Parting 1971 Suburban (NM) - Page 7 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

67ChevyRedneck · 05-10-2009, 01:28 AM

The center hump you already cut out?

**Hart_Rod** · 05-10-2009, 11:08 AM

Quote:

Originally Posted by 67ChevyRedneck

The center hump you already cut out?

I cut that out for 71Meangreen when he came to get the rear sit. Did I miss something? I looked back and didn't where you had asked for it, sorry if I missed it.

laplander · 05-10-2009, 11:53 AM

Hey Rob,
Do you have the second row and third row seat brackets and/or armrests?
thanks.

**Hart_Rod** · 05-10-2009, 01:25 PM

Quote:

Originally Posted by laplander

Hey Rob,
Do you have the second row and third row seat brackets and/or armrests?
thanks.

This is what I have left,

http://67-72chevytrucks.com/vboard/s...d.php?t=343143

67ChevyRedneck · 05-12-2009, 12:00 AM

That was my bad, I didn't ask for it in this thread, I mentioned it here:

http://67-72chevytrucks.com/vboard/s...226302&page=15

It's all good. That's something I won't need for a long time!

67ChevyRedneck · 05-12-2009, 12:02 AM

Crap, double post!

Scott's 69 burb · 05-12-2009, 04:36 AM

I am interested in the upper trim. I do not need the tailgate trim. However, I do need the corner trim. This is not available?

**Hart_Rod** · 05-12-2009, 09:42 AM

Quote:

Originally Posted by 67ChevyRedneck

That was my bad, I didn't ask for it in this thread, I mentioned it here:

http://67-72chevytrucks.com/vboard/s...226302&page=15

It's all good. That's something I won't need for a long time!

Sorry about that Jesse, I haven't looked at that thread in a while. I do have a bolt in high hump that I took out of my CrewCab. If you are interested in that let me know. I still have to cut the wheel lips off, been meaning to, but I've been sick the last couple of days.

Quote:

Originally Posted by Scott's 69 burb

I am interested in the upper trim. I do not need the tailgate trim. However, I do need the corner trim. This is not available?

Scott - welcome to the board! I'm using the corner pieces on my suburban. PM sent.

R/

67ChevyRedneck · 05-12-2009, 10:30 PM

It's OK, don't worry about it. I have a pristine high hump I've been hoarding too

I just figured since you were hacking 'er all up, I'd jump on it. Not a problem

**Hart_Rod** · 05-17-2009, 09:43 AM

It's finished!!!!!!!!!!!!!!!!!!!
.

kev2809 · 05-17-2009, 09:50 AM

no more parts?

**Hart_Rod** · 05-17-2009, 10:37 AM

Quote:

Originally Posted by kev2809

no more parts?

what ya lookin for?

WARLOCK CUSTOMS · 05-17-2009, 07:37 PM

i need one section that you may have !!! i want to delete the spare tire area by using the front section.

right rear area just below the long window. i need the front section,just enough to replace the indentation for the spare. how much shipped to envile tenn 38332?

pm me with an email address if you need a pic of what i'm referring to. thanks

kev2809 · 05-17-2009, 10:59 PM

do you still have the right tail light bucket?

**Hart_Rod** · 05-17-2009, 11:22 PM

Quote:

Originally Posted by kev2809

do you still have the right tail light bucket?

Are you talking about the piece that the lens screws to or are you talking abou the actual sheet metal?

kev2809 · 05-18-2009, 09:19 AM

besised that picture? mine is dented as it wraps around the side on the body line

**Hart_Rod** · 05-18-2009, 09:27 AM

Circle what you want and let me know.

R/

kev2809 · 05-18-2009, 12:16 PM

heres a pic of my suburban...let me know if ya got this piece.

[IMG]

[/IMG]

**Hart_Rod** · 05-18-2009, 08:13 PM

Quote:

Originally Posted by kev2809

heres a pic of my suburban...let me know if ya got this piece.

[IMG]

[/IMG]

I don't think mine is much better than yours. You can buy new reproduction panels of that area from Goodmark and TriPlus. I think they are less than a $100.

kev2809 · 05-18-2009, 09:07 PM

I might have to do that..I pretty much need that whole bottom side because its all rusted out right up to just after the front of the wheel well

**michael bustamante** · 05-19-2009, 11:48 AM

the thread just keeps going huh?

Good to finally meet you rob and thanks for everything
Mike
I`ll be calling you again soon if you dont call me first

slimbailess · 06-16-2009, 01:05 AM

hey rob, do you by chance have an extra tailgate latch, the one that bolts to the body?thanks,slim

kev2809 · 06-16-2009, 05:40 AM

not sure if I asked this yet but do you have a good wheel arch? I replaced a quarter panel and for some reason it didn't come with the arch edge impression, its just smooth. I only need about half of one on the driver side

**Hart_Rod** · 06-16-2009, 09:11 AM

Quote:

Originally Posted by slimbailess

hey rob, do you by chance have an extra tailgate latch, the one that bolts to the body?thanks,slim

I'm pretty sure I do. Can you post a picture of the one you're talking about?

Quote:

Originally Posted by kev2809

not sure if I asked this yet but do you have a good wheel arch? I replaced a quarter panel and for some reason it didn't come with the arch edge impression, its just smooth. I only need about half of one on the driver side

Sorry man, it's long gone...................

Ear Candy · 06-16-2009, 09:38 AM

is the gas tank w/ straps still available and do you know if it will work as a relocated SB 72 tank? Thanks

05-10-2009, 01:28 AM	#151
67ChevyRedneck Hittin E-Z Street on Mud Tires Join Date: Nov 2004 Location: Greenville, SC Posts: 23,090	Re: Parting 1971 Suburban (NM) The center hump you already cut out? __________________ Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride American Born, Country by the Grace of God 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications! Last edited by 67ChevyRedneck; 05-10-2009 at 01:29 AM.

05-10-2009, 11:53 AM	#153
laplander Registered User Join Date: Nov 2002 Location: NM Posts: 705	Re: Parting 1971 Suburban (NM) Hey Rob, Do you have the second row and third row seat brackets and/or armrests? thanks.

05-12-2009, 12:00 AM	#155
67ChevyRedneck Hittin E-Z Street on Mud Tires Join Date: Nov 2004 Location: Greenville, SC Posts: 23,090	Re: Parting 1971 Suburban (NM) That was my bad, I didn't ask for it in this thread, I mentioned it here: http://67-72chevytrucks.com/vboard/s...226302&page=15 It's all good. That's something I won't need for a long time! __________________ Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride American Born, Country by the Grace of God 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications!

05-12-2009, 12:02 AM	#156
67ChevyRedneck Hittin E-Z Street on Mud Tires Join Date: Nov 2004 Location: Greenville, SC Posts: 23,090	Re: Parting 1971 Suburban (NM) Crap, double post! __________________ Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride American Born, Country by the Grace of God 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications! Last edited by 67ChevyRedneck; 05-12-2009 at 12:02 AM.

05-12-2009, 04:36 AM	#157
Scott's 69 burb Registered User Join Date: Feb 2009 Location: Ashland, Ohio Posts: 1	Re: Parting 1971 Suburban (NM) I am interested in the upper trim. I do not need the tailgate trim. However, I do need the corner trim. This is not available?

05-12-2009, 10:30 PM	#159
67ChevyRedneck Hittin E-Z Street on Mud Tires Join Date: Nov 2004 Location: Greenville, SC Posts: 23,090	Re: Parting 1971 Suburban (NM) It's OK, don't worry about it. I have a pristine high hump I've been hoarding too I just figured since you were hacking 'er all up, I'd jump on it. Not a problem __________________ Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride American Born, Country by the Grace of God 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications!

05-17-2009, 09:43 AM	#160
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,858	Re: Parting 1971 Suburban (NM) It's finished!!!!!!!!!!!!!!!!!!! . Attached Images __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3

05-17-2009, 09:50 AM	#161
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,178	Re: Parting 1971 Suburban (NM) no more parts?

05-17-2009, 07:37 PM	#163
WARLOCK CUSTOMS Registered User Join Date: Dec 2008 Location: henderson,tenn Posts: 25	Re: Parting 1971 Suburban (NM) i need one section that you may have !!! i want to delete the spare tire area by using the front section. right rear area just below the long window. i need the front section,just enough to replace the indentation for the spare. how much shipped to envile tenn 38332? pm me with an email address if you need a pic of what i'm referring to. thanks

05-17-2009, 10:59 PM	#164
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,178	Re: Parting 1971 Suburban (NM) do you still have the right tail light bucket?

05-18-2009, 09:19 AM	#166
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,178	Re: Parting 1971 Suburban (NM) besised that picture? mine is dented as it wraps around the side on the body line

05-18-2009, 09:27 AM	#167
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,858	Re: Parting 1971 Suburban (NM) Circle what you want and let me know. R/ __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3

05-18-2009, 12:16 PM	#168
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,178	Re: Parting 1971 Suburban (NM) heres a pic of my suburban...let me know if ya got this piece. [IMG][/IMG]

05-18-2009, 09:07 PM	#170
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,178	Re: Parting 1971 Suburban (NM) I might have to do that..I pretty much need that whole bottom side because its all rusted out right up to just after the front of the wheel well

05-19-2009, 11:48 AM	#171
michael bustamante Senior Member Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,862	Re: Parting 1971 Suburban (NM) the thread just keeps going huh? Good to finally meet you rob and thanks for everything Mike I`ll be calling you again soon if you dont call me first __________________ 1967custom



Register or Log In To remove these advertisements.

06-16-2009, 01:05 AM	#172
slimbailess Registered User Join Date: Jul 2007 Location: Haltom City,TX Posts: 127	Re: Parting 1971 Suburban (NM) hey rob, do you by chance have an extra tailgate latch, the one that bolts to the body?thanks,slim

06-16-2009, 05:40 AM	#173
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,178	Re: Parting 1971 Suburban (NM) not sure if I asked this yet but do you have a good wheel arch? I replaced a quarter panel and for some reason it didn't come with the arch edge impression, its just smooth. I only need about half of one on the driver side

06-16-2009, 09:38 AM	#175
Ear Candy Registered User Join Date: May 2009 Location: Burlington, NC Posts: 49	Re: Parting 1971 Suburban (NM) is the gas tank w/ straps still available and do you know if it will work as a relocated SB 72 tank? Thanks

Register or Log In To remove these advertisements.