1964 Caprick-up = (C10+SWB)*(94 Caprice 9C1+LT1) - Page 8 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

E911manager · 02-26-2012, 09:20 PM

Here is the brake pedal assembly. I hooked it all up and have a full pedal...

E911manager · 02-26-2012, 09:24 PM

Radiator top mounts.. I think the brackets are off a mid 80's chevy pickup. The local pickup salvage yard owner gave them to me.. Not quite done. Need some more clean up.. I will have to modify the front core panel things to go around them..

E911manager · 02-26-2012, 09:30 PM

Modified the steering column bracket and added about 2 inches to it in order to push the column down far enough to clear the brake booster.

I also cut a hole in firewall behind the front passenger tire. Modifying the inner fender wheels to accommodate the wiring harness and fuse block will be needed. I also plan to make a cover under the inner fender and around the wiring to protect it. Not that I plan on driving in the rain and mud but better to plan and be safe then not and be sorry..

E911manager · 02-26-2012, 10:02 PM

Grounded the cab, frame and core support today. Welded in 2 grounds on either side of the interior of the cab. I ran all the wiring and hooked up a battery and the computer.

Turned it over and it tried to start. Had to make a quick frame ground for the rear harness and then the fuel pump started working. Started right up.. Purred like a kitten.......

I had a goal to hear it run by March 1st.. Check.. Now for inner fenders and finish up mocking up the front end so i can tear it apart again and paint the cab...

McMurphy · 02-26-2012, 10:11 PM

Good to come in on a goal ahead of time!!

Congrats, cannot wait to see how you tackle the rest of this symbiosis build !!

66-PMD-GMC · 02-26-2012, 10:35 PM

Quote:

Originally Posted by E911manager

Modifying the inner fender wheels to accommodate the wiring harness and fuse block will be needed. I also plan to make a cover under the inner fender and around the wiring to protect it. Not that I plan on driving in the rain and mud but better to plan and be safe then not and be sorry..

You could always box in the wiring under the inner fender and make a door on top to service it if it ever needed it. That way it would look stockish... not that you are trying to do that

just an idea.

E911manager · 02-27-2012, 06:28 PM

Quote:

Originally Posted by 66-PMD-GMC

You could always box in the wiring under the inner fender and make a door on top to service it if it ever needed it. That way it would look stockish... not that you are trying to do that

just an idea.

That is kind of the plan. But have the access from under the fender and keep the top side clean... I also want to put the AC and heater lines under the inner fender too..

I havent gotten my "good" inner fenders so I can start manipulating them to fit the frame... I hope to get those this weekend, they are currently attached to a pickup in the middle of a thorn patch about a mile off any road...

E911manager · 02-27-2012, 06:35 PM

Quote:

Originally Posted by McMurphy

Good to come in on a goal ahead of time!!

Congrats, cannot wait to see how you tackle the rest of this symbiosis build !!

I didnt think I would make this one. With a 55 gallon drum full of wiring, it appeared to be unobtainable.. Next goal, front end fab work done and driving under own power by May 1st. Then body work and tear down for paint.

But I have a BBW kit coming so that has to be worked in there before the next goal.

For those scratching your head (like me)...
sym·bi·o·sis (smb-ss, -b-)
n. pl. sym·bi·o·ses (-sz)
1. Biology A close, prolonged association between two or more different organisms of different species that may, but does not necessarily, benefit each member.
2. A relationship of mutual benefit or dependence.

**Dieselwrencher** · 02-27-2012, 06:56 PM

Great progress and congrats on hearing it run!

**66ChevyMax** · 02-29-2012, 01:05 PM

Congrats on getting that thing started, keep up the great work!

E911manager · 03-05-2012, 10:47 AM

I go the oil cooler and trans cooler remounted and plumbed in. Made a shifter linkage and installed it. Works well.. Actually, started it and moved it a few inches forward and backward.. Worked on a cab corner and decided that they are both going to need to be totally replaced. Pulled the bed back off and am starting to look for a place to put the battery. Didn't get a chance to go pickup up my inner fenders (complete 65 truck) and it looks like a lot of needed rain later in the week so that may be put on hold for a couple of weeks.. I am just dreading it..

E911manager · 03-09-2012, 11:14 PM

I drove the caprickup around the yard today.. I tried to upload a clip but haven't figured it out...

Frizzle Fry · 03-09-2012, 11:28 PM

Upload it to YouTube, then post the link here.
Posted via Mobile Device

E911manager · 03-09-2012, 11:30 PM

Here is a short clip... if it works.

Caprickup moves under its own power - YouTube

E911manager · 03-09-2012, 11:36 PM

Sweet it worked.. Does anyone know where I can get a seat cover for my 5 gallon bucket seat?? Oh and yes my throttle is a broken cable that is located just outside the window....

the first time I started it the remote power steering reservoir was upside down the first time I started it. Now it is noisy.. Maybe some Lucas will clear it up....

E911manager · 03-09-2012, 11:48 PM

Quote:

Originally Posted by Frizzle Fry

Upload it to YouTube, then post the link here.
Posted via Mobile Device

Thanks Frizzle Fry.
Posted via Mobile Device

Frizzle Fry · 03-10-2012, 11:55 AM

on the bucket! Nice dude! That's gotta be a great feeling. Looking forward to that day myself.

**66ChevyMax** · 03-10-2012, 12:04 PM

That was classic. Congrats!
Posted via Mobile Device

C@rnut001 · 03-10-2012, 05:12 PM

Congrats man that is so great to see! Keep it up and keep the updates coming. It is neat to see it moving under its own power and the "bucket" seat is priceless as well as the throttle!

niterider65 · 03-10-2012, 09:20 PM

Dang a five gallon bucket is better than old apple box any day.. your not sitting on spliters

:.
Looking good keep up the good work .

Bill

E911manager · 03-12-2012, 02:16 PM

Thanks guys, it is pretty exciting to get it to move.. I just want to drive it around the neighborhood and see how fast the cops come...

64shortbox · 03-12-2012, 11:38 PM

Congrats on your first drive. No matter how short - that first drive sure gets you motivated to keep going. I can't believe how much you're getting accomplished in such a short time. Great work!!!!!!!!

Bears63 · 03-13-2012, 11:54 AM

That video is awesome! Made me chuckle seeing the bucket and throttle, but it doesn't matter, you had it running and moving on it's own. You are moving right along on this and I hope the weather works with you a lot so you can get her finished quickly. Looking forward to seeing the final product.

E911manager · 03-16-2012, 11:08 PM

Thanks Bears and Shortbox... Waiting for inner fenders then I can put it together and hope it fits together...

E911manager · 03-25-2012, 10:26 PM

Installed the throttle cable and set the bed in place.. Took off the inner fenders from another donor truck and started to mock them up to fit the frame and bigger radiator.

Then I did a little "grass slinging" in the back yard. I almost fell off my bucket!!!

1964 Caprick-up - YouTube

02-26-2012, 09:20 PM	#176
E911manager Registered User Join Date: Oct 2011 Location: Blanchard Oklahoma Posts: 424	*Re: 1964 Caprick-up = (C10+SWB)(94 Caprice 9C1+LT1) Here is the brake pedal assembly. I hooked it all up and have a full pedal... Attached Images __________________ My Build** CAPRICKUP 1964 Chevy SWB on a 94 Caprice http://67-72chevytrucks.com/vboard/s...d.php?t=492640

02-26-2012, 09:24 PM	#177
E911manager Registered User Join Date: Oct 2011 Location: Blanchard Oklahoma Posts: 424	*Re: 1964 Caprick-up = (C10+SWB)(94 Caprice 9C1+LT1) Radiator top mounts.. I think the brackets are off a mid 80's chevy pickup. The local pickup salvage yard owner gave them to me.. Not quite done. Need some more clean up.. I will have to modify the front core panel things to go around them.. Attached Images __________________ My Build** CAPRICKUP 1964 Chevy SWB on a 94 Caprice http://67-72chevytrucks.com/vboard/s...d.php?t=492640

02-26-2012, 09:30 PM	#178
E911manager Registered User Join Date: Oct 2011 Location: Blanchard Oklahoma Posts: 424	*Re: 1964 Caprick-up = (C10+SWB)(94 Caprice 9C1+LT1) Modified the steering column bracket and added about 2 inches to it in order to push the column down far enough to clear the brake booster. I also cut a hole in firewall behind the front passenger tire. Modifying the inner fender wheels to accommodate the wiring harness and fuse block will be needed. I also plan to make a cover under the inner fender and around the wiring to protect it. Not that I plan on driving in the rain and mud but better to plan and be safe then not and be sorry.. Attached Images __________________ My Build** CAPRICKUP 1964 Chevy SWB on a 94 Caprice http://67-72chevytrucks.com/vboard/s...d.php?t=492640

02-26-2012, 10:02 PM	#179
E911manager Registered User Join Date: Oct 2011 Location: Blanchard Oklahoma Posts: 424	*Re: 1964 Caprick-up = (C10+SWB)(94 Caprice 9C1+LT1) Grounded the cab, frame and core support today. Welded in 2 grounds on either side of the interior of the cab. I ran all the wiring and hooked up a battery and the computer. Turned it over and it tried to start. Had to make a quick frame ground for the rear harness and then the fuel pump started working. Started right up.. Purred like a kitten....... I had a goal to hear it run by March 1st.. Check.. Now for inner fenders and finish up mocking up the front end so i can tear it apart again and paint the cab... __________________ My Build** CAPRICKUP 1964 Chevy SWB on a 94 Caprice http://67-72chevytrucks.com/vboard/s...d.php?t=492640

02-26-2012, 10:11 PM	#180
McMurphy Registered User Join Date: Sep 2011 Location: Tacoma, WA Posts: 2,425	*Re: 1964 Caprick-up = (C10+SWB)(94 Caprice 9C1+LT1) Good to come in on a goal ahead of time!! Congrats, cannot wait to see how you tackle the rest of this symbiosis build !! __________________ Michael McMurphy My 66 Stepside My 64 Tow Truck My 66 Tempest Table Of Contents Added to Page1**

02-27-2012, 06:56 PM	#184
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,139	*Re: 1964 Caprick-up = (C10+SWB)(94 Caprice 9C1+LT1) Great progress and congrats on hearing it run! __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project Tired of spark plugs? Check this out.**

02-29-2012, 01:05 PM	#185
66ChevyMax Senior Member Join Date: Oct 2011 Location: Wolfforth, Texas Posts: 976	*Re: 1964 Caprick-up = (C10+SWB)(94 Caprice 9C1+LT1) Congrats on getting that thing started, keep up the great work! __________________ Craig 1966 Chevrolet C10 - Supercharged LS3 1968 Chevrolet Camaro 1957 Chevrolet 2dr Hardtop "It makes sence if you don't think about it" Mesquite 1966 C10 - LS3 W/ Air Ride** http://67-72chevytrucks.com/vboard/s...=1#post4989763

03-05-2012, 10:47 AM	#186
E911manager Registered User Join Date: Oct 2011 Location: Blanchard Oklahoma Posts: 424	*Re: 1964 Caprick-up = (C10+SWB)(94 Caprice 9C1+LT1) I go the oil cooler and trans cooler remounted and plumbed in. Made a shifter linkage and installed it. Works well.. Actually, started it and moved it a few inches forward and backward.. Worked on a cab corner and decided that they are both going to need to be totally replaced. Pulled the bed back off and am starting to look for a place to put the battery. Didn't get a chance to go pickup up my inner fenders (complete 65 truck) and it looks like a lot of needed rain later in the week so that may be put on hold for a couple of weeks.. I am just dreading it.. __________________ My Build** CAPRICKUP 1964 Chevy SWB on a 94 Caprice http://67-72chevytrucks.com/vboard/s...d.php?t=492640

03-09-2012, 11:14 PM	#187
E911manager Registered User Join Date: Oct 2011 Location: Blanchard Oklahoma Posts: 424	*Re: 1964 Caprick-up = (C10+SWB)(94 Caprice 9C1+LT1) I drove the caprickup around the yard today.. I tried to upload a clip but haven't figured it out... __________________ My Build** CAPRICKUP 1964 Chevy SWB on a 94 Caprice http://67-72chevytrucks.com/vboard/s...d.php?t=492640

03-09-2012, 11:28 PM	#188
Frizzle Fry Registered User Join Date: Aug 2005 Location: Hillsboro Oregon Posts: 6,449	*Re: 1964 Caprick-up = (C10+SWB)(94 Caprice 9C1+LT1)** Upload it to YouTube, then post the link here. Posted via Mobile Device

03-09-2012, 11:36 PM	#190
E911manager Registered User Join Date: Oct 2011 Location: Blanchard Oklahoma Posts: 424	*Re: 1964 Caprick-up = (C10+SWB)(94 Caprice 9C1+LT1) Sweet it worked.. Does anyone know where I can get a seat cover for my 5 gallon bucket seat?? Oh and yes my throttle is a broken cable that is located just outside the window.... the first time I started it the remote power steering reservoir was upside down the first time I started it. Now it is noisy.. Maybe some Lucas will clear it up.... __________________ My Build** CAPRICKUP 1964 Chevy SWB on a 94 Caprice http://67-72chevytrucks.com/vboard/s...d.php?t=492640

03-10-2012, 11:55 AM	#192
Frizzle Fry Registered User Join Date: Aug 2005 Location: Hillsboro Oregon Posts: 6,449	*Re: 1964 Caprick-up = (C10+SWB)(94 Caprice 9C1+LT1)** on the bucket! Nice dude! That's gotta be a great feeling. Looking forward to that day myself.

03-10-2012, 12:04 PM	#193
66ChevyMax Senior Member Join Date: Oct 2011 Location: Wolfforth, Texas Posts: 976	*Re: 1964 Caprick-up = (C10+SWB)(94 Caprice 9C1+LT1)** That was classic. Congrats! Posted via Mobile Device __________________ Craig 1966 Chevrolet C10 - Supercharged LS3 1968 Chevrolet Camaro 1957 Chevrolet 2dr Hardtop "It makes sence if you don't think about it" Mesquite 1966 C10 - LS3 W/ Air Ride http://67-72chevytrucks.com/vboard/s...=1#post4989763

03-10-2012, 05:12 PM	#194
C@rnut001 Registered User Join Date: Dec 2011 Location: Alaska Posts: 405	*Re: 1964 Caprick-up = (C10+SWB)(94 Caprice 9C1+LT1) Congrats man that is so great to see! Keep it up and keep the updates coming. It is neat to see it moving under its own power and the "bucket" seat is priceless as well as the throttle! __________________ C@rnut001 (Owen) Alaskan Members Check In** http://67-72chevytrucks.com/vboard/s...22#post5094422 http://67-72chevytrucks.com/vboard/s...18#post6778618

03-10-2012, 09:20 PM	#195
niterider65 Registered User Join Date: Jun 2011 Location: colleyville tx Posts: 624	*Re: 1964 Caprick-up = (C10+SWB)(94 Caprice 9C1+LT1)** Dang a five gallon bucket is better than old apple box any day.. your not sitting on spliters :. Looking good keep up the good work . Bill



Register or Log In To remove these advertisements.

03-12-2012, 02:16 PM	#196
E911manager Registered User Join Date: Oct 2011 Location: Blanchard Oklahoma Posts: 424	*Re: 1964 Caprick-up = (C10+SWB)(94 Caprice 9C1+LT1) Thanks guys, it is pretty exciting to get it to move.. I just want to drive it around the neighborhood and see how fast the cops come... __________________ My Build** CAPRICKUP 1964 Chevy SWB on a 94 Caprice http://67-72chevytrucks.com/vboard/s...d.php?t=492640

03-12-2012, 11:38 PM	#197
64shortbox Registered User Join Date: Jan 2011 Location: Tulare, CA Posts: 733	*Re: 1964 Caprick-up = (C10+SWB)(94 Caprice 9C1+LT1)** Congrats on your first drive. No matter how short - that first drive sure gets you motivated to keep going. I can't believe how much you're getting accomplished in such a short time. Great work!!!!!!!!

03-13-2012, 11:54 AM	#198
Bears63 ...just another truck junkie.. Join Date: May 2009 Location: Watertown, SD Posts: 698	*Re: 1964 Caprick-up = (C10+SWB)(94 Caprice 9C1+LT1)** That video is awesome! Made me chuckle seeing the bucket and throttle, but it doesn't matter, you had it running and moving on it's own. You are moving right along on this and I hope the weather works with you a lot so you can get her finished quickly. Looking forward to seeing the final product. __________________ Mike "Bear" Shea

03-16-2012, 11:08 PM	#199
E911manager Registered User Join Date: Oct 2011 Location: Blanchard Oklahoma Posts: 424	*Re: 1964 Caprick-up = (C10+SWB)(94 Caprice 9C1+LT1) Thanks Bears and Shortbox... Waiting for inner fenders then I can put it together and hope it fits together... __________________ My Build** CAPRICKUP 1964 Chevy SWB on a 94 Caprice http://67-72chevytrucks.com/vboard/s...d.php?t=492640

Register or Log In To remove these advertisements.