What did you do today not on your truck... - Page 71 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**FleetsidePaul** · 11-21-2021, 05:16 AM

My wife bought a solid bronze statue. It took two people to unload it into the garage.

So around 2:00 a.m. after a few beers I decide that I can get it in the house by myself.

This was a really really bad idea. That thing was HEAVY and it was pitch black outside. I couldn't use my flashlight because my hands were full carrying this pig.

So of course I tripped. Hit the concrete hard. Let me tell you one thing about concrete. It hurts when you fall on it. Especially when you have a heavy bronze statue crash down on you on top of it. Then it really hurts.

I still managed to get it in. But I'm a little busted up. My right knee and my finger are jacked up. I'll give them a few days. I don't think I broke anything. Everything still works. It just hurts.

Now my wife is pizzed at me for being an idiot. Se la vie.

LT7A · 11-21-2021, 01:44 PM

Quote:

Originally Posted by FleetsidePaul

My wife bought a solid bronze statue. It took two people to unload it into the garage.

So around 2:00 a.m. after a few beers I decide that I can get it in the house by myself.

This was a really really bad idea. That thing was HEAVY and it was pitch black outside. I couldn't use my flashlight because my hands were full carrying this pig.

So of course I tripped. Hit the concrete hard. Let me tell you one thing about concrete. It hurts when you fall on it. Especially when you have a heavy bronze statue crash down on you on top of it. Then it really hurts.

I still managed to get it in. But I'm a little busted up. My right knee and my finger are jacked up. I'll give them a few days. I don't think I broke anything. Everything still works. It just hurts.
.
Now my wife is pizzed at me for being an idiot. Se la vie.

I respect your efforts and I know that I periodically entertain my neighbors when I unload things out of the back of the truck. Last time for me was a gang box full of tools. I checked to make sure none of the tools would break and then basically rolled it off the tailgate. But it landed on its side and the neighbors could have gotten a good 12 minutes of enjoyment watching me trying to tip it back onto its wheels and keep it from falling into the the side of the truck. Now that you know I honestly do know what it's like and sympathize with your plight I will apologize in advance for making light of your situation. If you haven't already named it, you could call the new bronze piece the statue of limitations.

GOPAPA · 11-21-2021, 02:40 PM

I changed out my door strikers a few days ago ,,with a adjustment they shut like new doors. and I put in a new hood latch and it works good too. next is get the wiring sorted out for back up lights ,, and one brake light .. As some of you know , I sold my 71 last year or so and now I am having my fun days in the garage with this square body 83.

**FleetsidePaul** · 11-21-2021, 03:33 PM

Quote:

Originally Posted by LT7A

I respect your efforts and I know that I periodically entertain my neighbors when I unload things out of the back of the truck. Last time for me was a gang box full of tools. I checked to make sure none of the tools would break and then basically rolled it off the tailgate. But it landed on its side and the neighbors could have gotten a good 12 minutes of enjoyment watching me trying to tip it back onto its wheels and keep it from falling into the the side of the truck. Now that you know I honestly do know what it's like and sympathize with your plight I will apologize in advance for making light of your situation. If you haven't already named it, you could call the new bronze piece the statue of limitations.

Thanks. I think it just comes down to that I think I'm still young. And I'm not.

I fell down again today. I was trying to step over my little dog and he moved right under my foot. I tried not to step on him and lost my balance and crashed into the dining room table.

I just can't seem to keep upright these days.

**Boog** · 11-21-2021, 06:08 PM

Seems you've got the old "bull in a china shop" thing going on too.

Warrens69GMC · 11-21-2021, 06:08 PM

Had to clean road tar off the daily, 2014 Jetta

**3757chevy** · 11-22-2021, 12:09 AM

Went to my Grandson's 4th birthday party.

4u2nv · 11-22-2021, 07:34 AM

Quote:

Originally Posted by 3757chevy

Went to my Grandson's 4th birthday party.

You tried out that bouncy truck didn't you ????
I would have , never seen one like that .
Great fun for him I'm sure

**Ol Blue K20** · 11-22-2021, 08:13 AM

Quote:

Originally Posted by FleetsidePaul

Thanks. I think it just comes down to that I think I'm still young. And I'm not.

I fell down again today. I was trying to step over my little dog and he moved right under my foot. I tried not to step on him and lost my balance and crashed into the dining room table.

I just can't seem to keep upright these days.

maybe too much encouragement!

**3757chevy** · 11-22-2021, 02:18 PM

Quote:

Originally Posted by 4u2nv

You tried out that bouncy truck didn't you ????
I would have , never seen one like that .
Great fun for him I'm sure

Oh yeah! He had a blast. We didn't stick around for the adult session.

mr.mud1 · 11-22-2021, 03:16 PM

today i had a couple stumps sawed up into 2 1/2 inch thick slabs.i plan this winter when i have some spare time,whenever that is???to built some benches for here in the new shop and around the fire pit.

1slo64 · 11-23-2021, 09:16 PM

Put a 2nd coat of white down and then laid my stripes. Going to spray clear tomorrow after I clean up a couple overspray spots. Now that I've done this I feel more confident being able to paint my GMC when the time comes.

Snarl95 · 11-23-2021, 09:40 PM

nice

**LockDoc** · 11-24-2021, 01:11 AM

-
Everyone else puts them up, I tear them down....

The barn is now a ground level structure.

LockDoc

**Rickysnickers** · 11-24-2021, 11:02 AM

Doc, I used to enjoy watching New Yankee Workshop. It was a woodworking show that was on PBS for many years. Anyway, the host used to use a lot of reclaimed wood from barns that had been torn down. What type of wood are your barns made from and do you ever sell or give out the good remnants?

**LockDoc** · 11-24-2021, 01:23 PM

Quote:

Originally Posted by Rickysnickers

Doc, I used to enjoy watching New Yankee Workshop. It was a woodworking show that was on PBS for many years. Anyway, the host used to use a lot of reclaimed wood from barns that had been torn down. What type of wood are your barns made from and do you ever sell or give out the good remnants?

Wood is mostly pine and some cedar. You do find some ash, oak, hickory, and other stuff once in a while but it was added later by owners.

The daughter and I removed most of the outside boards and I have sold some of that. I was just outside salvaging as many of the 4x4's & 6x6's as I could safely reach. I will save more as it is torn apart.

LockDoc

KW5413 · 11-24-2021, 02:13 PM

I started smoking two turkeys today. I inject them, to help keep them juicy, and put a good spice rub on the outside.

I made sure I lost a couple of pounds this past week so I can gain them back again tomorrow...LOL!

**Stocker** · 11-24-2021, 04:45 PM

Changing out our dining room light fixture. We bought a new one years ago when the kitchen was remodeled and it has sat in the box until now...... the Missus decided it was time to do it. I moved the ceiling box to center it on the table. Hardest part was working in the attic because there's not much roof clearance. Started yesterday, all done except removing the old box and patching the hole in the ceiling.

67C10Step · 11-24-2021, 06:20 PM

Replaced the mantle on the fireplace. Two day job getting the old hickory mantle off and install the new rustic one.

Gotenntitans · 11-24-2021, 09:44 PM

Venison down.

57taskforce · 11-25-2021, 12:35 AM

Quote:

Originally Posted by Gotenntitans

Venison down.

Nice buck! I’m one of the unlucky guys who has to get tags thru lottery. I haven’t drawn anything in the last 4 years. Maybe next year… I put in for elk and deer both this year.

**truckster** · 11-25-2021, 01:01 AM

We have the whole family coming for Thanksgiving dinner. My wife wanted a 16x4 table...

**FleetsidePaul** · 11-25-2021, 05:34 AM

I put in a new toilet. Fun fun fun.

I was sick of the old one. You would have to hold down the handle for about 30 seconds to get it to work and hope it did. It was a real crap shoot.

The new one works great. I already broke it in.

LT7A · 11-25-2021, 09:24 AM

Quote:

Originally Posted by truckster

We have the whole family coming for Thanksgiving dinner. My wife wanted a 16x4 table...

You win the helping the wife with Thanksgiving contest. And when the holidays are over, you can move that outside so planes can land and take off.

LT7A · 11-25-2021, 10:16 AM

Quote:

Originally Posted by Ol Blue K20

X2, they look new.

Beautifully done.

11-21-2021, 05:16 AM	#1751
FleetsidePaul R.I.P. E.S.L.L. Join Date: Aug 2005 Location: Kernville CA./ Lake Isabella CA. Posts: 11,419	Re: What did you do today not on your truck... My wife bought a solid bronze statue. It took two people to unload it into the garage. So around 2:00 a.m. after a few beers I decide that I can get it in the house by myself. This was a really really bad idea. That thing was HEAVY and it was pitch black outside. I couldn't use my flashlight because my hands were full carrying this pig. So of course I tripped. Hit the concrete hard. Let me tell you one thing about concrete. It hurts when you fall on it. Especially when you have a heavy bronze statue crash down on you on top of it. Then it really hurts. I still managed to get it in. But I'm a little busted up. My right knee and my finger are jacked up. I'll give them a few days. I don't think I broke anything. Everything still works. It just hurts. Now my wife is pizzed at me for being an idiot. Se la vie. __________________ 1971 Custom C/20 1970 CST 20 1970 C/30 Flatbed 1983 C/30 Dually 2015 Corvette Z51 2021 Corvette Z51 1991 Cadillac Hearse 1982 Cadillac Eldorado Biarritz 2000 Porsche Boxster S 2020 Jeep Gladiator 1973 VW Thing 1973 Plymouth Satellite wagon 1963 Baja Bug 1959 Bug Dune Buggy 1970 Baja Bug 1987 Jaguar XJ 350. R.I.P. El Jay R.I.P Jessie. R.I.P Grumpy. Every day is a gift from God.

11-21-2021, 02:40 PM	#1753
GOPAPA Senior Member Join Date: Oct 2007 Location: Nampa Idaho Posts: 7,551	Re: What did you do today not on your truck... I changed out my door strikers a few days ago ,,with a adjustment they shut like new doors. and I put in a new hood latch and it works good too. next is get the wiring sorted out for back up lights ,, and one brake light .. As some of you know , I sold my 71 last year or so and now I am having my fun days in the garage with this square body 83. __________________ When you learn a thing a day you store up smart. Last edited by GOPAPA; 11-21-2021 at 03:05 PM.

11-21-2021, 06:08 PM	#1755
Boog laying low Join Date: Mar 2001 Location: Searcy, Ark. USA Posts: 13,433	Re: What did you do today not on your truck... Seems you've got the old "bull in a china shop" thing going on too. __________________ Boog 69 Chevy stepside, 358/T350, 4.11 posi, 4.5/4 drop, rallys, poboy driver primer is finer 91 Chevy sportside, Tahoe, Yukon & GMC Crewcab All GM..'nuff said. I stand for the flag and kneel at the cross

11-21-2021, 06:08 PM	#1756
Warrens69GMC Registered User Join Date: Jan 2003 Location: Safford,AZ Posts: 3,612	Re: What did you do today not on your truck... Had to clean road tar off the daily, 2014 Jetta

11-22-2021, 12:09 AM	#1757
3757chevy Senior Member Join Date: Mar 2016 Location: Near Canon City ,Colorado Posts: 4,019	Re: What did you do today not on your truck... Went to my Grandson's 4th birthday party. Attached Images __________________ '35 1/2 ton Pickup (bought 2020) '68 C10 Suburban (bought 2021) '72 K5 Blazer (bought 2013) '67 Stepside (bought 1997-sold 2021) '96 Bronco Eddie Bauer (inherited 2010) My 1st day here-'67 C10(sold)and '72 K5 Blazer http://67-72chevytrucks.com/vboard/s...d.php?t=702056 "Another Blue Chevy"(1935) http://67-72chevytrucks.com/vboard/s...d.php?t=799203 '68 Burb...https://67-72chevytrucks.com/vboard/...d.php?t=822994 MIKE

11-22-2021, 03:16 PM	#1761
mr.mud1 Registered User Join Date: Dec 2020 Location: Joggins Nova Scotia Posts: 1,597	Re: What did you do today not on your truck... today i had a couple stumps sawed up into 2 1/2 inch thick slabs.i plan this winter when i have some spare time,whenever that is???to built some benches for here in the new shop and around the fire pit. Attached Images

11-23-2021, 09:16 PM	#1762
1slo64 Registered User Join Date: Feb 2019 Location: Madison, AL Posts: 322	Re: What did you do today not on your truck... Put a 2nd coat of white down and then laid my stripes. Going to spray clear tomorrow after I clean up a couple overspray spots. Now that I've done this I feel more confident being able to paint my GMC when the time comes. __________________ 1964 GMC Fleetside SWB 1966 Mustang Coupe 2013 Tahoe LT

11-23-2021, 09:40 PM	#1763
Snarl95 Registered User Join Date: Jan 2019 Location: edenton nc Posts: 76	Re: What did you do today not on your truck... nice __________________ 1995 k3500 cclb srw 6.5 turbo diesel. The lessons that hurt are the lessons that teach. There is always a price to pay. You are free to make any decision you want. You are not free from the consequences.

11-24-2021, 01:11 AM	#1764
LockDoc The Older Generation Join Date: Aug 2006 Location: Montezuma, Iowa Posts: 25,629	Re: What did you do today not on your truck... - Everyone else puts them up, I tear them down.... The barn is now a ground level structure. LockDoc Attached Images __________________ Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 -

11-24-2021, 11:02 AM	#1765
Rickysnickers Senior Member Join Date: Oct 2014 Location: Eagle, ID Posts: 3,018	Re: What did you do today not on your truck... Doc, I used to enjoy watching New Yankee Workshop. It was a woodworking show that was on PBS for many years. Anyway, the host used to use a lot of reclaimed wood from barns that had been torn down. What type of wood are your barns made from and do you ever sell or give out the good remnants?

11-24-2021, 02:13 PM	#1767
KW5413 Registered User Join Date: Jul 2021 Location: Rowlett, TX Posts: 493	Re: What did you do today not on your truck... I started smoking two turkeys today. I inject them, to help keep them juicy, and put a good spice rub on the outside. I made sure I lost a couple of pounds this past week so I can gain them back again tomorrow...LOL!

11-24-2021, 04:45 PM	#1768
Stocker 20' Daredevil (Ret) Join Date: May 2003 Location: Jefferson State Posts: 13,688	Re: What did you do today not on your truck... Changing out our dining room light fixture. We bought a new one years ago when the kitchen was remodeled and it has sat in the box until now...... the Missus decided it was time to do it. I moved the ceiling box to center it on the table. Hardest part was working in the attic because there's not much roof clearance. Started yesterday, all done except removing the old box and patching the hole in the ceiling. __________________ - Mike - 1972 K20 LWB 350/350/205 RIP El Jay

11-24-2021, 06:20 PM	#1769
67C10Step Registered User Join Date: Jul 2019 Location: Beebe, AR Posts: 2,471	Re: What did you do today not on your truck... Replaced the mantle on the fireplace. Two day job getting the old hickory mantle off and install the new rustic one. Attached Images __________________ 1967 C10 1980 Jeep CJ5 2020 Toyota 4Runner 2024 Toyota Tundra

11-24-2021, 09:44 PM	#1770
Gotenntitans Registered User Join Date: Aug 2013 Location: Camden, Arkansas Posts: 984	Re: What did you do today not on your truck... Venison down. __________________ GoTennTitans 1987 GMC Sierra 1990 GMC Sierra (stolen) 2003 Chevy Silverado

11-25-2021, 01:01 AM	#1772
truckster Senior Member Join Date: Jan 2001 Location: Orem, Utah Posts: 7,953	Re: What did you do today not on your truck... We have the whole family coming for Thanksgiving dinner. My wife wanted a 16x4 table... Attached Images __________________ I have sworn upon the altar of God, eternal hostility against every form of tyranny over the mind of man. - Thomas Jefferson



Register or Log In To remove these advertisements.

11-25-2021, 05:34 AM	#1773
FleetsidePaul R.I.P. E.S.L.L. Join Date: Aug 2005 Location: Kernville CA./ Lake Isabella CA. Posts: 11,419	Re: What did you do today not on your truck... I put in a new toilet. Fun fun fun. I was sick of the old one. You would have to hold down the handle for about 30 seconds to get it to work and hope it did. It was a real crap shoot. The new one works great. I already broke it in. __________________ 1971 Custom C/20 1970 CST 20 1970 C/30 Flatbed 1983 C/30 Dually 2015 Corvette Z51 2021 Corvette Z51 1991 Cadillac Hearse 1982 Cadillac Eldorado Biarritz 2000 Porsche Boxster S 2020 Jeep Gladiator 1973 VW Thing 1973 Plymouth Satellite wagon 1963 Baja Bug 1959 Bug Dune Buggy 1970 Baja Bug 1987 Jaguar XJ 350. R.I.P. El Jay R.I.P Jessie. R.I.P Grumpy. Every day is a gift from God.

Register or Log In To remove these advertisements.