MD Parting 72 burb - Page 7 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

mrbudd55955 · 04-15-2018, 11:18 AM

I am just looking for some to get by for now. I have front metal and plastic ones so I would just end up painting them for now.

**richard2717** · 04-15-2018, 12:27 PM

Quote:

Originally Posted by mrbudd55955

I am just looking for some to get by for now. I have front metal and plastic ones so I would just end up painting them for now.

I have 3 singles left. Both 4th doors are in decent shape
The 3rd door one has several extra screw holes and it looks like something took a small chunk out of it but it is still very usable.

I can do $75 shipped on your choice of a pair. If you want them my PP is in my signature below.

Thanks
Richard

.

**richard2717** · 04-15-2018, 12:28 PM

3 more pics

.

mrbudd55955 · 04-15-2018, 01:33 PM

I will do the green false door and white 3rd door. Pp sent
Thanks Jeremy

**richard2717** · 04-15-2018, 01:37 PM

Quote:

Originally Posted by mrbudd55955

I will do the green false door and white 3rd door. Pp sent
Thanks Jeremy

Got your payment and they will ship tomorrow. Will pm tracking as well

Thanks Richard

wootownpimp · 04-18-2018, 08:19 PM

Do you still have the Liftgate?

What kind of shape is it in?

**richard2717** · 04-18-2018, 08:33 PM

Quote:

Originally Posted by wootownpimp

Do you still have the Liftgate?

What kind of shape is it in?

I have a couple of them. None are rust free but I suppose are still workable depending on skill level. I will try to get a picture of them tomorrow & post. Do you need glass and hardware as well or just a bare shell?

Richard

WannaBe68 · 04-22-2018, 12:44 PM

Hi Richard,
This thread was recommended for my search for some Suburban ceiling bows.

Not looking for show, but without chips missing from the plastic would be great.
Thanks!

**richard2717** · 04-22-2018, 02:09 PM

Quote:

Originally Posted by WannaBe68

Hi Richard,
This thread was recommended for my search for some Suburban ceiling bows.

Not looking for show, but without chips missing from the plastic would be great.
Thanks!

Sorry all out of bows at the moment.

Richard

WannaBe68 · 04-22-2018, 04:40 PM

Hey thanks for the note - are these something you get in regularly or once in a blue moon?
Thanks again

**richard2717** · 04-23-2018, 06:41 AM

Quote:

Originally Posted by WannaBe68

Hey thanks for the note - are these something you get in regularly or once in a blue moon?
Thanks again

It is one of them deals that I may not have something this morning but never know what will fall in place this afternoon. LOL just never know anymore

WannaBe68 · 04-23-2018, 07:10 AM

I hear ya'...
If you do find a decent set please keep me in mind!

ajgriffin · 05-03-2018, 03:16 PM

Quote:

Originally Posted by richard2717

I have sent the stands off to be rechromed and I have been working on buffing out the rest of the pcs. I am going to wait to see what the stand turn out like before deciding. The other pcs are buffing up really nice. I have a panel truck and 2 blazer projects that I was thinking of using it on one of them, but still up in the air at this point.

Richard

What's the verdict on the roof rack? Is it going to make it onto one of the projects or is it available?

**richard2717** · 05-03-2018, 03:21 PM

Quote:

Originally Posted by ajgriffin

What's the verdict on the roof rack? Is it going to make it onto one of the projects or is it available?

It has already been sold to another member here.

Richard

**richard2717** · 05-20-2018, 09:21 AM

Ttt

carryall · 05-27-2018, 09:56 PM

Quote:

Originally Posted by richard2717

Dwayne
Here is what I have.

two good but not perfect 3rd door sills. One I cleaned up a bit with 0000 wool the other one should do the same

I have the filler neck out of the white sub but gotta figure out a way to get rest of locking cap off without a key

Attachment 1767060

I have this area from the same green suburban I can cut out

Attachment 1767059

Or

I have an auxillary gas setup from a parts truck. Same deal here I don't think i have key for the gas cap.

Attachment 1767061

Attachment 1767062

or

I have a 72 Blazer filler that I "might" part with. Not sure if I still have the rear cover, I can't seem to put my fingers on it at the moment. I need to make sure the one in one of my other projects is good b4 I let it go though.

Attachment 1767063

I would need to get them removed to make sure they are decent all the way around. Let me know which one would work better for you.

Do you have the area around the gas filler? I néed a square if possible

T0ple55 · 05-28-2018, 02:35 AM

Looking for a front passenger side bottom half a pillar complete with door mounting plates. Thanks

**richard2717** · 05-28-2018, 07:36 AM

Quote:

Originally Posted by carryall

Do you have the area around the gas filler? I néed a square if possible

I have already sold that one but I do still have this cut out available. $30 plus shipping and can cut it down based on what you need.

.

**richard2717** · 05-28-2018, 07:39 AM

Quote:

Originally Posted by T0ple55

Looking for a front passenger side bottom half a pillar complete with door mounting plates. Thanks

I have this one. It appears in good shape but I won't fully know until I pull the fender. How high up do you need it? I will try to remove fender today depending on weather. We have had boat loads of rain overnight and still happening on and off this morning.

.

carryall · 05-28-2018, 10:17 AM

Quote:

Originally Posted by richard2717

I have already sold that one but I do still have this cut out available. $30 plus shipping and can cut it down based on what you need.

.

How much would shipping be to 26704

T0ple55 · 05-28-2018, 11:16 AM

About exactly half should work just fine. Thanks again!

**richard2717** · 05-28-2018, 12:11 PM

Quote:

Originally Posted by carryall

How much would shipping be to 26704

If I cut it at the size I have boxed in in red it would be $18 shipping That is roughly a 12'' square. PP is in my signature if you want it

Thanks
Richard

carryall · 05-28-2018, 12:15 PM

Quote:

Originally Posted by richard2717

If I cut it at the size I have boxed in in red it would be $18 shipping That is roughly a 12'' square. PP is in my signature if you want it

Thanks
Richard

That will work. I'll take it.

carryall · 05-28-2018, 12:22 PM

Quote:

Originally Posted by richard2717

If I cut it at the size I have boxed in in red it would be $18 shipping That is roughly a 12'' square. PP is in my signature if you want it

Thanks
Richard

Just sent payment

**richard2717** · 05-28-2018, 12:36 PM

Quote:

Originally Posted by carryall

Just sent payment

Got your payment and will ship tomorrow

04-15-2018, 11:18 AM	#151
mrbudd55955 Registered User Join Date: Feb 2013 Location: dodge center, mn Posts: 9	Re: Parting 72 burb I am just looking for some to get by for now. I have front metal and plastic ones so I would just end up painting them for now.

04-15-2018, 12:28 PM	#153
richard2717 Equal opportunity joke ofender Join Date: Oct 2011 Location: Eastern Shore of MD Posts: 10,135	Re: Parting 72 burb 3 more pics . Attached Images __________________ Members I have met. Dually Jams, OlBlue60, ScottH, Tommyboy24, Dujobo, Warbucket, 2003 Silverado, Notsolo, my90k5, 6t727t2, Special-K ,Jack_71C10, tabarcus,72blazer_mud_bogger,pwdcougar,RSavage,EricSean,1Rippen6,invicta455,tennaragtop71,arks, Kendal,Bennett68C10, Perpendicular, Chainsawman, McGeesCustomMinis,ShortbedClayton,longblue72,6768chevylover,Tim71,Travisarmenta,Ol' Drippy,fleetmitch,georgieb51,Dave,bcnya2,Dadsburb https://paypal.me/6772GMtruckparts Most women like the strong, silent type… Fortunately for me, my wife prefers the out-of-shape, mouthy type.

04-15-2018, 01:33 PM	#154
mrbudd55955 Registered User Join Date: Feb 2013 Location: dodge center, mn Posts: 9	Re: Parting 72 burb I will do the green false door and white 3rd door. Pp sent Thanks Jeremy

04-18-2018, 08:19 PM	#156
wootownpimp Registered User Join Date: Mar 2006 Location: Apple Creek, Ohio Posts: 17	Re: Parting 72 burb Do you still have the Liftgate? What kind of shape is it in?

04-22-2018, 12:44 PM	#158
WannaBe68 Registered User Join Date: Jun 2016 Location: Texas! Posts: 430	Re: Parting 72 burb Hi Richard, This thread was recommended for my search for some Suburban ceiling bows. Not looking for show, but without chips missing from the plastic would be great. Thanks!

04-22-2018, 04:40 PM	#160
WannaBe68 Registered User Join Date: Jun 2016 Location: Texas! Posts: 430	Re: Parting 72 burb Hey thanks for the note - are these something you get in regularly or once in a blue moon? Thanks again

04-23-2018, 07:10 AM	#162
WannaBe68 Registered User Join Date: Jun 2016 Location: Texas! Posts: 430	Re: Parting 72 burb I hear ya'... If you do find a decent set please keep me in mind!

05-20-2018, 09:21 AM	#165
richard2717 Equal opportunity joke ofender Join Date: Oct 2011 Location: Eastern Shore of MD Posts: 10,135	Re: Parting 72 burb Ttt __________________ Members I have met. Dually Jams, OlBlue60, ScottH, Tommyboy24, Dujobo, Warbucket, 2003 Silverado, Notsolo, my90k5, 6t727t2, Special-K ,Jack_71C10, tabarcus,72blazer_mud_bogger,pwdcougar,RSavage,EricSean,1Rippen6,invicta455,tennaragtop71,arks, Kendal,Bennett68C10, Perpendicular, Chainsawman, McGeesCustomMinis,ShortbedClayton,longblue72,6768chevylover,Tim71,Travisarmenta,Ol' Drippy,fleetmitch,georgieb51,Dave,bcnya2,Dadsburb https://paypal.me/6772GMtruckparts Most women like the strong, silent type… Fortunately for me, my wife prefers the out-of-shape, mouthy type.

05-28-2018, 02:35 AM	#167
T0ple55 Registered User Join Date: Apr 2014 Location: Arlington Wa Posts: 45	Re: Parting 72 burb Looking for a front passenger side bottom half a pillar complete with door mounting plates. Thanks __________________ 72 GMC Suburban (dads) 69 SWB Chev (frame off father/son) 70 2wd Jimmy+69 4WD Blazer = PHASED 71 SWB stuffed in the barn

05-28-2018, 11:16 AM	#171
T0ple55 Registered User Join Date: Apr 2014 Location: Arlington Wa Posts: 45	Re: Parting 72 burb About exactly half should work just fine. Thanks again! __________________ 72 GMC Suburban (dads) 69 SWB Chev (frame off father/son) 70 2wd Jimmy+69 4WD Blazer = PHASED 71 SWB stuffed in the barn



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.