Arkansas K10 - Page 8 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Dieselwrencher** · 10-23-2021, 07:53 AM

Nice work Larry!

**davischevy** · 11-27-2021, 11:56 PM

Quote:

Originally Posted by CUSTOM/10

Those plastic plugs are very difficult to install...... I found a place that had rubber plugs and they worked much better .....

Gary

I managed to save most of the original rubber plugs, and I have been hoarding them for years. The plastic ones are a pita.

I think the upper cowl insulation has finally been shipped, so I can get back on the dash area.

**davischevy** · 12-30-2021, 10:38 PM

I got back on this project today. The top of the dash should have been painted first , but, I forgot, so, I spent 2 hours masking so I could do it now.

The upper cowl insulation came in, so I can start installing dash components now.

**IronCanine** · 12-31-2021, 12:09 AM

Looks nice. They painted it after at the factory. I hope you didn't tape it up better than they would have!

57taskforce · 12-31-2021, 12:10 AM

Lol Larry, that’s something I could see my self doing. Good thing you caught it before the windshield went in!

**Joesjunk** · 12-31-2021, 10:44 AM

Looking good Larry, I’m so glad to see the top of the dash painted correctly!

**Ol Blue K20** · 12-31-2021, 12:13 PM

Looking good, nice to see more progress!

**davischevy** · 12-31-2021, 09:08 PM

I got the dash pad on (twice). Somehow that seems like a milestone. The rest of the dash seems easy.

**Ol Blue K20** · 01-01-2022, 11:19 AM

Looks good, doing it twice means you're an expert now.

cak20 · 01-01-2022, 04:07 PM

looking great!

**DeadheadNM** · 01-01-2022, 05:45 PM

Looks great Larry

**davischevy** · 01-12-2022, 10:58 PM

Baby steps.

**Dieselwrencher** · 01-13-2022, 06:17 AM

Your dash reminds me of the time I realized I was supposed to paint the trim band under my rear window on my Camaro. Yes, of course I figured this out after the rear window was installed.

67C10Step · 01-13-2022, 09:07 AM

Looking fantastic. Any step towards the finish line is a good one.

**zicc1835** · 01-20-2022, 09:33 PM

Quote:

Originally Posted by davischevy

I got back on this project today. The top of the dash should have been painted first , but, I forgot, so, I spent 2 hours masking so I could do it now.

The upper cowl insulation came in, so I can start installing dash components now.

I have a question I realize the dash should be painted not get the glare did you pick a color and just use a flat paint or is that factory correct ? I have to look at mine to see but I an almost sure my yellow truck has a grayish dash ...when I get back at it the interior will be black with black dash pad ...your truck is a work of art hats off to your attention to detail...its fun and rewarding
thanks
Jess

**davischevy** · 01-20-2022, 11:02 PM

Quote:

Originally Posted by zicc1835

I have a question I realize the dash should be painted not get the glare did you pick a color and just use a flat paint or is that factory correct ? I have to look at mine to see but I an almost sure my yellow truck has a grayish dash ...when I get back at it the interior will be black with black dash pad ...your truck is a work of art hats off to your attention to detail...its fun and rewarding
thanks
Jess

Yes, I took pictures, and matched what was in the truck originally.

I took some saddle interior parts to my paint guy and he mixed some dye to match. That is subjective, because there are several different tones of saddle in the parts. We matched the back side of the door panels more than anything.

I added flattener to the top of dash paint. I have a picture on another computer with the original top of dash colors.

Did your truck have a Sandlewood dash pad? We have a 72 with a parchment interior and it had a sandlewood dash pad, which is a grayish color.

My 72 super has a black dash pad and black top of dash.

**Ol Blue K20** · 01-21-2022, 10:28 AM

I somehow unsubscribed from this thread, resubbing!

**IronCanine** · 01-21-2022, 11:33 AM

Such a great job Larry. Love all the details...firewall, shocks...just very well done. Can't wait for more. Keep up the good work buddy!

**davischevy** · 01-21-2022, 01:43 PM

This was the dash at disassembly.

**davischevy** · 01-21-2022, 07:11 PM

My son in law is working on his K5 Blazer so I have been detailing and chasing parts for it so all I got done on the Arkansas K10 was the park brake and cowl damper.

**Dieselwrencher** · 01-22-2022, 08:40 AM

Larry, do they sell new seals for the cowl damper now? I've got a couple that are just trash.

**72 tigger** · 01-22-2022, 08:50 AM

This thing is a piece of art! Love it

**davischevy** · 01-22-2022, 09:48 AM

Quote:

Originally Posted by Dieselwrencher

Larry, do they sell new seals for the cowl damper now? I've got a couple that are just trash.

Not that I know of. Mine was perfect.

I have an 83 year old friend from Wisconsin that has messed with these trucks for years. He doesn't do AC trucks. He brought me a small short bed load of very nice AC parts he has collected over the years. I used one of his AC harnesses in this truck.

**davischevy** · 03-08-2022, 12:08 PM

This is not all I have done, but it's the thing I got most excited about. I thought this knob was toast. I had scuffed it pretty good with the bench polisher.

I used Lave soap and a toothbrush to clean the numbers. I masked around the numbers and sprayed them until they were full of paint. I let it dry overnight, then used a DA with a foam pad to remove the overspray. Then I polished it with a wool pad.

I couldn't get the picture to turn upright.

**Louisvillekytruck** · 03-08-2022, 12:11 PM

Quote:

Originally Posted by davischevy

This is not all I have done, but it's the thing I got most excited about. I thought this knob was toast. I had scuffed it pretty good with the bench polisher.

I used Lave soap and a toothbrush to clean the numbers. I masked around the numbers and sprayed them until they were full of paint. I let it dry overnight, then used a DA with a foam pad to remove the overspray. Then I polished it with a wool pad.

I couldn't get the picture to turn upright.

Looks brand new

10-23-2021, 07:53 AM	#176
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,139	Re: Arkansas K10 Nice work Larry! __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

12-30-2021, 10:38 PM	#178
davischevy Senior Member Join Date: Sep 2008 Location: Harrison, Arkansas Posts: 9,836	Re: Arkansas K10 I got back on this project today. The top of the dash should have been painted first , but, I forgot, so, I spent 2 hours masking so I could do it now. The upper cowl insulation came in, so I can start installing dash components now. Attached Images __________________ other Larry Build thread, Arkansas K10 https://67-72chevytrucks.com/vboard/...=755797&page=5 The ability to speak several languages is an asset, but the ability to keep your mouth shut in any language is priceless.

12-31-2021, 12:09 AM	#179
IronCanine I'm trying.... Join Date: Oct 2013 Location: Athens, GA Posts: 2,705	Re: Arkansas K10 Looks nice. They painted it after at the factory. I hope you didn't tape it up better than they would have! __________________ 1970 K20 Z62 https://67-72chevytrucks.com/vboard/...56#post9334756 1970 Blazer http://67-72chevytrucks.com/vboard/s...d.php?t=645076 1969 K10 SWB CST http://67-72chevytrucks.com/vboard/s...52#post8520352 1971 K20 Z84 https://67-72chevytrucks.com/vboard/...90#post9047290 1946 B.F. Avery Model A Tractor http://67-72chevytrucks.com/vboard/s...55#post8292555 "Sometimes I wonder if zander208 was even real..."

12-31-2021, 12:10 AM	#180
57taskforce All about them K’s Join Date: Jun 2014 Location: Land of Entrapment Posts: 6,445	Re: Arkansas K10 Lol Larry, that’s something I could see my self doing. Good thing you caught it before the windshield went in! __________________ Tyler '57 3100 http://67-72chevytrucks.com/vboard/s...d.php?t=813888 '72 K20 Cheyenne: 5” lift, 35’s, front dana 60 blah blah blah… http://67-72chevytrucks.com/vboard/s...d.php?t=662879 ‘69 K10 SWB: 4” lift 33”s… in a million pieces http://67-72chevytrucks.com/vboard/s...d.php?t=805206 '98 Silverado LT K2500HD ECLB Vortec 454/4l80E: 6" lift 35x12.5x20’s

12-31-2021, 10:44 AM	#181
Joesjunk Senior Member Join Date: May 2001 Location: Independence MO. Posts: 7,702	Re: Arkansas K10 Looking good Larry, I’m so glad to see the top of the dash painted correctly! __________________ 72 3/4t Custom Deluxe 402/auto 66k Original paint 71 3/4t 4x4 Custom Deluxe 10k original miles Original paint 71 3/4t Cheyenne 402 70k original paint 72 3/4t 4x4 Custom deluxe 72 3/4t 4x4 Custom deluxe 91k original paint 72 Cheyenne/30 Dually 69 Camaro SS396 4-speed 13 GMC 2500HD Duramax I bought new 05 Jeep Wrangler "Willys Edition" 12k miles (I bought new) 85 3/4 ton 4x4 Scottsdale 33k miles original paint 86 1 ton 4x4 SRW Silverado 454 restored 80 1 ton 4x4 SRW Silverado 9,434 original miles!! original paint 95 GMC 1 ton dually 4x4 my dad bought new 95 GMC 3/4 ton 4x4, regular cab 454, 31k original miles 2002 2500HD 4x4 regular cab 6.0L 67k miles 2002 2500HD 4x4 regular cab 8.1L 28k miles 2003 GMC 2500HD 4x4 regular cab Diesel 93k miles 67-72 Parts for sale

12-31-2021, 12:13 PM	#182
Ol Blue K20 Proprietor of Dale's Corner Join Date: Nov 2012 Location: Vacaville , CA Posts: 16,243	Re: Arkansas K10 Looking good, nice to see more progress! __________________ "Some Days Chickens And Some Days Feathers" Dale XNGH ECV Sam Brannan 1004 R.I.P. 67ChevyRedneck R.I.P. Grumpy Old Man R.I.P. FleetsidePaul

12-31-2021, 09:08 PM	#183
davischevy Senior Member Join Date: Sep 2008 Location: Harrison, Arkansas Posts: 9,836	Re: Arkansas K10 I got the dash pad on (twice). Somehow that seems like a milestone. The rest of the dash seems easy. Attached Images __________________ other Larry Build thread, Arkansas K10 https://67-72chevytrucks.com/vboard/...=755797&page=5 The ability to speak several languages is an asset, but the ability to keep your mouth shut in any language is priceless.

01-01-2022, 11:19 AM	#184
Ol Blue K20 Proprietor of Dale's Corner Join Date: Nov 2012 Location: Vacaville , CA Posts: 16,243	Re: Arkansas K10 Looks good, doing it twice means you're an expert now. __________________ "Some Days Chickens And Some Days Feathers" Dale XNGH ECV Sam Brannan 1004 R.I.P. 67ChevyRedneck R.I.P. Grumpy Old Man R.I.P. FleetsidePaul

01-01-2022, 04:07 PM	#185
cak20 Registered User Join Date: Jul 2021 Location: Des Moines Posts: 31	Re: Arkansas K10 looking great!

01-01-2022, 05:45 PM	#186
DeadheadNM Carpe manana Join Date: Dec 2010 Location: Eau Claire, WI Posts: 12,424	Re: Arkansas K10 Looks great Larry __________________ 1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547 1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308 Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland

01-12-2022, 10:58 PM	#187
davischevy Senior Member Join Date: Sep 2008 Location: Harrison, Arkansas Posts: 9,836	Re: Arkansas K10 Baby steps. Attached Images __________________ other Larry Build thread, Arkansas K10 https://67-72chevytrucks.com/vboard/...=755797&page=5 The ability to speak several languages is an asset, but the ability to keep your mouth shut in any language is priceless.

01-13-2022, 06:17 AM	#188
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,139	Re: Arkansas K10 Your dash reminds me of the time I realized I was supposed to paint the trim band under my rear window on my Camaro. Yes, of course I figured this out after the rear window was installed. __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

01-13-2022, 09:07 AM	#189
67C10Step Registered User Join Date: Jul 2019 Location: Beebe, AR Posts: 2,471	Re: Arkansas K10 Looking fantastic. Any step towards the finish line is a good one. __________________ 1967 C10 1980 Jeep CJ5 2020 Toyota 4Runner 2024 Toyota Tundra

01-21-2022, 10:28 AM	#192
Ol Blue K20 Proprietor of Dale's Corner Join Date: Nov 2012 Location: Vacaville , CA Posts: 16,243	Re: Arkansas K10 I somehow unsubscribed from this thread, resubbing! __________________ "Some Days Chickens And Some Days Feathers" Dale XNGH ECV Sam Brannan 1004 R.I.P. 67ChevyRedneck R.I.P. Grumpy Old Man R.I.P. FleetsidePaul Last edited by Ol Blue K20; 01-21-2022 at 11:41 AM. Reason: auto correct failure

01-21-2022, 11:33 AM	#193
IronCanine I'm trying.... Join Date: Oct 2013 Location: Athens, GA Posts: 2,705	Re: Arkansas K10 Such a great job Larry. Love all the details...firewall, shocks...just very well done. Can't wait for more. Keep up the good work buddy! __________________ 1970 K20 Z62 https://67-72chevytrucks.com/vboard/...56#post9334756 1970 Blazer http://67-72chevytrucks.com/vboard/s...d.php?t=645076 1969 K10 SWB CST http://67-72chevytrucks.com/vboard/s...52#post8520352 1971 K20 Z84 https://67-72chevytrucks.com/vboard/...90#post9047290 1946 B.F. Avery Model A Tractor http://67-72chevytrucks.com/vboard/s...55#post8292555 "Sometimes I wonder if zander208 was even real..."



Register or Log In To remove these advertisements.

01-21-2022, 01:43 PM	#194
davischevy Senior Member Join Date: Sep 2008 Location: Harrison, Arkansas Posts: 9,836	Re: Arkansas K10 This was the dash at disassembly. Attached Images __________________ other Larry Build thread, Arkansas K10 https://67-72chevytrucks.com/vboard/...=755797&page=5 The ability to speak several languages is an asset, but the ability to keep your mouth shut in any language is priceless.

01-21-2022, 07:11 PM	#195
davischevy Senior Member Join Date: Sep 2008 Location: Harrison, Arkansas Posts: 9,836	Re: Arkansas K10 My son in law is working on his K5 Blazer so I have been detailing and chasing parts for it so all I got done on the Arkansas K10 was the park brake and cowl damper. Attached Images __________________ other Larry Build thread, Arkansas K10 https://67-72chevytrucks.com/vboard/...=755797&page=5 The ability to speak several languages is an asset, but the ability to keep your mouth shut in any language is priceless.

01-22-2022, 08:40 AM	#196
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,139	Re: Arkansas K10 Larry, do they sell new seals for the cowl damper now? I've got a couple that are just trash. __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

01-22-2022, 08:50 AM	#197
72 tigger Senior Member Join Date: Apr 2008 Location: Berne IN Posts: 3,238	Re: Arkansas K10 This thing is a piece of art! Love it __________________ 71 C10 72 K20 72 K10 Super Kirk

03-08-2022, 12:08 PM	#199
davischevy Senior Member Join Date: Sep 2008 Location: Harrison, Arkansas Posts: 9,836	Re: Arkansas K10 This is not all I have done, but it's the thing I got most excited about. I thought this knob was toast. I had scuffed it pretty good with the bench polisher. I used Lave soap and a toothbrush to clean the numbers. I masked around the numbers and sprayed them until they were full of paint. I let it dry overnight, then used a DA with a foam pad to remove the overspray. Then I polished it with a wool pad. I couldn't get the picture to turn upright. Attached Images __________________ other Larry Build thread, Arkansas K10 https://67-72chevytrucks.com/vboard/...=755797&page=5 The ability to speak several languages is an asset, but the ability to keep your mouth shut in any language is priceless.

Register or Log In To remove these advertisements.