Ratchet's Blazer - 1970 2wd with Original paint - Page 8 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

gringoloco · 09-30-2016, 02:21 PM

Sweet! I'm fully jealous of your Blazer

**IronCanine** · 10-01-2016, 12:15 AM

Nice work Steven.

smbrouss70 · 10-01-2016, 12:21 AM

Thanks Guys!

The exhaust whipped my butt today, and I still have a few things to finish up tomorrow before it's back on the road. It looks like I'm going to miss the Natchitoches show tomorrow, but I should still make a full week of Cruisin' the Coast starting Sunday.

smbrouss70 · 10-03-2016, 01:24 AM

I finished wrenching on the Blazer at 11:30 AM, took it for a 1/2 mile test drive, then loaded it up for Cruisin' the Coast and left at 12:15, drove it 200+ miles to get here and the damn thing is running like a top! There is obviously more potential that will be unlocked with more tuning, but damn I impressed myself!

C10_ustacould · 10-03-2016, 02:00 AM

Quote:

Originally Posted by smbrouss70

I finished wrenching on the Blazer at 11:30 AM, took it for a 1/2 mile test drive, then loaded it up for Cruisin' the Coast and left at 12:15, drove it 200+ miles to get here and the damn thing is running like a top! There is obviously more potential that will be unlocked with more tuning, but damn I impressed myself!

Congrats brutha! Hope to see y'all later this week.

**Palf70Step** · 10-03-2016, 07:43 AM

Glad you made it down here.

**Hart_Rod** · 10-03-2016, 07:44 AM

You guys have fun and be Safe!

gringoloco · 10-03-2016, 09:26 AM

Awesome

We need CTC pics!

smbrouss70 · 10-07-2016, 08:35 AM

Apparently the transmission cooler on my radiator is leaking and I had some milky looking trans fluid. It stopped pulling Monday night. We flushed out as much milky fluid out as possible and it pulls again, but shudders pretty bad. I have a buddy showing up today with a trailer so that we can get it home on sunday. I'll see if I can't flush it out better at the house, and maybe add some Lucas trans fix stuff to nurse it along until I can rebuild or replace it.

**Hart_Rod** · 10-07-2016, 09:15 AM

Quote:

Originally Posted by smbrouss70

Apparently the transmission cooler on my radiator is leaking and I had some milky looking trans fluid. It stopped pulling Monday night. We flushed out as much milky fluid out as possible and it pulls again, but shudders pretty bad. I have a buddy showing up today with a trailer so that we can get it home on sunday. I'll see if I can't flush it out better at the house, and maybe add some Lucas trans fix stuff to nurse it along until I can rebuild or replace it.

Argh!!!, that suxs....

gringoloco · 10-07-2016, 11:21 AM

Boooo... I think I'm over auto transmissions and their leaky/slippy tendencies

smbrouss70 · 10-07-2016, 01:48 PM

I feel the same way. I am thinking about putting the SM-465 back in, if I can't save this 700R4, and add a GV overdrive later.

smbrouss70 · 10-10-2016, 05:03 PM

I forgot to add pictures of the finished engine... The air cleaner is going to get taken off, blasted, and powdercoated so that it looks better, I had 15 minutes to wire-wheel it and paint it before I hit the road.

I also need to clean and paint the alternator and clean up the wiring. I was in way too big of a rush to get it out the door.

I trailered it home from Cruisin' the Coast yesterday and promptly took a nap, I was worn out. Tonight on my way home from the office, I will get some more transmission fluid and try to flush out more of the milky fluid. If it still isn't working just right, I might add a little posi friction modifier, I've been told it might help. If it doesn't work, I'm on the fence about what I should do... T56?, NV4500?, SM-465 with GV?, or rebuild/replace the 700-R4. We'll see what kind of dumb ideas I can come up with, I'm sure whatever I decide on, it will cost more than I expect.

62 short step · 10-10-2016, 06:41 PM

Looks good Steven!

I'd go to a Tremic 5 or 6 speed or stay with the 700.

gringoloco · 10-10-2016, 10:30 PM

Quote:

Originally Posted by smbrouss70

...I'm sure whatever I decide on, it will cost more than I expect...

And take twice as long... Engine looks great

LUV2XCLR8 · 11-23-2016, 08:54 AM

Awesome Sauce

smbrouss70 · 01-06-2017, 08:12 PM

Wow, it's been a few months since I touched this thread, but y'all haven't missed anything. I was too mad at the Blazer to touch it for a while, then some family issues came up, and of course, the holidays.

I did decide to rebuild the 700-R4, and it has been pulled out and sent off. I got word that it was finished and brought to a buddy's house for him to spray it the same orange as the engine. Might as well while it is out, right?

While pulling the trans, I noticed that the script valve covers got tweaked a bit from over-tightening and are leaking down the back of the engine. I'm thinking that I will get some plain cast aluminum valve covers, paint them orange, and put some of Iron Canine's decals to retain a stock-ish look while stopping the leaks.

Unfortunately, this unexpected expense has delayed the wheels and air bags a bit more. I want to make sure I'm not finishing stuff at the last minute right before Goodguys in March at the Texas Motor Speedway (like I did for CTC), so I definately won't start that snow ball rolling until at least the end of March, maybe later.

**Palf70Step** · 01-06-2017, 09:25 PM

Hmmmmmmmmm this is something new for you Steven.....waiting till after a show to fix something.

smbrouss70 · 01-06-2017, 09:45 PM

Quote:

Originally Posted by Palf70Step

Hmmmmmmmmm this is something new for you Steven.....waiting till after a show to fix something.

It's getting Fixed before the show.....Modified after...

**Advanced Design** · 01-06-2017, 10:32 PM

Too bad the script ones are leaking. Are they too tweaked to be made to work Steven?

That's a good idea for the replacement covers. I like that look.

smbrouss70 · 01-06-2017, 11:20 PM

Doug,

I could probably work them back into shape, but they would need to be refinished afterwards. Another problem with them is the fact that they don't have any baffles since they were modified to accept the breather and PCV. There is oil getting out there also.

I've never had good luck with stamped steel valve covers since I always tend to over-tighten them. It will put me ahead if I just get some valve covers with a stiff rail now. PML actually makes some cast valve covers that look like the original steel script covers, but they are $pendy.

http://www.yourcovers.com/valve_covers_11106.php

**Advanced Design** · 01-06-2017, 11:55 PM

Thanks Steven. Those are speedy and really nice...spending some time looking them over. Thanks for the link.

smbrouss70 · 01-23-2017, 03:23 PM

Well, my shiny valve covers showed up last week, so of course, I had to take them to work and blast them to get rid of the shine!

Before:

After:

smbrouss70 · 01-28-2017, 07:12 PM

We got the transmission and valve covers painted last night, loaded them up this morning (after curing) and got them back to the shop this afternoon. Next Saturday, I should be getting some help to install the trans, and hopefully all will be good from now on with the Blazer!

**lolife99** · 01-28-2017, 08:33 PM

Are those valve covers from Jegs?
I just got a set of big block valve covers like yours.

09-30-2016, 02:21 PM	#176
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,921	Re: Ratchet's Blazer - 1970 2wd with Original paint Sweet! I'm fully jealous of your Blazer __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy

10-01-2016, 12:15 AM	#177
IronCanine I'm trying.... Join Date: Oct 2013 Location: Athens, GA Posts: 2,705	Re: Ratchet's Blazer - 1970 2wd with Original paint Nice work Steven. __________________ 1970 K20 Z62 https://67-72chevytrucks.com/vboard/...56#post9334756 1970 Blazer http://67-72chevytrucks.com/vboard/s...d.php?t=645076 1969 K10 SWB CST http://67-72chevytrucks.com/vboard/s...52#post8520352 1971 K20 Z84 https://67-72chevytrucks.com/vboard/...90#post9047290 1946 B.F. Avery Model A Tractor http://67-72chevytrucks.com/vboard/s...55#post8292555 "Sometimes I wonder if zander208 was even real..."

10-01-2016, 12:21 AM	#178
smbrouss70 Registered User Join Date: Sep 2003 Location: Rayne, LA Posts: 2,784	Re: Ratchet's Blazer - 1970 2wd with Original paint Thanks Guys! The exhaust whipped my butt today, and I still have a few things to finish up tomorrow before it's back on the road. It looks like I'm going to miss the Natchitoches show tomorrow, but I should still make a full week of Cruisin' the Coast starting Sunday. __________________ Steven "If dogs don't go to heaven, when I die I want to go wherever they went." -- Will Rogers R.I.P. Oscar R.I.P. Ratchet 1967 Pontiac GTO - Dad was the Original Owner 1970 Chevy 2wd SWB "Oscar's Truck" 1970 Chevy 2wd Blazer "Ratchet's Blazer" 2013 Chevy 2500HD Crew Cab Duramax/Allison Z71 LTZ "Brown Sugar" 2017 Chevy Suburban "BDB" 2020 Chevy Blazer Premier "Foxy" Member of Louisiana Classic Truck Club (LCTC) Shop Build

10-03-2016, 01:24 AM	#179
smbrouss70 Registered User Join Date: Sep 2003 Location: Rayne, LA Posts: 2,784	Re: Ratchet's Blazer - 1970 2wd with Original paint I finished wrenching on the Blazer at 11:30 AM, took it for a 1/2 mile test drive, then loaded it up for Cruisin' the Coast and left at 12:15, drove it 200+ miles to get here and the damn thing is running like a top! There is obviously more potential that will be unlocked with more tuning, but damn I impressed myself! __________________ Steven "If dogs don't go to heaven, when I die I want to go wherever they went." -- Will Rogers R.I.P. Oscar R.I.P. Ratchet 1967 Pontiac GTO - Dad was the Original Owner 1970 Chevy 2wd SWB "Oscar's Truck" 1970 Chevy 2wd Blazer "Ratchet's Blazer" 2013 Chevy 2500HD Crew Cab Duramax/Allison Z71 LTZ "Brown Sugar" 2017 Chevy Suburban "BDB" 2020 Chevy Blazer Premier "Foxy" Member of Louisiana Classic Truck Club (LCTC) Shop Build

10-03-2016, 07:43 AM	#181
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 47,083	Re: Ratchet's Blazer - 1970 2wd with Original paint Glad you made it down here. __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!

10-03-2016, 07:44 AM	#182
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,859	Re: Ratchet's Blazer - 1970 2wd with Original paint You guys have fun and be Safe! __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3

10-03-2016, 09:26 AM	#183
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,921	Re: Ratchet's Blazer - 1970 2wd with Original paint Awesome We need CTC pics! __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy

10-07-2016, 08:35 AM	#184
smbrouss70 Registered User Join Date: Sep 2003 Location: Rayne, LA Posts: 2,784	Re: Ratchet's Blazer - 1970 2wd with Original paint Apparently the transmission cooler on my radiator is leaking and I had some milky looking trans fluid. It stopped pulling Monday night. We flushed out as much milky fluid out as possible and it pulls again, but shudders pretty bad. I have a buddy showing up today with a trailer so that we can get it home on sunday. I'll see if I can't flush it out better at the house, and maybe add some Lucas trans fix stuff to nurse it along until I can rebuild or replace it. __________________ Steven "If dogs don't go to heaven, when I die I want to go wherever they went." -- Will Rogers R.I.P. Oscar R.I.P. Ratchet 1967 Pontiac GTO - Dad was the Original Owner 1970 Chevy 2wd SWB "Oscar's Truck" 1970 Chevy 2wd Blazer "Ratchet's Blazer" 2013 Chevy 2500HD Crew Cab Duramax/Allison Z71 LTZ "Brown Sugar" 2017 Chevy Suburban "BDB" 2020 Chevy Blazer Premier "Foxy" Member of Louisiana Classic Truck Club (LCTC) Shop Build

10-07-2016, 11:21 AM	#186
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,921	Re: Ratchet's Blazer - 1970 2wd with Original paint Boooo... I think I'm over auto transmissions and their leaky/slippy tendencies __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy

10-07-2016, 01:48 PM	#187
smbrouss70 Registered User Join Date: Sep 2003 Location: Rayne, LA Posts: 2,784	Re: Ratchet's Blazer - 1970 2wd with Original paint I feel the same way. I am thinking about putting the SM-465 back in, if I can't save this 700R4, and add a GV overdrive later. __________________ Steven "If dogs don't go to heaven, when I die I want to go wherever they went." -- Will Rogers R.I.P. Oscar R.I.P. Ratchet 1967 Pontiac GTO - Dad was the Original Owner 1970 Chevy 2wd SWB "Oscar's Truck" 1970 Chevy 2wd Blazer "Ratchet's Blazer" 2013 Chevy 2500HD Crew Cab Duramax/Allison Z71 LTZ "Brown Sugar" 2017 Chevy Suburban "BDB" 2020 Chevy Blazer Premier "Foxy" Member of Louisiana Classic Truck Club (LCTC) Shop Build

10-10-2016, 05:03 PM	#188
smbrouss70 Registered User Join Date: Sep 2003 Location: Rayne, LA Posts: 2,784	Re: Ratchet's Blazer - 1970 2wd with Original paint I forgot to add pictures of the finished engine... The air cleaner is going to get taken off, blasted, and powdercoated so that it looks better, I had 15 minutes to wire-wheel it and paint it before I hit the road. I also need to clean and paint the alternator and clean up the wiring. I was in way too big of a rush to get it out the door. I trailered it home from Cruisin' the Coast yesterday and promptly took a nap, I was worn out. Tonight on my way home from the office, I will get some more transmission fluid and try to flush out more of the milky fluid. If it still isn't working just right, I might add a little posi friction modifier, I've been told it might help. If it doesn't work, I'm on the fence about what I should do... T56?, NV4500?, SM-465 with GV?, or rebuild/replace the 700-R4. We'll see what kind of dumb ideas I can come up with, I'm sure whatever I decide on, it will cost more than I expect. __________________ Steven "If dogs don't go to heaven, when I die I want to go wherever they went." -- Will Rogers R.I.P. Oscar R.I.P. Ratchet 1967 Pontiac GTO - Dad was the Original Owner 1970 Chevy 2wd SWB "Oscar's Truck" 1970 Chevy 2wd Blazer "Ratchet's Blazer" 2013 Chevy 2500HD Crew Cab Duramax/Allison Z71 LTZ "Brown Sugar" 2017 Chevy Suburban "BDB" 2020 Chevy Blazer Premier "Foxy" Member of Louisiana Classic Truck Club (LCTC) Shop Build Last edited by smbrouss70; 03-22-2018 at 11:06 PM.

10-10-2016, 06:41 PM	#189
62 short step Senior Member Join Date: Aug 2005 Location: Greenwell Springs, Louisiana Posts: 2,882	Re: Ratchet's Blazer - 1970 2wd with Original paint Looks good Steven! I'd go to a Tremic 5 or 6 speed or stay with the 700. __________________ www.louisianaclassictruckclub.com 1965 c-10 86 chevy c/k 20

11-23-2016, 08:54 AM	#191
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,484	Re: Ratchet's Blazer - 1970 2wd with Original paint Awesome Sauce __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Tow Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

01-06-2017, 08:12 PM	#192
smbrouss70 Registered User Join Date: Sep 2003 Location: Rayne, LA Posts: 2,784	Re: Ratchet's Blazer - 1970 2wd with Original paint Wow, it's been a few months since I touched this thread, but y'all haven't missed anything. I was too mad at the Blazer to touch it for a while, then some family issues came up, and of course, the holidays. I did decide to rebuild the 700-R4, and it has been pulled out and sent off. I got word that it was finished and brought to a buddy's house for him to spray it the same orange as the engine. Might as well while it is out, right? While pulling the trans, I noticed that the script valve covers got tweaked a bit from over-tightening and are leaking down the back of the engine. I'm thinking that I will get some plain cast aluminum valve covers, paint them orange, and put some of Iron Canine's decals to retain a stock-ish look while stopping the leaks. Unfortunately, this unexpected expense has delayed the wheels and air bags a bit more. I want to make sure I'm not finishing stuff at the last minute right before Goodguys in March at the Texas Motor Speedway (like I did for CTC), so I definately won't start that snow ball rolling until at least the end of March, maybe later. Attached Images __________________ Steven "If dogs don't go to heaven, when I die I want to go wherever they went." -- Will Rogers R.I.P. Oscar R.I.P. Ratchet 1967 Pontiac GTO - Dad was the Original Owner 1970 Chevy 2wd SWB "Oscar's Truck" 1970 Chevy 2wd Blazer "Ratchet's Blazer" 2013 Chevy 2500HD Crew Cab Duramax/Allison Z71 LTZ "Brown Sugar" 2017 Chevy Suburban "BDB" 2020 Chevy Blazer Premier "Foxy" Member of Louisiana Classic Truck Club (LCTC) Shop Build

01-06-2017, 09:25 PM	#193
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 47,083	Re: Ratchet's Blazer - 1970 2wd with Original paint Hmmmmmmmmm this is something new for you Steven.....waiting till after a show to fix something. __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!



Register or Log In To remove these advertisements.

01-06-2017, 10:32 PM	#195
Advanced Design Senior Member Join Date: Jul 2012 Location: Oblong, Illinois Posts: 7,028	Re: Ratchet's Blazer - 1970 2wd with Original paint Too bad the script ones are leaking. Are they too tweaked to be made to work Steven? That's a good idea for the replacement covers. I like that look. __________________ Doug Advanced Design’s 1977 Blazer Build Advanced Design's '48 'Burb Build Mrs Advanced Design's '72 Suburban Advanced Design's 56 BelAir LS swap

01-06-2017, 11:20 PM	#196
smbrouss70 Registered User Join Date: Sep 2003 Location: Rayne, LA Posts: 2,784	Re: Ratchet's Blazer - 1970 2wd with Original paint Doug, I could probably work them back into shape, but they would need to be refinished afterwards. Another problem with them is the fact that they don't have any baffles since they were modified to accept the breather and PCV. There is oil getting out there also. I've never had good luck with stamped steel valve covers since I always tend to over-tighten them. It will put me ahead if I just get some valve covers with a stiff rail now. PML actually makes some cast valve covers that look like the original steel script covers, but they are $pendy. http://www.yourcovers.com/valve_covers_11106.php __________________ Steven "If dogs don't go to heaven, when I die I want to go wherever they went." -- Will Rogers R.I.P. Oscar R.I.P. Ratchet 1967 Pontiac GTO - Dad was the Original Owner 1970 Chevy 2wd SWB "Oscar's Truck" 1970 Chevy 2wd Blazer "Ratchet's Blazer" 2013 Chevy 2500HD Crew Cab Duramax/Allison Z71 LTZ "Brown Sugar" 2017 Chevy Suburban "BDB" 2020 Chevy Blazer Premier "Foxy" Member of Louisiana Classic Truck Club (LCTC) Shop Build

01-06-2017, 11:55 PM	#197
Advanced Design Senior Member Join Date: Jul 2012 Location: Oblong, Illinois Posts: 7,028	Re: Ratchet's Blazer - 1970 2wd with Original paint Thanks Steven. Those are speedy and really nice...spending some time looking them over. Thanks for the link. __________________ Doug Advanced Design’s 1977 Blazer Build Advanced Design's '48 'Burb Build Mrs Advanced Design's '72 Suburban Advanced Design's 56 BelAir LS swap

01-23-2017, 03:23 PM	#198
smbrouss70 Registered User Join Date: Sep 2003 Location: Rayne, LA Posts: 2,784	Re: Ratchet's Blazer - 1970 2wd with Original paint Well, my shiny valve covers showed up last week, so of course, I had to take them to work and blast them to get rid of the shine! Before: After: __________________ Steven "If dogs don't go to heaven, when I die I want to go wherever they went." -- Will Rogers R.I.P. Oscar R.I.P. Ratchet 1967 Pontiac GTO - Dad was the Original Owner 1970 Chevy 2wd SWB "Oscar's Truck" 1970 Chevy 2wd Blazer "Ratchet's Blazer" 2013 Chevy 2500HD Crew Cab Duramax/Allison Z71 LTZ "Brown Sugar" 2017 Chevy Suburban "BDB" 2020 Chevy Blazer Premier "Foxy" Member of Louisiana Classic Truck Club (LCTC) Shop Build Last edited by smbrouss70; 03-22-2018 at 11:10 PM.

01-28-2017, 07:12 PM	#199
smbrouss70 Registered User Join Date: Sep 2003 Location: Rayne, LA Posts: 2,784	Re: Ratchet's Blazer - 1970 2wd with Original paint We got the transmission and valve covers painted last night, loaded them up this morning (after curing) and got them back to the shop this afternoon. Next Saturday, I should be getting some help to install the trans, and hopefully all will be good from now on with the Blazer! __________________ Steven "If dogs don't go to heaven, when I die I want to go wherever they went." -- Will Rogers R.I.P. Oscar R.I.P. Ratchet 1967 Pontiac GTO - Dad was the Original Owner 1970 Chevy 2wd SWB "Oscar's Truck" 1970 Chevy 2wd Blazer "Ratchet's Blazer" 2013 Chevy 2500HD Crew Cab Duramax/Allison Z71 LTZ "Brown Sugar" 2017 Chevy Suburban "BDB" 2020 Chevy Blazer Premier "Foxy" Member of Louisiana Classic Truck Club (LCTC) Shop Build Last edited by smbrouss70; 03-22-2018 at 11:19 PM.

01-28-2017, 08:33 PM	#200
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,700	Re: Ratchet's Blazer - 1970 2wd with Original paint Are those valve covers from Jegs? I just got a set of big block valve covers like yours. __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823

Register or Log In To remove these advertisements.