66' c60 Parts for sale - Page 7 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

wahl4m · 05-08-2016, 11:49 AM

im looking for a fuel filter assembly -that is usually on the frame -at back of cab area-that uses a screw on cover assembly ! it was a "ac" brand ?? that had hard fuel lines to it ?? thanks mike

**richard2717** · 05-08-2016, 12:11 PM

Quote:

Originally Posted by wahl4m

im looking for a fuel filter assembly -that is usually on the frame -at back of cab area-that uses a screw on cover assembly ! it was a "ac" brand ?? that had hard fuel lines to it ?? thanks mike

Are you talking about this? I will need a zip to get shipping quote.

Richard

.

luvmytruck · 05-08-2016, 05:37 PM

Quote:

Originally Posted by richard2717

Glad to hear the glass made it ok. Thanks for letting me know

does your truck by chance have an aux. vacuum tank under the right running board?

**richard2717** · 05-08-2016, 08:09 PM

Quote:

Originally Posted by luvmytruck

does your truck by chance have an aux. vacuum tank under the right running board?

I will look tomorrow but I do not think so. I am pretty sure I should have split my head open on it if it were under the running boards and I dont remember any blood so far. lol

luvmytruck · 05-09-2016, 04:26 PM

I guess it is actually behind the running board on passenger side

**richard2717** · 05-09-2016, 04:31 PM

I forgot to take my camera today but the only thing underneath is the vac, booster with master cylinder under where the driver running board was. The only thing on the passenger side is the fuel filter that is pictured just above. You can just see the bottom of it in that picture

Richard

luvmytruck · 05-09-2016, 06:12 PM

Quote:

Originally Posted by richard2717

I forgot to take my camera today but the only thing underneath is the vac, booster with master cylinder under where the driver running board was. The only thing on the passenger side is the fuel filter that is pictured just above. You can just see the bottom of it in that picture

Richard

must not have one thanks again

**richard2717** · 05-15-2016, 02:36 PM

Pics of Fuel filter for walh4m

.

**richard2717** · 05-17-2016, 08:42 AM

Fuel filter sold. tracking info PMed

**l79m20** · 05-17-2016, 10:04 PM

Richard is the front section of the drive shaft available, should be around 56 inches long if so, cost and shipping to 66868

**richard2717** · 05-18-2016, 07:16 AM

Quote:

Originally Posted by l79m20

Richard is the front section of the drive shaft available, should be around 56 inches long if so, cost and shipping to 66868

I want to make sure this is correct before I go pulling it and getting costs. The 1st 2 sections come up to about 56" (depending on what you hook to) so there would be two hanger bearings still attached to the shaft. Let me know if the picture looks correct to you.

Richard

.

**l79m20** · 05-22-2016, 02:02 AM

Thanks Richard but my first section(of two)is 56" and not the same as your setup, will have to pass.

**richard2717** · 06-26-2016, 02:19 PM

TTT still have some parts left

4x4toy · 10-08-2016, 09:40 PM

Fenders still for sale? From looking at thread they did not sell. Someone mentioned they will not fit a 61 C60, I think that info is wrong. I am interested in fenders and running boards.

**richard2717** · 10-09-2016, 12:21 PM

Quote:

Originally Posted by 4x4toy

Fenders still for sale? From looking at thread they did not sell. Someone mentioned they will not fit a 61 C60, I think that info is wrong. I am interested in fenders and running boards.

I do still have all of that. As for what else they fit, you will have to determine that. I am not very familiar with this year truck. I am on the eastern shore of MD in Salisbury.

thanks
Richard

wahl4m · 10-09-2016, 06:09 PM

the early fenders stick out a differant amount than the 64-66 trucks

63 gmc · 11-15-2016, 11:23 PM

does that truck have drum brakes in the front ? I'm looking for wheel cylinders and springs

63 gmc · 11-16-2016, 11:45 PM

Still got the hood? Lmk

**richard2717** · 11-16-2016, 11:48 PM

Quote:

Originally Posted by 63 gmc

does that truck have drum brakes in the front ? I'm looking for wheel cylinders and springs

I would need to go take a look at it. It has been a while. I am pretty sure they are drum though. The hood is rotten , I do know that much. May take me a few days on the springs and all. Been real busy at work

Richard

63 gmc · 12-18-2016, 06:18 PM

Any luck with those front springs ?
Posted via Mobile Device

**richard2717** · 12-20-2016, 04:26 PM

Quote:

Originally Posted by 63 gmc

Any luck with those front springs ?
Posted via Mobile Device

Actually between the weather and my workload I just got back over to it today. Here are some pics of everything minus the wheel bearings and nut. I have to keep it rolling for now. The shoes actually look new. The only thing that looks rough out of all of it is the brake hoses. I cut the old ones so the end of them are still in the cylinders. I will need you to PM your address and let me know if you do or dont want the shoes so i can figure up weight and box size for the shipping costs

Richard

.

**richard2717** · 12-28-2016, 03:54 PM

The truck is now mostly gone. The scrap man is finishing cutting it up in the morning.
Only things I have still available are the fenders, running boards, passenger door and some other odds and ends listed in the ad already. Have not heard anything back from 63GMC yet on the brake parts so they are still available as well

Richard

63 gmc · 01-01-2017, 02:28 AM

Quote:

Originally Posted by richard2717

The truck is now mostly gone. The scrap man is finishing cutting it up in the morning.
Only things I have still available are the fenders, running boards, passenger door and some other odds and ends listed in the ad already. Have not heard anything back from 63GMC yet on the brake parts so they are still available as well
Hey Richard sorry I didn't get back to you sooner I checked out the pictures and actually as soon as I looked I realized it's not the same I'm not sure what brake set up I have but it's it's not the same mine only has two wheel cylinders two Springs to break pads nothing else. But thank you for pulling those parts out and I hope you have luck selling them.
Richard

Posted via Mobile Device

**richard2717** · 01-02-2017, 09:14 AM

Quote:

Originally Posted by 63 gmc

Posted via Mobile Device

No worries, that's why I included a picture of it still installed. It is hard to envision something while laying in parts on a table. If I understand you correctly yours has 2 wheel cylinders on each side. I would imagine there are several different brake combo's on the big trucks.

63 gmc · 01-02-2017, 09:37 AM

Quote:

Originally Posted by richard2717

No worries, that's why I included a picture of it still installed. It is hard to envision something while laying in parts on a table. If I understand you correctly yours has 2 wheel cylinders on each side. I would imagine there are several different brake combo's on the big trucks.

Yeah it's very odd everything I look at is lighter duty and yes it has two wheel cylinders on each front wheel, One for each pad never seen anything like it
Posted via Mobile Device

05-08-2016, 11:49 AM	#151
wahl4m Registered User Join Date: Jan 2002 Location: norwalk,iowa,usa Posts: 920	Re: 66' c60 Parts for sale im looking for a fuel filter assembly -that is usually on the frame -at back of cab area-that uses a screw on cover assembly ! it was a "ac" brand ?? that had hard fuel lines to it ?? thanks mike

05-09-2016, 04:26 PM	#155
luvmytruck Registered User Join Date: Jun 2012 Location: happy valley or. Posts: 106	Re: 66' c60 Parts for sale I guess it is actually behind the running board on passenger side

05-09-2016, 04:31 PM	#156
richard2717 Equal opportunity joke ofender Join Date: Oct 2011 Location: Eastern Shore of MD Posts: 10,135	Re: 66' c60 Parts for sale I forgot to take my camera today but the only thing underneath is the vac, booster with master cylinder under where the driver running board was. The only thing on the passenger side is the fuel filter that is pictured just above. You can just see the bottom of it in that picture Richard __________________ Members I have met. Dually Jams, OlBlue60, ScottH, Tommyboy24, Dujobo, Warbucket, 2003 Silverado, Notsolo, my90k5, 6t727t2, Special-K ,Jack_71C10, tabarcus,72blazer_mud_bogger,pwdcougar,RSavage,EricSean,1Rippen6,invicta455,tennaragtop71,arks, Kendal,Bennett68C10, Perpendicular, Chainsawman, McGeesCustomMinis,ShortbedClayton,longblue72,6768chevylover,Tim71,Travisarmenta,Ol' Drippy,fleetmitch,georgieb51,Dave,bcnya2,Dadsburb https://paypal.me/6772GMtruckparts Most women like the strong, silent type… Fortunately for me, my wife prefers the out-of-shape, mouthy type.

05-15-2016, 02:36 PM	#158
richard2717 Equal opportunity joke ofender Join Date: Oct 2011 Location: Eastern Shore of MD Posts: 10,135	Re: 66' c60 Parts for sale Pics of Fuel filter for walh4m . Attached Images __________________ Members I have met. Dually Jams, OlBlue60, ScottH, Tommyboy24, Dujobo, Warbucket, 2003 Silverado, Notsolo, my90k5, 6t727t2, Special-K ,Jack_71C10, tabarcus,72blazer_mud_bogger,pwdcougar,RSavage,EricSean,1Rippen6,invicta455,tennaragtop71,arks, Kendal,Bennett68C10, Perpendicular, Chainsawman, McGeesCustomMinis,ShortbedClayton,longblue72,6768chevylover,Tim71,Travisarmenta,Ol' Drippy,fleetmitch,georgieb51,Dave,bcnya2,Dadsburb https://paypal.me/6772GMtruckparts Most women like the strong, silent type… Fortunately for me, my wife prefers the out-of-shape, mouthy type.

05-17-2016, 08:42 AM	#159
richard2717 Equal opportunity joke ofender Join Date: Oct 2011 Location: Eastern Shore of MD Posts: 10,135	Re: 66' c60 Parts for sale Fuel filter sold. tracking info PMed __________________ Members I have met. Dually Jams, OlBlue60, ScottH, Tommyboy24, Dujobo, Warbucket, 2003 Silverado, Notsolo, my90k5, 6t727t2, Special-K ,Jack_71C10, tabarcus,72blazer_mud_bogger,pwdcougar,RSavage,EricSean,1Rippen6,invicta455,tennaragtop71,arks, Kendal,Bennett68C10, Perpendicular, Chainsawman, McGeesCustomMinis,ShortbedClayton,longblue72,6768chevylover,Tim71,Travisarmenta,Ol' Drippy,fleetmitch,georgieb51,Dave,bcnya2,Dadsburb https://paypal.me/6772GMtruckparts Most women like the strong, silent type… Fortunately for me, my wife prefers the out-of-shape, mouthy type.

05-17-2016, 10:04 PM	#160
l79m20 Registered User Join Date: May 2005 Location: Reading, Kansas Posts: 628	Re: 66' c60 Parts for sale Richard is the front section of the drive shaft available, should be around 56 inches long if so, cost and shipping to 66868

05-22-2016, 02:02 AM	#162
l79m20 Registered User Join Date: May 2005 Location: Reading, Kansas Posts: 628	Re: 66' c60 Parts for sale Thanks Richard but my first section(of two)is 56" and not the same as your setup, will have to pass.

06-26-2016, 02:19 PM	#163
richard2717 Equal opportunity joke ofender Join Date: Oct 2011 Location: Eastern Shore of MD Posts: 10,135	Re: 66' c60 Parts for sale TTT still have some parts left __________________ Members I have met. Dually Jams, OlBlue60, ScottH, Tommyboy24, Dujobo, Warbucket, 2003 Silverado, Notsolo, my90k5, 6t727t2, Special-K ,Jack_71C10, tabarcus,72blazer_mud_bogger,pwdcougar,RSavage,EricSean,1Rippen6,invicta455,tennaragtop71,arks, Kendal,Bennett68C10, Perpendicular, Chainsawman, McGeesCustomMinis,ShortbedClayton,longblue72,6768chevylover,Tim71,Travisarmenta,Ol' Drippy,fleetmitch,georgieb51,Dave,bcnya2,Dadsburb https://paypal.me/6772GMtruckparts Most women like the strong, silent type… Fortunately for me, my wife prefers the out-of-shape, mouthy type.

10-08-2016, 09:40 PM	#164
4x4toy Registered User Join Date: Jan 2009 Location: Southern Md Posts: 228	Re: 66' c60 Parts for sale Fenders still for sale? From looking at thread they did not sell. Someone mentioned they will not fit a 61 C60, I think that info is wrong. I am interested in fenders and running boards. __________________ 04 Yukon XL 2500 w/ Quadrasteer 61 Chevy C60, 261 inline six 86 Chevy C20 2wd, Banks 6.2 05 GMC Sierra 2500hd Duramax

10-09-2016, 06:09 PM	#166
wahl4m Registered User Join Date: Jan 2002 Location: norwalk,iowa,usa Posts: 920	Re: 66' c60 Parts for sale the early fenders stick out a differant amount than the 64-66 trucks

11-15-2016, 11:23 PM	#167
63 gmc Registered User Join Date: Nov 2016 Location: suffolk county ny Posts: 51	Re: 66' c60 Parts for sale does that truck have drum brakes in the front ? I'm looking for wheel cylinders and springs

11-16-2016, 11:45 PM	#168
63 gmc Registered User Join Date: Nov 2016 Location: suffolk county ny Posts: 51	Re: 66' c60 Parts for sale Still got the hood? Lmk

12-18-2016, 06:18 PM	#170
63 gmc Registered User Join Date: Nov 2016 Location: suffolk county ny Posts: 51	Re: 66' c60 Parts for sale Any luck with those front springs ? Posted via Mobile Device

12-28-2016, 03:54 PM	#172
richard2717 Equal opportunity joke ofender Join Date: Oct 2011 Location: Eastern Shore of MD Posts: 10,135	Re: 66' c60 Parts for sale The truck is now mostly gone. The scrap man is finishing cutting it up in the morning. Only things I have still available are the fenders, running boards, passenger door and some other odds and ends listed in the ad already. Have not heard anything back from 63GMC yet on the brake parts so they are still available as well Richard __________________ Members I have met. Dually Jams, OlBlue60, ScottH, Tommyboy24, Dujobo, Warbucket, 2003 Silverado, Notsolo, my90k5, 6t727t2, Special-K ,Jack_71C10, tabarcus,72blazer_mud_bogger,pwdcougar,RSavage,EricSean,1Rippen6,invicta455,tennaragtop71,arks, Kendal,Bennett68C10, Perpendicular, Chainsawman, McGeesCustomMinis,ShortbedClayton,longblue72,6768chevylover,Tim71,Travisarmenta,Ol' Drippy,fleetmitch,georgieb51,Dave,bcnya2,Dadsburb https://paypal.me/6772GMtruckparts Most women like the strong, silent type… Fortunately for me, my wife prefers the out-of-shape, mouthy type.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.