1965/73 Cheap Build Up - Page 8 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Strodder · 06-26-2009, 02:53 PM

Quote:

Originally Posted by 4dranch

Nice work Dennis....Where is the dirt coming from? Your shop looks to be "eat off the floor clean.."

Thanks D. The wind kicked up. All it takes is one gust. It's windy up here a lot too.

4dranch · 06-26-2009, 05:18 PM

Quote:

Originally Posted by Strodder

Thanks D. The wind kicked up. All it takes is one gust. It's windy up here a lot too.

Well it's good to see a lot of cars in your shop...I know you may not think so some times, but with the economy the way it is, give thanks Dennis...

Strodder · 06-26-2009, 09:08 PM

Quote:

Originally Posted by 4dranch

Well it's good to see a lot of cars in your shop...I know you may not think so some times, but with the economy the way it is, give thanks Dennis...

Believe me I'm thankful. And lucky too. I still need to spread the word to keep busy. I was coming home from getting parts, and I saw my old 37 Ford Coupe driving the other way. I sold it about 15 years ago. I did a big U turn to talk to him. This guy just bought it 2 months ago from the guy I sold it to. It looked exactly the way it was when I sold it. It still looked great. He needs some work done on it. That's more work that I hope I get. He was missing his front license plate. It said 37 Steel. I told him that I had it. And he can have it free. So I know he will be in to see me. I'll post a picture of it when he comes in.

Alan's Classic · 06-26-2009, 10:01 PM

Nice work Dennis, as always.

1964C10 · 06-26-2009, 12:32 PM

Nice looking truck Dennis! I noticed the wiper motor mounted on the firewall, is that stock? If not could you elaborate a little on how you went about doing that? I have been wanting to upgrade mine in my 64. Thanks!

daverod · 06-26-2009, 01:01 PM

When other people do it I've noticed they get a lot more paint all over the place.

I wounder if you can spray that stuff? Is it to thick?

Strodder · 06-26-2009, 03:12 PM

Quote:

Originally Posted by daverod

When other people do it I've noticed they get a lot more paint all over the place.

I wounder if you can spray that stuff? Is it to thick?

No it's thin, but covers really good. POR-15 said you can spray it too. But why when it comes out really smooth. Besides you don't have to mask anything. Just a drop cloth so if it drips it won't get on the floor.

Strodder · 06-26-2009, 03:08 PM

Quote:

Originally Posted by 1964C10

Nice looking truck Dennis! I noticed the wiper motor mounted on the firewall, is that stock? If not could you elaborate a little on how you went about doing that? I have been wanting to upgrade mine in my 64. Thanks!

Look again. It's a 1963 Studebaker Lark. The wiper motor is in the stock location.

1964C10 · 06-26-2009, 03:30 PM

Quote:

Originally Posted by Strodder

Look again. It's a 1963 Studebaker Lark. The wiper motor is in the stock location.

Sorry about that Dennis, somewhere along the way I missed that "little" detail.

Strodder · 06-26-2009, 08:59 PM

Quote:

Originally Posted by 1964C10

Sorry about that Dennis, somewhere along the way I missed that "little" detail.

Not a problem.

joe231 · 06-26-2009, 11:58 PM

you are making me believe that going POR is the right way for us to proceed

Thanks so much

Strodder · 06-27-2009, 10:33 AM

Quote:

Originally Posted by joe231

you are making me believe that going POR is the right way for us to proceed

Thanks so much

Hell yes. I could give it another coat, but I don't think it needs it. When I do my truck, I'll make sure I wet everything down to minimize dust, like when I spray paint. I'll also do it early in the morning when there's no wind. You'll see pictures when I do.
After I clean up the frame holes & remove some brackets I be ready. I just have to get the customers cars off the lift.

joe231 · 06-27-2009, 03:00 PM

what are you planning to do for prep before POR'ing the frame?

Strodder · 06-28-2009, 10:35 AM

Quote:

Originally Posted by joe231

what are you planning to do for prep before POR'ing the frame?

One word SANDBLAST. The Studebaker was a pain in the butt doing it with the body on. I got the part of the frame I painted down to bare metal. With my truck it will be a frame off. I want it down to bare metal too before I put the POR-15 on it. But in a cleaner environment. With the Studebaker's frame I used a scrapers, and wire wheel on my hand grinder to get it down to the bare metal. Plus before that I had to get the grease, and dirt off first. POR-15 has a degreaser, and metal prep your supposed to use also.

joe231 · 06-28-2009, 03:24 PM

that is my plan also...guess we are on the same page

Strodder · 06-28-2009, 04:29 PM

Quote:

Originally Posted by joe231

that is my plan also...guess we are on the same page

A page of what book. Customize A Truck For Dummy's...

joe231 · 06-28-2009, 11:58 PM

that sounds like a good book to read

send me your copy when you are done....

Strodder · 06-29-2009, 10:10 AM

That's a book that should be written.

4dranch · 06-29-2009, 11:32 AM

Quote:

Originally Posted by Strodder

That's a book that should be written.

Dennis You write the book and have Mac illustrate it..

Strodder · 06-29-2009, 11:35 AM

Quote:

Originally Posted by 4dranch

Dennis You write the book and have Mac illustrate it..

Like I have that much time to do it. Besides I'm a more hands on guy

protrash64 · 06-29-2009, 03:45 PM

Quote:

Originally Posted by 4dranch

Dennis You write the book and have Mac illustrate it..

.......keep up the good work Strodder; lookin' good.

Strodder · 06-29-2009, 07:55 PM

Quote:

Originally Posted by protrash64

.......keep up the good work Strodder; lookin' good.

Thanks Protrash.

MacAttack · 06-29-2009, 04:30 PM

Quote:

Originally Posted by 4dranch

Dennis You write the book and have Mac illustrate it..

Dude, that isn't a shot about my little thumb sacrificing incident, is it?

Mac.

protrash64 · 06-29-2009, 05:43 PM

All the little pics will be called 'e-Mac-icons'........

joe231 · 07-08-2009, 09:34 PM

Name: popc1.gif
Views: 1673
Size: 2.9 KB

I stole it from another forum

06-26-2009, 10:01 PM	#4
Alan's Classic 1 thing at a time is progress. Join Date: Jun 2007 Location: Ball Ground GA Posts: 5,511	Re: 1965/73 Cheap Build Up Nice work Dennis, as always. __________________ Alan Philippians 2:14-16 Alan's Classic Facebook page. North Georgia Group Project 1965 Vitamin C-10 1995 GMC Sierra K1500 The "Wrecker"

06-26-2009, 12:32 PM	#5
1964C10 Registered User Join Date: Mar 2008 Location: San Marcos, CA Posts: 578	Re: 1965/73 Cheap Build Up Nice looking truck Dennis! I noticed the wiper motor mounted on the firewall, is that stock? If not could you elaborate a little on how you went about doing that? I have been wanting to upgrade mine in my 64. Thanks! __________________ 1964 Fleetside LWB 1995 Yellow Mustang convertible 1996 Camaro Z28 My build thread Looking for help on completing the Disc Brake Upgrade Reference Thread If you didn't build it, you don't really own it

06-26-2009, 01:01 PM	#6
daverod SSN 706 Join Date: Mar 2009 Location: Pocatello Idaho Posts: 3,821	Re: 1965/73 Cheap Build Up When other people do it I've noticed they get a lot more paint all over the place. I wounder if you can spray that stuff? Is it to thick?

06-26-2009, 11:58 PM	#11
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: 1965/73 Cheap Build Up you are making me believe that going POR is the right way for us to proceed Thanks so much __________________ *CHEVY ONLY*

06-27-2009, 03:00 PM	#13
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: 1965/73 Cheap Build Up what are you planning to do for prep before POR'ing the frame? __________________ *CHEVY ONLY*

06-28-2009, 03:24 PM	#15
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: 1965/73 Cheap Build Up that is my plan also...guess we are on the same page __________________ *CHEVY ONLY*

06-28-2009, 11:58 PM	#17
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: 1965/73 Cheap Build Up that sounds like a good book to read send me your copy when you are done.... __________________ *CHEVY ONLY*

06-29-2009, 10:10 AM	#18
Strodder Daring to be Different Join Date: Aug 2008 Location: Hesperia, Ca Posts: 4,499	Re: 1965/73 Cheap Build Up That's a book that should be written. __________________ *Dennis* Check out my 65/73 Cheap Build Thread. http://www.67-72chevytrucks.com/vboa...d.php?t=327644 *KUSTOM RIDES* FACE BOOK PAGE: https://www.facebook.com/groups/291198124258863/ 1965 C-10 Short Bed 350/700r4 2012 Silverado 1500 Crew Cab 2016 Honda Accord w/ 18" rims 2007 Honda Goldwing Trike w/ NAVI 2001 Yamaha Roadstar Indian look alike "Life's journey is not to arrive at the grave safely in a well preserved body, but rather to skid in sideways, totally worn out, shouting "...WOW!...what an amazing ride!" Live Life Passionately!!! [/COLOR] *I AM WE TODD IT, I AM SOFA KING WE TODD IT*

06-29-2009, 05:43 PM	#24
protrash64 Resistance is Futile Join Date: Dec 2006 Location: Mesa,Arizona Posts: 3,520	Re: 1965/73 Cheap Build Up All the little pics will be called 'e-Mac-icons'........ __________________ 64 CHEVY PICK-UP > http://67-72chevytrucks.com/vboard/s...otrash+re-hash 64 CARRYALL >http://67-72chevytrucks.com/vboard/s...=1964+suburban 66 LB >http://67-72chevytrucks.com/vboard/s...d.php?t=427852 STRENGTH/DETERMINATION/MERCILESS/FOREVER .......posted via stationary device

07-08-2009, 09:34 PM	#25
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: 1965/73 Cheap Build Up I stole it from another forum __________________ *CHEVY ONLY*



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.