![]() |
|
![]() |
#1 |
Senior Member
![]() Join Date: Apr 2008
Location: Berne IN
Posts: 3,229
|
Re: What did you do today not on your truck...
__________________
71 C10 72 K20 72 K10 Super Kirk |
![]() |
![]() |
![]() |
#2 |
Special Order
![]() ![]() Join Date: Nov 2004
Location: Mt Airy, MD
Posts: 85,859
|
Re: What did you do today not on your truck...
That has been said many times by friends when they became aware of my situation. The odd thing is this guy's father was a preacher and also the carpenter who he learned from. This guy is absolutely lacking in any spiritual connection, certainly not religious. His father has passed on and he says his mother is a whore. He took pleasure in telling of some of his evil exploits. I am so glad to no longer be associated with him
Steeveedee, I'm sure he would have fired Norm
__________________
"BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~ |
![]() |
![]() |
![]() |
#3 | |
Who Changed This?
![]() Join Date: Jan 2013
Location: Simi Valley, CA
Posts: 10,396
|
Re: What did you do today not on your truck...
Quote:
![]()
__________________
~Steven '70 Chevy 3/4T Longhorn CST 402/400/3.56 Custom Camper Simi Valley, CA |
|
![]() |
![]() |
![]() |
#4 |
All about them K’s
![]() Join Date: Jun 2014
Location: Land of Entrapment
Posts: 6,374
|
Re: What did you do today not on your truck...
__________________
Tyler '57 3100 http://67-72chevytrucks.com/vboard/s...d.php?t=813888 '72 K20 Cheyenne http://67-72chevytrucks.com/vboard/s...d.php?t=662879 ‘69 K10 SWB http://67-72chevytrucks.com/vboard/s...d.php?t=805206 '98 Silverado LT K2500HD ECLB Vortec 454/4l80E: 6" lift 315/75/16's ‘87 IROC-Z all original 50K mile survivor TPI 305 IROC Blue ‘10 Camaro 2SS/RS Aqua Blue Metallic #93 -version 2.0 ![]() |
![]() |
![]() |
![]() |
#5 |
Registered User
Join Date: Jun 2012
Location: wind lake WI
Posts: 1,747
|
Re: What did you do today not on your truck...
Amen!
__________________
LIL ERV the 50-3600 396 BBC stroked to 415 cid Richmond 6spd over drive C4 rear Porter built a arms Never give the Devil a ride,because he'll want to Drive! |
![]() |
![]() |
![]() |
#6 |
Who Changed This?
![]() Join Date: Jan 2013
Location: Simi Valley, CA
Posts: 10,396
|
Re: What did you do today not on your truck...
Is Norm still around!?
__________________
~Steven '70 Chevy 3/4T Longhorn CST 402/400/3.56 Custom Camper Simi Valley, CA |
![]() |
![]() |
![]() |
#7 |
Special Order
![]() ![]() Join Date: Nov 2004
Location: Mt Airy, MD
Posts: 85,859
|
Re: What did you do today not on your truck...
This guy's only laugh was at evil. I think he despised me for being happy and friendly to everyone, always having something nice to say in passing. I used to take my guys to lunch every now and then, sometimes turning into an afternoon, then run back to gather up the tools. I wrote it off on my moral account. I worked for him 16 months and never had a beer with him. He knew nothing about my interests or anything outside of the job. Definitely saw his employees as subservient. I'm a down in the trenches with the troops type of leader. Worked well for me, earned me respect. My guys would do anything for me. With this guy I couldn't wait for quitting time and started dreading Monday come Sunday evening. The days he put me on a job by myself were pure heaven. It's pure heaven every day now
![]()
__________________
"BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~ |
![]() |
![]() |
![]() |
#8 |
Registered User
Join Date: Jan 2019
Location: edenton nc
Posts: 76
|
Re: What did you do today not on your truck...
I've inched a board or two in my life. So aggravating looking for the board stretcher.
__________________
1995 k3500 cclb srw 6.5 turbo diesel. The lessons that hurt are the lessons that teach. There is always a price to pay. You are free to make any decision you want. You are not free from the consequences. |
![]() |
![]() |
![]() |
#9 |
laying low
![]() Join Date: Mar 2001
Location: Searcy, Ark. USA
Posts: 13,232
|
Re: What did you do today not on your truck...
The stores were always out!
![]()
__________________
Boog 69 Chevy stepside, 358/T350, 4.11 posi, 4.5/4 drop, rallys, poboy driver primer is finer 91 Chevy sportside, Tahoe, Yukon & GMC Crewcab All GM..'nuff said. I stand for the flag and kneel at the cross |
![]() |
![]() |
![]() |
#10 |
Senior Member
![]() Join Date: Apr 2008
Location: Berne IN
Posts: 3,229
|
Re: What did you do today not on your truck...
I’m impressed you made it 16 months Tim! He probably has something in his past that hardened him
__________________
71 C10 72 K20 72 K10 Super Kirk |
![]() |
![]() |
![]() |
#11 | ||
Special Order
![]() ![]() Join Date: Nov 2004
Location: Mt Airy, MD
Posts: 85,859
|
Re: What did you do today not on your truck...
Quote:
![]() Quote:
This is the most I have ever spilled here about my personal life. I'm not a wear my heart on my sleeve person. We come here to enjoy ourselves. But, I may just break with tradition and start a thread on this. I've actually been holding back a lot. There is so much and hopefully once out I'll let it all fade away. ----------------------------------------------------------------------------------- So... What I've been doing not on my truck is chipping away at details I never finished on my house or things I want to change/improve. I finally ordered and installed a vintage style brass & porcelain toilet handle on the vintage style Kohler toilet I installed about 25 years ago that came with a contemporary looking chrome handle. The bathroom has Douglas fir porch ceiling paneling w/oak trim and brass/porcelain hardware. It all matches now!! While sitting there, yes there, I looked as I have for so long at the gap between the tile and oak threshold. The toilet has overflowed in the past and flooded the floor, which caused the threshold to cup a few times. It always settles flat again, but the grout has cracked out and the caulk I have used has pulled loose, so I cleared that out long ago. From the rip I took off the original oak backsplash cap I ruined for my kitchen (prior post), I made quarter round to trim inside this bath's vanity bottom inside. There was a gap. I made extra and got to playing with it and made up some mini-1/4 round, about 1/4"-5/16". I tried it in that gap at the threshold and it filled it well. So I glued and pin nailed it so it could move with the threshold, in case there is another flood ![]() The base is just oak 1x with an 1/8" bead and old style oak shoe. I also sit there, yes there, and ponder that wide dust collecting and caulked to fill the void due to it's rigid nature 1x. This tiny 1/4 round is like wood caulk, it's so flexible. Today I'm going to make up some more and cap the base with it. Also looking around at other areas around the house that could use it, both clear oak and painted pine
__________________
"BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~ Last edited by special-K; 01-30-2022 at 06:20 AM. |
||
![]() |
![]() |
![]() |
#12 |
R.I.P. E.S.L.L.
![]() ![]() Join Date: Aug 2005
Location: Kernville CA./ Lake Isabella CA.
Posts: 11,419
|
Re: What did you do today not on your truck...
I got the keys to my new swinging bachelor pad today. Okay. I'm not so swinging and mama would have something say about the bachelor thing. But I did get the keys. All done.
![]() Except the moving stuff in part. ![]() It's not the best looking girl at the dance but it's nice inside and right on the river and downtown. Should be fun. Just a weekend place. It's a great location and I'm going to enjoy barbecuing on that deck. And I like the name of street. Whiskey Flat Days and the rodeo are coming up in February and I'm right there. I have no idea who's going to clean up those leaves... Not me. ![]() ![]() No clue about the vacant lot next door with the crappy fence. But it gives me more distance from neighbors. ![]()
__________________
1971 Custom C/20 ![]() 1970 CST 20 1970 C/30 Flatbed 1983 C/30 Dually 2015 Corvette Z51 2021 Corvette Z51 1991 Cadillac Hearse 1982 Cadillac Eldorado Biarritz 2000 Porsche Boxster S 2020 Jeep Gladiator 1973 VW Thing 1973 Plymouth Satellite wagon 1963 Baja Bug 1959 Bug Dune Buggy 1970 Baja Bug 1987 Jaguar XJ 350. R.I.P. El Jay R.I.P Jessie. R.I.P Grumpy. Every day is a gift from God. |
![]() |
![]() |
![]() |
#13 |
Senior Member
![]() Join Date: Jan 2007
Location: Turlock, CA
Posts: 8,656
|
Re: What did you do today not on your truck...
Last year I was at an estate sale looking for old chevy truck parts. I found this old church pew. Turns out my wife wanted one to restore (aka she wanted me to restore it haha). Well I finished it today.
Plenty of sanding and filler, two coats of black primer, 3 coats of red, some careful sanding for a "patina" look, and one coat of clear satin. She is happy... ![]()
__________________
Please help my sister in law with her battle with cancer https://gofund.me/902f6fce Project "C10 Fever" (68 factory black 396 swb) Project "Little Sister" (70 c10 blue original paint refresh) Project "Blue Bomb" (70 c30 blue original paint refresh) SOLD Project "Vitamin C" (71 c10 orange original paint refresh) SOLD |
![]() |
![]() |
![]() |
#14 | ||
Special Order
![]() ![]() Join Date: Nov 2004
Location: Mt Airy, MD
Posts: 85,859
|
Re: What did you do today not on your truck...
Quote:
![]() So you can see the river from the deck? The street name is great. You need to come up with a name for the place using that (so you can stop calling it the bachelor pad and all). There is an old country road near here called Whiskey Springs Rd. Been on it end to end but can't seem to find that spring! Don't worry about those leaves. In time you'll either flick a butt or a spark from the BBQ will take care of that. I predict you will have that same gathering of leaves in that same spot every year. With all your free time, go to the county's tax assessor's office to see who owns that lot. Could be held by county commissioners due to non-payment of property tax. If so, it could be had for the amount of back taxes. Could be for one reason or another it's tied up in a title dispute, and you could file a first right to refusal to be first in line once that gets settled Quote:
![]() That came out excellently. Sanding was the fun part, right? The question is "Are you happy?". Uh, well... No you're right ![]() I made up a batch of that mini-1/4 round yesterday. I about froze my fingers out there! It was a clear blue sunny, maybe up to, mid-20s day but the table saw created a wind chill and Jack Frost wormed his way through my gloves. Had to come in by the woodstove for a thaw break! Then I decided to do another project I thought up. I had this piece of slab wood from out of my former boss's old bank barn. The hay floor was made up of old wide live-edge slab cuts laid down loose, lapping over one another. He had me take it up and lay back down in a single layer so it can be covered with plywood. This meant cutting the ends off of some. I stuck those pieces in my truck rather than toss out. The project is make a small coffee table type thing, something minimal to take less space. I'm calling it a coffee stool. I always used a cobbler's bench, but it had to be set away from the couch for leg room, which meant walking around it in my small house. My son scooted it across the room to set his big Playstation monitor on, which works well. That's what we watch DVDs on. This table is about the size of a stool so it can set against the couch next to where I/we sit. Just something to set your drink on. I think it will be nicer than the Ryobi box The rest of it is made out of that oak 2" x 4" I started cutting on for part of the countertop extension I made last week Beautiful wood inside that thing! Not exactly a table yet I plan to put it together today
__________________
"BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~ |
||
![]() |
![]() |
![]() |
#15 |
laying low
![]() Join Date: Mar 2001
Location: Searcy, Ark. USA
Posts: 13,232
|
Re: What did you do today not on your truck...
I envy you guys with your wood projects. As a youngun I figured I'd grow up doing stuff with wood since my grandad was a carpenter by trade and I liked making stuff in high school wood shop. But my love of automobiles was stronger and drew my attention away from wood working. Oh, I've done my share of fixit wood work, [mostly necessary repair work] but not many wood projects for pure enjoyment. So I thought I might finally get into it in retirement but I don't have the room for it and with the aches and pains I don't feel like doing it either.
I can't drive a piece of furniture but I can drive my truck and eat in it when I want. ![]()
__________________
Boog 69 Chevy stepside, 358/T350, 4.11 posi, 4.5/4 drop, rallys, poboy driver primer is finer 91 Chevy sportside, Tahoe, Yukon & GMC Crewcab All GM..'nuff said. I stand for the flag and kneel at the cross |
![]() |
![]() |
![]() |
#16 |
Registered User
Join Date: Jul 2018
Location: Catskill Mountains,NY
Posts: 8,476
|
Re: What did you do today not on your truck...
Just waiting on the faucet to make the final placement of the sink . I took some god awfull bright solid brass hardware and made the old .
__________________
Mark 72 c20 custom camper Husky edition, 66 SS396 Chevelle 1964 Hawk, 63 Avanti,62 lark 1969 AMX , 1968 c20 stepside ,85 K20 1977 Suburban sold 68 anniversary. |
![]() |
![]() |
![]() |
#17 | |
Registered User
Join Date: Jul 2018
Location: Catskill Mountains,NY
Posts: 8,476
|
Re: What did you do today not on your truck...
Quote:
__________________
Mark 72 c20 custom camper Husky edition, 66 SS396 Chevelle 1964 Hawk, 63 Avanti,62 lark 1969 AMX , 1968 c20 stepside ,85 K20 1977 Suburban sold 68 anniversary. |
|
![]() |
![]() |
![]() |
#18 | ||
Special Order
![]() ![]() Join Date: Nov 2004
Location: Mt Airy, MD
Posts: 85,859
|
Re: What did you do today not on your truck...
Quote:
![]() What did you do, Mark, use acid?. I used the stamped brass plated hinges of the same style in my upstairs bath cabinetry about 35 years ago. I think it was 18 total. One of my kids had a tantrum and damaged a door and hinges. I could only find the ones like you used. BTW, the bathroom actually was added in what was a bedroom later since originally the place had an outhouse. So I did it in an early 1900s style. It's all painted porch ceiling paneling with carpenter built-ins. so the hinges are painted over since after all those years they probably would have been. Anyway, I had to try to make the solid hinge not stand out from the stamped. I mean, repairs are ok for the vibe I go with, but I wanted it to look like an old repair. ground all the edges some, installed them, and slathered caulk around the edges to mold them in. I wanted to look painted under for years. I guess it worked out well. Here's what's funny. This year I've been digging out my cellar. On break since before Christmas. But I had to move things out. There was a good sized plastic bag and in it were the wood knobs I originally used and a good many pair of the stamped brass plated hinges from 35 years ago!. I think I did that repair about 10 years ago! Oh well. I have extra hinges. Quote:
Great wood used to grow on trees. Or rather, it used to be THE trees! I hang onto all that stuff. Those coffee stool legs were from my ex-bosses barn, loose. They were sixteen footers, all twisted up. He had me cut them up and put on the burn pile. They went into my truck! My Fein multi-master needed a repair and I picked it up Friday. I was waiting for that to take care of a thing in my kitchen that has bothered me for about 30 years. I painted the kitchen a couple years ago and never put the switch plates on these two spots because I really wanted to fix that mess. I hired an electrician to wire the kitchen and this is how he did the receptacle and switch. Not only two separate boxes about next to each other, but not even close to being aligned. Also, by the fridge, he pit the switch behind the receptacle. I swapped those around. I guess he didn't know what to do since it wasn't drywall? Probably it's because he sucked! ![]() Before: After: I'll paint in the morning. And I have oak cover plates to match the receptacle plates in there
__________________
"BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~ Last edited by special-K; 01-30-2022 at 09:01 PM. |
||
![]() |
![]() |
![]() |
#19 |
Who Changed This?
![]() Join Date: Jan 2013
Location: Simi Valley, CA
Posts: 10,396
|
Re: What did you do today not on your truck...
Nice patination on the hinges, Mark!
I'm working on carving the family coat of arms at half scale, in high relief. I'm hacking away and am close to the finish/burn decision. Some project wood comes from the burn pile, some project wood ends up in the burn pile. ![]()
__________________
~Steven '70 Chevy 3/4T Longhorn CST 402/400/3.56 Custom Camper Simi Valley, CA |
![]() |
![]() |
![]() |
#20 |
Registered User
Join Date: Jul 2018
Location: Catskill Mountains,NY
Posts: 8,476
|
Re: What did you do today not on your truck...
Just scuffed then little flat black . Sanded off the high spots and edges then a few coats of clear
__________________
Mark 72 c20 custom camper Husky edition, 66 SS396 Chevelle 1964 Hawk, 63 Avanti,62 lark 1969 AMX , 1968 c20 stepside ,85 K20 1977 Suburban sold 68 anniversary. |
![]() |
![]() |
![]() |
#21 |
R.I.P. E.S.L.L.
![]() ![]() Join Date: Aug 2005
Location: Kernville CA./ Lake Isabella CA.
Posts: 11,419
|
Re: What did you do today not on your truck...
Those hinges look a million times better Mark.
Sometimes shiny isn't better. Just ask a bald guy.
__________________
1971 Custom C/20 ![]() 1970 CST 20 1970 C/30 Flatbed 1983 C/30 Dually 2015 Corvette Z51 2021 Corvette Z51 1991 Cadillac Hearse 1982 Cadillac Eldorado Biarritz 2000 Porsche Boxster S 2020 Jeep Gladiator 1973 VW Thing 1973 Plymouth Satellite wagon 1963 Baja Bug 1959 Bug Dune Buggy 1970 Baja Bug 1987 Jaguar XJ 350. R.I.P. El Jay R.I.P Jessie. R.I.P Grumpy. Every day is a gift from God. |
![]() |
![]() |
![]() |
#22 |
Senior Member
![]() Join Date: Aug 2011
Location: Reno, Nv.
Posts: 1,433
|
Re: What did you do today not on your truck...
Didn't get anything done, had to take a conx to Milbank, South Dakota. Left Wednesday and got home today. Long week.
__________________
1927 Willy's Knight 24,000 original miles, 1958 Impala 283/Powerglide, 1964 C-30 383/4 speed, 1971 Monte Carlo 350/350, 1972 GMC K2500 350/350, 1976 Chev. K10 350/350, 2006 GMC Sierra 2500HD LBZ Duramax/Allison, 2006 Chev. Silverado K3500 LBZ Duramax/Allison |
![]() |
![]() |
![]() |
#23 |
Registered User
Join Date: Jul 2018
Location: Catskill Mountains,NY
Posts: 8,476
|
Re: What did you do today not on your truck...
Yesterday went to get some slabs that have been in the rafters according to my neighbor since he has been here early 70s so they may be even older . Thought they were pine but they are way to heavy for pine and to get down with two people . My plan was to use the steel girder beam that runs from front to back along the ridge beam and a block and tackle. No dice need more people so they can wait till spring but I did find laying on top of them and old block and tackle . This used to be a working hay farm . That’s why my barn has open seams on the side boards to let air move through the barn . Looks to be hand forged steel with wood rollers
__________________
Mark 72 c20 custom camper Husky edition, 66 SS396 Chevelle 1964 Hawk, 63 Avanti,62 lark 1969 AMX , 1968 c20 stepside ,85 K20 1977 Suburban sold 68 anniversary. |
![]() |
![]() |
![]() |
#24 |
laying low
![]() Join Date: Mar 2001
Location: Searcy, Ark. USA
Posts: 13,232
|
Re: What did you do today not on your truck...
turn
__________________
Boog 69 Chevy stepside, 358/T350, 4.11 posi, 4.5/4 drop, rallys, poboy driver primer is finer 91 Chevy sportside, Tahoe, Yukon & GMC Crewcab All GM..'nuff said. I stand for the flag and kneel at the cross |
![]() |
![]() |
![]() |
#25 |
Special Order
![]() ![]() Join Date: Nov 2004
Location: Mt Airy, MD
Posts: 85,859
|
Re: What did you do today not on your truck...
Nice find. FREEBIE!! I have one I grabbed out of some barn somewhere. I wanted to mount it under the peak lookout on the front of my mini-barn, but this will go to my next place!
I got the two walls painted yesterday and the switch plates that match the rest of the kitchen installed.
__________________
"BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~ |
![]() |
![]() |
![]() |
Bookmarks |
|
|