OK ALL MUST GO - Bodies, Sheetmetal, Hard Top & More - Page 7 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

MoreLoveThanMoney · 02-05-2013, 12:17 PM

Quote:

Originally Posted by 70chevyolbetty

if u cut up any of the blazers i need the windshield frame.? pm me and send pics will pay shipping costs as well. thanks

The only frame I have that I would cut up is RUSTED!!! Its beyond repair. Sorry I cant help but thanks for checking.

unclegrape · 02-05-2013, 05:31 PM

Are the non-AC dashes still available? Any pictures? What would shipping be to 82001?

4oldcars · 02-09-2013, 10:58 AM

If you cut up any bodies, I'd be interested in a couple patch panels for the blazer rear bed/floor. Maybe 10-12" square shipped to 20736. PM price if available. Thanx.

MDc10 · 02-11-2013, 12:24 PM

Does it have pull straps on the doors? If so will work on squares. I'm looking for the mounting hardware and strap covers
Posted via Mobile Device

MoreLoveThanMoney · 02-11-2013, 01:50 PM

Quote:

Originally Posted by unclegrape

Are the non-AC dashes still available? Any pictures? What would shipping be to 82001?

I do still have the non-ac dashes. I dont have any pics but can get some and email them to you. Last time i figured shipping on one, just because of the length, shipping was around $60

Quote:

Originally Posted by 4oldcars

If you cut up any bodies, I'd be interested in a couple patch panels for the blazer rear bed/floor. Maybe 10-12" square shipped to 20736. PM price if available. Thanx.

Ive got one under the knife now. Not a whole lot of good stuff but I may be able to get some bed floor patch panels. Just need to know how many highs and lows you need along with a length.

Quote:

Originally Posted by MDc10

Does it have pull straps on the doors? If so will work on squares. I'm looking for the mounting hardware and strap covers
Posted via Mobile Device

Im thinking you are referring to the Burban doors. I sold the Burban.

buddylee · 02-23-2013, 01:43 PM

Battery tray still available? Pictures
Thank u
Posted via Mobile Device

the_69_C10 · 02-23-2013, 03:15 PM

Do you have the chrome trim peace that goes over the door panel?

tdkosta · 02-23-2013, 05:42 PM

Do you still have the driver's side fenders? I need one for an ochre '71 blazer to 85208. Thanks, Tony

68panelman · 02-25-2013, 06:48 PM

Any rear rubber floor mat for a blazer?

1972K20 · 02-25-2013, 07:49 PM

Do you have a good tailgate?
Posted via Mobile Device

ozziemex · 03-13-2013, 06:59 AM

Do you have any fuel tanks left for the burb or blazers?

MoreLoveThanMoney · 03-16-2013, 01:03 AM

I don't have any fuel tanks left but thanks for asking
Posted via Mobile Device

Zoomin · 03-16-2013, 09:59 PM

Have any vent windows with good chrome on them? The rubber doesn't have to be great but the chrome does. Thanks!

MoreLoveThanMoney · 03-18-2013, 09:36 PM

Quote:

Originally Posted by Zoomin

Have any vent windows with good chrome on them? The rubber doesn't have to be great but the chrome does. Thanks!

I have several sets but not sure of any with perfect chrome. You are welcome to come look. I've got something else I need to sell you too that you need look at!
Posted via Mobile Device

Zoomin · 03-18-2013, 10:03 PM

Quote:

Originally Posted by MoreLoveThanMoney

I have several sets but not sure of any with perfect chrome. You are welcome to come look. I've got something else I need to sell you too that you need look at!

When's a good time to come buy, er by?

MoreLoveThanMoney · 03-18-2013, 10:12 PM

Quote:

Originally Posted by Zoomin

When's a good time to come buy, er by?

PM me your number and I'll call you to set up
Posted via Mobile Device

tdkosta · 03-18-2013, 10:39 PM

Any driver's side fenders?

Zoomin · 03-18-2013, 10:54 PM

PM sent

MoreLoveThanMoney · 03-19-2013, 11:57 AM

Quote:

Originally Posted by tdkosta

Any driver's side fenders?

I do have a fender but unless you just want original I have found it to be really expensive to ship. I'd be glad to help if you're interested.
Posted via Mobile Device

tdkosta · 03-19-2013, 12:31 PM

Quote:

Originally Posted by MoreLoveThanMoney

I do have a fender but unless you just want original I have found it to be really expensive to ship. I'd be glad to help if you're interested.
Posted via Mobile Device

Thanks, I do want original, but can't let it get too expensive. I'll have to see what becomes available locally. Out of curiousity how expensive has it been to package and ship a fender?

Leroy-B1 · 04-25-2013, 12:00 AM

All the doors gone?
Posted via Mobile Device

woodymm3 · 05-02-2013, 12:58 PM

Yes please send me some pictures of the doors if you dont mind.

MoreLoveThanMoney · 05-12-2013, 10:05 AM

I do have some descent doors but they have to ship on a pallet and the freight is expensive. It would end up making a pair of doors around 600-700. Sheet metal is expensive to ship and I haven't had good luck with shipping sheet metal.
Posted via Mobile Device

houses28 · 05-13-2013, 02:04 PM

looking for a good tub for my 72 2wd blazer. are need a donor for parts.

MoreLoveThanMoney · 05-16-2013, 06:20 PM

Quote:

Originally Posted by houses28

looking for a good tub for my 72 2wd blazer. are need a donor for parts.

I have got a tub that I need to go away. Needs minimal work. It's on a converted 2wd frame. I can get you some pics but they don't do the tub justice. Solid tubs are hard to find and this was the most solid I could ever find. Not sure what parts you are needing from a donor but I can probably help with that too
Posted via Mobile Device

02-05-2013, 05:31 PM	#152
unclegrape Registered User Join Date: Jun 2011 Location: Cheyenne, WY Posts: 10	Re: ALL MUST GO - Bodies, Sheetmetal, Hard Top & More Are the non-AC dashes still available? Any pictures? What would shipping be to 82001?

02-09-2013, 10:58 AM	#153
4oldcars Registered User Join Date: Jun 2004 Location: On The Beach, S C Posts: 613	Re: ALL MUST GO - Bodies, Sheetmetal, Hard Top & More If you cut up any bodies, I'd be interested in a couple patch panels for the blazer rear bed/floor. Maybe 10-12" square shipped to 20736. PM price if available. Thanx. __________________ 4oldcars Driving: 1971 Jimmy w/68 Chev front clip, 1953 Bel Air 2 dr hdtp, 1996 Roadmaster wagon, 2000 Eldorado The ones I let go: 1931 2 dr sedan, 1935 pick up, 1938 2 dr sedan, 1962 SS 454, 1963 409 wagon, 1970 short bed, 1972 short bed, 1972 sub, 1976 short bed, 1986 long bed, 03 short bed

02-11-2013, 12:24 PM	#154
MDc10 Registered User Join Date: Sep 2012 Location: Broken Arrow, ok Posts: 181	Re: ALL MUST GO - Bodies, Sheetmetal, Hard Top & More Does it have pull straps on the doors? If so will work on squares. I'm looking for the mounting hardware and strap covers Posted via Mobile Device

02-23-2013, 01:43 PM	#156
buddylee Registered User Join Date: Jan 2010 Location: Coventry,RI Posts: 114	Re: ALL MUST GO - Bodies, Sheetmetal, Hard Top & More Battery tray still available? Pictures Thank u Posted via Mobile Device

02-23-2013, 03:15 PM	#157
the_69_C10 Registered User Join Date: Dec 2012 Location: Tifton, Georgia Posts: 115	Re: ALL MUST GO - Bodies, Sheetmetal, Hard Top & More Do you have the chrome trim peace that goes over the door panel? __________________ 1969 C-10 SWB Project 2002 Chevy Silverado Ext Cab LS Build Thread--> "Start of Something New" http://67-72chevytrucks.com/vboard/s...d.php?t=557900

02-23-2013, 05:42 PM	#158
tdkosta Registered User Join Date: Jan 2007 Location: Mesa, AZ Posts: 781	Re: ALL MUST GO - Bodies, Sheetmetal, Hard Top & More Do you still have the driver's side fenders? I need one for an ochre '71 blazer to 85208. Thanks, Tony

02-25-2013, 06:48 PM	#159
68panelman Registered User Join Date: Jan 2011 Location: Delaware and Long Island, New York Posts: 3,464	Re: ALL MUST GO - Bodies, Sheetmetal, Hard Top & More Any rear rubber floor mat for a blazer?

02-25-2013, 07:49 PM	#160
1972K20 Registered User Join Date: Nov 2010 Location: Alabama Posts: 743	Re: ALL MUST GO - Bodies, Sheetmetal, Hard Top & More Do you have a good tailgate? Posted via Mobile Device

03-13-2013, 06:59 AM	#161
ozziemex Registered User Join Date: Mar 2009 Location: okc Posts: 25	Re: ALL MUST GO - Bodies, Sheetmetal, Hard Top & More Do you have any fuel tanks left for the burb or blazers?

03-16-2013, 01:03 AM	#162
MoreLoveThanMoney Registered User Join Date: Nov 2010 Location: Oklahoma City, Ok Posts: 438	Re: ALL MUST GO - Bodies, Sheetmetal, Hard Top & More I don't have any fuel tanks left but thanks for asking Posted via Mobile Device

03-16-2013, 09:59 PM	#163
Zoomin Man of Mini-Talents Join Date: Sep 2009 Location: Oklahoma City, OK Posts: 4,295	Re: ALL MUST GO - Bodies, Sheetmetal, Hard Top & More Have any vent windows with good chrome on them? The rubber doesn't have to be great but the chrome does. Thanks! __________________ Steve Project - Ruth 66 Skylark Project - Lola 60 Biscayne Project - Iron Ox 54 GMC 100 Project - Darth 69 Camaro

03-18-2013, 10:39 PM	#167
tdkosta Registered User Join Date: Jan 2007 Location: Mesa, AZ Posts: 781	Re: ALL MUST GO - Bodies, Sheetmetal, Hard Top & More Any driver's side fenders?

03-18-2013, 10:54 PM	#168
Zoomin Man of Mini-Talents Join Date: Sep 2009 Location: Oklahoma City, OK Posts: 4,295	Re: ALL MUST GO - Bodies, Sheetmetal, Hard Top & More PM sent __________________ Steve Project - Ruth 66 Skylark Project - Lola 60 Biscayne Project - Iron Ox 54 GMC 100 Project - Darth 69 Camaro

04-25-2013, 12:00 AM	#171
Leroy-B1 Registered User Join Date: Dec 2010 Location: Mars Hill, NC Posts: 1,995	Re: ALL MUST GO - Bodies, Sheetmetal, Hard Top & More All the doors gone? Posted via Mobile Device

05-02-2013, 12:58 PM	#172
woodymm3 Registered User Join Date: Mar 2008 Location: Oklahoma city Posts: 490	Re: ALL MUST GO - Bodies, Sheetmetal, Hard Top & More Yes please send me some pictures of the doors if you dont mind.



Register or Log In To remove these advertisements.

05-12-2013, 10:05 AM	#173
MoreLoveThanMoney Registered User Join Date: Nov 2010 Location: Oklahoma City, Ok Posts: 438	Re: ALL MUST GO - Bodies, Sheetmetal, Hard Top & More I do have some descent doors but they have to ship on a pallet and the freight is expensive. It would end up making a pair of doors around 600-700. Sheet metal is expensive to ship and I haven't had good luck with shipping sheet metal. Posted via Mobile Device

05-13-2013, 02:04 PM	#174
houses28 Registered User Join Date: Sep 2011 Location: Dallas, Texas Posts: 34	Re: ALL MUST GO - Bodies, Sheetmetal, Hard Top & More looking for a good tub for my 72 2wd blazer. are need a donor for parts.

Register or Log In To remove these advertisements.