IT's TIME! Agent Orange under the knife... Merry Xmas - Page 7 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

ls1c10 · 12-19-2013, 01:37 AM

Quote:

Originally Posted by effects66

Sorry it's been a bit, but family, then holidays, bla bla bla. LOL

She's finally a driver. Still some things that need to be worked out: a small hesitation at low rpms, correct the transmission (shifting to early, not holding on long enough, not down shifting properly) but all of this is correctable with some programming.

Took it to a friends dyno and showed 435 at the rear wheels. So with 18% drive train correction engine is right around 540-550hp. Pretty close to what I was looking for. Have to say, this engine likes to rev. Have the limiter set at 6800. Once you get at 3k this engine just takes off. Still needs to get tuned. There are some ruff patches which I think it will work itself out once I drive it more. It only has 145 miles since finished. LOL Needs to be driven a lot for the computer to learn better.

Anyways, finally, here is a few quick pictures of the rims on.

The truck looks good. whats the offset on those wheels?

msgdsrf · 12-19-2013, 10:47 AM

Good to see you back. What's the diameter on those?

Bennett68C10 · 12-19-2013, 12:52 PM

Really nice looking truck, love the wheels.

effects66 · 12-19-2013, 02:41 PM

Quote:

Originally Posted by msgdsrf

Good to see you back. What's the diameter on those?

they are 20" all around

Quote:

Originally Posted by ls1c10

The truck looks good. whats the offset on those wheels?

5.25" bs front and back

Quote:

Originally Posted by Bennett68C10

Really nice looking truck, love the wheels.

Thanks!!

nibs · 12-19-2013, 07:56 PM

You never told me who made them

effects66 · 12-19-2013, 10:54 PM

Quote:

Originally Posted by nibs

You never told me who made them

Sorry about that, Circle Racing out of Sacramento.

Here is there website:
http://www.circleracing.com/

ls1c10 · 12-20-2013, 01:41 AM

Where are you going to tune your truck?
im looking for a place to take mine to, I was thinking of taking it to rick at synergy.

effects66 · 12-20-2013, 01:51 AM

Quote:

Originally Posted by ls1c10

Where are you going to tune your truck?
im looking for a place to take mine to, I was thinking of taking it to rick at synergy.

Actually my truck is at Comersomes Toy Shop in Campbell. He did a lot of the fab work and install. For the tuning, we will be taking it to TPS for now.

RCbowtie69 · 12-27-2013, 11:18 AM

Sweet!!!!!!!!!!!

effects66 · 06-17-2014, 02:24 AM

So it's been a bit but thought I would post a couple of pix up. Just redid the exhaust, 3" x pipe with borla XS mufflers. Still need to do the side exit cut outs. Also a couple of pix from the shops car show

SierraMtns · 06-22-2014, 12:54 AM

Thanks for sharing your build. I'm not to far from you. I might need to take a drive in the 67 and come check out the truck in person.

Thanks

**Sac** · 06-22-2014, 10:09 AM

Nice build. The coversion you did with the motor looks great.

effects66 · 06-25-2014, 03:40 PM

Quote:

Originally Posted by SierraMtns

Thanks for sharing your build. I'm not to far from you. I might need to take a drive in the 67 and come check out the truck in person.

Thanks

Yah. Come and see the truck in person anytime. It's usually parked at the shop

Quote:

Originally Posted by Sac

Nice build. The coversion you did with the motor looks great.

I appreciate the comment. Thanks

12-19-2013, 10:47 AM	#152
msgdsrf Registered User Join Date: Jul 2012 Location: White Salmon, WA Posts: 263	Re: IT's TIME! Agent Orange under the knife... Merry Xmas Good to see you back. What's the diameter on those?

12-19-2013, 12:52 PM	#153
Bennett68C10 Registered User Join Date: Dec 2006 Location: Toms River, NJ Posts: 5,518	Re: IT's TIME! Agent Orange under the knife... Merry Xmas Really nice looking truck, love the wheels. __________________ Keith 66 Suburban Burb Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=751361 IG: bennett68c10

12-19-2013, 07:56 PM	#155
nibs JRods Garage Join Date: Dec 2009 Location: East Highland, CA Posts: 1,098	Re: IT's TIME! Agent Orange under the knife... Merry Xmas You never told me who made them __________________ Orange Julius-My dropmember'd, LS'd, SWB street machine...

12-20-2013, 01:41 AM	#157
ls1c10 Registered User Join Date: Feb 2012 Location: watsonville, ca Posts: 40	Re: IT's TIME! Agent Orange under the knife... Merry Xmas Where are you going to tune your truck? im looking for a place to take mine to, I was thinking of taking it to rick at synergy.

12-27-2013, 11:18 AM	#159
RCbowtie69 Registered User Join Date: Dec 2003 Location: Thomasville, NC Posts: 1,877	Re: IT's TIME! Agent Orange under the knife... Merry Xmas Sweet!!!!!!!!!!! __________________ My Truck: 2.5 drop front, 4 & 5/8 in rear, 350cubic in. been bored .60 over, 700r4 (soon), 3 speed (on tree for now).rims & tires size,15x8 ralleys 5 on 5,P275/60R15. Members I have met: Pickupman, 1972 Super Cheyenne, Stepside,Chis Mc Bride. tsnow67,joel.e,

06-17-2014, 02:24 AM	#160
effects66 Registered User Join Date: Dec 2008 Location: San Jose Posts: 206	Re: IT's TIME! Agent Orange under the knife... Merry Xmas So it's been a bit but thought I would post a couple of pix up. Just redid the exhaust, 3" x pipe with borla XS mufflers. Still need to do the side exit cut outs. Also a couple of pix from the shops car show __________________ My 1970 c10 (550hp LSX, 4l80e, full Ridetech) http://67-72chevytrucks.com/vboard/s...d.php?t=556610

06-22-2014, 12:54 AM	#161
SierraMtns Registered User Join Date: Jun 2014 Location: Shingle Springs, CA Posts: 869	Re: IT's TIME! Agent Orange under the knife... Merry Xmas Thanks for sharing your build. I'm not to far from you. I might need to take a drive in the 67 and come check out the truck in person. Thanks

06-22-2014, 10:09 AM	#162
Sac Senior Member Join Date: Nov 2013 Location: Franklinton, LA Posts: 256	Re: IT's TIME! Agent Orange under the knife... Merry Xmas Nice build. The coversion you did with the motor looks great.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.