** YOUNG FRANKENSTEIN ** The truck Chevrolet should have built. - Page 78 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

VA72C10 · 10-04-2011, 01:31 AM

Quote:

Originally Posted by pickup67man

I'm more of a laid back stalker. I just watch. But this is my 11th post here. I haven't read it for almost a week so I'm 4 pages back and missed the subject.

laid back stalker

drewskiren · 10-04-2011, 08:46 AM

Quote:

Originally Posted by 70LonghornCST

You know, Drew...at the rate that you are going on this build, I sure hope you have another project lined up for the near future. You were destined to build trucks. Keep the inspiration flowing.

Sorry to disappoint but no more trucks on the horizon. When I'm feeling up to it, another project it might be a 69 Camaro or a 65 Corvette. I figured I needed a tow vehicle first, and then the real restoration car project could begin.

**Dieselwrencher** · 10-04-2011, 02:36 PM

Quote:

Originally Posted by drewskiren

Sorry to disappoint but no more trucks on the horizon. When I'm feeling up to it another project it might be a 69 Camaro or a 65 Corvette. I figured I needed a tow vehicle first, and then the real restoration car project could begin.

Not a disappointment here. Just put the build thread on the alternate tinkerings area and all your stalkers will follow.

I'd like to build either car you mentioned. I'd rather have a mid year vette, but they'd need to reproduce a body so I can afford one.

Great work as usual Drew.

drewskiren · 10-04-2011, 09:59 PM

Quote:

Originally Posted by VA72C10

Good progress....have you considered the shroud cover they sell in the parts catalogs in either polished or raw....or possibly a 2nd gen camaro or similar cover?

I am meeting a metal artist in the morning to come up with something nice. It is kinda front and center you know.

Ridnhi · 10-04-2011, 10:41 PM

I would love to see you build a 69 camaro, Im building a 67 and Im sure you would motivate me to work on that too!

VA72C10 · 10-05-2011, 01:17 AM

Quote:

Originally Posted by drewskiren

I am meeting a metal artist in the morning to come up with something nice. It is kinda front and center you know.

something like this?

http://67-72chevytrucks.com/vboard/s...8&postcount=72

c10/72 · 10-05-2011, 02:27 AM

Sir,
I've followed your build since I first became a member, and seeing what you've done and some of the others on this site. Is a real inspiration to me. I cannot wait to see your finished project. Keep up the great work and thank you.
Eric

jhott1996 · 10-05-2011, 12:09 PM

This build is off the chart...... Got to ask what are your plans for the 8 lug mags that was on the green truck.... Would look great on my daughters build. It is a 72 camper special.

drewskiren · 10-05-2011, 02:44 PM

Quote:

Originally Posted by jhott1996

This build is off the chart...... Got to ask what are your plans for the 8 lug mags that was on the green truck.... Would look great on my daughters build. It is a 72 camper special.

They were 16.5 inch and are probably containing Coke products by now. (scrapyard)

jhott1996 · 10-05-2011, 03:15 PM

Ah that too bad.... They looked nice. I will find something.

drewskiren · 10-05-2011, 10:05 PM

Quote:

Originally Posted by VA72C10

something like this?

http://67-72chevytrucks.com/vboard/s...8&postcount=72

Yes sort of. After we met today, I think everyone will be pleased with my choice.

drewskiren · 10-05-2011, 10:36 PM

I know I am bouncing around here a little, but just putting stuff together as I run across it.
I installed the driveshaft, measured, and took it back out. Need 4.5 inches added and I will take it in next week.

Partially installed the steering wheel & column and fully installed the brake booster.

Added the A/C condenser to the grille area for fitment purposes, but it will be in and out several more times.

Looked at how the Mass air and filter box will fit also.

Mocking up the rear air bags and deciding how and where to attach for 9 inch standard ride height. The air bag is 9 inches tall inflated.

VA72C10 · 10-05-2011, 10:43 PM

good progress! Got a 1st drive planned yet?

**67cheby** · 10-05-2011, 10:45 PM

holy smokes....thats a whole lot of stuff going on !! i am sure you will wrap it all up and make it look easy !!

drewskiren · 10-05-2011, 11:01 PM

Quote:

Originally Posted by VA72C10

good progress! Got a 1st drive planned yet?

No dice! Who knows if it will ever drive again, have you SEEN my wiring mess???

**67cheby** · 10-05-2011, 11:03 PM

lol...thats funny

**Dieselwrencher** · 10-06-2011, 11:59 AM

Man that wiring looks like fun! Good luck with it!

**68 Four on the Floor** · 10-06-2011, 07:01 PM

Uggggggg i hate wiring

chevy2racr · 10-06-2011, 11:33 PM

i know when i put at carb'ed small block in my 99 S-10 I got rid of a lot of wiring... keeping it all and adjusting it to work...???... i think i just woulda lit it on fire and walked....

FRENCHBLUE72 · 10-07-2011, 11:55 AM

Thats a hole lotta wire hangin out from that dash...

FrankieD · 10-07-2011, 03:46 PM

Hope you have a shoe horn for those wires, I get the heby jebys just looking at them

drewskiren · 10-08-2011, 12:33 PM

We are back from college visits at Vanderbilt and UVA, so time to get back on the monster. This morning I am cutting and welding up my bag frame brackets.

coops714x4 · 10-08-2011, 02:13 PM

HHHMMM curious to see how your gonna do this??? Oh by the way BOOMER SOONER

drewskiren · 10-08-2011, 08:18 PM

I know these look a little strange, but the paint was wet so I couldn't show them mounted. All that is left is to drill out these to mount the upper bag mount.
The right side gets the panhard rod mount too.

jb1016 · 10-08-2011, 10:53 PM

Vandy! Your son must be very smart, and a hard worker. The Dores didn't do so well in Tuscaloosa tonight...but like I always say, if anybody gets hurt, Vandy probably has four or five future doctors on the field...

10-04-2011, 10:41 PM	#1930
Ridnhi Registered User Join Date: Nov 2010 Location: Marion, IL Posts: 719	Re: YOUNG FRANKENSTEIN The truck Chevrolet should have built. I would love to see you build a 69 camaro, Im building a 67 and Im sure you would motivate me to work on that too! __________________ 1972 K5 Auto 4x4 factory air 2007 Silverado extended cab Z71

10-05-2011, 02:27 AM	#1932
c10/72 Registered User Join Date: Jun 2009 Location: Clovis, NM Posts: 114	Re: YOUNG FRANKENSTEIN The truck Chevrolet should have built. Sir, I've followed your build since I first became a member, and seeing what you've done and some of the others on this site. Is a real inspiration to me. I cannot wait to see your finished project. Keep up the great work and thank you. Eric __________________ Tex (USAF) -72 C10 SWB--bagged on 22" -79 Mini Cooper pickup--on hold -95 Chevy Dually Crewcab--tow-rig -06 Magnum Hemi RT--wifey's -06 Yamaha R1--fun times

10-05-2011, 12:09 PM	#1933
jhott1996 Registered User Join Date: Sep 2010 Location: Wayland, Michigan Posts: 15	Re: YOUNG FRANKENSTEIN The truck Chevrolet should have built. This build is off the chart...... Got to ask what are your plans for the 8 lug mags that was on the green truck.... Would look great on my daughters build. It is a 72 camper special.

10-05-2011, 03:15 PM	#1935
jhott1996 Registered User Join Date: Sep 2010 Location: Wayland, Michigan Posts: 15	Re: YOUNG FRANKENSTEIN The truck Chevrolet should have built. Ah that too bad.... They looked nice. I will find something.

10-05-2011, 10:36 PM	#1937
drewskiren Lucky Teter at the wheel Join Date: Aug 2009 Location: Memphis, TN Posts: 1,896	Re: YOUNG FRANKENSTEIN The truck Chevrolet should have built. I know I am bouncing around here a little, but just putting stuff together as I run across it. I installed the driveshaft, measured, and took it back out. Need 4.5 inches added and I will take it in next week. Partially installed the steering wheel & column and fully installed the brake booster. Added the A/C condenser to the grille area for fitment purposes, but it will be in and out several more times. Looked at how the Mass air and filter box will fit also. Mocking up the rear air bags and deciding how and where to attach for 9 inch standard ride height. The air bag is 9 inches tall inflated. Attached Images __________________ Drew YOUNG FRANKENSTEIN (Finished with MAJOR Surgery - IT'S ALIVE!!!) The Bride is currently under the knife!

10-05-2011, 10:43 PM	#1938
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: YOUNG FRANKENSTEIN The truck Chevrolet should have built. good progress! Got a 1st drive planned yet? __________________ Looking for a 67-72 swb or blazer project in or around VA.

10-05-2011, 10:45 PM	#1939
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: YOUNG FRANKENSTEIN The truck Chevrolet should have built. holy smokes....thats a whole lot of stuff going on !! i am sure you will wrap it all up and make it look easy !! __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

10-05-2011, 11:03 PM	#1941
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: YOUNG FRANKENSTEIN The truck Chevrolet should have built. lol...thats funny __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

10-06-2011, 11:59 AM	#1942
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,139	Re: YOUNG FRANKENSTEIN The truck Chevrolet should have built. Man that wiring looks like fun! Good luck with it! __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

10-06-2011, 07:01 PM	#1943
68 Four on the Floor Senior Member Join Date: Jun 2011 Location: Washburn, IA Posts: 600	Re: YOUNG FRANKENSTEIN The truck Chevrolet should have built. Uggggggg i hate wiring

10-06-2011, 11:33 PM	#1944
chevy2racr So Many Ideas, So Little Money Join Date: Sep 2001 Location: Marshalltown, IA Posts: 1,610	Re: YOUNG FRANKENSTEIN The truck Chevrolet should have built. i know when i put at carb'ed small block in my 99 S-10 I got rid of a lot of wiring... keeping it all and adjusting it to work...???... i think i just woulda lit it on fire and walked.... __________________ 72 Blazer 3/4 ton running gear 4.10s NP205/TH350 350 4in lift half doors 71 C10 with 454 99 S-10 5.1L SBC 700R4 09 Malibu Marshalltown, Iowa

10-07-2011, 11:55 AM	#1945
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,608	Re: YOUNG FRANKENSTEIN The truck Chevrolet should have built. Thats a hole lotta wire hangin out from that dash... __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

10-07-2011, 03:46 PM	#1946
FrankieD Registered User Join Date: Jan 2011 Location: Gilberts IL. Posts: 2,488	Re: YOUNG FRANKENSTEIN The truck Chevrolet should have built. Hope you have a shoe horn for those wires, I get the heby jebys just looking at them __________________ 94 k2500 EXCab Long Bed 350ci New Toy 95 K2500 Suburban New PlowTruck 454ci Support our Troops @ http://anyairman.com http://www.woundedwarriorproject.org/

10-08-2011, 12:33 PM	#1947
drewskiren Lucky Teter at the wheel Join Date: Aug 2009 Location: Memphis, TN Posts: 1,896	Re: YOUNG FRANKENSTEIN The truck Chevrolet should have built. We are back from college visits at Vanderbilt and UVA, so time to get back on the monster. This morning I am cutting and welding up my bag frame brackets. Attached Images __________________ Drew YOUNG FRANKENSTEIN (Finished with MAJOR Surgery - IT'S ALIVE!!!) The Bride is currently under the knife!

10-08-2011, 02:13 PM	#1948
coops714x4 Registered User Join Date: Mar 2011 Location: Cement Oklahoma Posts: 916	Re: YOUNG FRANKENSTEIN The truck Chevrolet should have built. HHHMMM curious to see how your gonna do this??? Oh by the way BOOMER SOONER __________________ 1971 K20, Coop's beast (project) 1972 C30 wrecker, "Big Ernest" (SOLD) 1975 K5 Blazer (wife's toy) she got it in the divorce 2014 Street Glide Special 1983 K20 Big Block, auto (work horse)



Register or Log In To remove these advertisements.

10-08-2011, 08:18 PM	#1949
drewskiren Lucky Teter at the wheel Join Date: Aug 2009 Location: Memphis, TN Posts: 1,896	Re: YOUNG FRANKENSTEIN The truck Chevrolet should have built. I know these look a little strange, but the paint was wet so I couldn't show them mounted. All that is left is to drill out these to mount the upper bag mount. The right side gets the panhard rod mount too. Attached Images __________________ Drew YOUNG FRANKENSTEIN (Finished with MAJOR Surgery - IT'S ALIVE!!!) The Bride is currently under the knife!

Register or Log In To remove these advertisements.