What did you do with your truck today, Part 3 - Page 75 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

mosel70 · 09-18-2018, 09:41 AM

After 8 months of sanding, sent ‘70 stepside to the painter. Paint done, today is buff n polish day. Can’t wait to get her back in my own garage for reassembly.
The whole paint process began due to wanting to replace the tailgate that had a dent in it from my son-in-law when transporting it from Ft Worth to home in Las Vegas two years ago. Great kid though. He took my old tailgate and made a bench out of it for my birthday last month.
Posted via Mobile Device

MARTINSR · 09-18-2018, 09:43 AM

Right on!

Brian

mosel70 · 09-18-2018, 10:23 AM

Forgot to add pic of first polished panel.
Posted via Mobile Device

Black_Sheep · 09-18-2018, 02:29 PM

Looking good...

MARTINSR · 09-18-2018, 02:47 PM

I love the art made from car parts like that bench, very cool.

Brian

Black_Sheep · 09-18-2018, 10:12 PM

Quote:

Originally Posted by MARTINSR

I love the art made from car parts like that bench, very cool.

Brian

When the truck is done I'm going to make a garage bar with my old tailgate. Stay tuned.

Tonight I'm working on the interior. If I could carry the bench up from the basement by myself, it would be in too...

**oldman3** · 09-18-2018, 11:30 PM

Mark, interior is looking suuuuuper...Jim

MARTINSR · 09-18-2018, 11:52 PM

I got the inner hood brace cut up and working. It took a little recess in the cowl right at the fender as It thought it would a few days ago so all is good. I am pleased with it. I also painted a few parts for under the dash.

Brian

MiraclePieCo · 09-19-2018, 12:20 AM

Going back together after the sender plug fiasco. To save my back, I lowered the head down onto the engine with a cherry picker. Although it's difficult working on the engine in the truck, I'd much rather do that than take the front sheet metal off.

Dyslexic Dog · 09-19-2018, 09:44 PM

What I have been doing is building a garage with a lift to rebuild a 59 Apache. I brought the truck to the garage today. Lots of work to do. .......

cid:165f4a06681af1f11a81

Dyslexic Dog · 09-19-2018, 09:49 PM

Quote:

Originally Posted by Dyslexic Dog

What I have been doing is building a garage with a lift to rebuild a 59 Apache. I brought the truck to the garage today. Lots of work to do. .......

cid:165f4a06681af1f11a81

Ah, i suck at computers. No pic, but my garage is covered and sealed, not sided. The truck is inside and at home. Thanks to all for all of the info on where I should go with the build. I just wanted to start at the beginning and go from there on this thread. This is what I did on my truck today.

Black_Sheep · 09-19-2018, 10:05 PM

Things are happening again tonight...

mikebte · 09-19-2018, 10:27 PM

Quote:

Originally Posted by Black_Sheep

Things are happening again tonight...

That looks like an absolute show piece

**oldman3** · 09-19-2018, 10:56 PM

Very nice...Jim

DransportGarage · 09-19-2018, 10:59 PM

Quote:

Originally Posted by Dyslexic Dog

Ah, i suck at computers. No pic, but my garage is covered and sealed, not sided. The truck is inside and at home. Thanks to all for all of the info on where I should go with the build. I just wanted to start at the beginning and go from there on this thread. This is what I did on my truck today.

Once your garage is complete enough to start on the truck you might consider starting a build thread. That way all of your stuff is in one place, and you can still make entries here whenever you feel like it. Good luck with both projects!

Dyslexic Dog · 09-19-2018, 11:00 PM

Quote:

Originally Posted by DransportGarage

Once your garage is complete enough to start on the truck you might consider starting a build thread. That way all of your stuff is in one place, and you can still make entries here whenever you feel like it. Good luck with both projects!

Thanks

MARTINSR · 09-20-2018, 12:25 AM

I worked on the rad support tonight. Removed the brace on the side that had been cut up and removed the good one off my one out of the front clip. I always have to think of guy who welded those spot welds when I remove one. The man was feeding his family doing those welds.

I also have to think how far we have came in this stuff when years ago I would have been cutting a piece of metal and welding it on that brace to repair it instead of simply drilling the spot welds out "unbolting" it and doing the same on the donor and welding it back on just like it was never touched, cool.

I also cleaned up some hack work that was done to the replacement rad support, drilled out the rusted and broken off bolt and drilled it out, and ran a tap through the hole so it's ready to go. Chased the threads with the tap in all the other nuts too.

I also straightened the metal support rods so they look good. I am thinking I am going to weld the upper tie bar on like it was from the factory. I was planning on bolting it, but now I am thinking I will weld it on like it was from the factory, done deal. Once I get this thing finished I can just have it powder coated.

Brian

MiraclePieCo · 09-20-2018, 12:54 AM

Re-installed the intake manifold, distributor, spark plugs, adjusted valves and installed the covers. Another day or two and I may have this thing back to square one.

mikebte · 09-20-2018, 08:12 AM

Quote:

Originally Posted by MiraclePieCo

Re-installed the intake manifold, distributor, spark plugs, adjusted valves and installed the covers. Another day or two and I may have this thing back to square one.

Your doing good, way better than what you first anticipated

MARTINSR · 09-20-2018, 10:09 AM

Quote:

Originally Posted by MiraclePieCo

Re-installed the intake manifold, distributor, spark plugs, adjusted valves and installed the covers. Another day or two and I may have this thing back to square one.

There you go!

Brian

Black_Sheep · 09-20-2018, 08:43 PM

I know it doesn't look like much but all of the front end hardware is tight, the front splash apron is on and the headlamps are in. I need to find the headlight bezel screws, they are around here somewhere...

mikebte · 09-20-2018, 10:11 PM

Tested operations, pulled it out of the garage (under its own power) and got pulled back in front ways. Now that it is away from the wall and I can walk around the truck, I can maybe get stuff done. As you can see, it has been backed in for years and my bike was over the bed.
Secondly I would like to add the CPP power disc brakes and power steering worked awesome.

MiraclePieCo · 09-21-2018, 12:36 AM

Quote:

Originally Posted by mikebte

Your doing good, way better than what you first anticipated

I've been neglecting everything else to get it done, but had to take today off because my back can't take all those hours bent over the fenders.

MiraclePieCo · 09-21-2018, 12:39 AM

Quote:

Originally Posted by mikebte

Tested operations, pulled it out of the garage (under its own power) and got pulled back in front ways. Now that it is away from the wall and I can walk around the truck, I can maybe get stuff done. As you can see, it has been backed in for years and my bike was over the bed.
Secondly I would like to add the CPP power disc brakes and power steering worked awesome.

That's great, what a milestone!

Quote:

Originally Posted by Black_Sheep

I need to find the headlight bezel screws, they are around here somewhere...

If you're like me, you'll find them immediately AFTER you go buy another set.

MARTINSR · 09-21-2018, 12:45 AM

I got out there and cut some stuff off the old rad support to use to patch the replacement one (you know it's right then.

) and I got that welded on to the replacement, it's got weld thru primer applied and ready to finish up tomorrow.

Brian

09-18-2018, 09:41 AM	#1851
mosel70 Registered User Join Date: Jul 2016 Location: Las Vegas, NV Posts: 116	After 8 months of sanding, sent ‘70 stepside to the painter. Paint done, today is buff n polish day. Can’t wait to get her back in my own garage for reassembly. The whole paint process began due to wanting to replace the tailgate that had a dent in it from my son-in-law when transporting it from Ft Worth to home in Las Vegas two years ago. Great kid though. He took my old tailgate and made a bench out of it for my birthday last month. Posted via Mobile Device Attached Images

09-18-2018, 09:43 AM	#1852
MARTINSR Registered User Join Date: Dec 2000 Location: Boise, Idaho Posts: 6,003	Re: What did you do with your truck today, Part 3 Right on! Brian __________________ 1948 Chevy pickup Chopped, Sectioned, 1953 Corvette 235 powered. Once was even 401 Buick mid engined with the carburetor right between the seats! Bought with paper route money in 1973 when I was 15. "Fan of most anything that moves human beings"

09-18-2018, 10:23 AM	#1853
mosel70 Registered User Join Date: Jul 2016 Location: Las Vegas, NV Posts: 116	Forgot to add pic of first polished panel. Posted via Mobile Device Attached Images

09-18-2018, 02:29 PM	#1854
Black_Sheep Registered User Join Date: Jun 2017 Location: upper midwest Posts: 1,129	Re: What did you do with your truck today, Part 3 Looking good... __________________ Mark Brother's keeper - '58 Stepside build

09-18-2018, 02:47 PM	#1855
MARTINSR Registered User Join Date: Dec 2000 Location: Boise, Idaho Posts: 6,003	Re: What did you do with your truck today, Part 3 I love the art made from car parts like that bench, very cool. Brian __________________ 1948 Chevy pickup Chopped, Sectioned, 1953 Corvette 235 powered. Once was even 401 Buick mid engined with the carburetor right between the seats! Bought with paper route money in 1973 when I was 15. "Fan of most anything that moves human beings"

09-18-2018, 11:30 PM	#1857
oldman3 Senior Member Join Date: Mar 2011 Location: West Plains, Missouri Posts: 7,559	Re: What did you do with your truck today, Part 3 Mark, interior is looking suuuuuper...Jim __________________ my build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=459839 Jimbo's long bed step build:http://67-72chevytrucks.com/vboard/s...t=464626<br />

09-18-2018, 11:52 PM	#1858
MARTINSR Registered User Join Date: Dec 2000 Location: Boise, Idaho Posts: 6,003	Re: What did you do with your truck today, Part 3 I got the inner hood brace cut up and working. It took a little recess in the cowl right at the fender as It thought it would a few days ago so all is good. I am pleased with it. I also painted a few parts for under the dash. Brian Attached Images __________________ 1948 Chevy pickup Chopped, Sectioned, 1953 Corvette 235 powered. Once was even 401 Buick mid engined with the carburetor right between the seats! Bought with paper route money in 1973 when I was 15. "Fan of most anything that moves human beings"

09-19-2018, 12:20 AM	#1859
MiraclePieCo Registered User Join Date: Sep 2014 Location: USA Posts: 2,249	Re: What did you do with your truck today, Part 3 Going back together after the sender plug fiasco. To save my back, I lowered the head down onto the engine with a cherry picker. Although it's difficult working on the engine in the truck, I'd much rather do that than take the front sheet metal off. Attached Images __________________ 1951 Chevy Panel Truck

09-19-2018, 09:44 PM	#1860
Dyslexic Dog Registered User Join Date: Jul 2018 Location: GR MI Posts: 57	Re: What did you do with your truck today, Part 3 What I have been doing is building a garage with a lift to rebuild a 59 Apache. I brought the truck to the garage today. Lots of work to do. ....... cid:165f4a06681af1f11a81

09-19-2018, 10:05 PM	#1862
Black_Sheep Registered User Join Date: Jun 2017 Location: upper midwest Posts: 1,129	Re: What did you do with your truck today, Part 3 Things are happening again tonight... Attached Images __________________ Mark Brother's keeper - '58 Stepside build

09-19-2018, 10:56 PM	#1864
oldman3 Senior Member Join Date: Mar 2011 Location: West Plains, Missouri Posts: 7,559	Re: What did you do with your truck today, Part 3 Very nice...Jim __________________ my build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=459839 Jimbo's long bed step build:http://67-72chevytrucks.com/vboard/s...t=464626<br />

09-20-2018, 12:25 AM	#1867
MARTINSR Registered User Join Date: Dec 2000 Location: Boise, Idaho Posts: 6,003	Re: What did you do with your truck today, Part 3 I worked on the rad support tonight. Removed the brace on the side that had been cut up and removed the good one off my one out of the front clip. I always have to think of guy who welded those spot welds when I remove one. The man was feeding his family doing those welds. I also have to think how far we have came in this stuff when years ago I would have been cutting a piece of metal and welding it on that brace to repair it instead of simply drilling the spot welds out "unbolting" it and doing the same on the donor and welding it back on just like it was never touched, cool. I also cleaned up some hack work that was done to the replacement rad support, drilled out the rusted and broken off bolt and drilled it out, and ran a tap through the hole so it's ready to go. Chased the threads with the tap in all the other nuts too. I also straightened the metal support rods so they look good. I am thinking I am going to weld the upper tie bar on like it was from the factory. I was planning on bolting it, but now I am thinking I will weld it on like it was from the factory, done deal. Once I get this thing finished I can just have it powder coated. Brian Attached Images __________________ 1948 Chevy pickup Chopped, Sectioned, 1953 Corvette 235 powered. Once was even 401 Buick mid engined with the carburetor right between the seats! Bought with paper route money in 1973 when I was 15. "Fan of most anything that moves human beings"

09-20-2018, 12:54 AM	#1868
MiraclePieCo Registered User Join Date: Sep 2014 Location: USA Posts: 2,249	Re: What did you do with your truck today, Part 3 Re-installed the intake manifold, distributor, spark plugs, adjusted valves and installed the covers. Another day or two and I may have this thing back to square one. Attached Images __________________ 1951 Chevy Panel Truck

09-20-2018, 08:43 PM	#1871
Black_Sheep Registered User Join Date: Jun 2017 Location: upper midwest Posts: 1,129	Re: What did you do with your truck today, Part 3 I know it doesn't look like much but all of the front end hardware is tight, the front splash apron is on and the headlamps are in. I need to find the headlight bezel screws, they are around here somewhere... Attached Images __________________ Mark Brother's keeper - '58 Stepside build

09-20-2018, 10:11 PM	#1872
mikebte Registered User Join Date: Oct 2011 Location: Tucson, AZ Posts: 639	Re: What did you do with your truck today, Part 3 Tested operations, pulled it out of the garage (under its own power) and got pulled back in front ways. Now that it is away from the wall and I can walk around the truck, I can maybe get stuff done. As you can see, it has been backed in for years and my bike was over the bed. Secondly I would like to add the CPP power disc brakes and power steering worked awesome. Attached Images __________________ 1959 Chevy Apache 3100/ 283 TBI / 4L60E My YouTube: https://www.youtube.com/mikebtte Last edited by mikebte; 09-21-2018 at 12:34 AM.



Register or Log In To remove these advertisements.

09-21-2018, 12:45 AM	#1875
MARTINSR Registered User Join Date: Dec 2000 Location: Boise, Idaho Posts: 6,003	Re: What did you do with your truck today, Part 3 I got out there and cut some stuff off the old rad support to use to patch the replacement one (you know it's right then. ) and I got that welded on to the replacement, it's got weld thru primer applied and ready to finish up tomorrow. Brian Attached Images __________________ 1948 Chevy pickup Chopped, Sectioned, 1953 Corvette 235 powered. Once was even 401 Buick mid engined with the carburetor right between the seats! Bought with paper route money in 1973 when I was 15. "Fan of most anything that moves human beings"

Register or Log In To remove these advertisements.