: Bolt one on Did you do etching primer over the bare blasted metal...?? then what primer is next (epoxy?) I'm trying to plan my next steps on my cab. Looking good though. __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer"

07-23-2008, 02:05 PM	#172
jb4short Damn Yankee Join Date: Feb 2007 Location: Lynchburg, VA Posts: 2,261	Re: Project: Bolt one on nice work Kurt



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.