my radical 60 build - Page 7 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

joe231 · 05-04-2009, 11:18 PM

Oh sorry, I forgot..

Name: action-smiley-028.gif
Views: 2057
Size: 1.0 KB

muddpile · 05-05-2009, 01:14 AM

Looks like some more evidence of a chop and possibly a custom dash. I'm liking it!

**ChiefRocka** · 05-05-2009, 07:18 AM

jonzcustomshop · 08-02-2009, 07:14 PM

here is where it starts, laying down the tape and measurements.
I used 2 pieces of 1.5 inch masking tape to get the 3 inch cut.
since I am going to be using a different, better roof I have some extra measurements put down, so I could see exactly where to lay the tape in the same spot on the other roof.

jonzcustomshop · 08-02-2009, 07:15 PM

you can see where I will trim for the big back window.
and more shots of getting all the measurements figured out BEFORE I cut!
since the top of the orange door was wiped out by a giant mirror I will be using the post off another door that was junk on the bottom

jonzcustomshop · 08-02-2009, 07:16 PM

getting the cuts lined up for the doors
you can see the new profile of the side window, and also notice to the rear of the post that it does not line up, there is about a 1/2 inch difference because of the post moving at an angle, but the roof moving straight down.

jonzcustomshop · 08-02-2009, 07:16 PM

door frames are cut, and it is point of no return, the top is off!
you can see the angle iron that I welded inside the cab to make sure nothing moved after the top was cut off.

jonzcustomshop · 08-02-2009, 07:17 PM

a good shot of the cross section of the roof and door pillar.
the last shot shows the roof with the skin off. I will reuse the inner headliner panel on the new roof.
I was going to use the roof skin too, but as you can see mice got in to the header panel and rusted everything up.
I will have to use the skin off another truck....

jonzcustomshop · 08-02-2009, 07:18 PM

the pieces I will reuse off the old roof (in the first shot you can see the bottom of the roof skin is surface rusted, when I went after it with a makita equiped with a wire brush, I blew holes all through the rust area.)

the last two shots show how the roof will need to be widened. the posts are lined up on the passenger side, and on the driver side they end up being about 3/4 of an inch off.

jonzcustomshop · 08-02-2009, 07:18 PM

more of it being too narrow, and the new profile!

jonzcustomshop · 08-02-2009, 07:19 PM

008 I am going to lay down 16 blank posts here, and will get to editing in the pics of the chop.....

jonzcustomshop · 08-02-2009, 07:20 PM

009 I am going to lay down 16 blank posts here, and will get to editing in the pics of the chop.....

jonzcustomshop · 08-02-2009, 07:20 PM

010 I am going to lay down 16 blank posts here, and will get to editing in the pics of the chop.....

jonzcustomshop · 08-02-2009, 07:21 PM

011 I am going to lay down 16 blank posts here, and will get to editing in the pics of the chop.....

jonzcustomshop · 08-02-2009, 07:21 PM

012 I am going to lay down 16 blank posts here, and will get to editing in the pics of the chop.....

jonzcustomshop · 08-02-2009, 07:22 PM

013 I am going to lay down 16 blank posts here, and will get to editing in the pics of the chop.....

jonzcustomshop · 08-02-2009, 07:22 PM

014 I am going to lay down 16 blank posts here, and will get to editing in the pics of the chop.....

jonzcustomshop · 08-02-2009, 07:23 PM

015 I am going to lay down 16 blank posts here, and will get to editing in the pics of the chop.....

jonzcustomshop · 08-02-2009, 07:24 PM

016 I am going to lay down 16 blank posts here, and will get to editing in the pics of the chop.....

jonzcustomshop · 08-02-2009, 07:25 PM

outside for the first time in almost a year!

now I have my work cut out for me with the windshield.

Alan's Classic · 08-02-2009, 08:00 PM

Nice Jon!! I've been patiently waiting for your progress. Can't wait for your step by step

FRENCHBLUE72 · 08-02-2009, 09:02 PM

Wow man that is killer! Glad to see ya got her completed......kinda.

dieselarmy13 · 08-02-2009, 10:14 PM

Damn

protrash64 · 08-02-2009, 10:18 PM

My brain almost had a meltdown just lookin' at the pics!!!

You are the man!!!

Incredible result(as they say in plastic surgery (@)(@)).

daverod · 08-02-2009, 11:08 PM

It's alive!! It's alive

Cool build. How are you going to do the windshield?

05-04-2009, 11:18 PM	#151
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: my radical 60 build Oh sorry, I forgot.. __________________ *CHEVY ONLY*

05-05-2009, 01:14 AM	#152
muddpile Registered User Join Date: Dec 2004 Location: Saskatchewan, Canada Posts: 1,371	Re: my radical 60 build Looks like some more evidence of a chop and possibly a custom dash. I'm liking it! __________________ 1964 Chevy Short Fleet: Tornado 1972 Chevy C10: Fast Orange Secondaries Wide Open

05-05-2009, 07:18 AM	#153
ChiefRocka Hollister, CA. Join Date: Sep 2006 Location: Hollister, Ca. Posts: 6,150	Re: my radical 60 build __________________ John What the Heck is that ?? CURRENT BUILDS: 62 BurbMaster Other Builds: My '63 C-10,LWB,CC,BBW '06 HD StrAight Axle Swap Father/Son '67 C-20, LQ9,4L80,Bagged,8-Lugger !!Good Friend Richard's Build AMERICAN CUSTOMS & CLASSICS (831) 630-1965 www.ACCHOLLISTER.com ACC on FACEBOOK "Rest in Peace, Mom & Dad ... I will see you again someday!"

08-02-2009, 07:14 PM	#154
jonzcustomshop 1961 crewcab Join Date: Dec 2007 Location: missoula, mt Posts: 6,164	Re: my radical 60 build here is where it starts, laying down the tape and measurements. I used 2 pieces of 1.5 inch masking tape to get the 3 inch cut. since I am going to be using a different, better roof I have some extra measurements put down, so I could see exactly where to lay the tape in the same spot on the other roof. Attached Images Last edited by jonzcustomshop; 03-06-2010 at 06:01 AM.

08-02-2009, 07:15 PM	#155
jonzcustomshop 1961 crewcab Join Date: Dec 2007 Location: missoula, mt Posts: 6,164	Re: my radical 60 build you can see where I will trim for the big back window. and more shots of getting all the measurements figured out BEFORE I cut! since the top of the orange door was wiped out by a giant mirror I will be using the post off another door that was junk on the bottom Attached Images Last edited by jonzcustomshop; 03-06-2010 at 06:06 AM.

08-02-2009, 07:16 PM	#156
jonzcustomshop 1961 crewcab Join Date: Dec 2007 Location: missoula, mt Posts: 6,164	Re: my radical 60 build getting the cuts lined up for the doors you can see the new profile of the side window, and also notice to the rear of the post that it does not line up, there is about a 1/2 inch difference because of the post moving at an angle, but the roof moving straight down. Attached Images Last edited by jonzcustomshop; 03-06-2010 at 06:09 AM.

08-02-2009, 07:16 PM	#157
jonzcustomshop 1961 crewcab Join Date: Dec 2007 Location: missoula, mt Posts: 6,164	Re: my radical 60 build door frames are cut, and it is point of no return, the top is off! you can see the angle iron that I welded inside the cab to make sure nothing moved after the top was cut off. Attached Images Last edited by jonzcustomshop; 03-06-2010 at 06:12 AM.

08-02-2009, 07:17 PM	#158
jonzcustomshop 1961 crewcab Join Date: Dec 2007 Location: missoula, mt Posts: 6,164	Re: my radical 60 build a good shot of the cross section of the roof and door pillar. the last shot shows the roof with the skin off. I will reuse the inner headliner panel on the new roof. I was going to use the roof skin too, but as you can see mice got in to the header panel and rusted everything up. I will have to use the skin off another truck.... Attached Images Last edited by jonzcustomshop; 03-06-2010 at 06:17 AM.

08-02-2009, 07:18 PM	#159
jonzcustomshop 1961 crewcab Join Date: Dec 2007 Location: missoula, mt Posts: 6,164	Re: my radical 60 build the pieces I will reuse off the old roof (in the first shot you can see the bottom of the roof skin is surface rusted, when I went after it with a makita equiped with a wire brush, I blew holes all through the rust area.) the last two shots show how the roof will need to be widened. the posts are lined up on the passenger side, and on the driver side they end up being about 3/4 of an inch off. Attached Images Last edited by jonzcustomshop; 03-06-2010 at 06:22 AM.

08-02-2009, 07:18 PM	#160
jonzcustomshop 1961 crewcab Join Date: Dec 2007 Location: missoula, mt Posts: 6,164	Re: my radical 60 build more of it being too narrow, and the new profile! Attached Images Last edited by jonzcustomshop; 03-06-2010 at 06:23 AM.

08-02-2009, 07:19 PM	#161
jonzcustomshop 1961 crewcab Join Date: Dec 2007 Location: missoula, mt Posts: 6,164	Re: my radical 60 build 008 I am going to lay down 16 blank posts here, and will get to editing in the pics of the chop..... Attached Images Last edited by jonzcustomshop; 08-02-2009 at 08:21 PM.

08-02-2009, 07:20 PM	#162
jonzcustomshop 1961 crewcab Join Date: Dec 2007 Location: missoula, mt Posts: 6,164	Re: my radical 60 build 009 I am going to lay down 16 blank posts here, and will get to editing in the pics of the chop..... Attached Images Last edited by jonzcustomshop; 08-02-2009 at 08:22 PM.

08-02-2009, 07:20 PM	#163
jonzcustomshop 1961 crewcab Join Date: Dec 2007 Location: missoula, mt Posts: 6,164	Re: my radical 60 build 010 I am going to lay down 16 blank posts here, and will get to editing in the pics of the chop..... Attached Images Last edited by jonzcustomshop; 08-02-2009 at 08:25 PM.

08-02-2009, 07:21 PM	#164
jonzcustomshop 1961 crewcab Join Date: Dec 2007 Location: missoula, mt Posts: 6,164	Re: my radical 60 build 011 I am going to lay down 16 blank posts here, and will get to editing in the pics of the chop..... Attached Images Last edited by jonzcustomshop; 08-02-2009 at 08:28 PM.

08-02-2009, 07:21 PM	#165
jonzcustomshop 1961 crewcab Join Date: Dec 2007 Location: missoula, mt Posts: 6,164	Re: my radical 60 build 012 I am going to lay down 16 blank posts here, and will get to editing in the pics of the chop..... Attached Images Last edited by jonzcustomshop; 08-02-2009 at 08:29 PM.



Register or Log In To remove these advertisements.

08-02-2009, 07:22 PM	#166
jonzcustomshop 1961 crewcab Join Date: Dec 2007 Location: missoula, mt Posts: 6,164	Re: my radical 60 build 013 I am going to lay down 16 blank posts here, and will get to editing in the pics of the chop..... Attached Images Last edited by jonzcustomshop; 08-02-2009 at 08:31 PM.

08-02-2009, 07:22 PM	#167
jonzcustomshop 1961 crewcab Join Date: Dec 2007 Location: missoula, mt Posts: 6,164	Re: my radical 60 build 014 I am going to lay down 16 blank posts here, and will get to editing in the pics of the chop..... Attached Images Last edited by jonzcustomshop; 08-02-2009 at 08:33 PM.

08-02-2009, 07:23 PM	#168
jonzcustomshop 1961 crewcab Join Date: Dec 2007 Location: missoula, mt Posts: 6,164	Re: my radical 60 build 015 I am going to lay down 16 blank posts here, and will get to editing in the pics of the chop..... Attached Images Last edited by jonzcustomshop; 08-02-2009 at 08:34 PM.

08-02-2009, 07:24 PM	#169
jonzcustomshop 1961 crewcab Join Date: Dec 2007 Location: missoula, mt Posts: 6,164	Re: my radical 60 build 016 I am going to lay down 16 blank posts here, and will get to editing in the pics of the chop..... Attached Images Last edited by jonzcustomshop; 08-02-2009 at 08:35 PM.

08-02-2009, 07:25 PM	#170
jonzcustomshop 1961 crewcab Join Date: Dec 2007 Location: missoula, mt Posts: 6,164	Re: my radical 60 build outside for the first time in almost a year! now I have my work cut out for me with the windshield. Attached Images

08-02-2009, 08:00 PM	#171
Alan's Classic 1 thing at a time is progress. Join Date: Jun 2007 Location: Ball Ground GA Posts: 5,511	Re: my radical 60 build Nice Jon!! I've been patiently waiting for your progress. Can't wait for your step by step __________________ Alan Philippians 2:14-16 Alan's Classic Facebook page. North Georgia Group Project 1965 Vitamin C-10 1995 GMC Sierra K1500 The "Wrecker"

08-02-2009, 09:02 PM	#172
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,606	Re: my radical 60 build Wow man that is killer! Glad to see ya got her completed......kinda. __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

08-02-2009, 10:14 PM	#173
dieselarmy13 Phone's ringin Dude. Join Date: Mar 2007 Location: Colorado Springs Posts: 1,426	Re: my radical 60 build Damn __________________ I pitty the fool with only two headlights!! 2003 SILVERADO SS--THE NEW GIRL 1972 GMC--THE OLD GIRL

08-02-2009, 10:18 PM	#174
protrash64 Resistance is Futile Join Date: Dec 2006 Location: Mesa,Arizona Posts: 3,520	Re: my radical 60 build My brain almost had a meltdown just lookin' at the pics!!! You are the man!!! Incredible result(as they say in plastic surgery (@)(@)). __________________ 64 CHEVY PICK-UP > http://67-72chevytrucks.com/vboard/s...otrash+re-hash 64 CARRYALL >http://67-72chevytrucks.com/vboard/s...=1964+suburban 66 LB >http://67-72chevytrucks.com/vboard/s...d.php?t=427852 STRENGTH/DETERMINATION/MERCILESS/FOREVER .......posted via stationary device

08-02-2009, 11:08 PM	#175
daverod SSN 706 Join Date: Mar 2009 Location: Pocatello Idaho Posts: 3,821	Re: my radical 60 build It's alive!! It's alive Cool build. How are you going to do the windshield? Attached Images __________________ Daverods 64 C10 Daily driver 292 3 speed "Driver" Daverods 66 Build C10 Bags 350/350(On Hold) Daverods 52 Build 3100 S10 chassis,Bags, 350/700r4 "Click it" Last edited by daverod; 08-08-2009 at 09:37 AM.

Register or Log In To remove these advertisements.