Nsane 52' Chevy Truck! - Page 7 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

quigman · 06-01-2011, 07:51 PM

I am doing a 6 liter swap into my 52, what did you do with the power steering pump? The truck unit has three lines, an you really only need two.

**Dieselwrencher** · 06-01-2011, 09:09 PM

Quote:

Originally Posted by Nsanehotrodz

Thanks! I discussed this with the owner of the truck and this is what he wanted, a smooth very clean look. I finished the detail work on the cab last night, so we're ready to bolt it back on the frame this week. I've made alot of progress on the "other truck" so I will start a build thread when this truck is finished. DeWayne

An easy cure for ths is to run solid engine mounts if anyone would be worried about that strain on the exhaust. Most rod shops I have talked with said they don't over tighten the inlet at the muffler to allow for some flex. They will use a stainless clamp to keep the clean look. Very nice build, and I'm loving all the work you have in there!

Nsanehotrodz · 06-21-2011, 10:28 PM

[quote=S10Fan;4675935]I see a "HushPower" muffler on the floor. How do you like those and how would they compare to the regular 50 series? Quieter, Louder?

The hushpower mufflers sound great on the truck, it has a low deep rumble to it at idle and really comes to life when you open it up. Thanks

Quote:

Originally Posted by quigman

I am doing a 6 liter swap into my 52, what did you do with the power steering pump? The truck unit has three lines, an you really only need two.

I'm swapping the pump out so I'm not real sure yet how its going to work? As soon as I get the new kit on after we finish the engine work and paint I'll let you know.

Quote:

Originally Posted by Dieselwrencher

An easy cure for ths is to run solid engine mounts if anyone would be worried about that strain on the exhaust. Most rod shops I have talked with said they don't over tighten the inlet at the muffler to allow for some flex. They will use a stainless clamp to keep the clean look. Very nice build, and I'm loving all the work you have in there!

Thanks for the tip!

Nsanehotrodz · 06-21-2011, 10:44 PM

We started the inner fenders today. The drivers side is tacked together and now its time to decide where the vents will go. The new bedsides should be here this week, so I blasted the rear fenders and will start the metal work on them tomorrow. DeWayne

**oldman3** · 06-21-2011, 11:01 PM

Nice work, looks good.....Jim

Nsanehotrodz · 06-28-2011, 09:12 PM

Thanks Jim! The new bed made it to the shop today, everything went together very smooth. I'll have the tail lights next week along with a few other parts. DeWayne

vintage_car · 06-29-2011, 10:38 AM

great looking build!!!! I'm really interested in the new inner fenders you are fabbing, please continue the pics on them, and I agree no more firewall pictures please, it's depressing!

Nsanehotrodz · 07-13-2011, 09:38 PM

Quote:

Originally Posted by vintage_car

great looking build!!!! I'm really interested in the new inner fenders you are fabbing, please continue the pics on them, and I agree no more firewall pictures please, it's depressing!

Thanks! Here are a few more of the rear fender repair.

Indian113 · 07-13-2011, 09:45 PM

Man you guy's do some great work,I like those inner fender too-I agree please hold off on firewall pictures. I get JEALOUS

Russell Ashley · 07-14-2011, 08:02 AM

You guys are good. I wish I could make patches fit up like that. Keep the pics coming.

vintage_car · 07-14-2011, 05:59 PM

How does that inner fender attach to the cab?
Posted via Mobile Device

LUV2XCLR8 · 07-14-2011, 06:33 PM

Wish you were closer, I'd have mine over there right now
for some body panel squaring and custom inner fenders !

Nsanehotrodz · 07-14-2011, 09:50 PM

Quote:

Originally Posted by Indian113

Man you guy's do some great work,I like those inner fender too-I agree please hold off on firewall pictures. I get JEALOUS

Sorry I had to include the friewall to show the inner fenders

Quote:

Originally Posted by Russell Ashley

You guys are good. I wish I could make patches fit up like that. Keep the pics coming.

Thanks

Quote:

Originally Posted by vintage_car

How does that inner fender attach to the cab?
Posted via Mobile Device

I'll post pics of tht next week.

Quote:

Originally Posted by LUV2XCLR8

Wish you were closer, I'd have mine over there right now
for some body panel squaring and custom inner fenders !

I'll be out your way in a few weeks,

Here are a few more pics... The last pic is a teaser of the (other) truck!

BlueJeep · 07-14-2011, 10:27 PM

Did you hammer form that lower fender patch or what method did you use to bend that lip? If so, can you show pics of the form you made? Thanks!

Nsanehotrodz · 07-14-2011, 10:57 PM

No, I used a tipping wheel to make the lip and used a shrinker to make the bend. It was a little more involved than that, but if you need the complete run down I'll write up a small how to. DeWayne

BlueJeep · 07-14-2011, 11:43 PM

That'd be great, if you wouldn't mind.

Nsanehotrodz · 07-15-2011, 08:41 PM

I made the passenger side rear fender patch today and tacked it in place. here are a couple more pics. I will install the tail lights next week and finish the tailgate. DeWayne

hotrod1 · 07-15-2011, 09:24 PM

I would like to see the tools that you use and the sequence to get the finish product. Great work.

**Dieselwrencher** · 07-15-2011, 09:32 PM

Awesome work man!

Nsanehotrodz · 07-17-2011, 02:05 PM

Thanks guys, I'll try to post a complete (how-to) on the rear fender repair this coming week. I will be repairing the rear fenders on the other truck as we finish the metal work on the bed, so I will use it as the project truck.

DeWayne

hotrod1 · 07-17-2011, 02:09 PM

Thanks, that would be great. Any way to learn better sheet metal work is OK with me.

Leroy-B1 · 07-17-2011, 09:27 PM

Are you taking customers......not to far away and love your work
Posted via Mobile Device

ratty 46 · 07-18-2011, 12:14 AM

Nice patch work ...

Ratty 46

Nsanehotrodz · 07-20-2011, 10:25 PM

essner · 07-21-2011, 04:30 AM

Damn i wish i had those skills. i hope i can aquire at least half of that in the years to come. if you dont mind could you explain what you did to the frame and how. and id love to see the tools you have to get the job done. greatly appreciated, beautiful build and work !!!!

06-01-2011, 07:51 PM	#151
quigman Registered User Join Date: Jan 2011 Location: Tucson Arizona Posts: 30	Re: Nsane 52' Chevy Truck! I am doing a 6 liter swap into my 52, what did you do with the power steering pump? The truck unit has three lines, an you really only need two.

06-21-2011, 10:44 PM	#154
Nsanehotrodz Registered User Join Date: Jul 2010 Location: White Pine, TN Posts: 1,261	Re: Nsane 52' Chevy Truck! We started the inner fenders today. The drivers side is tacked together and now its time to decide where the vents will go. The new bedsides should be here this week, so I blasted the rear fenders and will start the metal work on them tomorrow. DeWayne

06-21-2011, 11:01 PM	#155
oldman3 Senior Member Join Date: Mar 2011 Location: West Plains, Missouri Posts: 7,559	Re: Nsane 52' Chevy Truck! Nice work, looks good.....Jim __________________ my build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=459839 Jimbo's long bed step build:http://67-72chevytrucks.com/vboard/s...t=464626<br />

06-28-2011, 09:12 PM	#156
Nsanehotrodz Registered User Join Date: Jul 2010 Location: White Pine, TN Posts: 1,261	Re: Nsane 52' Chevy Truck! Thanks Jim! The new bed made it to the shop today, everything went together very smooth. I'll have the tail lights next week along with a few other parts. DeWayne

06-29-2011, 10:38 AM	#157
vintage_car Registered User Join Date: Jul 2010 Location: Nashville, TN Posts: 198	Re: Nsane 52' Chevy Truck! great looking build!!!! I'm really interested in the new inner fenders you are fabbing, please continue the pics on them, and I agree no more firewall pictures please, it's depressing!

07-13-2011, 09:45 PM	#159
Indian113 Registered User Join Date: Sep 2009 Location: Monroe,Iowa Posts: 4,370	Re: Nsane 52' Chevy Truck! Man you guy's do some great work,I like those inner fender too-I agree please hold off on firewall pictures. I get JEALOUS

07-14-2011, 08:02 AM	#160
Russell Ashley Registered User Join Date: May 2010 Location: Lawrenceville, Ga Posts: 2,648	Re: Nsane 52' Chevy Truck! You guys are good. I wish I could make patches fit up like that. Keep the pics coming.

07-14-2011, 05:59 PM	#161
vintage_car Registered User Join Date: Jul 2010 Location: Nashville, TN Posts: 198	Re: Nsane 52' Chevy Truck! How does that inner fender attach to the cab? Posted via Mobile Device

07-14-2011, 06:33 PM	#162
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,468	Re: Nsane 52' Chevy Truck! Wish you were closer, I'd have mine over there right now for some body panel squaring and custom inner fenders ! __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Tow Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

07-14-2011, 10:27 PM	#164
BlueJeep Registered User Join Date: Mar 2008 Location: Waukee, Iowa Posts: 1,608	Re: Nsane 52' Chevy Truck! Did you hammer form that lower fender patch or what method did you use to bend that lip? If so, can you show pics of the form you made? Thanks! __________________ build threads: 86 Suburban 88 Jeep 6.0 swap 49 Chevy truck 54 Chevy wagon 86 Suburban lowered 4/6 54 Chevy wagon 49 Chevy/s10 mix 88 Jeep Wrangler rockcrawler

07-14-2011, 10:57 PM	#165
Nsanehotrodz Registered User Join Date: Jul 2010 Location: White Pine, TN Posts: 1,261	Re: Nsane 52' Chevy Truck! No, I used a tipping wheel to make the lip and used a shrinker to make the bend. It was a little more involved than that, but if you need the complete run down I'll write up a small how to. DeWayne

07-14-2011, 11:43 PM	#166
BlueJeep Registered User Join Date: Mar 2008 Location: Waukee, Iowa Posts: 1,608	Re: Nsane 52' Chevy Truck! That'd be great, if you wouldn't mind. __________________ build threads: 86 Suburban 88 Jeep 6.0 swap 49 Chevy truck 54 Chevy wagon 86 Suburban lowered 4/6 54 Chevy wagon 49 Chevy/s10 mix 88 Jeep Wrangler rockcrawler

07-15-2011, 08:41 PM	#167
Nsanehotrodz Registered User Join Date: Jul 2010 Location: White Pine, TN Posts: 1,261	Re: Nsane 52' Chevy Truck! I made the passenger side rear fender patch today and tacked it in place. here are a couple more pics. I will install the tail lights next week and finish the tailgate. DeWayne

07-15-2011, 09:24 PM	#168
hotrod1 56 - autocross Join Date: Apr 2010 Location: Camarillo, Ca Posts: 1,121	Re: Nsane 52' Chevy Truck! I would like to see the tools that you use and the sequence to get the finish product. Great work.

07-15-2011, 09:32 PM	#169
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,142	Re: Nsane 52' Chevy Truck! Awesome work man! __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*



Register or Log In To remove these advertisements.

07-17-2011, 02:05 PM	#170
Nsanehotrodz Registered User Join Date: Jul 2010 Location: White Pine, TN Posts: 1,261	Re: Nsane 52' Chevy Truck! Thanks guys, I'll try to post a complete (how-to) on the rear fender repair this coming week. I will be repairing the rear fenders on the other truck as we finish the metal work on the bed, so I will use it as the project truck. DeWayne

07-17-2011, 02:09 PM	#171
hotrod1 56 - autocross Join Date: Apr 2010 Location: Camarillo, Ca Posts: 1,121	Re: Nsane 52' Chevy Truck! Thanks, that would be great. Any way to learn better sheet metal work is OK with me.

07-17-2011, 09:27 PM	#172
Leroy-B1 Registered User Join Date: Dec 2010 Location: Mars Hill, NC Posts: 1,994	Re: Nsane 52' Chevy Truck! Are you taking customers......not to far away and love your work Posted via Mobile Device

07-18-2011, 12:14 AM	#173
ratty 46 Registered User Join Date: Jun 2009 Location: Atlanta, Ga. Posts: 1,104	Re: Nsane 52' Chevy Truck! Nice patch work ... Ratty 46

07-20-2011, 10:25 PM	#174
Nsanehotrodz Registered User Join Date: Jul 2010 Location: White Pine, TN Posts: 1,261	Re: Nsane 52' Chevy Truck!

07-21-2011, 04:30 AM	#175
essner Registered User Join Date: Jul 2011 Location: Hawaii Posts: 50	Re: Nsane 52' Chevy Truck! Damn i wish i had those skills. i hope i can aquire at least half of that in the years to come. if you dont mind could you explain what you did to the frame and how. and id love to see the tools you have to get the job done. greatly appreciated, beautiful build and work !!!!

Register or Log In To remove these advertisements.