TX Parting These Three Trucks - Page 8 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**gmc 2500 4x4** · 06-12-2012, 03:32 PM

i'll take it greg<<<thanx 4 posting pics

**DeadheadNM** · 06-12-2012, 07:35 PM

Greg - Appreciate the AC vent belts. Thanks, Pete

**DaHos** · 06-12-2012, 09:47 PM

Out on Cab, shipping on grill to 48867 and condition details. Looking for patina not rot, top bar good?

lynnfield · 06-13-2012, 01:39 PM

clb1024, They are 50 1/4" approx. from center to center

lynnfield · 06-13-2012, 01:52 PM

DaHos, the top bar is straight, patina is good, and there is no rot. The back side has the coating flaking off and some surface rust, but it doesn't affect the front. I would hit it with some scotch brite, or lightly with a wire wheel, paint it black, bolt it on and go.

lynnfield · 06-13-2012, 01:58 PM

More grill pics

lynnfield · 06-13-2012, 02:02 PM

DaHos, shipping is $137 fedex or $78 greyhound. I picked up a box from a local body shop today that I think this will safely ship in. Thanks, Greg

**DaHos** · 06-13-2012, 10:58 PM

Quote:

Originally Posted by lynnfield

DaHos, shipping is $137 fedex or $78 greyhound. I picked up a box from a local body shop today that I think this will safely ship in. Thanks, Greg

OUCH !!!! another dead deal due to shipping $$$...........thanks for trying. D'

lynnfield · 06-14-2012, 12:32 AM

DaHos, I understand, it's just hard to ship an oversize package that distance and keep it reasonable. The fees for the "oversize" is what kills it, sorry.

clb1024, no problem, thanks for letting me know

68 four on the floor, your E check cleared today. I'll get the trim pieces out tomorrow.

lynnfield · 06-14-2012, 01:23 PM

425HP409, pics of the parts you asked about. $170 shipped for it all. That's the heat shield & tube, air cleaner, carb & brackets, cowl vent actuator, and 2 sets of passenger kick panel vents. Thanks, Greg

lynnfield · 06-14-2012, 06:30 PM

72SWBChevy, I have another one, make it an even $45 and I'll ship them together. Greg

72SWBChevy · 06-14-2012, 06:46 PM

Quote:

Originally Posted by lynnfield

72SWBChevy, I have another one, make it an even $45 and I'll ship them together. Greg

sounds good, pls adv payment you wud like.

**425HP409** · 06-14-2012, 07:21 PM

I will take all of the items we discussed to include both of the carb rear brackets as shown in the picture. pm me payment info
Charles

72SWBChevy · 06-15-2012, 09:45 PM

Quote:

Originally Posted by 72SWBChevy

sounds good, pls adv payment you wud like.

Greg I have sent payment!! Tks.

chewychevy67 · 06-15-2012, 11:06 PM

hey greg being that i will have a larger parcel coming from you when the diff parts iare ready i need a auto transmission crossmember. dont need the top parts just the long bottom. i need one like the top one in the picture with the curves for the exhaust pipes. the bottom one is from my 67 and i want the exhaust to get up as high as i can get it. Rod.

poncyj · 06-16-2012, 08:43 AM

Gregg, can you send pics of the dash and pillars to edmondjjr@yahoo.com?

lynnfield · 06-15-2012, 12:18 AM

If I have missed anything or anyone to this point, please let me know. The thread has gotten long and at times it's hard to keep up with it all. Thanks, Greg

lynnfield · 06-16-2012, 04:25 PM

BigRed76, got it

72SWBChevy, got it

chewychevy67, I should be able to help you with that.

poncyj, I will try to get pics sent to you by the end of the weekend

To all, I am trying to get parts pulled and packaged so they can go out either monday or tuesday. I have had a few things come up here and there that have slowed me down a bit, and with tomorrow being fathers day, I promised I would slow down and spend some time with the kids. Hope everyone understands, and I will get it done. Thanks, Greg

missinfishin10 · 06-16-2012, 08:40 PM

Received the sway bar today Greg.

Thank you!

Jeff

71on20s · 06-18-2012, 12:48 AM

Do you have any cabs left?
Posted via Mobile Device
Posted via Mobile Device

**68 Four on the Floor** · 06-18-2012, 08:34 PM

Got my trim today packaged like a boss.Thanks

lynnfield · 06-18-2012, 08:42 PM

71on20s, sent you a PM on what I have for cabs

orange 69, no worries, I understand

Leroy-B1, I have listed the blue tailgate in a different thread, I offered it to you shipped, that offer still stands

Blue tailgate from this thread listed here: http://67-72chevytrucks.com/vboard/s...d.php?t=529431

BigRed76, 72SWBChevy, 425HP409, your packages made it out today.

Thanks, Greg

71on20s · 06-18-2012, 09:04 PM

I'm interested in the 67 cab as a whole might be able to come out fri to check it out
Posted via Mobile Device
Posted via Mobile Device

72SWBChevy · 06-18-2012, 09:59 PM

Quote:

Originally Posted by lynnfield

71on20s, sent you a PM on what I have for cabs

orange 69, no worries, I understand

Leroy-B1, I have listed the blue tailgate in a different thread, I offered it to you shipped, that offer still stands

Blue tailgate from this thread listed here: http://67-72chevytrucks.com/vboard/s...d.php?t=529431

BigRed76, 72SWBChevy, 425HP409, your packages made it out today.

Thanks, Greg

thanks.

nate_g_2003 · 06-19-2012, 11:26 AM

Would you be able to grab any more pics of the seat for me, please?

06-12-2012, 03:32 PM	#1
gmc 2500 4x4 Senior Member Join Date: Mar 2012 Location: ripley ny Posts: 2,903	Re: Parting These Three Trucks i'll take it greg<<<thanx 4 posting pics

06-12-2012, 07:35 PM	#2
DeadheadNM Carpe manana Join Date: Dec 2010 Location: Eau Claire, WI Posts: 12,367	Re: Parting These Three Trucks Greg - Appreciate the AC vent belts. Thanks, Pete __________________ 1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547 1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308 Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland

06-12-2012, 09:47 PM	#3
DaHos Senior Member Join Date: Sep 2011 Location: Owosso, Michigan Posts: 2,855	Re: Parting These Three Trucks Out on Cab, shipping on grill to 48867 and condition details. Looking for patina not rot, top bar good? __________________ 1967 C10 SWB Owner - Rustbelt Restorations

06-13-2012, 01:39 PM	#4
lynnfield The Waco Kid Join Date: Oct 2009 Location: Waco, TX. Posts: 1,781	Re: Parting These Three Trucks clb1024, They are 50 1/4" approx. from center to center

06-13-2012, 01:52 PM	#5
lynnfield The Waco Kid Join Date: Oct 2009 Location: Waco, TX. Posts: 1,781	Re: Parting These Three Trucks DaHos, the top bar is straight, patina is good, and there is no rot. The back side has the coating flaking off and some surface rust, but it doesn't affect the front. I would hit it with some scotch brite, or lightly with a wire wheel, paint it black, bolt it on and go. Attached Images Last edited by lynnfield; 06-13-2012 at 04:03 PM.

06-13-2012, 01:58 PM	#6
lynnfield The Waco Kid Join Date: Oct 2009 Location: Waco, TX. Posts: 1,781	Re: Parting These Three Trucks More grill pics Attached Images

06-13-2012, 02:02 PM	#7
lynnfield The Waco Kid Join Date: Oct 2009 Location: Waco, TX. Posts: 1,781	Re: Parting These Three Trucks DaHos, shipping is $137 fedex or $78 greyhound. I picked up a box from a local body shop today that I think this will safely ship in. Thanks, Greg

06-14-2012, 12:32 AM	#9
lynnfield The Waco Kid Join Date: Oct 2009 Location: Waco, TX. Posts: 1,781	Re: Parting These Three Trucks DaHos, I understand, it's just hard to ship an oversize package that distance and keep it reasonable. The fees for the "oversize" is what kills it, sorry. clb1024, no problem, thanks for letting me know 68 four on the floor, your E check cleared today. I'll get the trim pieces out tomorrow.

06-14-2012, 01:23 PM	#10
lynnfield The Waco Kid Join Date: Oct 2009 Location: Waco, TX. Posts: 1,781	Re: Parting These Three Trucks 425HP409, pics of the parts you asked about. $170 shipped for it all. That's the heat shield & tube, air cleaner, carb & brackets, cowl vent actuator, and 2 sets of passenger kick panel vents. Thanks, Greg Attached Images

06-14-2012, 06:30 PM	#11
lynnfield The Waco Kid Join Date: Oct 2009 Location: Waco, TX. Posts: 1,781	Re: Parting These Three Trucks 72SWBChevy, I have another one, make it an even $45 and I'll ship them together. Greg

06-14-2012, 07:21 PM	#13
425HP409 425hp409 Join Date: Oct 2008 Location: Prosper Texas Posts: 841	Re: Parting These Three Trucks I will take all of the items we discussed to include both of the carb rear brackets as shown in the picture. pm me payment info Charles __________________ Charles 68 SWB, Dad bought new, now 396 & factory ac 64 Impala SS, 409 425HP, 4 speed AC 64 Bel Air Wagon, 400 Small Block 57 Bel Air all original 283 w/Factory Air 77 GMC Sprint, 454/425HP 67 Olds 442, all original 90 ZR1 Corvette

06-15-2012, 11:06 PM	#15
chewychevy67 Registered User Join Date: Jan 2010 Location: Here Posts: 5,482	Re: Parting These Three Trucks hey greg being that i will have a larger parcel coming from you when the diff parts iare ready i need a auto transmission crossmember. dont need the top parts just the long bottom. i need one like the top one in the picture with the curves for the exhaust pipes. the bottom one is from my 67 and i want the exhaust to get up as high as i can get it. Rod. Attached Images

06-16-2012, 08:43 AM	#16
poncyj Registered User Join Date: Apr 2010 Location: summerville, sc Posts: 59	Re: Parting These Three Trucks Gregg, can you send pics of the dash and pillars to edmondjjr@yahoo.com?

06-15-2012, 12:18 AM	#17
lynnfield The Waco Kid Join Date: Oct 2009 Location: Waco, TX. Posts: 1,781	Re: Parting These Three Trucks If I have missed anything or anyone to this point, please let me know. The thread has gotten long and at times it's hard to keep up with it all. Thanks, Greg

06-16-2012, 04:25 PM	#18
lynnfield The Waco Kid Join Date: Oct 2009 Location: Waco, TX. Posts: 1,781	Re: Parting These Three Trucks BigRed76, got it 72SWBChevy, got it chewychevy67, I should be able to help you with that. poncyj, I will try to get pics sent to you by the end of the weekend To all, I am trying to get parts pulled and packaged so they can go out either monday or tuesday. I have had a few things come up here and there that have slowed me down a bit, and with tomorrow being fathers day, I promised I would slow down and spend some time with the kids. Hope everyone understands, and I will get it done. Thanks, Greg



Register or Log In To remove these advertisements.

06-16-2012, 08:40 PM	#19
missinfishin10 Amazed Member Join Date: May 2010 Location: Dahlonega Georgia Posts: 486	Re: Parting These Three Trucks Received the sway bar today Greg. Thank you! Jeff __________________ 71 LWB Fleetside 1950 3100 Original Project!

06-18-2012, 12:48 AM	#20
71on20s Registered User Join Date: Jan 2004 Location: Houston, TX Posts: 52	Re: Parting These Three Trucks Do you have any cabs left? Posted via Mobile Device Posted via Mobile Device

06-18-2012, 08:34 PM	#21
68 Four on the Floor Senior Member Join Date: Jun 2011 Location: Washburn, IA Posts: 600	Re: Parting These Three Trucks Got my trim today packaged like a boss.Thanks

06-18-2012, 08:42 PM	#22
lynnfield The Waco Kid Join Date: Oct 2009 Location: Waco, TX. Posts: 1,781	Re: Parting These Three Trucks 71on20s, sent you a PM on what I have for cabs orange 69, no worries, I understand Leroy-B1, I have listed the blue tailgate in a different thread, I offered it to you shipped, that offer still stands Blue tailgate from this thread listed here: http://67-72chevytrucks.com/vboard/s...d.php?t=529431 BigRed76, 72SWBChevy, 425HP409, your packages made it out today. Thanks, Greg

06-18-2012, 09:04 PM	#23
71on20s Registered User Join Date: Jan 2004 Location: Houston, TX Posts: 52	Re: Parting These Three Trucks I'm interested in the 67 cab as a whole might be able to come out fri to check it out Posted via Mobile Device Posted via Mobile Device

06-19-2012, 11:26 AM	#25
nate_g_2003 Registered User Join Date: Jun 2011 Location: Gregory, TX Posts: 413	Re: Parting These Three Trucks Would you be able to grab any more pics of the seat for me, please? __________________ -Nathan- 1972 GMC K2500 Suburban "The Project" 2013 GMC Sierra 1500 SLT Z71 "The Daily Driver" 2005 Ford F150 Lariat SCrew 2WD "The Daily Driver" SOLD 1995 GMC Sierra C1500 SLE "The Daily Driver"SOLD 2003 Ford Ranger Edge 2DSC 2WD Flareside "The Daily Driver/Project"SOLD

Register or Log In To remove these advertisements.