67CST rebuild down under - Page 7 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

aussie67c10 · 08-17-2012, 10:54 PM

Quote:

Originally Posted by Thumpt

Greta work, loving your build.

Thanks mate

aussie67c10 · 08-18-2012, 06:32 AM

I spent today cleaning all the nuts and bolts for the front end .i also put some new rubber in to the vent doors. My first passenger is lining up for her first ride,she wont have to wait to much longer

aussie67c10 · 08-19-2012, 09:55 AM

Did not do a lot today ,just cleaned and painted nuts,bolts and few parts

aussie67c10 · 08-19-2012, 10:28 AM

Quote:

Originally Posted by MJs69CST

Looking good!

Thanks bud

aussie67c10 · 08-21-2012, 04:30 AM

Here is another shot of the diff and i started putting the front end back together

aussie67c10 · 08-22-2012, 05:39 AM

I finished off the front end today and fitted the bb motor stands

aussie67c10 · 08-23-2012, 05:46 AM

I finished off the front end today . installed the factory front sway bar and the fuel tank . i also painted a few more small parts

aussie67c10 · 08-25-2012, 11:15 AM

I cut the hole for the centre ac outlet today . fitted up the vent doors and started to sort out the wiring harness . i just have to extend a few of the wires so it all fits for rhd. the painters lost my ash tray so i had to get another one , just have to paint it

aussie67c10 · 08-26-2012, 05:36 AM

I finished off the harness and hung a door and guard and radiator support

aussie67c10 · 08-26-2012, 05:39 AM

one more shot of the front

FRENCHBLUE72 · 08-26-2012, 10:26 AM

Looks good... That booster being on the passengerside always throws me off...

aussie67c10 · 08-26-2012, 10:56 AM

Quote:

Originally Posted by FRENCHBLUE72

Looks good... That booster being on the passengerside always throws me off...

Thanks. i would prefer LHD but if i left it left hook our road rules don't allow any modification and this truck is going to be a daily driver

Tinkermc · 08-26-2012, 02:03 PM

I have not checked on this build in awhile and a lot of very good stuff has happened,

aussie67c10 · 08-26-2012, 06:02 PM

Quote:

Originally Posted by Tinkermc

I have not checked on this build in awhile and a lot of very good stuff has happened,

Thank you sir .i go back to work today so not much is going to happen for the next 4 weeks

aussie67c10 · 08-26-2012, 09:50 PM

Here is a shot of the other side

**67cheby** · 08-27-2012, 08:22 AM

Looking great !
Posted via Mobile Device

aussie67c10 · 08-27-2012, 08:31 AM

Quote:

Originally Posted by 67cheby

Looking great !
Posted via Mobile Device

Thanks bud . it always starts to look a little more like something once you hang some panels

aussie67c10 · 09-27-2012, 05:02 AM

I got the box back from the painters today. i sealed the underside and bolted and sealed one tubb

CNC-C10 · 09-27-2012, 08:21 AM

Quote:

I got the box back from the painters today

Yea you did..that looks great!

Gary

aussie67c10 · 09-27-2012, 09:48 AM

Quote:

Originally Posted by CNC-C10

Yea you did..that looks great!

Gary

thanks gary

aussie67c10 · 09-28-2012, 02:57 AM

I put the body on today ,just need to do the final alignment and bolt it down.

aussie67c10 · 09-28-2012, 11:40 PM

Here is one more pic

aussie67c10 · 09-29-2012, 01:32 AM

one of the plates

67chevy1series · 09-29-2012, 10:02 PM

truck looks amazing mate! keep it up!

aussie67c10 · 09-29-2012, 11:11 PM

Quote:

Originally Posted by 67chevy1series

truck looks amazing mate! keep it up!

Thanks bud its starting to come together. a lot of hard work. still lots to go

08-18-2012, 06:32 AM	#152
aussie67c10 Registered User Join Date: Dec 2011 Location: Adelaide South australia Posts: 249	Re: 67CST rebuild down under I spent today cleaning all the nuts and bolts for the front end .i also put some new rubber in to the vent doors. My first passenger is lining up for her first ride,she wont have to wait to much longer Attached Images __________________ BOWTIE OR NO-TIE

08-19-2012, 09:55 AM	#153
aussie67c10 Registered User Join Date: Dec 2011 Location: Adelaide South australia Posts: 249	Re: 67CST rebuild down under Did not do a lot today ,just cleaned and painted nuts,bolts and few parts Attached Images __________________ BOWTIE OR NO-TIE

08-21-2012, 04:30 AM	#155
aussie67c10 Registered User Join Date: Dec 2011 Location: Adelaide South australia Posts: 249	Re: 67CST rebuild down under Here is another shot of the diff and i started putting the front end back together Attached Images __________________ BOWTIE OR NO-TIE

08-22-2012, 05:39 AM	#156
aussie67c10 Registered User Join Date: Dec 2011 Location: Adelaide South australia Posts: 249	Re: 67CST rebuild down under I finished off the front end today and fitted the bb motor stands Attached Images __________________ BOWTIE OR NO-TIE

08-23-2012, 05:46 AM	#157
aussie67c10 Registered User Join Date: Dec 2011 Location: Adelaide South australia Posts: 249	Re: 67CST rebuild down under I finished off the front end today . installed the factory front sway bar and the fuel tank . i also painted a few more small parts Attached Images __________________ BOWTIE OR NO-TIE

08-25-2012, 11:15 AM	#158
aussie67c10 Registered User Join Date: Dec 2011 Location: Adelaide South australia Posts: 249	Re: 67CST rebuild down under I cut the hole for the centre ac outlet today . fitted up the vent doors and started to sort out the wiring harness . i just have to extend a few of the wires so it all fits for rhd. the painters lost my ash tray so i had to get another one , just have to paint it Attached Images __________________ BOWTIE OR NO-TIE

08-26-2012, 05:36 AM	#159
aussie67c10 Registered User Join Date: Dec 2011 Location: Adelaide South australia Posts: 249	Re: 67CST rebuild down under I finished off the harness and hung a door and guard and radiator support Attached Images __________________ BOWTIE OR NO-TIE

08-26-2012, 05:39 AM	#160
aussie67c10 Registered User Join Date: Dec 2011 Location: Adelaide South australia Posts: 249	Re: 67CST rebuild down under one more shot of the front Attached Images __________________ BOWTIE OR NO-TIE

08-26-2012, 10:26 AM	#161
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,606	Re: 67CST rebuild down under Looks good... That booster being on the passengerside always throws me off... __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

08-26-2012, 02:03 PM	#163
Tinkermc Registered User Join Date: Jul 2011 Location: Farmville, Va Posts: 3,026	Re: 67CST rebuild down under I have not checked on this build in awhile and a lot of very good stuff has happened,

08-26-2012, 09:50 PM	#165
aussie67c10 Registered User Join Date: Dec 2011 Location: Adelaide South australia Posts: 249	Re: 67CST rebuild down under Here is a shot of the other side Attached Images __________________ BOWTIE OR NO-TIE

08-27-2012, 08:22 AM	#166
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: 67CST rebuild down under Looking great ! Posted via Mobile Device __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

09-27-2012, 05:02 AM	#168
aussie67c10 Registered User Join Date: Dec 2011 Location: Adelaide South australia Posts: 249	Re: 67CST rebuild down under I got the box back from the painters today. i sealed the underside and bolted and sealed one tubb Attached Images __________________ BOWTIE OR NO-TIE

09-28-2012, 02:57 AM	#171
aussie67c10 Registered User Join Date: Dec 2011 Location: Adelaide South australia Posts: 249	Re: 67CST rebuild down under I put the body on today ,just need to do the final alignment and bolt it down. Attached Images __________________ BOWTIE OR NO-TIE

09-28-2012, 11:40 PM	#172
aussie67c10 Registered User Join Date: Dec 2011 Location: Adelaide South australia Posts: 249	Re: 67CST rebuild down under Here is one more pic Attached Images __________________ BOWTIE OR NO-TIE



Register or Log In To remove these advertisements.

09-29-2012, 01:32 AM	#173
aussie67c10 Registered User Join Date: Dec 2011 Location: Adelaide South australia Posts: 249	Re: 67CST rebuild down under one of the plates Attached Images __________________ BOWTIE OR NO-TIE

09-29-2012, 10:02 PM	#174
67chevy1series Registered User Join Date: Mar 2010 Location: a t w a t e r cali 95301 Posts: 10,713	Re: 67CST rebuild down under truck looks amazing mate! keep it up!

Register or Log In To remove these advertisements.