How about some pics of Static Dropped C-10's - Page 7 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

RexDodge · 05-04-2012, 07:56 PM

Ripped some heated coils out and installed 2.5" spindles and 2" springs. Also did the lca mod to gain caster. Had to "massage" the upper spring pocket as the coil also moves forward when the lca moves

. After that a little work all fits great. This is with 15x8 torque thrust II and 235/60x15. The tire/wheel combo will do for now but I see changes in the future. Once I get the bed back on I'll post up more. A couple of pics...

RINC · 05-05-2012, 10:58 PM

Hi an Low

Both trucks are a night an day differance in the driving. I think I like the ride of me Dads lowered one.

outlawz916 · 05-07-2012, 03:09 PM

I wanna say this is about a 5.5/8 but i havent accurately measured it.

gumbys10 · 05-08-2012, 07:30 PM

Quote:

Originally Posted by outlawz916

I wanna say this is about a 5.5/8 but i havent accurately measured it.

You definetly have a unique looking truck, I would like to see the finished product for sure.

shawno72 · 05-08-2012, 08:06 PM

x2

DCoffey1972 · 05-09-2012, 10:09 AM

here is mine 4.5/6

fxdxharley · 05-09-2012, 12:57 PM

Quote:

Originally Posted by DCoffey1972

here is mine 4.5/6

Now i love that truck. steps have always been my favorite. looks great, clean and simple.

bcutt · 05-19-2012, 07:36 PM

Saw this truck at the GoodGuys in Nashville today. Very nice truck!

gearys 5600 · 05-20-2012, 07:43 PM

Quote:

Originally Posted by DCoffey1972

here is mine 4.5/6

Good looking stepper !!

DCoffey1972 · 05-20-2012, 10:07 PM

Thanks for the comments guys, when i started on it 3 years ago just wanted a clean looking truck to drive around and enjoy. Still alot left to do under hood & put the a/c back on it

northeimcustom · 05-26-2012, 09:02 PM

RexDodge · 05-30-2012, 09:08 PM

Finally got the stuff done under the bed and got it back on. It's just setting loose but it sure is nice to have it back on!

elf w/capital T · 06-05-2012, 11:15 PM

when i had it up and running...

a few months ago...

BlueEK9 · 06-07-2012, 01:49 AM

5.5" drop up front and 5" in the rear

I'll be throwing these rims on it and dropping rear another 2" before summer is over.

Posted via Mobile Device

ramega · 06-14-2012, 11:11 PM

[/IMG]heres my 68 i got from c10 king

ramega · 06-15-2012, 10:23 AM

ramega · 06-15-2012, 10:24 AM

Quote:

Originally Posted by ramega

my 68 got it fron c10 king

ramega · 06-15-2012, 10:26 AM

ramega · 06-15-2012, 10:29 AM

fastcam1 · 06-15-2012, 06:24 PM

That truck is looking sweet!!!

Quote:

Originally Posted by BlueEK9

5.5" drop up front and 5" in the rear

I'll be throwing these rims on it and dropping rear another 2" before summer is over.

Posted via Mobile Device

jlsanborn · 06-16-2012, 12:00 PM

Quote:

Originally Posted by RexDodge

Finally got the stuff done under the bed and got it back on. It's just setting loose but it sure is nice to have it back on!

Looks good man! Although, another LWB dead! RIP

What wheel / tire on the back? I'm ready to pull the trigger on springs and am struggling with what to get. I'll be 15x8 - 4.25 BS - 235/60-15 and 15x10 - 4.25 BS - 295/50-15. I've already got the 2.5" drop spindles and was all along thinking just a 1" spring to go with that, but seeing yours makes me wonder....

63c10longbed · 06-27-2012, 02:15 AM

My 64 longbed with 4.5" front 6" rear. CPP grand slam 2.5" spindles and 2" coils in front, 4" HD coils in rear with 2" blocks. 20x8.5 American Racing Marins. Currently undergoing transformation into a Blazer type roadster.

RexDodge · 06-27-2012, 11:04 AM

Quote:

Originally Posted by jlsanborn

Looks good man! Although, another LWB dead! RIP

What wheel / tire on the back? I'm ready to pull the trigger on springs and am struggling with what to get. I'll be 15x8 - 4.25 BS - 235/60-15 and 15x10 - 4.25 BS - 295/50-15. I've already got the 2.5" drop spindles and was all along thinking just a 1" spring to go with that, but seeing yours makes me wonder....

Sorry to not have responded sooner! I have the wheel/tire combo as you will be running. I hope to change that next year long with some wheel tub extensions (hint, hint). I am very happy with how my height turned out. I have decent ground clearance. I plan to drive this a lot and don't intend to nurse it in/out of parking lots and over those stinkin speed bumps. I did the lca relocation and had to do a little massaging on my spring pockets in the upper a arm and also had to notch the lower a arm to clear. Here is a pic after I lined the bed up with the cab.

jlsanborn · 06-27-2012, 09:31 PM

Quote:

Originally Posted by RexDodge

Sorry to not have responded sooner! I have the wheel/tire combo as you will be running. I hope to change that next year long with some wheel tub extensions (hint, hint). I am very happy with how my height turned out. I have decent ground clearance. I plan to drive this a lot and don't intend to nurse it in/out of parking lots and over those stinkin speed bumps. I did the lca relocation and had to do a little massaging on my spring pockets in the upper a arm and also had to notch the lower a arm to clear. Here is a pic after I lined the bed up with the cab.

What did you do in the rear? I was thinking a 5" spring and a little block to perfect the pinion angle? I've already done the trailing arm mounting bracket flip. 295/50-15 on 10"x15" - 4-1/4"bs.

Thanks for the advise!

RexDodge · 06-28-2012, 01:37 AM

Quote:

Originally Posted by jlsanborn

What did you do in the rear? I was thinking a 5" spring and a little block to perfect the pinion angle? I've already done the trailing arm mounting bracket flip. 295/50-15 on 10"x15" - 4-1/4"bs.

Thanks for the advise!

I used some 72 El Camino coils and made a 2" drop block. I did the trailing arm mount flip but I need to check the pinion angle now that I have the bed back on. It's always good to compare notes!

05-04-2012, 07:56 PM	#151
RexDodge Registered User Join Date: Apr 2008 Location: Oregon City, Oregon Posts: 741	Re: How about some pics of Static Dropped C-10's Ripped some heated coils out and installed 2.5" spindles and 2" springs. Also did the lca mod to gain caster. Had to "massage" the upper spring pocket as the coil also moves forward when the lca moves . After that a little work all fits great. This is with 15x8 torque thrust II and 235/60x15. The tire/wheel combo will do for now but I see changes in the future. Once I get the bed back on I'll post up more. A couple of pics... Attached Images

05-05-2012, 10:58 PM	#152
RINC Registered User Join Date: Apr 2012 Location: A Sunny Place For Shady People Posts: 468	Re: How about some pics of Static Dropped C-10's Hi an Low Both trucks are a night an day differance in the driving. I think I like the ride of me Dads lowered one. __________________ Chris '69 C-20 '04 Jeep TJ

05-07-2012, 03:09 PM	#153
outlawz916 Registered User Join Date: Feb 2012 Location: Elk Grove Posts: 26	Re: How about some pics of Static Dropped C-10's I wanna say this is about a 5.5/8 but i havent accurately measured it.

05-08-2012, 08:06 PM	#155
shawno72 C/10 junkie Join Date: Nov 2010 Location: Stockton Ca Posts: 9,093	Re: How about some pics of Static Dropped C-10's x2 __________________ Shawn 70 LWB C10 current driver/project http://67-72chevytrucks.com/vboard/s...d.php?t=663051 68 SWB C10 Work in progress.....SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=559520 72 LWB C10 Sold 71 LWB C10 Sold 68 LWB C10 CST Sold http://youtu.be/kbB0QrBIs9k My mom always had the best advice. It was just a tad late. After a fall that involved blood, she'd say....."Careful!"

05-09-2012, 10:09 AM	#156
DCoffey1972 Registered User Join Date: Dec 2008 Location: middle tn Posts: 39	Re: How about some pics of Static Dropped C-10's here is mine 4.5/6

05-19-2012, 07:36 PM	#158
bcutt Registered User Join Date: Aug 2008 Location: North GA Posts: 400	Re: How about some pics of Static Dropped C-10's Saw this truck at the GoodGuys in Nashville today. Very nice truck! __________________ "Some of my finest hours have been spent on my back veranda, smoking hemp and observing as far as my eye can see." - Thomas Jefferson 72 C10 SWB "Work in Progress"

05-20-2012, 10:07 PM	#160
DCoffey1972 Registered User Join Date: Dec 2008 Location: middle tn Posts: 39	Re: How about some pics of Static Dropped C-10's Thanks for the comments guys, when i started on it 3 years ago just wanted a clean looking truck to drive around and enjoy. Still alot left to do under hood & put the a/c back on it

05-26-2012, 09:02 PM	#161
northeimcustom Registered User Join Date: Feb 2007 Location: WISCONSIN Posts: 291	Re: How about some pics of Static Dropped C-10's

05-30-2012, 09:08 PM	#162
RexDodge Registered User Join Date: Apr 2008 Location: Oregon City, Oregon Posts: 741	Re: How about some pics of Static Dropped C-10's Finally got the stuff done under the bed and got it back on. It's just setting loose but it sure is nice to have it back on! Attached Images

06-05-2012, 11:15 PM	#163
elf w/capital T Registered User Join Date: Feb 2011 Location: North Carolina Posts: 994	Re: How about some pics of Static Dropped C-10's when i had it up and running... a few months ago...

06-07-2012, 01:49 AM	#164
BlueEK9 Registered User Join Date: Mar 2011 Location: Tacoma Posts: 134	Re: How about some pics of Static Dropped C-10's 5.5" drop up front and 5" in the rear I'll be throwing these rims on it and dropping rear another 2" before summer is over. Posted via Mobile Device __________________ If you are on Facebook check out our group. northwestc10s@groups.facebook.com Chris Fowler

06-14-2012, 11:11 PM	#165
ramega Registered User Join Date: May 2012 Location: elk grove ca. Posts: 82	Re: How about some pics of Static Dropped C-10's [/IMG]heres my 68 i got from c10 king Last edited by ramega; 06-14-2012 at 11:27 PM. Reason: cant loadpic

06-15-2012, 10:23 AM	#166
ramega Registered User Join Date: May 2012 Location: elk grove ca. Posts: 82	Re: How about some pics of Static Dropped C-10's

06-15-2012, 10:26 AM	#168
ramega Registered User Join Date: May 2012 Location: elk grove ca. Posts: 82	Re: How about some pics of Static Dropped C-10's

06-15-2012, 10:29 AM	#169
ramega Registered User Join Date: May 2012 Location: elk grove ca. Posts: 82	Re: How about some pics of Static Dropped C-10's



Register or Log In To remove these advertisements.

06-27-2012, 02:15 AM	#172
63c10longbed Registered User Join Date: Jul 2010 Location: Cle Elum, WA Posts: 3	Re: How about some pics of Static Dropped C-10's My 64 longbed with 4.5" front 6" rear. CPP grand slam 2.5" spindles and 2" coils in front, 4" HD coils in rear with 2" blocks. 20x8.5 American Racing Marins. Currently undergoing transformation into a Blazer type roadster. Attached Images __________________ Sean 1987 K30 Silverado 454/TH400/205/4.11's/4" lift/35s 1963/64 C10 Roadster 350 +.060/T5/3.73's/4.5/6 drop 78 CJ5 on Mod'd YJ frame 355/TH350/D300/3.73's/36s Tube Chassis 4x4 Racer 355/TH350/D300/4.56's 01 Silverado 1500 SCSWB 4.3/4L60E/3.42's/4/6" drop on 20's (FOR SALE)

Register or Log In To remove these advertisements.