![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
|
![]() |
#1 |
Registered User
![]() Join Date: Nov 2009
Location: OK
Posts: 274
|
Structures 65 Chevy C10
I've found tons of useful information on this site from browsing the build threads. So I thought I would post my own.
This truck has been in the family since 65 (long before I was born). It is originally a 65 C10 Longbed Fleetside with a 230 straight 6 and 3 spd on the column. ![]() ![]() ![]() In 2003 I got serious (kind of...) about restoring this truck, but I wanted it to be a frame off restoration. ![]() ![]() By 2005 I had the body off and the Frame blasted and powder coated. ![]() ![]() ![]() My first big purchase was a suspension rebuild kit with 2.5" drop spindles, 4" rear drop coils, disc brake conversion and a sway bar kit from Early Classic Enterprises. ![]() ![]() Last edited by structures; 02-06-2010 at 10:59 PM. Reason: relocate pics |
![]() |
![]() |
![]() |
#2 |
Registered User
![]() Join Date: Nov 2009
Location: OK
Posts: 274
|
Re: Structures 65 Chevy C10
After the Frame and Suspension I moved on to the Rear Axle, which is a GM 12 bolt 8.875" ring gear. The original gears were 3.73 but a little rough after setting for 20 some years.
![]() ![]() I had the Rear Axle cleaned, blasted and powder coated here recently. For the rebuild I bought replacement Motive gears, 3.73s, with a Motive rebuild kit and because I just couldn't resist I went with a Eaton posi. ![]() ![]() ![]() ![]() Last edited by structures; 07-29-2010 at 07:34 PM. Reason: pics relocated |
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: Nov 2009
Location: Galt, Calif
Posts: 2,437
|
Re: Structures 65 Chevy C10
Welcome to the site, whats the rest of the plans for this build...
![]()
__________________
`64 C10 vortec 350/350/373 posi `69 RS/SS 350/350/308 `37 Ford 406/350/324 traclock `68 Dart 370/904/323 suregrip |
![]() |
![]() |
![]() |
#4 |
Registered User
![]() Join Date: Nov 2009
Location: OK
Posts: 274
|
Re: Structures 65 Chevy C10
I've got a few irons in the fire because I just recently purchased a 4.8 liter and 4L60e. At the same time I'm still working the rear end. Here is some pics of the engine. It's out of a wrecked 2007 Chevy Silverado with 30,000 miles.
![]() ![]() ![]() Last edited by structures; 07-29-2010 at 07:37 PM. Reason: update what the engine really is |
![]() |
![]() |
![]() |
#5 |
Registered User
Join Date: May 2009
Location: Loganville, Ga.
Posts: 1,408
|
Re: Structures 65 Chevy C10
Nice job, looks great !!!!!!
|
![]() |
![]() |
![]() |
#6 |
Registered User
![]() Join Date: Nov 2009
Location: OK
Posts: 274
|
Re: Structures 65 Chevy C10
I'd like the truck to look stock on the outside and new underneath. LS engine with front discs. Something a little modern with an old look.
|
![]() |
![]() |
![]() |
#7 |
Sunburst C10!!!
Join Date: Jan 2009
Location: Texas
Posts: 2,560
|
Re: Structures 65 Chevy C10
cool build subscribed
__________________
Gage 1967 C10 Shortbed Stepside |
![]() |
![]() |
![]() |
#8 |
Registered User
![]() Join Date: Nov 2009
Location: OK
Posts: 274
|
Re: Structures 65 Chevy C10
Within the last week I've been assembling the Rear Axle and Trailing Arms. I need to make a trip out to the local bolt co for the 100th time as I've been replacing all the hardware on the suspension and I always seem to forget something. Right now it's mostly just mocked in place.
![]() New bushings for the trailing arms. ![]() ![]() ![]() For what it's worth I also took some time to replace some lower quality hardware I bought from the local atwoods. I ran out of the good stuff during ass'y three years ago. So the bolt install on the right has been installed for three years and stored in my garage. The blue coated hardware I replaced from the left installed bolt with some more yellowed zinc hardware. ![]() |
![]() |
![]() |
![]() |
#9 |
1 thing at a time is progress.
Join Date: Jun 2007
Location: Ball Ground GA
Posts: 5,511
|
Re: Structures 65 Chevy C10
Welcome, you are doing a great job!!
__________________
Alan
Philippians 2:14-16 |
![]() |
![]() |
![]() |
#10 |
60-66 Nut
![]() ![]() Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 23,247
|
Re: Structures 65 Chevy C10
Very nice work.....I'm looking forward to more. That is cool that this truck has been in your family since '65.
__________________
Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE |
![]() |
![]() |
![]() |
#11 |
Registered User
Join Date: Apr 2009
Location: Kansas City,MO
Posts: 323
|
Re: Structures 65 Chevy C10
WOW thats gonna be one sick truck man!
I would do the same if i had the cash those 5.3 can be picked up fairly cheap and they are such a great and fast motor! Are you gonna have a wiring harness made for you or....
__________________
96 Burban Sold 99 Z71 Sold 65 C10 Sold 72 C10 Sold 87 Short Bed Lowered Daily Driver ![]() http://s623.photobucket.com/albums/tt314/sswagon/ http://www.chevygmcofkc.org/forums/forum.php |
![]() |
![]() |
![]() |
#12 |
Registerd User
Join Date: Sep 2008
Location: Oklahoma
Posts: 2,118
|
Re: Structures 65 Chevy C10
Welcome. I think you'll like it beter over here. Good luck with your build dude.
|
![]() |
![]() |
![]() |
#13 | |
Registered User
![]() Join Date: Nov 2009
Location: OK
Posts: 274
|
Re: Structures 65 Chevy C10
Guys thanks a lot for the comments. It's December so this is the month of giving and unfortunately that means I can't buy the axles and brake kit yet for the 12 bolt, but I still have a lot to work on anyway. I need to actually disassemble the front spindles, blast them and paint them. My rush to assemble the front end years back has left the calipers and spindles with a nice shade of rust.
Quote:
So I spent some of last week also tearing thru the harness. With a heaping pile of guidance from www.lt1swap.com and some wiring diagrams from autozone I was able to get the idea of what to do. Painless performance sells a harness kit, item 60221, but my harness is in really good shape. I really like painless' fuseblock I wish I could just buy that from them. I might check and see. I was hoping to save some bucks by modding the harness myself and then justify purchasing some sort of tuning software. |
|
![]() |
![]() |
![]() |
#14 |
One foot in front of the other
![]() Join Date: Aug 2008
Location: Parrottsville, TN
Posts: 5,440
|
Re: Structures 65 Chevy C10
Welcome to the site- looks good man. Alot of useful info here.
|
![]() |
![]() |
![]() |
#15 |
Registered User
![]() Join Date: Nov 2009
Location: OK
Posts: 274
|
Re: Structures 65 Chevy C10
Well I was thinking about first trying the adaptor plates and trailblazer SS manifolds. I didn't get the motor mounts for this engine or I would have tried to use them. So you're saying the trailblazer SS manifolds are better than a set of shorty headers?
|
![]() |
![]() |
![]() |
#16 |
Senior Member
![]() Join Date: Nov 2007
Location: Greenville, SC
Posts: 873
|
Re: Structures 65 Chevy C10
I'm just saying that the trailblazer SS / SSR manifolds fit without frame mods. The articles I have read about comparing the cast LS manifolds with headers indicate that the gains from headers are marginal if any. The LS cast manifolds are well designed and matched to the engine.
I tried the CPP style conversion mounts and they interferred with the manifolds, the AC compressor, etc. so I abandoned that and went with the LS stock mounts. Just a note. I mounted my engine 1" forward of the original small block location for rear clearance, and about 5/8" higher for cross member clearance, and 4 degrees tilted down in the back (like stock). TR
__________________
1965 C10 SWB Fleet Two owner LS2 Swap Thread http://67-72chevytrucks.com/vboard/s...d.php?t=413880 |
![]() |
![]() |
![]() |
#17 |
Registered User
![]() Join Date: Nov 2009
Location: OK
Posts: 274
|
Re: Structures 65 Chevy C10
|
![]() |
![]() |
![]() |
#18 |
Registered User
Join Date: Apr 2001
Location: DALLAS,TX
Posts: 21,967
|
Re: Structures 65 Chevy C10
Do you have more info on your brake 'upgrade'?
__________________
67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... Cubic inches is like Indiana Jones with a cheap pistol. |
![]() |
![]() |
![]() |
#19 |
Registered User
![]() Join Date: Nov 2009
Location: OK
Posts: 274
|
Re: Structures 65 Chevy C10
Guys thanks for the comments
Scoti the brake upgrade came from Early Classic. It's nothing that they manufacture, it appeared to me to just be a collection of parts they purchase and ship out from various vendors to match the rear brakes made available in the early 70s (73-87???). Since I went with the 5 lug conversion axles my drums match those of the 73-87 12 bolt rear end. Installing that pivot lug at the top was a real pain in the rear. I wish I would've just cleaned up my existing backing plate and upgraded the shoes and drum. I think that would be possible.
__________________
Robert 1965 Chevy C10 http://67-72chevytrucks.com/vboard/s...d.php?t=374373 1997 Chevy K2500 6.5 diesel |
![]() |
![]() |
![]() |
#20 | |
60-66 Nut
![]() ![]() Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 23,247
|
Re: Structures 65 Chevy C10
That brake conversion is likely nothing other than replacement parts for the 2 1/2" wide rear brakes that GM went to in around 1975-76. Those parts can be found either in a wrecking yard or at your local auto parts supplier. Nonetheless yours looks very nice.
Quote:
__________________
Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE Last edited by Captainfab; 04-04-2010 at 11:02 PM. |
|
![]() |
![]() |
![]() |
#21 |
Registered User
![]() Join Date: Nov 2009
Location: OK
Posts: 274
|
Re: Structures 65 Chevy C10
It's been a while since I updated my build. I haven't got a whole lot done, b/c I've been plagued by home improvements. So lately I installed the Engine, worked a little on the steering and picked up the Cab from my parents and brought it to the house to start some body work. Before I get on the cab though I want to get the transmission in.
![]() ![]() Picture of the steering arm and tie rods ![]() I blasted the steering arm and then painted it along with the new moog steering parts. ![]() Last night I got a wild hair and went out to my parents and had my dad help load up the cab on my trailer. ![]() By the time I got home the only strap that was still holding was the middle strap. The cross straps were mostly loose! I was driving slow, but I really should have stopped down the road and checked em. ![]()
__________________
Robert 1965 Chevy C10 http://67-72chevytrucks.com/vboard/s...d.php?t=374373 1997 Chevy K2500 6.5 diesel |
![]() |
![]() |
![]() |
#22 |
Official Site Guitar Shredder
Join Date: May 2006
Location: Oz
Posts: 3,955
|
Re: Structures 65 Chevy C10
looks awesome..Great work......Keep it up and good luck
|
![]() |
![]() |
![]() |
#23 |
Registered User
![]() Join Date: Nov 2009
Location: OK
Posts: 274
|
Re: Structures 65 Chevy C10
Today I put the upgrade brake kit together and installed the brakes along with the axles on the 12 Bolt. It was easy to get the brake assembled once I figured out where all the arms and springs went. Spent about an hour and a half piecing together the right side and then 15 minutes for the left.
![]() ![]() ![]() Seal installed the correct way!! ![]() ![]() ![]() Last edited by structures; 07-29-2010 at 07:42 PM. |
![]() |
![]() |
![]() |
#24 |
Registered User
Join Date: Apr 2009
Location: Dawson, Ga
Posts: 499
|
Re: Structures 65 Chevy C10
Looks awesome I can't wait till I get to start reassembling my frame. I still a got a lot of metal work to do before I get there.
Anyway Welcome and I can't wait to see more. |
![]() |
![]() |
![]() |
#25 |
Registered User
![]() Join Date: Nov 2009
Location: OK
Posts: 274
|
Re: Structures 65 Chevy C10
I decided to forgo the adapter plate method for the engine mounts and picked up a set of ECE mounts. Just got them in the mail today. Man they sure are nice. I'm glad I bought them. I haven't been able to get out to my parents house and rob the auto tranny cross member from my donor 65 because of the weather. Given the pounding we're taking in the Tulsa area it may be a little while longer.
![]() Last edited by structures; 04-05-2010 at 04:56 PM. |
![]() |
![]() |
![]() |
Bookmarks |
|
|