How about some pics of '73-'87 Long Beds Part II - Page 7 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

mud.man.rj · 02-20-2015, 08:44 PM

Nice rims Zigy, what size are they and what tire size are you running. I noticed your dash has an insert that doesn't look stock, do you know where it is from, who makes it.

enaberif · 02-20-2015, 09:38 PM

Quote:

Originally Posted by Zigy

First pic

Nice to see a fellow Calgarian! Maybe I'll see you driving around.

trenda · 02-20-2015, 09:51 PM

New member. Bought this 82 2wd from a guy down the block a few months ago who was letting it go to seed. Plan on fixing it up, using it to haul motorcycles to rallies, and then give it to my grandson (who is three, so I will have lots of time to get her looking good). My mechanical aptitude is mostly limited to motorcycles, but these seem pretty simple to work on.

It has a 350 crate motor, Edelbrock 600 cfm 4 bbl, Headman headers, sm465 with bad synchros and a worn input shaft bearing, and Mickey Thompson 33X 12.5 15 tires (which will be replaced shortly with 235/75 R 15 Goodyear Wranglers.) There is a very mild lift kit installed which I will eventually remove.

My wife hates it, the neighbors laugh at it, and I love to drive it!

Zigy · 02-21-2015, 03:22 PM

Quote:

Originally Posted by mud.man.rj

Nice rims Zigy, what size are they and what tire size are you running. I noticed your dash has an insert that doesn't look stock, do you know where it is from, who makes it.

Thank you for your kind words

The rims are 18" moto metal wheels with 33" nokian tires.
The dash pad is new and I got the insert your asking about from LMC truck.
I hope that helps

Zigy · 02-21-2015, 03:26 PM

Quote:

Originally Posted by enaberif

Nice to see a fellow Calgarian! Maybe I'll see you driving around.

Sounds GREAT!
I look forward to it..
You need to post a pic of your ride so I can watch for it

mud.man.rj · 02-21-2015, 04:52 PM

Thanks for the info on the dash insert, nice clean insert, just like your truck.

enaberif · 02-21-2015, 09:22 PM

Quote:

Originally Posted by Zigy

Sounds GREAT!
I look forward to it..
You need to post a pic of your ride so I can watch for it

Well tell you what. When I get my power steering pump issues sorted out and I can drive it I'll post a pic.

**a Good Man** · 03-05-2015, 05:44 AM

My new baby

owner 84 · 03-10-2015, 09:29 PM

1983 GMC truck.

81GMCSierra1500 · 03-11-2015, 02:14 AM

Out for a photo shoot the other day around the Comox area. Fresh wash and tire-shine. I just put Edelbrock Elite Series Valve Covers and an Air Cleaner on it, as well as an EGR Delete. She's freshly out of the shop with new Control Arm Bushings and Brakes. Riding like she's new!

RedSierra · 03-12-2015, 10:05 PM

Here is mine. We have had it since it was new.

ChevyGuy344 · 03-23-2015, 06:10 PM

Hey yall im new to this forum so just thought I post a picture of my current project. 1977 Chevy K20 3/4 Ton Scottsdale, just bought it yesterday the story behind it was back in 2003 it was parked and abandoned and the guy who owns the area found it and needed to sell it. the things that are wrong are: Has no battery, needs body reconditioning, needs just a general all around tune up, fluid flushed and what not. Picked it up for 1k

Smitty's Silverado · 03-24-2015, 01:45 AM

Here are some up to date pic's of my 84', it's still a work in process!

ChevyGuy344 · 03-24-2015, 01:48 AM

Quote:

Originally Posted by Smitty's Silverado

Here are some up to date pic's of my 84', it's still a work in process!

Nice, not crazy about the rims but still. I like the interior.

C.W · 03-24-2015, 04:07 PM

Quote:

Originally Posted by ChevyGuy344

Hey yall im new to this forum so just thought I post a picture of my current project. 1977 Chevy K20 3/4 Ton Scottsdale, just bought it yesterday the story behind it was back in 2003 it was parked and abandoned and the guy who owns the area found it and needed to sell it. the things that are wrong are: Has no battery, needs body reconditioning, needs just a general all around tune up, fluid flushed and what not. Picked it up for 1k

Ok, strange question... How did you attach the new style center caps to an older truck with 9/16" wheel studs?
I have hunted for nuts for both 9/16 and 1/2" with the outer threaded part to use newer wheels and caps with no luck.

**truckfan** · 03-24-2015, 04:15 PM

Quote:

Originally Posted by C.W

Ok, strange question... How did you attach the new style center caps to an older truck with 9/16" wheel studs?
I have hunted for nuts for both 9/16 and 1/2" with the outer threaded part to use newer wheels and caps with no luck.

i have used 1/2 (for 2WD) lots. look at this link.

http://67-72chevytrucks.com/vboard/s...d.php?t=356429

wheel guys at swap meets always have them.

ChevyGuy344 · 03-24-2015, 04:19 PM

Quote:

Originally Posted by C.W

Ok, strange question... How did you attach the new style center caps to an older truck with 9/16" wheel studs?
I have hunted for nuts for both 9/16 and 1/2" with the outer threaded part to use newer wheels and caps with no luck.

I really don't know, i bought it like that. It is 4wd if i havent said that yet.

C.W · 03-24-2015, 04:23 PM

Quote:

Originally Posted by truckfan

i have used 1/2 (for 2WD) lots. look at this link.

http://67-72chevytrucks.com/vboard/s...d.php?t=356429

wheel guys at swap meets always have them.

Cool, thanks. I never even thought to check ebay for lugnuts.... But I look for everything else on ebay...

**a Good Man** · 03-25-2015, 05:45 AM

HI

ChevyGuy344 · 03-25-2015, 04:08 PM

Quote:

Originally Posted by a Good Man

HI

Nice!

mud.man.rj · 03-25-2015, 11:41 PM

Kind of artistic those pic's, nice trucks, super clean.

GMC Redneck · 03-26-2015, 10:03 AM

New to the forum, but this is my baby. I got a new job and am making some good money so it's finally time to start updating her. Bringing it to the shop to get painted today, I'm going to keep it stock colors everything that's yellow will stay yellow and everything white will stay white, and so on.

mud.man.rj · 03-26-2015, 11:23 PM

Quote:

Originally Posted by GMC Redneck

New to the forum, but this is my baby. I got a new job and am making some good money so it's finally time to start updating her. Bringing it to the shop to get painted today, I'm going to keep it stock colors everything that's yellow will stay yellow and everything white will stay white, and so on.

Nice you can afford to get started on the truck, bet it is a bit exciting, should turn out nice as factory colors, keep us posted on it. It is a 4wd isn't it.

GMC Redneck · 03-27-2015, 09:11 AM

Quote:

Originally Posted by mud.man.rj

Nice you can afford to get started on the truck, bet it is a bit exciting, should turn out nice as factory colors, keep us posted on it. It is a 4wd isn't it.

Yea it's full time 4wd with a rear locker. Has the stock gmc locking differential in the middle also. As for engine and what not the body has 65,000 miles but it has a 383 in it, I don't k kw how many miles are on it.

I'm really excited, I'm pulling the carb today to make some adjustments to the throttle and what not. Last owner made some pretty ghetto fixes to simple solutions

jlelec · 03-27-2015, 12:57 PM

Quote:

Originally Posted by GMC Redneck

New to the forum, but this is my baby. I got a new job and am making some good money so it's finally time to start updating her. Bringing it to the shop to get painted today, I'm going to keep it stock colors everything that's yellow will stay yellow and everything white will stay white, and so on.

Really nice truck. One of my favorite old colors. Great that you are keeping it stock. Please post pictures as you go.

02-20-2015, 08:44 PM	#151
mud.man.rj Registered User Join Date: Dec 2011 Location: Creighton Sask. Canada Posts: 4,121	Re: How about some pics of '73-'87 Long Beds Part II Nice rims Zigy, what size are they and what tire size are you running. I noticed your dash has an insert that doesn't look stock, do you know where it is from, who makes it. __________________ 1987 Green n Green machine. 5.0 4spd std. 7" lift w 35's.

02-20-2015, 09:51 PM	#153
trenda Registered User Join Date: Feb 2015 Location: Baltimore MD Posts: 6	Re: How about some pics of '73-'87 Long Beds Part II New member. Bought this 82 2wd from a guy down the block a few months ago who was letting it go to seed. Plan on fixing it up, using it to haul motorcycles to rallies, and then give it to my grandson (who is three, so I will have lots of time to get her looking good). My mechanical aptitude is mostly limited to motorcycles, but these seem pretty simple to work on. It has a 350 crate motor, Edelbrock 600 cfm 4 bbl, Headman headers, sm465 with bad synchros and a worn input shaft bearing, and Mickey Thompson 33X 12.5 15 tires (which will be replaced shortly with 235/75 R 15 Goodyear Wranglers.) There is a very mild lift kit installed which I will eventually remove. My wife hates it, the neighbors laugh at it, and I love to drive it! Attached Images Last edited by trenda; 02-20-2015 at 09:58 PM.

02-21-2015, 04:52 PM	#156
mud.man.rj Registered User Join Date: Dec 2011 Location: Creighton Sask. Canada Posts: 4,121	Re: How about some pics of '73-'87 Long Beds Part II Thanks for the info on the dash insert, nice clean insert, just like your truck. __________________ 1987 Green n Green machine. 5.0 4spd std. 7" lift w 35's.

03-05-2015, 05:44 AM	#158
a Good Man Senior Member Join Date: Aug 2010 Location: FL Posts: 2,062	Re: How about some pics of '73-'87 Long Beds Part II My new baby Attached Images __________________ MY Facebook https://www.facebook.com/saad.alhajri.7106 ( saad_alhajri ) on Instagram

03-10-2015, 09:29 PM	#159
owner 84 Registered User Join Date: Jul 2011 Location: NY Posts: 263	Re: How about some pics of '73-'87 Long Beds Part II 1983 GMC truck. Attached Images __________________ email me @ nasser_060@hotmail.com and Check out my flicker @ http://www.flickr.com/photos/0060/

03-11-2015, 02:14 AM	#160
81GMCSierra1500 Registered User Join Date: Jan 2014 Location: Courtenay, British Columbia Posts: 107	Re: How about some pics of '73-'87 Long Beds Part II Out for a photo shoot the other day around the Comox area. Fresh wash and tire-shine. I just put Edelbrock Elite Series Valve Covers and an Air Cleaner on it, as well as an EGR Delete. She's freshly out of the shop with new Control Arm Bushings and Brakes. Riding like she's new! Attached Images __________________ 1981 Sierra Classic 1500, 305 4BBL, Ltd. Slip Rear End

03-12-2015, 10:05 PM	#161
RedSierra Registered User Join Date: Jul 2012 Location: Branson Mo Posts: 53	Re: How about some pics of '73-'87 Long Beds Part II Here is mine. We have had it since it was new. Attached Images

03-23-2015, 06:10 PM	#162
ChevyGuy344 Registered User Join Date: Mar 2015 Location: Marsfield MO Posts: 4	Re: How about some pics of '73-'87 Long Beds Part II Hey yall im new to this forum so just thought I post a picture of my current project. 1977 Chevy K20 3/4 Ton Scottsdale, just bought it yesterday the story behind it was back in 2003 it was parked and abandoned and the guy who owns the area found it and needed to sell it. the things that are wrong are: Has no battery, needs body reconditioning, needs just a general all around tune up, fluid flushed and what not. Picked it up for 1k Attached Images

03-24-2015, 01:45 AM	#163
Smitty's Silverado Registered User Join Date: Aug 2012 Location: Ballwin, Mo Posts: 3	Re: How about some pics of '73-'87 Long Beds Part II Here are some up to date pic's of my 84', it's still a work in process! Attached Images

03-25-2015, 05:45 AM	#169
a Good Man Senior Member Join Date: Aug 2010 Location: FL Posts: 2,062	Re: How about some pics of '73-'87 Long Beds Part II HI __________________ MY Facebook https://www.facebook.com/saad.alhajri.7106 ( saad_alhajri ) on Instagram

03-25-2015, 11:41 PM	#171
mud.man.rj Registered User Join Date: Dec 2011 Location: Creighton Sask. Canada Posts: 4,121	Re: How about some pics of '73-'87 Long Beds Part II Kind of artistic those pic's, nice trucks, super clean. __________________ 1987 Green n Green machine. 5.0 4spd std. 7" lift w 35's.

03-26-2015, 10:03 AM	#172
GMC Redneck Registered User Join Date: Mar 2015 Location: Billings, Montana Posts: 4	Re: How about some pics of '73-'87 Long Beds Part II New to the forum, but this is my baby. I got a new job and am making some good money so it's finally time to start updating her. Bringing it to the shop to get painted today, I'm going to keep it stock colors everything that's yellow will stay yellow and everything white will stay white, and so on. Attached Images



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.