Tootsie build for my mother with cancer - Page 71 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**superflysteiny** · 01-13-2013, 10:36 PM

Thanks guys appreciate all the nice comments on the truck. As far as the brake lines go they are not below the lowest part of the frame. Also they are up a lot. And when this truck is fully aired out the frame is at least 2 inches off the ground. There is really not a lot of room to run things on this frame being round and all of he gussets. Hope this helps. Thank again guys
Posted via Mobile Device

babyblueoval · 01-13-2013, 10:40 PM

Quote:

Originally Posted by superflysteiny

Thanks guys appreciate all the nice comments on the truck. As far as the brake lines go they are not below the lowest part of the frame. Also they are up a lot. And when this truck is fully aired out the frame is at least 2 inches off the ground. There is really not a lot of room to run things on this frame being round and all of he gussets. Hope this helps. Thank again guys
Posted via Mobile Device

Good to hear, I thought it might just been the angle of the pic.

**superflysteiny** · 01-13-2013, 10:45 PM

I thought about the samething you did but with the exhaust running through there I really don't have a ton of options. I know you don't want anything hanging under the truck. Lets hope nothing comes up that high and hits it. I am thinking I have it up high enough but I will look to see if I can relocate it but I am sure this was my only option of I want to keep the proportional valve out of sight. I may build something to protect the line. Better to be safe then sorry
Posted via Mobile Device

babyblueoval · 01-13-2013, 10:51 PM

Maybe a piece of steel plate to protect them? Maybe a strip of milled billet aluminum mounted flush with the frame that has two cut outs for the brake lines to run through?
It's certainly not my truck and mine probably won't be this nice either, lol, but I wouldn't be comfortable with brake lines hanging under the frame that close to the ground. Just my $.02.

**superflysteiny** · 01-13-2013, 10:58 PM

Point taken and I agree
Posted via Mobile Device

shawno72 · 01-13-2013, 11:15 PM

Absolutely amazing Eric!! Definately can not wait to see this thing in person.

Posted via Mobile Device

**superflysteiny** · 01-14-2013, 01:52 PM

Thanks Shawn I am ready for this truck to be done. It is a money pit lol

shawno72 · 01-14-2013, 02:06 PM

Quote:

Originally Posted by superflysteiny

Thanks Shawn I am ready for this truck to be done. It is a money pit lol

Aren't they all?! Mine sure have been

**superflysteiny** · 01-14-2013, 02:51 PM

Quote:

Originally Posted by 67cheby

Looks amazing !

Thanks brother congrats to you for truck of the yr it is well deserved

Quote:

Originally Posted by shawno72

Aren't they all?! Mine sure have been

Ya they are

**67cheby** · 01-14-2013, 02:00 PM

Looks amazing !

**67cheby** · 01-14-2013, 03:03 PM

and congrats on your 2013 TOTY ! LOL

shawno72 · 01-14-2013, 04:00 PM

Quote:

Originally Posted by 67cheby

and congrats on your 2013 TOTY ! LOL

**superflysteiny** · 01-14-2013, 07:07 PM

Quote:

Originally Posted by 67cheby

and congrats on your 2013 TOTY ! LOL

lol I am cracking up right now

Quote:

Originally Posted by 69swb

WOW this truck is sick! That's some amazing fab work on the frame, the old school graphic on the door is awesome and REALLY like that sub box too... Just to name a few things.

Thank you

Quote:

Originally Posted by shawno72

Lol this was great

Rusbuilt · 01-14-2013, 08:35 PM

I love it Eric!

**superflysteiny** · 01-15-2013, 02:06 AM

Posted via Mobile Device

**superflysteiny** · 01-15-2013, 02:10 AM

Posted via Mobile Device

Rusbuilt · 01-15-2013, 09:52 AM

Nice! Will the inner fenders be black or the body color?

**oldman3** · 01-15-2013, 10:00 AM

Really looking good, nice work...Jim

JRANGER · 01-15-2013, 10:29 AM

Wow, those turned out great

**superflysteiny** · 01-15-2013, 12:45 PM

Quote:

Originally Posted by Rusbuilt

Nice! Will the inner fenders be black or the body color?

Body color

Quote:

Originally Posted by oldman3

Really looking good, nice work...Jim

Thanks Jim

Quote:

Originally Posted by JRANGER

Wow, those turned out great

Not finish welded yet but we are close. I will get rid of the speed holes were the fenders cross. All the black will be orange.

aggie91 · 01-15-2013, 12:53 PM

Looking good, Eric! Your attention to detail is outstanding and the work is moving right along.

Hope your Mom and family are doing good. Has she seen the truck lately or are you planning a surprise for her with it complete?

Can't wait for more...

**superflysteiny** · 01-15-2013, 01:09 PM

Thanks Karl
She has not seen the truck in a while. The truck is in another town 30 minutes away. She is going through chemo and radiation again so she has been really sick. She is on her last round and she will be done with treatment. As of now they say she is cancer free but they said that before to so time will tell. Thanks for asking

69CST-V · 01-15-2013, 01:18 PM

You have once again out done yourself. You keep raising the bar. Awesome work.

shawno72 · 01-15-2013, 01:31 PM

Looking great as ever. I'll pray for your moms victory against this cancer.

**superflysteiny** · 01-15-2013, 01:45 PM

Quote:

Originally Posted by 69CST-V

You have once again out done yourself. You keep raising the bar. Awesome work.

Thank you I have has a ton of help. The fenders were build by bill Novelli he is doing an awsome job

Quote:

Originally Posted by shawno72

Looking great as ever. I'll pray for your moms victory against this cancer.

Thank you

01-13-2013, 10:36 PM	#1
superflysteiny Senior Member Join Date: Nov 2008 Location: orangevale ca Posts: 4,630	Re: Tootsie build for my mother with cancer Thanks guys appreciate all the nice comments on the truck. As far as the brake lines go they are not below the lowest part of the frame. Also they are up a lot. And when this truck is fully aired out the frame is at least 2 inches off the ground. There is really not a lot of room to run things on this frame being round and all of he gussets. Hope this helps. Thank again guys Posted via Mobile Device __________________ Tootsie build T Shirts (Supporting Colon Cancer research) Tootsie- a truck for my mother Pops 72 Cheyenne Dropmember build 67 Second Chance project from hell

01-13-2013, 10:45 PM	#3
superflysteiny Senior Member Join Date: Nov 2008 Location: orangevale ca Posts: 4,630	Re: Tootsie build for my mother with cancer I thought about the samething you did but with the exhaust running through there I really don't have a ton of options. I know you don't want anything hanging under the truck. Lets hope nothing comes up that high and hits it. I am thinking I have it up high enough but I will look to see if I can relocate it but I am sure this was my only option of I want to keep the proportional valve out of sight. I may build something to protect the line. Better to be safe then sorry Posted via Mobile Device __________________ Tootsie build T Shirts (Supporting Colon Cancer research) Tootsie- a truck for my mother Pops 72 Cheyenne Dropmember build 67 Second Chance project from hell

01-13-2013, 10:51 PM	#4
babyblueoval Registered User Join Date: Apr 2006 Location: Arkansas Posts: 835	Re: Tootsie build for my mother with cancer Maybe a piece of steel plate to protect them? Maybe a strip of milled billet aluminum mounted flush with the frame that has two cut outs for the brake lines to run through? It's certainly not my truck and mine probably won't be this nice either, lol, but I wouldn't be comfortable with brake lines hanging under the frame that close to the ground. Just my $.02. __________________ Jim '71 Blazer-Porterbuilt Dropmember C4/LS1/6L80E '57 VW beetle - Oct. 2006 Hot VW's pg. 87 - 350hp intercooled, turbocharged, EFI 2.3liter and 5spd in the works '87 BMW 325i - daily driver

01-13-2013, 10:58 PM	#5
superflysteiny Senior Member Join Date: Nov 2008 Location: orangevale ca Posts: 4,630	Re: Tootsie build for my mother with cancer Point taken and I agree Posted via Mobile Device __________________ Tootsie build T Shirts (Supporting Colon Cancer research) Tootsie- a truck for my mother Pops 72 Cheyenne Dropmember build 67 Second Chance project from hell

01-13-2013, 11:15 PM	#6
shawno72 C/10 junkie Join Date: Nov 2010 Location: Stockton Ca Posts: 9,093	Re: Tootsie build for my mother with cancer Absolutely amazing Eric!! Definately can not wait to see this thing in person. Posted via Mobile Device __________________ Shawn 70 LWB C10 current driver/project http://67-72chevytrucks.com/vboard/s...d.php?t=663051 68 SWB C10 Work in progress.....SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=559520 72 LWB C10 Sold 71 LWB C10 Sold 68 LWB C10 CST Sold http://youtu.be/kbB0QrBIs9k My mom always had the best advice. It was just a tad late. After a fall that involved blood, she'd say....."Careful!"

01-14-2013, 01:52 PM	#7
superflysteiny Senior Member Join Date: Nov 2008 Location: orangevale ca Posts: 4,630	Re: Tootsie build for my mother with cancer Thanks Shawn I am ready for this truck to be done. It is a money pit lol __________________ Tootsie build T Shirts (Supporting Colon Cancer research) Tootsie- a truck for my mother Pops 72 Cheyenne Dropmember build 67 Second Chance project from hell

01-14-2013, 02:00 PM	#10
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: Tootsie build for my mother with cancer Looks amazing ! __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

01-14-2013, 03:03 PM	#11
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: Tootsie build for my mother with cancer and congrats on your 2013 TOTY ! LOL __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

01-14-2013, 08:35 PM	#14
Rusbuilt Registered User Join Date: Mar 2012 Location: Knoxville, TN Posts: 5,381	Re: Tootsie build for my mother with cancer I love it Eric! __________________ -Rus PLEASE HELP WITH PROJECT UNDERHAULINPaypal donations accepted @ rus1785@yahoo.com Rusbuilt's garage 1968 Chevy C-30 Darcy SOLD Rusbuilt shop truck *SOLD*

01-15-2013, 02:06 AM	#15
superflysteiny Senior Member Join Date: Nov 2008 Location: orangevale ca Posts: 4,630	Re: Tootsie build for my mother with cancer Posted via Mobile Device __________________ Tootsie build T Shirts (Supporting Colon Cancer research) Tootsie- a truck for my mother Pops 72 Cheyenne Dropmember build 67 Second Chance project from hell

01-15-2013, 02:10 AM	#16
superflysteiny Senior Member Join Date: Nov 2008 Location: orangevale ca Posts: 4,630	Re: Tootsie build for my mother with cancer Posted via Mobile Device __________________ Tootsie build T Shirts (Supporting Colon Cancer research) Tootsie- a truck for my mother Pops 72 Cheyenne Dropmember build 67 Second Chance project from hell

01-15-2013, 09:52 AM	#17
Rusbuilt Registered User Join Date: Mar 2012 Location: Knoxville, TN Posts: 5,381	Re: Tootsie build for my mother with cancer Nice! Will the inner fenders be black or the body color? __________________ -Rus PLEASE HELP WITH PROJECT UNDERHAULINPaypal donations accepted @ rus1785@yahoo.com Rusbuilt's garage 1968 Chevy C-30 Darcy SOLD Rusbuilt shop truck *SOLD*

01-15-2013, 10:00 AM	#18
oldman3 Senior Member Join Date: Mar 2011 Location: West Plains, Missouri Posts: 7,559	Re: Tootsie build for my mother with cancer Really looking good, nice work...Jim __________________ my build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=459839 Jimbo's long bed step build:http://67-72chevytrucks.com/vboard/s...t=464626<br />

01-15-2013, 10:29 AM	#19
JRANGER Registered User Join Date: Nov 2011 Location: Nashville TN Posts: 3,595	Re: Tootsie build for my mother with cancer Wow, those turned out great __________________ PLEASE HELP WITH PROJECT UNDERHAULIN http://67-72chevytrucks.com/vboard/showthread.php?t=306320 Gemini - 1978 GMC C15 High Sierra - 305 c/e - Given to Mother Electra - 1967 Mustang Coupe - 302/w 3 speed Build Chyna - 1968 Chevy C20 Long Stepper

01-15-2013, 12:53 PM	#21
aggie91 I'm just glad to be here! Join Date: Jan 2008 Location: Longview, TX Posts: 4,788	Re: Tootsie build for my mother with cancer Looking good, Eric! Your attention to detail is outstanding and the work is moving right along. Hope your Mom and family are doing good. Has she seen the truck lately or are you planning a surprise for her with it complete? Can't wait for more... __________________ Karl 1965 Chevy Stepside(Grandpa's Old Blue) and (July 2015 Shop Build!)(2020, the Saga Continues) http://67-72chevytrucks.com/vboard/s...d.php?t=372424 The LST Challenge: http://67-72chevytrucks.com/vboard/s...=1#post7812257 Korbin's 1st Square: "Sunburn" http://67-72chevytrucks.com/vboard/s...d.php?t=418618 1985 GMC Sierra: "White Trash", Korbin's 2nd now... http://67-72chevytrucks.com/vboard/s...d.php?t=632305 Henry - 1984 Chevrolet, Owen's 1st Square



Register or Log In To remove these advertisements.

01-15-2013, 01:09 PM	#22
superflysteiny Senior Member Join Date: Nov 2008 Location: orangevale ca Posts: 4,630	Re: Tootsie build for my mother with cancer Thanks Karl She has not seen the truck in a while. The truck is in another town 30 minutes away. She is going through chemo and radiation again so she has been really sick. She is on her last round and she will be done with treatment. As of now they say she is cancer free but they said that before to so time will tell. Thanks for asking __________________ Tootsie build T Shirts (Supporting Colon Cancer research) Tootsie- a truck for my mother Pops 72 Cheyenne Dropmember build 67 Second Chance project from hell

01-15-2013, 01:18 PM	#23
69CST-V Registered User Join Date: Mar 2010 Location: Piper, KS Posts: 683	Re: Tootsie build for my mother with cancer You have once again out done yourself. You keep raising the bar. Awesome work. __________________ Bryce '69 SWB Fleet Still Under Construction Company Trucks

01-15-2013, 01:31 PM	#24
shawno72 C/10 junkie Join Date: Nov 2010 Location: Stockton Ca Posts: 9,093	Re: Tootsie build for my mother with cancer Looking great as ever. I'll pray for your moms victory against this cancer. __________________ Shawn 70 LWB C10 current driver/project http://67-72chevytrucks.com/vboard/s...d.php?t=663051 68 SWB C10 Work in progress.....SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=559520 72 LWB C10 Sold 71 LWB C10 Sold 68 LWB C10 CST Sold http://youtu.be/kbB0QrBIs9k My mom always had the best advice. It was just a tad late. After a fall that involved blood, she'd say....."Careful!"

Register or Log In To remove these advertisements.