What did you do to your truck today.The 3rd chapter - Page 70 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Andy4639 · 01-31-2021, 03:38 PM

Quote:

Originally Posted by Grumpy old man

Installed Rams horn heat shields / looms from Classic parts and 76 Corvette Hei wires from Summit .

Grumpy are those stock RH are aftermarket ones? Just wondering. I looked at a set of the aftermarket ones. You have way more patience than me.

MAC71Cheyenne · 01-31-2021, 03:43 PM

This week has been shovel snow, replace the cargo light switch, shovel snow, install under dash courtesy lights, shovel snow, set the hood properly, chip ice off the driveway, help from you guys figure out my driveshaft issue, new headlights, new steering wheel ...oh, and shovel snow.

**Grumpy old man** · 01-31-2021, 03:54 PM

Quote:

Originally Posted by Andy4639

Grumpy are those stock RH are aftermarket ones? Just wondering. I looked at a set of the aftermarket ones. You have way more patience than me.

If your asking about the chrome rams horn manifolds I bought them from Jegs a few years ago when they had a sale for $127.00 for the set . the heat shields were a pain to install without the fenders in the way ., the wires for (1-3 ) and (2-4) cylinders run down the side of the engine and come back up thru the engine mount to the spark plugs .

**pjmoreland** · 01-31-2021, 05:13 PM

Installed a temporary front fender and made some brackets for the front turn signals so I will be able to drive my truck while several parts are off at the body shop. Waiting for a new cam to arrive so I can finish the Vortec head upgrade.

MAC71Cheyenne · 01-31-2021, 05:14 PM

pjmoreland that is exactly what I want to do with mine. I have the original seat out my ol '67 and would like to have the folding feature in the '71. Nailed the color combo too! Must be the great minds thing!...or just a quinkydink...

Andy4639 · 01-31-2021, 05:25 PM

Quote:

Originally Posted by Grumpy old man

If your asking about the chrome rams horn manifolds I bought them from Jegs a few years ago when they had a sale for $127.00 for the set . the heat shields were a pain to install without the fenders in the way ., the wires for (1-3 ) and (2-4) cylinders run down the side of the engine and come back up thru the engine mount to the spark plugs .

Ok thanks, man $127.00 for the pair great deal sir!

**pjmoreland** · 01-31-2021, 06:06 PM

Quote:

Originally Posted by MAC71Cheyenne

pjmoreland that is exactly what I want to do with mine. I have the original seat out my ol '67 and would like to have the folding feature in the '71. Nailed the color combo too! Must be the great minds thing!...or just a quinkydink...

I was going back and forth between the black/white and black/orange houndstooth, but my wife convinced me the orange wouldn't match my truck, so I gotta give her some credit. I think the black/white looks good with the silver on the gauge cluster bezel.

MAC71Cheyenne · 01-31-2021, 06:27 PM

I'm in love...pjmoreland

**Steeveedee** · 01-31-2021, 06:31 PM

I like the black and white hounds tooth. I have the black vinyl brocade that is just too hot in summer, and it's all split out. I want to replace the cover, but I ain't going back to black if I can help it. I'll show my wife this pic.

72c20customcamper · 01-31-2021, 06:40 PM

Quote:

Originally Posted by Steeveedee

I like the black and white hounds tooth. I have the black vinyl brocade that is just too hot in summer, and it's all split out. I want to replace the cover, but I ain't going back to black if I can help it. I'll show my wife this pic.

I had the black with cloth but at the time couldnt find it reproduced I since have found the correct seat cover but like the hounds tooth . Misses hates the feel of vinyl or even the leather in my Envoy. Specially when shes in shorts which is most of the summer

**zicc1835** · 01-31-2021, 09:16 PM

bought this one for parts

Rich72C10 · 02-03-2021, 10:21 PM

New TH350 Shift Shaft and Speedo gear to be leak free and I installed these sweet license plate holders for front and back that I got off eBay when I brought her home tonight :-)

v8truckin · 02-03-2021, 11:20 PM

Quote:

Originally Posted by Chevys4life

I like those mats very much. They are really nice!!!

Appreciate the comp!

**pjmoreland** · 02-04-2021, 02:01 AM

A picture is worth a thousand words (four letter words, in this case).

OL SKOOL · 02-04-2021, 06:27 AM

Quote:

Originally Posted by pjmoreland

A picture is worth a thousand words (four letter words, in this case).

WOW w.t.h. happened there?

**Boog** · 02-04-2021, 07:55 AM

Looks like a collapsed oil filter. Did someone say Fram?

Rich72C10 · 02-04-2021, 08:03 AM

I am guess I am glad and listen to my brother and got a AC Delco...

**72afr** · 02-04-2021, 09:56 AM

Rebuilt the top end of the steering column yesterday. My truck had a broken hazard switch when I bought it and never replaced. Put in new levers, signal/hazard, and indicators. Only issue was a I mangled the end thread with the puller, so I'm currently trying to figure out to best rectify. Still need to correct the indicator position as well.

**pjmoreland** · 02-04-2021, 11:20 AM

Quote:

Originally Posted by OL SKOOL

WOW w.t.h. happened there?

It's a Mobil1 filter that refused to come off. There was paint on the block and the seal stuck to it. You can see a little red on the seal.. I have since cleaned the paint off. I am also feeling a bit skeptical of the recommended 1-1/4 turns past contact they show on the sticker.

**Already Gone** · 02-05-2021, 03:07 AM

I picked these up to use on my 400 small block build.

Redneck Rydes · 02-05-2021, 08:56 AM

Quote:

Originally Posted by pjmoreland

It's a Mobil1 filter that refused to come off. There was paint on the block and the seal stuck to it. You can see a little red on the seal.. I have since cleaned the paint off. I am also feeling a bit skeptical of the recommended 1-1/4 turns past contact they show on the sticker.

WOW, shouls be only a 1/4 turn,not 1 1/4, that is a little excessive lol

Rich72C10 · 02-05-2021, 09:22 AM

Transmission leaks fixed (shift shaft and Speedo gear) - though I didn't do it myself. Replaced signal mech, hope that nails my short/blowing fuse and after replacing all the screws, inserts, and springs I did a very early morning headlight adjustment a bit ago! Nice to have a morning drive in the truck :-)

Oh and for a nice little topping, noticed my antenna was loose and moved, so I adjusted that when I got home.

**pjmoreland** · 02-05-2021, 01:14 PM

Quote:

Originally Posted by Redneck Rydes

WOW, shouls be only a 1/4 turn,not 1 1/4, that is a little excessive lol

1/4 turn seems a little loose, but I agree 1-1/4 is way too tight.

Andy4639 · 02-05-2021, 01:32 PM

Quote:

Originally Posted by pjmoreland

1/4 turn seems a little loose, but I agree 1-1/4 is way too tight.

Split the deference!

**Already Gone** · 02-05-2021, 01:48 PM

Quote:

Originally Posted by Rich72C10

Transmission leaks fixed (shift shaft and Speedo gear) - though I didn't do it myself. Replaced signal mech, hope that nails my short/blowing fuse and after replacing all the screws, inserts, and springs I did a very early morning headlight adjustment a bit ago! Nice to have a morning drive in the truck :-)

Oh and for a nice little topping, noticed my antenna was loose and moved, so I adjusted that when I got home.

What are using for headlights in your truck ?

01-31-2021, 03:43 PM	#1727
MAC71Cheyenne Registered User Join Date: Aug 2020 Location: Mount Pleasant Iowa Posts: 303	Re: What did you do to your truck today.The 3rd chapter This week has been shovel snow, replace the cargo light switch, shovel snow, install under dash courtesy lights, shovel snow, set the hood properly, chip ice off the driveway, help from you guys figure out my driveshaft issue, new headlights, new steering wheel ...oh, and shovel snow.

01-31-2021, 05:13 PM	#1729
pjmoreland Senior Member Join Date: Jan 2005 Location: CA Posts: 5,818	Re: What did you do to your truck today.The 3rd chapter Installed a temporary front fender and made some brackets for the front turn signals so I will be able to drive my truck while several parts are off at the body shop. Waiting for a new cam to arrive so I can finish the Vortec head upgrade. Attached Images

01-31-2021, 05:14 PM	#1730
MAC71Cheyenne Registered User Join Date: Aug 2020 Location: Mount Pleasant Iowa Posts: 303	Re: What did you do to your truck today.The 3rd chapter pjmoreland that is exactly what I want to do with mine. I have the original seat out my ol '67 and would like to have the folding feature in the '71. Nailed the color combo too! Must be the great minds thing!...or just a quinkydink...

01-31-2021, 06:27 PM	#1733
MAC71Cheyenne Registered User Join Date: Aug 2020 Location: Mount Pleasant Iowa Posts: 303	Re: What did you do to your truck today.The 3rd chapter I'm in love...pjmoreland

01-31-2021, 06:31 PM	#1734
Steeveedee Who Changed This? Join Date: Jan 2013 Location: Simi Valley, CA Posts: 10,614	Re: What did you do to your truck today.The 3rd chapter I like the black and white hounds tooth. I have the black vinyl brocade that is just too hot in summer, and it's all split out. I want to replace the cover, but I ain't going back to black if I can help it. I'll show my wife this pic. __________________ ~Steven '70 Chevy 3/4T Longhorn CST 402/400/3.56 Custom Camper Simi Valley, CA

01-31-2021, 09:16 PM	#1736
zicc1835 Senior Member Join Date: Mar 2011 Location: Hanover NJ Posts: 4,257	Re: What did you do to your truck today.The 3rd chapter bought this one for parts Attached Images __________________ Doc & Kim build http://67-72chevytrucks.com/vboard/s...d.php?t=722288 I am from the desert http://67-72chevytrucks.com/vboard/s...d.php?t=650332 basket case build SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=648557

02-03-2021, 10:21 PM	#1737
Rich72C10 Mr. Cheyenne Join Date: Jun 2020 Location: Kyle, Texas Posts: 1,687	Re: What did you do to your truck today.The 3rd chapter New TH350 Shift Shaft and Speedo gear to be leak free and I installed these sweet license plate holders for front and back that I got off eBay when I brought her home tonight :-) Attached Images __________________ Richard *'72 Chevy C10 Cheyenne Super WHT/MED BRONZE/WHT SBC 350 \| TH350 \| LWB \| AC \| Buddy Seats Upgrades:** Tilt \| Front Sway Bar \| Radio \| Sliding Window \| Bed Spare w/Lock Bed Rails \| Full LEDs \| Courtesy Lights \| Tachometer \| Glovebox Lock & Light \| Head Light Relays \| *Upgraded Fully Super Trim

02-04-2021, 02:01 AM	#1739
pjmoreland Senior Member Join Date: Jan 2005 Location: CA Posts: 5,818	Re: What did you do to your truck today.The 3rd chapter A picture is worth a thousand words (four letter words, in this case). Attached Images

02-04-2021, 07:55 AM	#1741
Boog laying low Join Date: Mar 2001 Location: Searcy, Ark. USA Posts: 13,459	Re: What did you do to your truck today.The 3rd chapter Looks like a collapsed oil filter. Did someone say Fram? __________________ Boog 69 Chevy stepside, 358/T350, 4.11 posi, 4.5/4 drop, rallys, poboy driver primer is finer 91 Chevy sportside, Tahoe, Yukon & GMC Crewcab All GM..'nuff said. I stand for the flag and kneel at the cross

02-04-2021, 08:03 AM	#1742
Rich72C10 Mr. Cheyenne Join Date: Jun 2020 Location: Kyle, Texas Posts: 1,687	Re: What did you do to your truck today.The 3rd chapter I am guess I am glad and listen to my brother and got a AC Delco... __________________ Richard *'72 Chevy C10 Cheyenne Super WHT/MED BRONZE/WHT SBC 350 \| TH350 \| LWB \| AC \| Buddy Seats Upgrades:** Tilt \| Front Sway Bar \| Radio \| Sliding Window \| Bed Spare w/Lock Bed Rails \| Full LEDs \| Courtesy Lights \| Tachometer \| Glovebox Lock & Light \| Head Light Relays \| *Upgraded Fully Super Trim

02-04-2021, 09:56 AM	#1743
72afr Beep! Beep! Join Date: Nov 2003 Location: Rural, MO Posts: 280	Re: What did you do to your truck today.The 3rd chapter Rebuilt the top end of the steering column yesterday. My truck had a broken hazard switch when I bought it and never replaced. Put in new levers, signal/hazard, and indicators. Only issue was a I mangled the end thread with the puller, so I'm currently trying to figure out to best rectify. Still need to correct the indicator position as well. Attached Images __________________ 1972 Chevrolet C/10 shortbed, stepside, 350, HEI, Fire Engine Red, Black Interior, Former Army cargo transport 2003 Chevrolet 2500HD CC 6.0 4wd 2004 Jeep Rubicon some aftermarket stuff... 2019 Jeep Unlimited Rubicon (the wife's baby hauler)

02-05-2021, 03:07 AM	#1745
Already Gone 70+ ( Old Skool Club ) Join Date: Nov 2003 Location: Saskatoon, Saskatchewan ,Canada Posts: 9,141	Re: What did you do to your truck today.The 3rd chapter I picked these up to use on my 400 small block build. Attached Images __________________ 1972 C10 Custom/Deluxe 613 Highlander 406/700R4 1999 White Tahoe LS 4x2 with Z56 Police Package 1992 K1500 GMC Suburban Members I have personally met: MusicMan70 - HeavyD - ChewyChevy67 - StingRay -71SWB4x4 - 67 Burb - DeadheadNM - too much stuff - bc65 - das601 " Circumsatances Do Not Change Responsibility " " The Sky is not the Limit, Your Mind is." Marilyn Monroe .. RIP Charlie Watts 1941 - 2021

02-05-2021, 09:22 AM	#1747
Rich72C10 Mr. Cheyenne Join Date: Jun 2020 Location: Kyle, Texas Posts: 1,687	Re: What did you do to your truck today.The 3rd chapter Transmission leaks fixed (shift shaft and Speedo gear) - though I didn't do it myself. Replaced signal mech, hope that nails my short/blowing fuse and after replacing all the screws, inserts, and springs I did a very early morning headlight adjustment a bit ago! Nice to have a morning drive in the truck :-) Oh and for a nice little topping, noticed my antenna was loose and moved, so I adjusted that when I got home. Attached Images __________________ Richard *'72 Chevy C10 Cheyenne Super WHT/MED BRONZE/WHT SBC 350 \| TH350 \| LWB \| AC \| Buddy Seats Upgrades:** Tilt \| Front Sway Bar \| Radio \| Sliding Window \| Bed Spare w/Lock Bed Rails \| Full LEDs \| Courtesy Lights \| Tachometer \| Glovebox Lock & Light \| Head Light Relays \| *Upgraded Fully Super Trim



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.