07-13-2015, 09:30 AM | #1951 |
Registered User
Join Date: Nov 2011
Location: fayetteville nc
Posts: 10,338
|
Re: 1963 C-10 in NC
Eric showed up shortly after lunch. We got the brakes bled, still need some minor adjusting, but won't take much.
We also worked on the hydraulic clutch. Will need just a touch more adjusting there also. Slave still feels a little spongy, so still has some air in it. Doing all this around a big block and long tube headers is fun if you've never had the experience. Later in the evening we switched gears to the engine. Got the covers swapped, #1 set to TDC, distributor pulled.....plenty of room for removal with the cap removed, engine primed, battery installed and of coarse it was dead, so took the battery out of Austins 63 and the oem starter just doesn't have enough to kick it over. Tried jumping off a truck and same result. By this time it was around 830, so we called it a night. I want to come in tonight and recheck that all grounds are good 1st, before I commit to a hi torque starter as it almost sounds like it doesn't have a good enough ground. Ran block to firewall grounds, battery to block and block to frame, so will pull grounds and make sure we have good contact. Couple of pics of the vintage covers installed.
__________________
1963 Short bed step side SBW 427 big block and borg warner T-16 HD 3 speed manual http://67-72chevytrucks.com/vboard/s...d.php?t=519869 1963 Short bed fleetside BBW 348 1st gen big block w/Powerglide http://67-72chevytrucks.com/vboard/s...d.php?t=619024 1964 Short bed trailer Last edited by 1963c-10; 07-13-2015 at 12:48 PM. |
07-13-2015, 09:54 AM | #1952 |
Registered User
Join Date: Mar 2013
Location: Southern Oregon
Posts: 10,384
|
Re: 1963 C-10 in NC
Looks sweet!
__________________
1966 Chevy C10 "Project Two Tone" http://67-72chevytrucks.com/vboard/s...d.php?t=596643 1964 GMC "Crustine" semi-build:http://67-72chevytrucks.com/vboard/s...d.php?t=665056 My youtube channel. Username "Military Chevy": https://www.youtube.com/channel/UC_h...fzpcUXyK_5-uiw |
07-13-2015, 10:21 AM | #1953 |
Registered User
Join Date: Nov 2011
Location: fayetteville nc
Posts: 10,338
|
Re: 1963 C-10 in NC
Thanks TJ. Hoping I just have a bad ground issue and will have the engine resolved tonight. 2nd battery was good, but just got a click at the starter, so starter/selonoid either bad or bad grounds in my opinion.
__________________
1963 Short bed step side SBW 427 big block and borg warner T-16 HD 3 speed manual http://67-72chevytrucks.com/vboard/s...d.php?t=519869 1963 Short bed fleetside BBW 348 1st gen big block w/Powerglide http://67-72chevytrucks.com/vboard/s...d.php?t=619024 1964 Short bed trailer Last edited by 1963c-10; 07-13-2015 at 10:28 AM. |
07-13-2015, 10:22 AM | #1954 |
Registered User
Join Date: Feb 2014
Location: Stephens City, VA
Posts: 326
|
Re: 1963 C-10 in NC
Looks sharp!
__________________
1962 Chevy C-10 Stepside 383 Stroker, Turbo 400 1966 Chevy C-10 Stepside 250 6Cyl, 3OTT- Daily Driver John 3:16 |
07-13-2015, 10:28 AM | #1955 |
Registered User
Join Date: Nov 2011
Location: fayetteville nc
Posts: 10,338
|
Re: 1963 C-10 in NC
__________________
1963 Short bed step side SBW 427 big block and borg warner T-16 HD 3 speed manual http://67-72chevytrucks.com/vboard/s...d.php?t=519869 1963 Short bed fleetside BBW 348 1st gen big block w/Powerglide http://67-72chevytrucks.com/vboard/s...d.php?t=619024 1964 Short bed trailer |
07-13-2015, 10:38 AM | #1956 |
Registered User
Join Date: Feb 2014
Location: Stephens City, VA
Posts: 326
|
Re: 1963 C-10 in NC
In the same boat with you Jon, went to start mine on Sunday, got to hear it run for about 2 mins, for the first time since Nov. Hang in there, I'm sure you'll be making motor music soon.
__________________
1962 Chevy C-10 Stepside 383 Stroker, Turbo 400 1966 Chevy C-10 Stepside 250 6Cyl, 3OTT- Daily Driver John 3:16 |
07-13-2015, 10:51 AM | #1957 |
State of Confusion!
Join Date: Jul 2002
Location: Gulfport, MS USA
Posts: 47,090
|
Re: 1963 C-10 in NC
Looking good. Hope it goes good and you hear the roar tonight.
__________________
Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God! |
07-13-2015, 11:14 AM | #1958 |
Registered User
Join Date: Nov 2011
Location: fayetteville nc
Posts: 10,338
|
Re: 1963 C-10 in NC
Thanks....we worked all day in anticipation of firing of the engine. All ready and got.....click. Disappointing, but we'll get it right. The starter was good that I put on it so really hoping just a ground issue. If the ground doesn't resolve it.....pass side header off and starter replacement. The 3 bolt snout starters are very limited on whats available. If I have to replace will probably be a powermaster 3635
__________________
1963 Short bed step side SBW 427 big block and borg warner T-16 HD 3 speed manual http://67-72chevytrucks.com/vboard/s...d.php?t=519869 1963 Short bed fleetside BBW 348 1st gen big block w/Powerglide http://67-72chevytrucks.com/vboard/s...d.php?t=619024 1964 Short bed trailer |
07-13-2015, 11:14 AM | #1959 |
Registered User
Join Date: Nov 2011
Location: fayetteville nc
Posts: 10,338
|
Re: 1963 C-10 in NC
Thanks and same here. Would love to hear her fire up tonight.
__________________
1963 Short bed step side SBW 427 big block and borg warner T-16 HD 3 speed manual http://67-72chevytrucks.com/vboard/s...d.php?t=519869 1963 Short bed fleetside BBW 348 1st gen big block w/Powerglide http://67-72chevytrucks.com/vboard/s...d.php?t=619024 1964 Short bed trailer |
07-13-2015, 11:23 AM | #1960 |
Registered User
Join Date: Mar 2013
Location: Southern Oregon
Posts: 10,384
|
Re: 1963 C-10 in NC
Might need some more cranking amps to. Sometimes its the starter....sometimes its the battery not having enough guts to.
__________________
1966 Chevy C10 "Project Two Tone" http://67-72chevytrucks.com/vboard/s...d.php?t=596643 1964 GMC "Crustine" semi-build:http://67-72chevytrucks.com/vboard/s...d.php?t=665056 My youtube channel. Username "Military Chevy": https://www.youtube.com/channel/UC_h...fzpcUXyK_5-uiw |
07-13-2015, 11:24 AM | #1961 |
Registered User
Join Date: Nov 2011
Location: fayetteville nc
Posts: 10,338
|
Re: 1963 C-10 in NC
1000cca battery is whats installed
__________________
1963 Short bed step side SBW 427 big block and borg warner T-16 HD 3 speed manual http://67-72chevytrucks.com/vboard/s...d.php?t=519869 1963 Short bed fleetside BBW 348 1st gen big block w/Powerglide http://67-72chevytrucks.com/vboard/s...d.php?t=619024 1964 Short bed trailer |
07-13-2015, 11:26 AM | #1962 |
Registered User
Join Date: Mar 2013
Location: Southern Oregon
Posts: 10,384
|
Re: 1963 C-10 in NC
__________________
1966 Chevy C10 "Project Two Tone" http://67-72chevytrucks.com/vboard/s...d.php?t=596643 1964 GMC "Crustine" semi-build:http://67-72chevytrucks.com/vboard/s...d.php?t=665056 My youtube channel. Username "Military Chevy": https://www.youtube.com/channel/UC_h...fzpcUXyK_5-uiw |
07-13-2015, 12:20 PM | #1963 |
Registered User
Join Date: Aug 2009
Location: North Carolina
Posts: 127
|
Re: 1963 C-10 in NC
I had a great time playing with the truck yesterday and wasn't in to much trouble for hanging out all day. I was thinking ground, but you could hear the draw on Austin's truck when you tried to kick it over. I think in the long run a good high torque will save you a lot of headache. Big blocks just take so much to turn them over.
__________________
84 GMC One ton 4x4 454 4 speed 62 Chevy C10 short fleet plus about 13 previous gm trucks from 1960 to 2000 |
07-13-2015, 12:45 PM | #1964 |
Registered User
Join Date: Nov 2011
Location: fayetteville nc
Posts: 10,338
|
Re: 1963 C-10 in NC
Looking like powermaster 3635 Eric...only hi torque 3 bolt nose starter I found
http://www.jegs.com/i/Powermaster/713/3635/10002/-1 That means header removal on pass side and clutch inspection plates have to drop...love it
__________________
1963 Short bed step side SBW 427 big block and borg warner T-16 HD 3 speed manual http://67-72chevytrucks.com/vboard/s...d.php?t=519869 1963 Short bed fleetside BBW 348 1st gen big block w/Powerglide http://67-72chevytrucks.com/vboard/s...d.php?t=619024 1964 Short bed trailer |
07-13-2015, 12:47 PM | #1965 |
Registered User
Join Date: Feb 2014
Location: Stephens City, VA
Posts: 326
|
Re: 1963 C-10 in NC
If you got all those CCA's and the battery is fully charged. I'll bet your problems gonna be all that new paint(connection issues)
Performing the Volt Drops should help you find those issues and correct them real quick. Not saying that a good PMGR starter would not be a good addition to that BBC.
__________________
1962 Chevy C-10 Stepside 383 Stroker, Turbo 400 1966 Chevy C-10 Stepside 250 6Cyl, 3OTT- Daily Driver John 3:16 |
07-13-2015, 12:50 PM | #1966 | |
Registered User
Join Date: Nov 2011
Location: fayetteville nc
Posts: 10,338
|
Re: 1963 C-10 in NC
Quote:
__________________
1963 Short bed step side SBW 427 big block and borg warner T-16 HD 3 speed manual http://67-72chevytrucks.com/vboard/s...d.php?t=519869 1963 Short bed fleetside BBW 348 1st gen big block w/Powerglide http://67-72chevytrucks.com/vboard/s...d.php?t=619024 1964 Short bed trailer |
|
07-13-2015, 01:14 PM | #1967 |
Registered User
Join Date: Nov 2011
Location: fayetteville nc
Posts: 10,338
|
Re: 1963 C-10 in NC
Will be looking at a heat shield also......
__________________
1963 Short bed step side SBW 427 big block and borg warner T-16 HD 3 speed manual http://67-72chevytrucks.com/vboard/s...d.php?t=519869 1963 Short bed fleetside BBW 348 1st gen big block w/Powerglide http://67-72chevytrucks.com/vboard/s...d.php?t=619024 1964 Short bed trailer |
07-14-2015, 08:52 AM | #1968 |
Registered User
Join Date: Nov 2011
Location: fayetteville nc
Posts: 10,338
|
Re: 1963 C-10 in NC
Went home and my new ground kit arrived. So, new grounds on both heads to firewall. Added a ground from the voltage regulator to the horn to radiator support and moved and cleaned the block to frame connection. It now runs directly to the block, not off a mount to the block.
__________________
1963 Short bed step side SBW 427 big block and borg warner T-16 HD 3 speed manual http://67-72chevytrucks.com/vboard/s...d.php?t=519869 1963 Short bed fleetside BBW 348 1st gen big block w/Powerglide http://67-72chevytrucks.com/vboard/s...d.php?t=619024 1964 Short bed trailer |
07-14-2015, 09:11 AM | #1969 |
Registered User
Join Date: Nov 2011
Location: fayetteville nc
Posts: 10,338
|
Re: 1963 C-10 in NC
Couple more
__________________
1963 Short bed step side SBW 427 big block and borg warner T-16 HD 3 speed manual http://67-72chevytrucks.com/vboard/s...d.php?t=519869 1963 Short bed fleetside BBW 348 1st gen big block w/Powerglide http://67-72chevytrucks.com/vboard/s...d.php?t=619024 1964 Short bed trailer |
07-14-2015, 09:12 AM | #1970 |
Registered User
Join Date: Feb 2014
Location: Stephens City, VA
Posts: 326
|
Re: 1963 C-10 in NC
Ground straps look great! Where did you get them?
__________________
1962 Chevy C-10 Stepside 383 Stroker, Turbo 400 1966 Chevy C-10 Stepside 250 6Cyl, 3OTT- Daily Driver John 3:16 |
07-14-2015, 09:13 AM | #1971 |
Registered User
Join Date: Nov 2011
Location: fayetteville nc
Posts: 10,338
|
Re: 1963 C-10 in NC
And another big concern resolved.
Plenty of room on the tail shaft mount shifter. 1st 3 pics are in 1st gear and last is in reverse. Seat is still two notches from farthest position so still more room to go back. Relieved that we are good here. Do need to figure out a different shift boot as the hurst one will not work here.
__________________
1963 Short bed step side SBW 427 big block and borg warner T-16 HD 3 speed manual http://67-72chevytrucks.com/vboard/s...d.php?t=519869 1963 Short bed fleetside BBW 348 1st gen big block w/Powerglide http://67-72chevytrucks.com/vboard/s...d.php?t=619024 1964 Short bed trailer |
07-14-2015, 09:14 AM | #1972 |
Registered User
Join Date: Nov 2011
Location: fayetteville nc
Posts: 10,338
|
Re: 1963 C-10 in NC
And a couple of extra pics
__________________
1963 Short bed step side SBW 427 big block and borg warner T-16 HD 3 speed manual http://67-72chevytrucks.com/vboard/s...d.php?t=519869 1963 Short bed fleetside BBW 348 1st gen big block w/Powerglide http://67-72chevytrucks.com/vboard/s...d.php?t=619024 1964 Short bed trailer |
07-14-2015, 09:16 AM | #1973 |
Registered User
Join Date: Nov 2011
Location: fayetteville nc
Posts: 10,338
|
Re: 1963 C-10 in NC
Got them off ebay. $18 shipped and nice quality
Link: http://www.ebay.com/itm/191358201525...%3AMEBIDX%3AIT
__________________
1963 Short bed step side SBW 427 big block and borg warner T-16 HD 3 speed manual http://67-72chevytrucks.com/vboard/s...d.php?t=519869 1963 Short bed fleetside BBW 348 1st gen big block w/Powerglide http://67-72chevytrucks.com/vboard/s...d.php?t=619024 1964 Short bed trailer |
07-14-2015, 09:16 AM | #1974 |
Registered User
Join Date: Nov 2011
Location: fayetteville nc
Posts: 10,338
|
Re: 1963 C-10 in NC
Since your the electrician.....do the grounds look placed ok? Any more I should add?
__________________
1963 Short bed step side SBW 427 big block and borg warner T-16 HD 3 speed manual http://67-72chevytrucks.com/vboard/s...d.php?t=519869 1963 Short bed fleetside BBW 348 1st gen big block w/Powerglide http://67-72chevytrucks.com/vboard/s...d.php?t=619024 1964 Short bed trailer |
07-14-2015, 10:51 AM | #1975 |
Registered User
Join Date: Mar 2013
Location: Southern Oregon
Posts: 10,384
|
Re: 1963 C-10 in NC
Fancy ground straps. My 292 in my 66 never had any for some reason...or any that I remember...its been awhile since I've seen it. haha. My 305 v6 has 1 on the driver's side valve cover to the fire wall. It didn't even matter weather I left it off or not. Not sure if I'm gonna use any on the new engine either...hope I don't need to.
__________________
1966 Chevy C10 "Project Two Tone" http://67-72chevytrucks.com/vboard/s...d.php?t=596643 1964 GMC "Crustine" semi-build:http://67-72chevytrucks.com/vboard/s...d.php?t=665056 My youtube channel. Username "Military Chevy": https://www.youtube.com/channel/UC_h...fzpcUXyK_5-uiw |
Bookmarks |
|
|