47-55.1 Starting a 52 Chevy 3100 Project. - Page 8 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**8man** · 03-11-2019, 08:54 AM

X2, and I'm one those pics will help. Thanks.

28TudorAZ · 03-11-2019, 09:37 AM

Quote:

Originally Posted by joedoh

nice work! those e brake pictures will be a great reference for future guys.

Thanks. It's an early 90 Chevy c1500 pedal one bolt goes on the bottom hinge the top I drilled another hole in the emergency brake and behind the hinge outside and the front was welded on. You could easily make it bolt by adding the plate I added behind it
Someone had cut speaker holes but I am leaving them as access holes to put in door pins for the dome light. Also bought the release cable at the auto parts store and it bolted directly to it without modification.

El_C10 · 03-11-2019, 04:19 PM

Very nice work man!! Just picked me up a 51 and weighing out my options. Thanks for the inspiration 28TudorAZ!!!

28TudorAZ · 03-11-2019, 08:43 PM

Quote:

Originally Posted by El_C10

Very nice work man!! Just picked me up a 51 and weighing out my options. Thanks for the inspiration 28TudorAZ!!!

Thanks! I am coming up on 1 year in 2 months so I better get my butt in gear. I wanted to get finished in a year. Found these ad pictures the other day from when I bought it.

28TudorAZ · 03-17-2019, 11:14 PM

Built the gas pedal.

**joedoh** · 03-18-2019, 12:45 AM

heyoooo!

**8man** · 03-18-2019, 08:46 AM

Looking good.

Matt_50 · 03-18-2019, 10:08 AM

Looks good, what insulation did you use behind the seat?

28TudorAZ · 03-18-2019, 11:05 PM

Thank guys. Any progress is good.

Quote:

Originally Posted by Matt_50

Looks good, what insulation did you use behind the seat?

I used the $15 rolls from Lowe's.

Driver_WT · 03-19-2019, 01:18 AM

Quote:

Originally Posted by 28TudorAZ

Thank guys. Any progress is good.

I used the $15 rolls from Lowe's.

Can you post a link to the $15 roll from Lowes?

Thanks.

28TudorAZ · 03-19-2019, 10:48 AM

Quote:

Originally Posted by Driver_WT

Can you post a link to the $15 roll from Lowes?

Thanks.

I am doing the whole inside including ceiling and doors with it. I want it as airtight as possible.

https://www.lowes.com/pd/Peel-Seal-I...ashing/1018733

NeoJuice · 03-19-2019, 11:12 AM

Quote:

Originally Posted by Driver_WT

Can you post a link to the $15 roll from Lowes?

Thanks.

I used some of this on my truck by other peoples suggestions.

https://www.lowes.ca/metal-duct/fros...erm=frost-king

Driver_WT · 03-19-2019, 11:20 AM

Thanks guys. Greatly appreciated.

Wade

28TudorAZ · 03-25-2019, 08:04 PM

Seat and seat belts put in.

**8man** · 03-25-2019, 08:06 PM

Nice. What is the seat out of.

Matt_50 · 03-25-2019, 08:18 PM

Are you doubling up on the sound deadener?

28TudorAZ · 03-26-2019, 09:31 AM

Quote:

Originally Posted by 8man

Nice. What is the seat out of.

Early 90s chevy truck. Pick n pull. $50 reupholstered $350

28TudorAZ · 03-26-2019, 09:32 AM

Quote:

Originally Posted by Matt_50

Are you doubling up on the sound deadener?

I did on the carpet. Went with a carpet padding as well.

28TudorAZ · 04-18-2019, 07:46 PM

Finished the pastry work on the front of the cab and started routing the engine wiring. I plan on getting the font end back on in the next week.

28TudorAZ · 06-20-2019, 04:43 PM

Havent posted in a while. Making some progress. My dad is bringing the doors over at the end of the week. Hopefully get them painted and put on over the weekend. Then its wiring and fluids.

**8man** · 06-20-2019, 07:05 PM

It is looking good.

28TudorAZ · 06-22-2019, 06:22 PM

Quote:

Originally Posted by 8man

It is looking good.

Thank! Doors and front bumper arrived at my house yesterday. Built the battery box from the s10 one.

**8man** · 06-23-2019, 08:22 AM

Did you do any type of stiffener on the inside of the firewall for the battery box?

28TudorAZ · 06-23-2019, 08:39 AM

Quote:

Originally Posted by 8man

Did you do any type of stiffener on the inside of the firewall for the battery box?

The brace going down to the inner fender is welded to the bottom of the box. When I push on it the whole truck moves so it is really solid. Also where I shortened it on one side it has really thick angle iron.

**8man** · 06-23-2019, 08:50 AM

I may steal this idea.

Thanks.

03-11-2019, 08:54 AM	#176
8man Senior Member Join Date: Sep 2017 Location: Bryan, Texas Posts: 2,350	Re: Starting a 52 Chevy 3100 Project. X2, and I'm one those pics will help. Thanks. __________________ 8man-aka Robert 1948 on a S10 Frame, small block with a carb 1954 Cab, 53 Front and Bed, 50 Doors, S10 Frame, Power TBD Build thread: "]http://67-72chevytrucks.com/vboard/showthread.php?t=746899&highlight=wife%27s+48[/URL] [/URL]http://67-72chevytrucks.com/vboard/showthread.php?t=840204

03-11-2019, 04:19 PM	#178
El_C10 Registered User Join Date: Sep 2017 Location: Buena Park Posts: 17	Re: Starting a 52 Chevy 3100 Project. Very nice work man!! Just picked me up a 51 and weighing out my options. Thanks for the inspiration 28TudorAZ!!!

03-17-2019, 11:14 PM	#180
28TudorAZ Registered User Join Date: May 2018 Location: Phoenix, AZ Posts: 323	Re: Starting a 52 Chevy 3100 Project. Built the gas pedal. Attached Images

03-18-2019, 12:45 AM	#181
joedoh Senior Member Join Date: May 2007 Location: Doodah Kansas Posts: 7,774	Re: Starting a 52 Chevy 3100 Project. heyoooo! __________________ the mass of men live lives of quiet desperation if there is a problem, I can have it. new project WAYNE http://67-72chevytrucks.com/vboard/s...d.php?t=844393

03-18-2019, 08:46 AM	#182
8man Senior Member Join Date: Sep 2017 Location: Bryan, Texas Posts: 2,350	Re: Starting a 52 Chevy 3100 Project. Looking good. __________________ 8man-aka Robert 1948 on a S10 Frame, small block with a carb 1954 Cab, 53 Front and Bed, 50 Doors, S10 Frame, Power TBD Build thread: "]http://67-72chevytrucks.com/vboard/showthread.php?t=746899&highlight=wife%27s+48[/URL] [/URL]http://67-72chevytrucks.com/vboard/showthread.php?t=840204

03-18-2019, 10:08 AM	#183
Matt_50 Registered User Join Date: Jul 2017 Location: Joshua, Texas. Posts: 1,303	Re: Starting a 52 Chevy 3100 Project. Looks good, what insulation did you use behind the seat? __________________ 1950 Build

03-19-2019, 11:20 AM	#188
Driver_WT Registered User Join Date: Dec 2017 Location: River John, NS Posts: 448	Re: Starting a 52 Chevy 3100 Project. Thanks guys. Greatly appreciated. Wade __________________ 53 Chevy 3100, SBC 355, 700R4, S10 frame, Ford 8.8 rear with 4.11 gears, front disc & rear drum brakes

03-25-2019, 08:04 PM	#189
28TudorAZ Registered User Join Date: May 2018 Location: Phoenix, AZ Posts: 323	Re: Starting a 52 Chevy 3100 Project. Seat and seat belts put in. Attached Images

03-25-2019, 08:06 PM	#190
8man Senior Member Join Date: Sep 2017 Location: Bryan, Texas Posts: 2,350	Re: Starting a 52 Chevy 3100 Project. Nice. What is the seat out of. __________________ 8man-aka Robert 1948 on a S10 Frame, small block with a carb 1954 Cab, 53 Front and Bed, 50 Doors, S10 Frame, Power TBD Build thread: "]http://67-72chevytrucks.com/vboard/showthread.php?t=746899&highlight=wife%27s+48[/URL] [/URL]http://67-72chevytrucks.com/vboard/showthread.php?t=840204

03-25-2019, 08:18 PM	#191
Matt_50 Registered User Join Date: Jul 2017 Location: Joshua, Texas. Posts: 1,303	Re: Starting a 52 Chevy 3100 Project. Are you doubling up on the sound deadener? __________________ 1950 Build

04-18-2019, 07:46 PM	#194
28TudorAZ Registered User Join Date: May 2018 Location: Phoenix, AZ Posts: 323	Re: Starting a 52 Chevy 3100 Project. Finished the pastry work on the front of the cab and started routing the engine wiring. I plan on getting the font end back on in the next week. Attached Images

06-20-2019, 04:43 PM	#195
28TudorAZ Registered User Join Date: May 2018 Location: Phoenix, AZ Posts: 323	Re: Starting a 52 Chevy 3100 Project. Havent posted in a while. Making some progress. My dad is bringing the doors over at the end of the week. Hopefully get them painted and put on over the weekend. Then its wiring and fluids. Attached Images

06-20-2019, 07:05 PM	#196
8man Senior Member Join Date: Sep 2017 Location: Bryan, Texas Posts: 2,350	Re: Starting a 52 Chevy 3100 Project. It is looking good. __________________ 8man-aka Robert 1948 on a S10 Frame, small block with a carb 1954 Cab, 53 Front and Bed, 50 Doors, S10 Frame, Power TBD Build thread: "]http://67-72chevytrucks.com/vboard/showthread.php?t=746899&highlight=wife%27s+48[/URL] [/URL]http://67-72chevytrucks.com/vboard/showthread.php?t=840204

06-23-2019, 08:22 AM	#198
8man Senior Member Join Date: Sep 2017 Location: Bryan, Texas Posts: 2,350	Re: Starting a 52 Chevy 3100 Project. Did you do any type of stiffener on the inside of the firewall for the battery box? __________________ 8man-aka Robert 1948 on a S10 Frame, small block with a carb 1954 Cab, 53 Front and Bed, 50 Doors, S10 Frame, Power TBD Build thread: "]http://67-72chevytrucks.com/vboard/showthread.php?t=746899&highlight=wife%27s+48[/URL] [/URL]http://67-72chevytrucks.com/vboard/showthread.php?t=840204

06-23-2019, 08:50 AM	#200
8man Senior Member Join Date: Sep 2017 Location: Bryan, Texas Posts: 2,350	Re: Starting a 52 Chevy 3100 Project. I may steal this idea. Thanks. __________________ 8man-aka Robert 1948 on a S10 Frame, small block with a carb 1954 Cab, 53 Front and Bed, 50 Doors, S10 Frame, Power TBD Build thread: "]http://67-72chevytrucks.com/vboard/showthread.php?t=746899&highlight=wife%27s+48[/URL] [/URL]http://67-72chevytrucks.com/vboard/showthread.php?t=840204



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.