![]() |
|
![]() |
#1 |
Senior Member
![]() Join Date: Mar 2011
Location: West Plains, Missouri
Posts: 7,559
|
My 50 roadster pickup build
First thing is my truck has been done for about 7 years, and has about 16,000 miles (I know that's not much, but I have my reasons). About 25 yrs ago my son and I were going to do a father/son project building a roadster pickup. We bought a truck, but it never got going, and he sold the truck. So after I retired and moved to Missouri, I decided to build a pickup, he talked me into doing the roadster, because of old times, and I'm glad I did. I'm 65 years old and have a few builds under my belt. Many of the builds on here make me look like a beginner. I still work on cars and trucks, and my son (moved here a few years ago) and I are starting a 52 AD for him, I'll let him post that. I joined the site in March 2011, and posted a few pics on threads that members were asking about how to's. I have been asked by a couple of members to show my build. All my pictures were taken with an old 35MM and I have had to scan them to my computor. I will post 5 to 15 pics a day with what I did. Will answer any questions anyone may have (if there are any). Hope you enjoy the build.
Last edited by oldman3; 05-14-2011 at 10:22 AM. |
![]() |
![]() |
![]() |
#2 |
Senior Member
![]() Join Date: Mar 2011
Location: West Plains, Missouri
Posts: 7,559
|
Re: My 50 roadster pickup build
This is the 32 Chevy I had for over 20 years, I sold it so I could afford to build the pickup. These are the two I started with.
|
![]() |
![]() |
![]() |
#3 |
Senior Member
![]() Join Date: Mar 2011
Location: West Plains, Missouri
Posts: 7,559
|
Re: My 50 roadster pickup build
Before I could start building the pickup I had to build a shop. I started the shop in 1998 and had it inclosed before winter. Because of cold weather I didn't start working on the pickup till 1999. Picture of the shop and the two pickups.
|
![]() |
![]() |
![]() |
#4 |
Senior Member
![]() Join Date: Mar 2011
Location: West Plains, Missouri
Posts: 7,559
|
Re: My 50 roadster pickup build
Another shot of the two pickups, the rusty one is a 51 5 window and the primer one is a 50 standard cab. This is the body I will use to cut off the top.
Last edited by oldman3; 04-17-2011 at 09:19 PM. |
![]() |
![]() |
![]() |
#5 |
Senior Member
![]() Join Date: Mar 2011
Location: West Plains, Missouri
Posts: 7,559
|
Re: My 50 roadster pickup build
A few months after getting the shop done I found another pickup. This one was a 52 5 window, had an excellent grill and had a 54 bed just sitting on the frame, not attached. I had already decided I wanted a 54 bed, so I bought this one and added it to the collection.
|
![]() |
![]() |
![]() |
#6 |
Senior Member
![]() Join Date: Mar 2011
Location: West Plains, Missouri
Posts: 7,559
|
Re: My 50 roadster pickup build
First thing I did was take the bed off the frame, and disassemble, the passenger side of bed had been in a wreck, and would have to have a lot of work to straighten out. More on that later.
Last edited by oldman3; 04-17-2011 at 09:25 PM. |
![]() |
![]() |
![]() |
#7 |
Registered User
Join Date: Sep 2009
Location: Monroe,Iowa
Posts: 4,370
|
Re: My 50 roadster pickup build
I'm jealous you started off with better trucks than I'm trying to work with!! Love that 32
|
![]() |
![]() |
![]() |
#8 |
Registered User
Join Date: Dec 2002
Location: Cactus Patch So. Az
Posts: 4,749
|
Re: My 50 roadster pickup build
Hay, Younger than me 3!!!
Like you, we all have started many projects over the years some we keep and some we sell to fund the next project. Well, I am at the stage of the next build, only my second , and LAST I need a garage and I need some info on yours. Can you send me a PM and I will pick your grey matter on a few ways to cut cost, just like a car project. Thanks Bob
__________________
53 TuTone Extended Cab 350 4-Spd 3:08 (SOLD) 53 Chevy Moldy pearl green ZZ-4 4L60E 9" 3:25 55 GMC 1st Black Mll (ZZ4) ZZ6 TKO 600 5 sp 3:73 62 Solidaxle Corvette Roman Red (327 340hp 4spd 3:36) C4 & C5 suspension tube chassis LS 3 4L70E 65 Corvette Coupe 327 350hp 4spd 4:11 78 Black Silverado SWB (350/350) 5.3 & 4L60E 3:42 2000 S-Type 3.0 (wife cruiser) 2003 GMC SCSB 5.3 4L60E 3:42 |
![]() |
![]() |
![]() |
#9 |
VA72C10
![]() Join Date: Mar 2008
Location: Midlothian, VA
Posts: 25,269
|
Re: My 50 roadster pickup build
cool, looking forward to following along and seeing the end result
![]()
__________________
Looking for a 67-72 swb or blazer project in or around VA. ![]() |
![]() |
![]() |
![]() |
#10 |
Registered User
Join Date: Aug 2007
Location: Corona, California
Posts: 7,998
|
Re: My 50 roadster pickup build
Looks like a nice 32 you got rid of to do the truck.
Do keep the pics coming as the build should be very interesting. Kim |
![]() |
![]() |
![]() |
#11 |
Senior Member
![]() Join Date: Mar 2011
Location: West Plains, Missouri
Posts: 7,559
|
Re: My 50 roadster pickup build
Well here's todays pictures. I had ordered this spring kit from a company called Lunatic, I think they were in Washington state, I believe they are out of business now. I was very satisfied with their products. Everything bolted in place (I also welded) after removing old brackets (rusty stuff).
__________________
my build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=459839 Jimbo's long bed step build:http://67-72chevytrucks.com/vboard/s...t=464626<br /> |
![]() |
![]() |
![]() |
#12 |
Senior Member
![]() Join Date: Mar 2011
Location: West Plains, Missouri
Posts: 7,559
|
Re: My 50 roadster pickup build
Pic 1 I checked all the frames and the 52 frame was the best one, here I'm removing the old rear axle, and will start on the brackets, etc.
Pic 2 Setting up the Nova rear axle, with spring kit.
__________________
my build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=459839 Jimbo's long bed step build:http://67-72chevytrucks.com/vboard/s...t=464626<br /> |
![]() |
![]() |
![]() |
#13 |
Senior Member
![]() Join Date: Mar 2011
Location: West Plains, Missouri
Posts: 7,559
|
Re: My 50 roadster pickup build
Pic 1 Welding in 2" angle iron to the frame, so I can cut off the hump, this will allow me to mount the 54 bed on the 52 frame. Running boards will mount in the same locations.
Pic 2 This is a little better shot. Pic 3 Here I've cut off the hump, bent the short edges down and welded to the angle. I will box this section later. You can also see the 2" lowering block under the axle.
__________________
my build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=459839 Jimbo's long bed step build:http://67-72chevytrucks.com/vboard/s...t=464626<br /> Last edited by oldman3; 04-22-2011 at 10:20 PM. |
![]() |
![]() |
![]() |
#14 |
Senior Member
![]() Join Date: Mar 2011
Location: West Plains, Missouri
Posts: 7,559
|
Re: My 50 roadster pickup build
I bought new wood and runners from Classis Parts (was Chevy Duty) installed and put bed back together for checking fit to frame, etc.
__________________
my build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=459839 Jimbo's long bed step build:http://67-72chevytrucks.com/vboard/s...t=464626<br /> |
![]() |
![]() |
![]() |
#15 |
Certified Car Nut
Join Date: Jan 2005
Location: Inglewood, California
Posts: 3,118
|
Re: My 50 roadster pickup build
Well I would love to have that shop. It looks to have a lot of room, but I guess just when you think you have enough room it gets used up pretty quick. -
|
![]() |
![]() |
![]() |
#16 |
Senior Member
![]() Join Date: Mar 2011
Location: West Plains, Missouri
Posts: 7,559
|
Re: My 50 roadster pickup build
Shop is 30 X 40, these pics are when it was new, you should see it now, tools, cabinets, shelves, but still have room to work.
__________________
my build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=459839 Jimbo's long bed step build:http://67-72chevytrucks.com/vboard/s...t=464626<br /> |
![]() |
![]() |
![]() |
#17 |
Senior Member
![]() Join Date: Mar 2011
Location: West Plains, Missouri
Posts: 7,559
|
Re: My 50 roadster pickup build
Pic 1 Here I'm marking up the frame to remove extra material for boxing frame.
Pic 2 Checking again for fit. Pic 3 Boxing plate welded in place, the red on inside of frame is were it was painted with Eastwood encapsulator paint.
__________________
my build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=459839 Jimbo's long bed step build:http://67-72chevytrucks.com/vboard/s...t=464626<br /> |
![]() |
![]() |
![]() |
#18 |
Senior Member
![]() Join Date: Mar 2011
Location: West Plains, Missouri
Posts: 7,559
|
Re: My 50 roadster pickup build
This is my crossmember for a MII system. Crossmember is from Lunatic, I added the angled brackets (from Michael Thomas). Crossmember only had straight holes through the unit.
__________________
my build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=459839 Jimbo's long bed step build:http://67-72chevytrucks.com/vboard/s...t=464626<br /> |
![]() |
![]() |
![]() |
#19 |
Senior Member
![]() Join Date: Mar 2011
Location: West Plains, Missouri
Posts: 7,559
|
Re: My 50 roadster pickup build
Here the crossmember is installed in the frame, also cut a notch in bottom of frame for rack unit. Power rack from JPL. Still need to trim notch pieces.
__________________
my build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=459839 Jimbo's long bed step build:http://67-72chevytrucks.com/vboard/s...t=464626<br /> |
![]() |
![]() |
![]() |
#20 |
VA72C10
![]() Join Date: Mar 2008
Location: Midlothian, VA
Posts: 25,269
|
Re: My 50 roadster pickup build
this will be a cool build, good progress every day
![]()
__________________
Looking for a 67-72 swb or blazer project in or around VA. ![]() |
![]() |
![]() |
![]() |
#21 |
Registered User
Join Date: Jul 2010
Location: Columbia Mo
Posts: 395
|
Re: My 50 roadster pickup build
Hey Old man I guess I missed your first post, My folks are from Mt View Mo I have been to that area a lot,I have several Aunts, Uncles and Cousins round them parts. I'll be watching your build looks good
Joe
__________________
http://67-72chevytrucks.com/vboard/s...d.php?t=413926 http://youtu.be/Qe9xJUhWkWc |
![]() |
![]() |
![]() |
#22 |
Senior Member
![]() Join Date: Mar 2011
Location: West Plains, Missouri
Posts: 7,559
|
Re: My 50 roadster pickup build
Thanks Joe, yeah Mt. View is only 19 miles up the road from my place, I live on US 160 and take MO17 to Mt. View.
__________________
my build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=459839 Jimbo's long bed step build:http://67-72chevytrucks.com/vboard/s...t=464626<br /> |
![]() |
![]() |
![]() |
#23 |
Senior Member
![]() Join Date: Mar 2011
Location: West Plains, Missouri
Posts: 7,559
|
Re: My 50 roadster pickup build
Hey guys, posting early today, have stuff to do later.
Got the new cowl panels welded in place.
__________________
my build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=459839 Jimbo's long bed step build:http://67-72chevytrucks.com/vboard/s...t=464626<br /> |
![]() |
![]() |
![]() |
#24 |
Senior Member
![]() Join Date: Mar 2011
Location: West Plains, Missouri
Posts: 7,559
|
Re: My 50 roadster pickup build
Pic 1 Started installing "*****in" floor kit. Kit came with new braces, body mounts, etc. Passenger side view.
Pic 2 Drivers side view.
__________________
my build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=459839 Jimbo's long bed step build:http://67-72chevytrucks.com/vboard/s...t=464626<br /> |
![]() |
![]() |
![]() |
#25 |
Senior Member
![]() Join Date: Mar 2011
Location: West Plains, Missouri
Posts: 7,559
|
Re: My 50 roadster pickup build
I guess site would not show company name because of the langauge, it starts with a B and rhymes with witch. Anyhow here is the center hump installed, it was a two piece deal, made for easy alignment.
__________________
my build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=459839 Jimbo's long bed step build:http://67-72chevytrucks.com/vboard/s...t=464626<br /> Last edited by oldman3; 03-11-2018 at 10:30 AM. |
![]() |
![]() |
![]() |
Bookmarks |
|
|