PO has me PO'd - Page 77 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**jaros44sr** · 11-08-2012, 11:05 AM

Quote:

Originally Posted by Captainfab

No, just curious if FAST makes a retrofit harness for the TPI for use with the XFI, or if you had to modify one to work.

So the EFI will control an electronic transmission?

Dealer said it would also control the trans., but i dont have the money for that mod., yet.

**jaros44sr** · 11-09-2012, 12:01 PM

Location,location,location.....

Fourth possible mounting spot. Considered face of heater box, passenger side kick panel, firewall behind glovebox, and now inside glovebox. Leaning towards inside, making new sheetmetal glovebox/pcm mount

20121109_105059 by jarosaj, on Flickr

**jaros44sr** · 11-09-2012, 01:48 PM

Quote:

Originally Posted by jaros44sr

Well, not really...been laid up for a couple weeks with a banged up ankle!

Got the fuel regulater mounted in the fuel rail, so that part just needs the gauge.

Waiting on a couple thousand to come in to buy my FAST XFI system, then i should have lots to do. Right now im just plugging away at little stuff to keep busy, feels good to be able to stand up again

Guys over at -----------------have been really helpful, making sure i dont buy the wrong part or something i dont need. This really helps when you have no idea what your doing!

My main problem is the PCV system. Bought the valve yesterday to put in the vc, but that is all i know of the stock system. Dunno where it gets plugged into the plenum....searched and searched, read and read, but cant find any actual pictures of what the system looks like. Found some diagrams, so i know where it goes, just not how it actually hooks up with the fittings and size of vacuum lines...ill keep searching, i know the info is out there, maybe buy an old assembly manual for an '85 corvette

Been meanin' to post up on your build thread to see what youre up to...i know you made progress

Thanks for lookin

Deleted company name

Dale99 · 11-09-2012, 03:09 PM

In my old show truck s10 I used the glove box to hold my pcm, HATED IT. I would suggest behind and under the dash.

**jaros44sr** · 11-09-2012, 03:21 PM

Quote:

Originally Posted by Dale99

In my old show truck s10 I used the glove box to hold my pcm, HATED IT. I would suggest behind and under the dash.

Thanks for the input, illpost up a pic of the mount. Should be deeper in the glove box area, closer to the firewall, and then remake cardboard glovebox...lmk, what you think after i make the mount. Just thought i should be able to see the leds

Maybe make the back of the glovebox out of plexiglass

Dale99 · 11-09-2012, 06:52 PM

the plexiglass idea is good! Its your truck so do as you wish, just letting you know my experience.

**jaros44sr** · 11-09-2012, 10:07 PM

Quote:

Originally Posted by Dale99

the plexiglass idea is good! Its your truck so do as you wish, just letting you know my experience.

Still open to options, once i pull the glovebox, ill be able to see how much room i have behind it

Just found a new source for TPI parts, they had my two cables, one for coil to distri., and one for power to coil

tpi parts.net
Cape Coral, Fla

**Captainfab** · 11-10-2012, 02:17 AM

What'd you do that for?

I was just wondering where you bought the XFI ECM.

Quote:

Originally Posted by jaros44sr

Deleted company name

**jaros44sr** · 11-10-2012, 08:55 PM

Quote:

Originally Posted by Captainfab

What'd you do that for?

I was just wondering where you bought the XFI ECM.

All the mail order speed shops carry it for less then i paid.....the owner of the company where i bought it, tried the bait and switch on me. On friday, they said they ordered it. Come tuesday, they said it had arrived. Curious, since it wasnt wrapped in plastic, i opened the box. It was damaged from mounting, so i asked him. He said that it was just mocked up. OK, turned it over, and the date of manufactor was 2008.

I refused to take it, and he ordered another one that arrived on thursday. Just left a untrusting feeling, but he did make it right. I wasnt going to say anything, but since you asked. I have found another speed shop in my area with a dyno, so i will be using him for the final tune

Finally, i have an idea of where to mount it....passenger side kick panel. Thanks Dale

**Captainfab** · 11-11-2012, 01:32 AM

Aaahhhh I understand

Quote:

Originally Posted by jaros44sr

All the mail order speed shops carry it for less then i paid.....the owner of the company where i bought it, tried the bait and switch on me. On friday, they said they ordered it. Come tuesday, they said it had arrived. Curious, since it wasnt wrapped in plastic, i opened the box. It was damaged from mounting, so i asked him. He said that it was just mocked up. OK, turned it over, and the date of manufactor was 2008.

I refused to take it, and he ordered another one that arrived on thursday. Just left a untrusting feeling, but he did make it right. I wasnt going to say anything, but since you asked. I have found another speed shop in my area with a dyno, so i will be using him for the final tune

Finally, i have an idea of where to mount it....passenger side kick panel. Thanks Dale

**jaros44sr** · 11-11-2012, 11:49 PM

Mocked up to see where the rest of the harness will lay. First attempt, pcm was to high, and interfered with the bottom of the dash
Using the holes for the heater control, and a tab on the heater box
If i mounted it on the kickpanel, there was a chance water would drip on it, so im going to try it here

20121111_224030 by jarosaj, on Flickr

**jaros44sr** · 11-15-2012, 03:21 PM

Dale 99, wonder if i could ask another favor, pic...

Need to know where your MAP sensor is located, maybe even a pic of the bracket. 1985 didnt have a boss on the plenum for the bracket. So, i have to come up with a mod.

Your coil mount inspired me to copy it...ty

Dale99 · 11-15-2012, 03:48 PM

My upper plenum is the correct for my year, 90-92, so it has a threaded boss for the bracket on what would be the rear, right side. It has an L-shaped bracket. I made one out of aluminum for a year or so, tell I found a GM one. The map has an elbow that comes out the bottom, and goes right into a vac port.... which your 85 wont have as you mentioned.

You can t some of that off, or I have seen people drill/tap the plenum for extra ports. Or a popular mod is to move the IAT sensor from the bottom of the plenum into the air stream, and then put a hose barb there for more vac ports.

I dont have car with me at moment, so I cant take pics. Will check in a min to see if one of my facebook pics shows it. :edit: nope, will have to take one for you later.

**jaros44sr** · 11-15-2012, 04:14 PM

Quote:

Originally Posted by Dale99

My upper plenum is the correct for my year, 90-92, so it has a threaded boss for the bracket on what would be the rear, right side. It has an L-shaped bracket. I made one out of aluminum for a year or so, tell I found a GM one. The map has an elbow that comes out the bottom, and goes right into a vac port.... which your 85 wont have as you mentioned.

You can t some of that off, or I have seen people drill/tap the plenum for extra ports. Or a popular mod is to move the IAT sensor from the bottom of the plenum into the air stream, and then put a hose barb there for more vac ports.

I dont have car with me at moment, so I cant take pics. Will check in a min to see if one of my facebook pics shows it. :edit: nope, will have to take one for you later.

Thanks for the speedy response...i have a larger port along side of my fuel reg.
port, was going to use that. Your right, parts are hard to find, i do have a 'L' shaped bracket that i havent found the home for yet, maybe ill get lucky and it will be my map sensor bracket

Found new tpi parts supplier, just nothing for used parts. Been hanging out at the FAST XFI forum, asking questions and reading. Starting to get a grasp on all this new terminolgy, and what goes where

Take your time on the pic, as i have lots of other things to work on

Edit...the IAT location may be an option, since i need another port for my brake booster

Dale99 · 11-15-2012, 04:30 PM

post a pic of the questionable bracket.

brake booster goes in the left rear of the plenum. Kinda gets in the way of the spark plug wires.

Dale99 · 11-15-2012, 09:38 PM

ok, looked. As for ports on the plenum, I have..
1. hvac.. pass side
2. charcoal canister.. pass side
3. map.. pass side
4. brake booster.. left rear
5. fuel pressure.. underside where IAT use to be.

If you want any of these full size, give me a pm with your email addy.

**jaros44sr** · 11-15-2012, 11:36 PM

Dude, thank you very much for taking the time, just the info i needed...i dont think the bracket i have is a map bracket, close to that but no cigar. Its gotta go somewhere

Those fat runners look great on there!

**Captainfab** · 11-16-2012, 01:21 AM

Is that a L31 Vortec distributor I see?

Quote:

Originally Posted by Dale99

ok, looked. As for ports on the plenum, I have..
1. hvac.. pass side
2. charcoal canister.. pass side
3. map.. pass side
4. brake booster.. left rear
5. fuel pressure.. underside where IAT use to be.

If you want any of these full size, give me a pm with your email addy.

Dale99 · 11-16-2012, 08:57 AM

Quote:

Originally Posted by Captainfab

Is that a L31 Vortec distributor I see?

Correct Sir, I did the 0411 pcm swap so I have true SFI, rather then batch injecting.

Dale99 · 11-16-2012, 09:06 AM

Quote:

Originally Posted by jaros44sr

Dude, thank you very much for taking the time, just the info i needed...i dont think the bracket i have is a map bracket, close to that but no cigar. Its gotta go somewhere

Those fat runners look great on there!

Post a pic of that bracket.

The runners really helped on the upper rpm range. Most people say TPI chokes out at about 4500, Ive spun this thing up to 5800.

crate 350
alumn vette heads
LT1 cam
stamped rockers(tried full rollers and couldnt make them stay tight)
ported vette base intake
large port runners
modified plenum (got rid of egr wall and hogged out for larger runners)
stock throttle body, but added splitter
0411 pcm swap
stock air intake (heres my choke)
aluminum crank/alt pully

Id like to get the base intake you have, but for stock heads.

**jaros44sr** · 11-16-2012, 12:23 PM

Nice improvements to the engine, Dale. Ill look into the egr mod. Found the ac delco map senser at tpi parts.net

Picked up the harness from my coil to the distri. there too

I see a boss on the plenum at the location you indicated, heres the mystery bracket. Where did you find your map bracket, still searching the net

20121116_111430 by jarosaj, on Flickr

Dale99 · 11-16-2012, 06:59 PM

Ive never seen a bracket like that before.

You "could" drill n tap that, but your taking a risk of a vac leak. I would look at mounting it else where, like maybe on the same bracket as the coil? You depend on how long your wires are for it.

**jaros44sr** · 11-16-2012, 07:24 PM

Quote:

Originally Posted by Dale99

Ive never seen a bracket like that before.

You "could" drill n tap that, but your taking a risk of a vac leak. I would look at mounting it else where, like maybe on the same bracket as the coil? You depend on how long your wires are for it.

Wait, i wasnt planning on mouting it where it sits, just sat it there for display. It will get mounted in the factory location if at all possible

Dale99 · 11-16-2012, 09:15 PM

I was saying to mount both away from the motor on a custom bracket. But the coil is self grounding, so it needs to be on metal.

**Captainfab** · 11-17-2012, 02:49 AM

Very good upgrade.

Quote:

Originally Posted by Dale99

Correct Sir, I did the 0411 pcm swap so I have true SFI, rather then batch injecting.

11-09-2012, 12:01 PM	#1902
jaros44sr Senior Member Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,700	Re: PO has me PO'd Location,location,location..... Fourth possible mounting spot. Considered face of heater box, passenger side kick panel, firewall behind glovebox, and now inside glovebox. Leaning towards inside, making new sheetmetal glovebox/pcm mount 20121109_105059 by jarosaj, on Flickr __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim

11-09-2012, 03:09 PM	#1904
Dale99 Registered User Join Date: Nov 2007 Location: NLR, AR Posts: 1,387	Re: PO has me PO'd In my old show truck s10 I used the glove box to hold my pcm, HATED IT. I would suggest behind and under the dash.

11-09-2012, 06:52 PM	#1906
Dale99 Registered User Join Date: Nov 2007 Location: NLR, AR Posts: 1,387	Re: PO has me PO'd the plexiglass idea is good! Its your truck so do as you wish, just letting you know my experience.

11-11-2012, 11:49 PM	#1911
jaros44sr Senior Member Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,700	Re: PO has me PO'd Mocked up to see where the rest of the harness will lay. First attempt, pcm was to high, and interfered with the bottom of the dash Using the holes for the heater control, and a tab on the heater box If i mounted it on the kickpanel, there was a chance water would drip on it, so im going to try it here 20121111_224030 by jarosaj, on Flickr __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim

11-15-2012, 03:21 PM	#1912
jaros44sr Senior Member Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,700	Re: PO has me PO'd Dale 99, wonder if i could ask another favor, pic... Need to know where your MAP sensor is located, maybe even a pic of the bracket. 1985 didnt have a boss on the plenum for the bracket. So, i have to come up with a mod. Your coil mount inspired me to copy it...ty __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim

11-15-2012, 03:48 PM	#1913
Dale99 Registered User Join Date: Nov 2007 Location: NLR, AR Posts: 1,387	Re: PO has me PO'd My upper plenum is the correct for my year, 90-92, so it has a threaded boss for the bracket on what would be the rear, right side. It has an L-shaped bracket. I made one out of aluminum for a year or so, tell I found a GM one. The map has an elbow that comes out the bottom, and goes right into a vac port.... which your 85 wont have as you mentioned. You can t some of that off, or I have seen people drill/tap the plenum for extra ports. Or a popular mod is to move the IAT sensor from the bottom of the plenum into the air stream, and then put a hose barb there for more vac ports. I dont have car with me at moment, so I cant take pics. Will check in a min to see if one of my facebook pics shows it. :edit: nope, will have to take one for you later.

11-15-2012, 04:30 PM	#1915
Dale99 Registered User Join Date: Nov 2007 Location: NLR, AR Posts: 1,387	Re: PO has me PO'd post a pic of the questionable bracket. brake booster goes in the left rear of the plenum. Kinda gets in the way of the spark plug wires.

11-15-2012, 09:38 PM	#1916
Dale99 Registered User Join Date: Nov 2007 Location: NLR, AR Posts: 1,387	Re: PO has me PO'd ok, looked. As for ports on the plenum, I have.. 1. hvac.. pass side 2. charcoal canister.. pass side 3. map.. pass side 4. brake booster.. left rear 5. fuel pressure.. underside where IAT use to be. If you want any of these full size, give me a pm with your email addy. Attached Images

11-15-2012, 11:36 PM	#1917
jaros44sr Senior Member Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,700	Re: PO has me PO'd Dude, thank you very much for taking the time, just the info i needed...i dont think the bracket i have is a map bracket, close to that but no cigar. Its gotta go somewhere Those fat runners look great on there! __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim

11-16-2012, 12:23 PM	#1921
jaros44sr Senior Member Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,700	Re: PO has me PO'd Nice improvements to the engine, Dale. Ill look into the egr mod. Found the ac delco map senser at tpi parts.net Picked up the harness from my coil to the distri. there too I see a boss on the plenum at the location you indicated, heres the mystery bracket. Where did you find your map bracket, still searching the net 20121116_111430 by jarosaj, on Flickr __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim

11-16-2012, 06:59 PM	#1922
Dale99 Registered User Join Date: Nov 2007 Location: NLR, AR Posts: 1,387	Re: PO has me PO'd Ive never seen a bracket like that before. You "could" drill n tap that, but your taking a risk of a vac leak. I would look at mounting it else where, like maybe on the same bracket as the coil? You depend on how long your wires are for it.

11-16-2012, 09:15 PM	#1924
Dale99 Registered User Join Date: Nov 2007 Location: NLR, AR Posts: 1,387	Re: PO has me PO'd I was saying to mount both away from the motor on a custom bracket. But the coil is self grounding, so it needs to be on metal.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.