Do you need '64-'66 Chevy Truck Parts?

[wild one]

Tony,

Hello, I'm looking for a factory A/C setup for a 64-66, specifically the vents, controls, and evaporator/heater box-case (all of the inside the cab parts) . I have a 66 C10 panel truck with the two speed fan and firewall mounted heater box and would like to upgrade/add A/C to my truck. I plan on modifying the system to use R134a and use a one off compressor - most likely a sanden unit and will be purchasing new condensor and evaporator coils as well as fabricating the refrigerant lines and brackets for this application. Any help is appreciated.

Thanks in advance,
Pete

[scotts62]

Do you have any good bed sides for a short stepside bed? I have the outer fenders, front cab panel and tailgate but no bed sides..
Pm me if you do, dont worry about checkng shipping ill make the drive if you have them.

Thanks, Scott

[1966gmc]

1966 Pass side bed side.Short fleet?

[DWC]

Tony,

It looks like I need a passenger side motor mount tower V8 small block, the one in my truck is from a 6cyl. (see thread in 60-66 forum). Would you have such a part?

Thanks, Dave

[tomlamb]

Tony,

I am looking for the passenger side E-brake intermediate cable support rod, would you have such a beast?

Thanks,

Tom

[shortbed70]

Do you have any posi rearend for a coil sprung rear 65. Hopefully in the 3.73-4.11 gear?

[Bob'sK10CHEVY]

Hey Tony,
Have you had any luck getting the V8 engine perches? I am in desperate need I have my paint guys shop tied up.

[louie_trucks]

Hi,

I am looking for the rear cab braces for a 65 suburban, the one just at the back edge of the door. I have been told they are different than the pick up but have not compared them yet myself. Do you have any and if so how much?

Thanks,
louie_trucks
Aka Darrell Atlanta Ga

[LILRED66]

Originally Posted by DWC

Tony,

I have a question I was hoping you could help me with, how hard is it to find a chrome rear bumper for a 66' Suburban. My truck currently has the white painted bumpers front and rear and I would like to upgrade. I can buy repro front bumper but have yet to see a Suburban rear. Someone told me the rear bumper is the same as the front but I don't think that's true. I would take my front off and try it but the PO welded the bumpers to the brackets, who knows why?

Thanks for your help, Dave

Dave:

Unfortunately, I don't have any personal, first-hand experience with the Suburbans or Panels, therefore I can not speak to the fit-up of the front or rear bumpers or the interchangeability of them between the Suburbans/Panels and trucks.

Sorry I couldn't be more help to you.

[LILRED66]

Originally Posted by 68c10owner

Tony, would you happen to have a nice 62 chevy grill?

Anthony:

I don't have a '62 grille assembly at this time. Sorry I couldn't help.

[LILRED66]

Originally Posted by Tuffy66

Just curious if you got right and left fenders for a 66. Possibly even a end gate for a fleetside long box. Curious on prices. It would be shipped to North Dakota (58788) Thanks

I am fresh out of quality front fenders at this time, howver I do have a few good, used fleetside tailgates. A good, used, rust-free fleetside tailgate is $125.00, plus $60.00 packaging & shipping, via UPS, Ground.

Please let me know if I can help you with this part or other 4-5-6 Chevy Truck parts in the future.

[LILRED66]

Originally Posted by jonathan-m

Hi Tony,
I am in need of three things.
First, an original steering wheel.

Second, an original radio for a 66. (I would actually prefer a non working one, as I'm going to be modifying it.)

and third, an original antenna

could you Pm me with prices on those items if you've got them?

Thanks
Jon

Jon:

Sorry for my delay in responding. Do you still need a factory steering wheel, factory AM radio and factory antenna? If so, let me know and I will check to see what I have. I am out of town until June 4th, so it will be a while before I can get back to you.

[jonathan-m]

Ya, sure do. Take your time Tony, I'm in no rush at all.

[LILRED66]

Originally Posted by Bob'sK10CHEVY

Hey Tony,
Have you had any luck getting the V8 engine perches? I am in desperate need I have my paint guys shop tied up.

Bob:

Here is a quick run-down of the V8 engine perches. I found a pair of V8 and six cylinder engine perches. Since I planned to be in Medford, OR visiting my family and working for my younger brother for three weeks, I had both sets shipped to his shop in OR. The goal was to have a pattern made of both sets, in order to reproduce them, if possible. I have sandblasted both sets and am having both sets powder-coated in underhood black on Monday. I am meeting with a fabricator on Tuesday, to see if he can reproduce them. I will be sending them to you on Wednesday, May 28th from Medford, OR.

I really wanted to, at least make a pattern, before shipping them, just in case we could reproduce them. They have been so hard to locate, I was afraid it would be some time before I could find another pair, if I let them get away. I am very sorry for the delay, but you will have a pristine set, ready to install, when you receive them.

[LILRED66]

Originally Posted by wild one

Tony,

Hello, I'm looking for a factory A/C setup for a 64-66, specifically the vents, controls, and evaporator/heater box-case (all of the inside the cab parts) . I have a 66 C10 panel truck with the two speed fan and firewall mounted heater box and would like to upgrade/add A/C to my truck. I plan on modifying the system to use R134a and use a one off compressor - most likely a sanden unit and will be purchasing new condensor and evaporator coils as well as fabricating the refrigerant lines and brackets for this application. Any help is appreciated.

Thanks in advance,
Pete

Pete:

Sorry for my delay in responding, but I have been out of town visiting family and working for my brother in Medford, OR for the past few weeks. I will be returning to my shop on June 5th, so I can jump on this. I have a few complete factory AC systems, but I will have to double-check, to ensure it is complete and the overall condition. I will follow-up with you soon and thanks for your interest.

[LILRED66]

Originally Posted by scotts62

Do you have any good bed sides for a short stepside bed? I have the outer fenders, front cab panel and tailgate but no bed sides..
Pm me if you do, dont worry about checkng shipping ill make the drive if you have them.

Thanks, Scott

Scott:

I have a good pair of swb fleetside bed sides...they are loose and in good, used condition. I am out of town visiting family and working until June 5th, so I will have to jump on this upon my return. Thanks for your interest and I will keep you posted.

[LILRED66]

Originally Posted by 1966gmc

1966 Pass side bed side.Short fleet?

I have a good pair of swb fleetside bed sides...they are loose and in good, used condition. I am out of town visiting family and working until June 5th, so I will have to jump on this upon my return. Thanks for your interest and I will keep you posted.

[LILRED66]

Originally Posted by DWC

Tony,

It looks like I need a passenger side motor mount tower V8 small block, the one in my truck is from a 6cyl. (see thread in 60-66 forum). Would you have such a part?

Thanks, Dave

Dave:

I have what are looking for, but I am out of town until June 5th. Can you wait this long?

[LILRED66]

Originally Posted by tomlamb

Tony,

I am looking for the passenger side E-brake intermediate cable support rod, would you have such a beast?

Thanks,

Tom

Tom:

I have what you need, but I am out of town until June 5th. Can you wait this long?

[LILRED66]

Originally Posted by shortbed70

Do you have any posi rearend for a coil sprung rear 65. Hopefully in the 3.73-4.11 gear?

I have a few factory rearends, but I will have to double-check if they are posi-traction. I am certain they are all 3.73:1, because that was factory equipment in the 4-5-6 1/2 ton Chevy trucks.

[LILRED66]

Originally Posted by louie_trucks

Hi,

I am looking for the rear cab braces for a 65 suburban, the one just at the back edge of the door. I have been told they are different than the pick up but have not compared them yet myself. Do you have any and if so how much?

Thanks,
louie_trucks
Aka Darrell Atlanta Ga

Darrell:

Thanks for the inquiry. I don't have any Surburban specific parts. Sorry I couldn't help you with these parts, but thanks for the inquiry and please keep me in mind for other 4-5-6 Chevy Truck parts in the future.

[shortbed70]

Ok let me know a price if avalible.

[joe231]

hey Tony, I'm interested in a complete a/c set up also (with the factory dash, if possible), no hurry, when ever you get a chance I would like pics, list of parts, and price. Thanks
also would like prices on the short fleet bed sides also, thanks, Joe

[kdrodworks316]

Hey Tony, I know you are not the burban man, but its worth a try. I need the upper latch and control rod for the drivers side rear barn door. you got anything? thanks

[wild one]

Thanks Tony, keep me posted.