1969 SuperBurb build-up (Bagged and Blown!) - Page 75 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Advanced Design** · 04-10-2018, 06:58 PM

Those were great pics Rob. Congrat’s to your daughter!

likaroc13 · 04-10-2018, 10:35 PM

Burb continues to keep looking better, & big congrats to your daughter! I know ya'll are super proud. Don't know that I've ever seen a pic of you, but I must say you're lookin' sharp in that uniform.

**Palf70Step** · 04-11-2018, 07:36 AM

Congrats to your daughter Rob.

**Hart_Rod** · 04-11-2018, 07:58 AM

Quote:

Originally Posted by Dieselwrencher

Congrats to your daughter and the burb is coming along nicely. I really like the ac control head.

Thanks!

Quote:

Originally Posted by Burb

Bravo Zulu

Rob

Thanks!

Quote:

Originally Posted by Advanced Design

Those were great pics Rob. Congrat’s to your daughter!

Thanks!

Quote:

Originally Posted by Palf70Step

Congrats to your daughter Rob.

Thanks!

Quote:

Originally Posted by likaroc13

Burb continues to keep looking better, & big congrats to your daughter! I know ya'll are super proud. Don't know that I've ever seen a pic of you, but I must say you're lookin' sharp in that uniform.

Thanks! We are really excited for her. She got based at LaGuardia because she wants to fly internationally. As far as the uniform, it's been almost 10 years since I had it on. Was really surprised it fit as well as it did,

.

**Hart_Rod** · 04-16-2018, 09:19 AM

I have the passenger side speaker installed. What a pain! Stretching the carpet was a JOB!!! Will work on the driver side this evening.

Bennett68C10 · 04-16-2018, 10:34 AM

Very nice

**Hart_Rod** · 04-16-2018, 10:46 AM

Quote:

Originally Posted by Bennett68C10

Very nice

Thanks Keith

**Advanced Design** · 04-16-2018, 02:38 PM

Looks good! How did you get the carpet into that form? Is it two pieces?

nastety92 · 04-16-2018, 02:50 PM

Front speakers look good. Which kick panels are those and what else did you have to do to them?

**Hart_Rod** · 04-16-2018, 03:46 PM

Quote:

Originally Posted by Advanced Design

Looks good! How did you get the carpet into that form? Is it two pieces?

It's one piece. A lot of pulling and stretching (along with a little heat,

)...

Quote:

Originally Posted by nastety92

Front speakers look good. Which kick panels are those and what else did you have to do to them?

They are from RetroSound. Didn't do much to them other than a little trimming and adding a 1" spacer (I used deep speakers).

**Hart_Rod** · 04-23-2018, 08:43 AM

Drivers side is done. Just need to do some tidying up and put everything back together.

**HO455** · 04-24-2018, 12:50 PM

Those kick panels came out really nice. What kind of adhesive did you use?

**Hart_Rod** · 04-24-2018, 01:19 PM

Quote:

Originally Posted by HO455

Those kick panels came out really nice. What kind of adhesive did you use?

Thanks, 3M carpet/headliner adhesive - picked it up at the local parts store.

**Hart_Rod** · 04-26-2018, 04:22 PM

All the sound system install is taken care of. I am currently working on putting everything back together. This has taken longer than it should have because I've taken the time to clean up some of the wiring that I had previously done in a not so clean manner,

. I also installed an electric trailer brake controller and test fitted my hidden hitch receiver,

.

Rob

**Hart_Rod** · 04-30-2018, 08:44 AM

I go the all the stereo installed and interior back together, so I decided to take the Burb out for a ride and snapped some pictures.

5150 · 04-30-2018, 09:20 AM

Will I see you this Saturday?

**Hart_Rod** · 04-30-2018, 10:50 AM

Quote:

Originally Posted by 5150

Will I see you this Saturday?

Unfortunately not...

5150 · 04-30-2018, 10:52 AM

Quote:

Originally Posted by Hart_Rod

Unfortunately not...

Unacceptable

**Hart_Rod** · 04-30-2018, 11:16 AM

:

Quote:

Originally Posted by 5150

Unacceptable

, family commitments come first!

likaroc13 · 04-30-2018, 10:21 PM

Quote:

Originally Posted by Hart_Rod

I go the all the stereo installed and interior back together, so I decided to take the Burb out for a ride and snapped some pictures.

Looks awesome!

kikkegek · 05-01-2018, 04:28 AM

man your suburban is looking amazing. thanks for sharing those awesome photos

Bennett68C10 · 05-01-2018, 07:40 AM

Beautiful! Nice job on the stereo install too.

WannaBe68 · 05-01-2018, 12:19 PM

For an Aviator you sure built one hell of a fine ground-pounder!
Outstanding!

Travisarmenta · 05-01-2018, 03:25 PM

Great looking Burb.

What bracket did you use for the middle buckets? I tried to find a good picture but no joy.

Thanks.

WannaBe68 · 05-01-2018, 10:48 PM

Sorry for the bounce back - but I have a quick question on something you posted in another thread regarding the ceiling bows.
"UPDATE: I have all my panels cut and installed. The fit is good and the satin white is similar to the factory original. I have been trying to find some nice plastic headliner bows, but that is starting to seem like an impossible task. So I got in contact with a company about manufacturing some new ones. I sent them a couple of pieces to use as samples. I think this will probably happen. They won't be chrome like the originals, but they will be paintable. In the meantime, I took the 3 nicest bows that I have and color matched them to the headliner material. This will have to do for right now."

Did you ever get those custom made bows?

04-10-2018, 06:58 PM	#1851
Advanced Design Senior Member Join Date: Jul 2012 Location: Oblong, Illinois Posts: 7,028	Re: 1969 SuperBurb build-up (Bagged and Blown!) Those were great pics Rob. Congrat’s to your daughter! __________________ Doug Advanced Design’s 1977 Blazer Build Advanced Design's '48 'Burb Build Mrs Advanced Design's '72 Suburban Advanced Design's 56 BelAir LS swap

04-10-2018, 10:35 PM	#1852
likaroc13 Rollin' Old Skool Join Date: Jun 2007 Location: Hattiesburg, MS Posts: 5,371	Re: 1969 SuperBurb build-up (Bagged and Blown!) Burb continues to keep looking better, & big congrats to your daughter! I know ya'll are super proud. Don't know that I've ever seen a pic of you, but I must say you're lookin' sharp in that uniform. __________________ _____________________________________________ Phillip My Build threads: 1966 Chevy C-10 "Black Betty" shortbed, fleetside, BBW, 327 V8/ Powerglide (under construction) http://67-72chevytrucks.com/vboard/s...ighlight=betty 1997 Chevy Tahoe, 2dr/2wd, mild custom (Daily driver) http://67-72chevytrucks.com/vboard/s...d.php?t=601142 Pics: '66 C-10 https://flic.kr/s/aHsjHWD4h9 '97 Tahoe https://flic.kr/s/aHsjGZ7wKP '93 C-1500 https://flic.kr/s/aHskxdpdnQ '88 S-10 Blazer https://flic.kr/s/aHsjYGx4Md Previous Rides: 1993 Chevy S-10 ext. cab, 4.3L, 4/5 drop (Sold) 1993 Chevy C-1500 short/step Retro-Rod (Sold) 1988 S-10 Blazer 2dr/2wd mild custom (Sold)

04-11-2018, 07:36 AM	#1853
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 47,061	Re: 1969 SuperBurb build-up (Bagged and Blown!) Congrats to your daughter Rob. __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!

04-16-2018, 09:19 AM	#1855
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,856	Re: 1969 SuperBurb build-up (Bagged and Blown!) I have the passenger side speaker installed. What a pain! Stretching the carpet was a JOB!!! Will work on the driver side this evening. Attached Images __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3

04-16-2018, 10:34 AM	#1856
Bennett68C10 Registered User Join Date: Dec 2006 Location: Toms River, NJ Posts: 5,518	Re: 1969 SuperBurb build-up (Bagged and Blown!) Very nice __________________ Keith 66 Suburban Burb Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=751361 IG: bennett68c10

04-16-2018, 02:38 PM	#1858
Advanced Design Senior Member Join Date: Jul 2012 Location: Oblong, Illinois Posts: 7,028	Re: 1969 SuperBurb build-up (Bagged and Blown!) Looks good! How did you get the carpet into that form? Is it two pieces? __________________ Doug Advanced Design’s 1977 Blazer Build Advanced Design's '48 'Burb Build Mrs Advanced Design's '72 Suburban Advanced Design's 56 BelAir LS swap

04-16-2018, 02:50 PM	#1859
nastety92 Registered User Join Date: Jun 2016 Location: Rockland, MA Posts: 367	Re: 1969 SuperBurb build-up (Bagged and Blown!) Front speakers look good. Which kick panels are those and what else did you have to do to them?

04-23-2018, 08:43 AM	#1861
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,856	Re: 1969 SuperBurb build-up (Bagged and Blown!) Drivers side is done. Just need to do some tidying up and put everything back together. Attached Images __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3

04-24-2018, 12:50 PM	#1862
HO455 Post Whore Join Date: Feb 2016 Location: Portland Oregon Posts: 11,268	Re: 1969 SuperBurb build-up (Bagged and Blown!) Those kick panels came out really nice. What kind of adhesive did you use? __________________ Thanks to Bob and Jeanie and everyone else at Superior Performance for all their great help. RIP Bob Parks. 1967 Burban (the WMB),1988 S10 Blazer (the Stink10 II),1969 GTO (the Goat), 1970 Javelin, 1952 F2 Ford OHC six 4X4, 29 Model A, 72 Firebird (the DBP Bird). 85 Alfa Romeo If it breaks I didn't want it in the first place The WMB repair thread http://67-72chevytrucks.com/vboard/s...d.php?t=698377

04-26-2018, 04:22 PM	#1864
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,856	Re: 1969 SuperBurb build-up (Bagged and Blown!) All the sound system install is taken care of. I am currently working on putting everything back together. This has taken longer than it should have because I've taken the time to clean up some of the wiring that I had previously done in a not so clean manner, . I also installed an electric trailer brake controller and test fitted my hidden hitch receiver, . Rob Attached Images __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3

04-30-2018, 08:44 AM	#1865
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,856	Re: 1969 SuperBurb build-up (Bagged and Blown!) I go the all the stereo installed and interior back together, so I decided to take the Burb out for a ride and snapped some pictures. Attached Images __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3

04-30-2018, 09:20 AM	#1866
5150 C10 Club Tennessee Join Date: Mar 2003 Location: White House, TN 37188 Posts: 8,281	Re: 1969 SuperBurb build-up (Bagged and Blown!) Will I see you this Saturday? __________________ Bryan www.gmtruckshow.com Project "Andes"-Halen's First Truck Project: Patina Burb for he is God’s servant for your good. But if you do wrong, be afraid, for he does not bear the sword in vain. For he is the servant of God, an avenger who carries out God’s wrath on the wrongdoer. Romans 13:4

05-01-2018, 04:28 AM	#1871
kikkegek Registered User Join Date: Aug 2010 Location: Netherlands, The Hague Posts: 1,518	Re: 1969 SuperBurb build-up (Bagged and Blown!) man your suburban is looking amazing. thanks for sharing those awesome photos __________________ My dreamride / project:1977 GMC C15 Suburban In storage: Monster - 1974 GMC Suburban 25hundred Sold : Chevrolet Suburban K20 Silverado 1986 Guide: real HID projectors for 4x6 headlights link: DIY LED TAILLIGHTS

05-01-2018, 07:40 AM	#1872
Bennett68C10 Registered User Join Date: Dec 2006 Location: Toms River, NJ Posts: 5,518	Re: 1969 SuperBurb build-up (Bagged and Blown!) Beautiful! Nice job on the stereo install too. __________________ Keith 66 Suburban Burb Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=751361 IG: bennett68c10

05-01-2018, 12:19 PM	#1873
WannaBe68 Registered User Join Date: Jun 2016 Location: Texas! Posts: 430	Re: 1969 SuperBurb build-up (Bagged and Blown!) For an Aviator you sure built one hell of a fine ground-pounder! Outstanding!



Register or Log In To remove these advertisements.

05-01-2018, 03:25 PM	#1874
Travisarmenta Registered User Join Date: Oct 2015 Location: Woodbridge Va Posts: 401	Re: 1969 SuperBurb build-up (Bagged and Blown!) Great looking Burb. What bracket did you use for the middle buckets? I tried to find a good picture but no joy. Thanks.

05-01-2018, 10:48 PM	#1875
WannaBe68 Registered User Join Date: Jun 2016 Location: Texas! Posts: 430	Re: 1969 SuperBurb build-up (Bagged and Blown!) Sorry for the bounce back - but I have a quick question on something you posted in another thread regarding the ceiling bows. "UPDATE: I have all my panels cut and installed. The fit is good and the satin white is similar to the factory original. I have been trying to find some nice plastic headliner bows, but that is starting to seem like an impossible task. So I got in contact with a company about manufacturing some new ones. I sent them a couple of pieces to use as samples. I think this will probably happen. They won't be chrome like the originals, but they will be paintable. In the meantime, I took the 3 nicest bows that I have and color matched them to the headliner material. This will have to do for right now." Did you ever get those custom made bows?

Register or Log In To remove these advertisements.