Show off your Wheels

[Old Tin Tarzan]

Set of Chromies with bullet center caps, not flash but suit the patina of the truck

[Atomsplitter]

[Dan in Pasadena]

Anyone know whose truck this is and what wheels he has?

I kinda assume they're typical Torq Thrust II's but I'm wondering the size, width, back space?

[blazerman scott]

My wheels.

[tiddlar]

18x8 20x15 rushforth rated x

[dwcsr]

These are American Racing VN805 Boulevard 18"

[aray327]

Intro with 275/35/18 front. And 275/35/19 rear
C4 front and rear. LS6/4L60e. Long way from finished

[rtinniste]

Hmm didn't see any supremes
here's mine tire was just a trashed tire for mock up I got new rubber over the weekend I'll post something better once my cab goes on again. I have bullet caps but I'm planning on 3 bar knock offs

front 15x8 3.625" backspace 205/70/15 with a 1" spacer
rear 15x8 2" backspace 205/75/15

[yoshi]

Millo's & mine

[bowt1ed]

Originally Posted by Dan in Pasadena

Anyone know whose truck this is and what wheels he has?

I kinda assume they're typical Torq Thrust II's but I'm wondering the size, width, back space?

I'm with Dan - sure would like to know the particulars (backspace, etc.) on these. Just what I'm looking for.

Cheers, Jim

[mphudak]

Got a delivery from Fedex today.
-Before is 275/60r15's on 15x8 chrome smoothies w/3" BS.
-New is 15x7 black smoothie's 4" BS on 205/75r15 1.2" ww frt and 235/75r15 1.5" ww rear. Prob could of gone a little bigger in front but very happy. Still need to clean the blue off, mount the trim rings and will have caps delivered tomorrow.
Shameless plug for peformanceplustire.com. Amazing deal on wheels/tires mounted/balanced/shipped coast to coast in less then a week.

[1952ssr]

Boss 338's w/ 3 spoke spinners
18x8" front 225/40/18
20x10" rear 255/35/20

Future plans replace fronts with 20x8's or 20x10's

[mphudak]

Got the tires cleaned up today and caps modified to fit. Unfortunately I have some motor issues and couldn't pull it out of the garage.

[Coupeguy2001]

I bought a set of 1996 Impala SS wheels for $200 with tires.


Don't look too bad on this old dog.

[Advanced Design]

Originally Posted by mphudak

Got the tires cleaned up today and caps modified to fit. Unfortunately I have some motor issues and couldn't pull it out of the garage.

Looks great! You have a really nice Burb there.

[Shinysideup]

Coker classic 225/75/15 , 8"wheel

[Dan in Pasadena]

Originally Posted by Coupeguy2001

I bought a set of 1996 Impala SS wheels for $200 with tires.


Don't look too bad on this old dog.

Coupe guy, I really, really like those on your truck. VERY nice. I don't know if it's that your truck is a long bed or what but they look great. Congrats. Screaming deal too!

[58CameoAZ]

[QUOTE=Coupeguy2001;7537595]I bought a set of 1996 Impala SS wheels for $200 with tires.


Don't look too bad on this old dog.
[/QUOTE

Coupe Guy, i agree with Dan, I really like the look on your truck! Good looking
Long Bed,
Allen

[chincha805]

i found this site with this info, thought it would help.
rimsntires.com/specspro
go to size comparer under tools on the left side of page, you can mess with the rim tire and offsets .

[Coupeguy2001]

Thanks Guys,
I accidentally found the ad for the wheels on craigslist and went for it.
The guy I got the wheels from bolted them on his truck, and got about a foot when he realized they were rubbing on his ball joints, or tie rods, so I had a little cleanup to do on the inside of the wheels.
So since he couldn't use them, he flipped them, and I ended up with them.

Be aware, the lugs are 5 on 5 instead of 4 3/4.

I have a 72 chevy truck rear end under it, and "racing " discs from Speedway to use them.
The 72 rear end is 8" wider than a stock TF rear, and so I had to have flat wheels. The rear fender lips are rolled with an aluminum baseball bat, and then finished up with home depot paint sticks and C clamps to get the 1/4" clearance on the outside of the tires.
I have 3" dropped springs, so there is no side to side play so the tires do not rub.
The wider stance really helps it corner with the 1 1/8" sway bars

The wheels are 9" wide, and the tires ended up being 10 3/4 " wide. 27 inches tall with 255/50/17
on all 4 corners.
Unfortunately, the Impala SS is the only car that uses that size tire. Tire price is about $150 per tire.

[CATMdude45]

Originally Posted by Atomsplitter

I really like these wheels, where did you get them?

[Atomsplitter]

The wheels are 8" Corvette "AZ" Code Rally rims and the hubcaps are from a swamp meet. Sorry no specifics.
The offset is neutral (4").

[nail pounder]

I have a 58 3200 fleetside. I found some 15 x 8.5 rims on Craigslist I like. They are 3.25 Back spacing(from wheel mount surface to inside of rim. My stock rims are 3.5" BS. Anyone running this size have opinions/experience on clearance in the rear, or steering (no power steering) with wide fronts?

[torchlight]

Originally Posted by torchlight

Dont have them on the truck yet, but finally got them painted with the tires mounted. These are 16 inch steelies from Wheelsmith, painted, and using trim rings and hubcaps for the 41-46 trucks.

Just saw this thread pop back up to the top of the forum. Happy to be able to update with the wheels on the truck and looking real sharp!

[58CameoAZ]

Torchlight, That is a Beautiful Truck right there!

Allen