67c10 build

[fastcam1]

Originally Posted by 67ctener

In cab, wanna keep the body close to original as I can
Posted via Mobile Device

You could always do it like N2billet does on his original paint trucks and just have a dummy fill neck on the cab so it looks original but there is actually no tank in the cab
Posted via Mobile Device

[67ctener]

Originally Posted by Xeen

Holy smokes you are spending some serious money on your bed, were the old bedsides beyond resonable repair?

They were both pretty rough. Got decent money for what they were. I actually only have 1300 into a complete bed minus gate and all the wood. The shop I deal with doesn't charge freight as long as you wait till they have a full order. Haven't heard anything bad on repop bedsides so I figured it was my best bet. Everything else is original gm sheetmetal and all repairable.
Posted via Mobile Device

[fastcam1]

Originally Posted by 67ctener

The shop I deal with doesn't charge freight as long as you wait till they have a full order.
Posted via Mobile Device

what is this shop you speak of?

[67ctener]

Dreamers rods and pickups in Everett. If freight is charged it's split between everyone that has an order
Posted via Mobile Device

[67ctener]

Looked at porterbuilt today... Almost fell over, I'd have to take out a second mortgage. This thing is stayin on springs.
Posted via Mobile Device

[67ctener]

Posted via Mobile Device
The 402 came out today, motor is on the next to do list

[67ctener]

It's got potential
Posted via Mobile Device

[fastcam1]

Originally Posted by 67ctener

Dreamers rods and pickups in Everett. If freight is charged it's split between everyone that has an order
Posted via Mobile Device

Ya I've been wanting to go check out dreamers just kinda far drive lol
Posted via Mobile Device

[Xeen]

Originally Posted by 67ctener

Looked at porterbuilt today... Almost fell over, I'd have to take out a second mortgage. This thing is stayin on springs.
Posted via Mobile Device

LOL! Yeah custom fabricated parts are expensive.
I wont buy that stuff, I would rather take the time to fabricate it myself.

[Bennett68C10]

Originally Posted by 67ctener

Got my tires... Got them from tirecrawler.com very happy with ther prices and service. Paid $702 shipped to my door in 2 days! My local les schwab wanted over 1k. Insane mark up on tires
Posted via Mobile Device

Those tires look familiar I have the same ones in my house right now. Everything is looking great and your right the Porterbuilt stuff is expensive but the quality is top notch.
Posted via Mobile Device

[67ctener]

Yeah It looks awesome, may be part 2 of the build one day...
Posted via Mobile Device

[gdavis]

nice shoes. They will last a long time and the parts look great. I wish I was as far along on my build as you. and I can remember when I started and said the same thing about other builds. My cab is almost finshed with the body work.

[67ctener]

Originally Posted by gdavis

nice shoes. They will last a long time and the parts look great. I wish I was as far along on my build as you. and I can remember when I started and said the same thing about other builds. My cab is almost finshed with the body work.

Thank you, my cab will be a big hurdle. It needs a lot of work.
Posted via Mobile Device

[jlsanborn]

I'm with you on the filler neck. I totally get the benifits of relocating the tank, but I just really like the stock look AND really don't like the look of all the different ways people install a rear filler. Don't want one on the bed floor or in the bed side.

What are your plans for the motor? Alreay have a trans or plans for that?

[67ctener]

Originally Posted by jlsanborn

I'm with you on the filler neck. I totally get the benifits of relocating the tank, but I just really like the stock look AND really don't like the look of all the different ways people install a rear filler. Don't want one on the bed floor or in the bed side.

What are your plans for the motor? Alreay have a trans or plans for that?

I'm gonna run an in cab tank, don't mind it at all. I'm really having a hard time doing anything real crazy to this truck. I wanna be driving this when I'm 90 and it still be cool. Just don't wanna build something that's cool in the moment. Original is always cool and will bring in the money if I ever part with it. I'm gonna just do a mild rebuild on the 402, nothing crazy, again maybe sticking along stock lines but of course a set of headers. I have the turbo 400 I took out of the parts truck I will rebuild and run that
Posted via Mobile Device

[67ctener]

Posted via Mobile Device
Finally some updates, cut my 67 frame to match the 71 parts truck frame for header clearance. Unfortunately I never thought of this before powdercoat. A little tape and a jigsaw and it cut it no problem, file and some touch up and can't even tell.
Posted via Mobile Device

[67ctener]

Posted via Mobile Device
Scored on a real nice tach dash, typical faded temp gauge but just bought a NOS one on eBay.
Posted via Mobile Device

[67ctener]

Posted via Mobile Device
and finally... The wheels. Hats off to billet specialties on the amazing quality and polish on these wheels. The back of the wheel has nearly the same polish as the front.

20x9.5 5" bs out back
20x8 4.25 bs in the front

290/40/20 toyo proxes stii rear
255/40/20 front
Posted via Mobile Device

[67ctener]

Posted via Mobile Device

Feels like a huge accomplishment that it finally rolls. No more jack stands! Rolled it out of the garage so I could clean yesterday sure was nice
Posted via Mobile Device

[Bennett68C10]

Wheels look great
Posted via Mobile Device

[67ctener]

Originally Posted by Bennett--G4L

Wheels look great
Posted via Mobile Device

Thanks, exactly what I was looking for! Should fit the look I'm going for spot on I hope
Posted via Mobile Device

[fastcam1]

Dude!!!! Looks awesome. If you don't mind me asking what did the wheels set you back?
Posted via Mobile Device

[67ctener]

Wheels, freight, tax, mount and balance was 2500
Posted via Mobile Device

[fastcam1]

Originally Posted by 67ctener

Wheels, freight, tax, mount and balance was 2500
Posted via Mobile Device

Nice that's not bad
Posted via Mobile Device

[jlsanborn]

Looks bad ass! Getting my wheels and tires bolted on was a big deal too. Really lit a fire under my azz. Nice score on the tach cluster!!