Farmers big block - Page 8 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

66farmer · 02-26-2013, 08:44 PM

Quote:

Originally Posted by rustbucket66

That whole interior is beautiful, very professional looking and some new ideas i've never seen before. I've been watching your build closely, that is going to be one sweet ride. Say...shouldn't a farm truck have a fuel tank in the box, some fenceposts, some bailer twine, and half a roll of barbed wire?

It's only a short box, so if I put the fuel tank back there I will have to make a few more trips hauling the winter fire wood. I DID THE MATH

66farmer · 02-26-2013, 08:49 PM

Quote:

Originally Posted by PORKY

Did he make the armrest or is it out of something else recovered?

He used a 1x4 and just shaped it.

66farmer · 02-26-2013, 09:09 PM

Got the grill, mirror arms, head light and turn signal bezels back from D&G chrome in LA CA they did a good job.

I cut 3" out of the mirror arms. The picture shows the stock 5" mirror mounted to it. I'm thinking about going to a 4" or 3 3/4" mirror head what do you guys think.

I got the glove box door on it only took me 2 hours.

**pdxhall** · 02-26-2013, 11:45 PM

It just keeps getting better and better! Great work man.

flips72 · 02-27-2013, 06:02 PM

nice, love the chevrolet script,where did you get it and i noticed your vent windows are chrome, are they re-pops?

66farmer · 02-27-2013, 07:24 PM

Quote:

Originally Posted by flips72

nice, love the chevrolet script,where did you get it and i noticed your vent windows are chrome, are they re-pops?

I got the chevy emblem from a local swap meet. It's off a 55 or 56 sedan rear quarter panel. I bought the vent windows from the same swap meet, the PO had them chromed.

66farmer · 02-27-2013, 07:25 PM

Quote:

Originally Posted by pdxhall

It just keeps getting better and better! Great work man.

Thank you
I'm sure your truck will be a head turner.

66farmer · 04-03-2013, 12:51 PM

Made a little head way on the truck. Finished the bed wood inlays and did a test fit. It looks ok know it's time to put on the finish.

flashed · 04-03-2013, 02:45 PM

That looks great .

1963c-10 · 04-03-2013, 03:56 PM

Those wood inlays look great

flips72 · 04-03-2013, 05:30 PM

awesome

Ta2Don · 06-25-2013, 11:35 AM

Don't knowhow I missed this one up till now, but

Can't wait to see the finished truck...

66farmer · 06-25-2013, 08:09 PM

I finely finished the bed wood and installed the bed for the last time. Making the wood has taken a lot longer than it should of. I had one inlay that didn't look right so I had to redo the whole board. I picked the wrong finish the first time so I had to strip all the board and start over. Next time I think plywood would work just fine.

Greg63 · 06-25-2013, 08:15 PM

That looks REALLY nice. Definetly worth all the effort you put into it.
Greg.

VA72C10 · 06-25-2013, 08:18 PM

That looks FANTASTIC! It's a "little" nicer than plywood

Bomp · 06-25-2013, 08:57 PM

I remember how nice the truck looked in person when I saw it. Hope I get to see it out cruising in person sometime.
Great Job.

**Captainfab** · 06-26-2013, 12:34 AM

I definitely have to agree....VERY nice!

I can't think of any plywood that could possibly look right in that truck....maybe in a past life, but not now

Quote:

Originally Posted by Greg63

That looks REALLY nice. Definetly worth all the effort you put into it.
Greg.

Quote:

Originally Posted by VA72C10

That looks FANTASTIC! It's a "little" nicer than plywood

66farmer · 06-26-2013, 08:48 AM

Thank you all

I have been working on this truck for almost three years. I have set a date that she has to be completed by. Which is July 25th (yes this year) I have made my reservations and paid the fee for the Pacific Northwest GoodGuys show.

I don't have a lot to do but some times the little things can eat up a lot of time.
Working on the hood today, Saturday I have two friends coming over to help me put the front end on.

Ta2Don · 06-26-2013, 09:58 AM

da_bears_da1 · 06-26-2013, 10:26 AM

Looks amazing. Again, the attention to details shows in this great build!

McMurphy · 06-27-2013, 12:24 AM

Quote:

Originally Posted by 66farmer

Thank you all

I have been working on this truck for almost three years. I have set a date that she has to be completed by. Which is July 25th (yes this year) I have made my reservations and paid the fee for the Pacific Northwest GoodGuys show.

ahhhhh too bad you are not coming up for the Spokane Show the 16-18th of August.
Wife and I put in for leave for August and if it goes thru, I will enter our Pontiacs in the show. It would be awesome to see yours and meet you.

In the next couple years, after we both retire, we plan on making as many of the PNW shows as possible (we bought a 1955 two ton flat bed and a 20' trailer to haul our cars with mostly for this purpose).

Last year her 1972 LeMans was not ready so we only showed my '66 Tempest.

Your bed looks awesome, would sure like to see how you did that !!

**pdxhall** · 06-28-2013, 09:36 PM

Your truck is looking Awesome, man! I hope you make it to Goodguys. Your truck is going to be a standout up there.

66farmer · 07-05-2013, 10:36 AM

I'm getting close know. In the last week I got the front end, bed and installed wheels and tires. Know get it to run better and get all the little things finished.

Ta2Don · 07-05-2013, 10:58 AM

Very Clean, Very Inspiring!!!

greg65 · 07-05-2013, 02:18 PM

Nice work. Beautiful truck
Posted via Mobile Device

02-26-2013, 09:09 PM	#178
66farmer Registered User Join Date: Jun 2007 Location: North Plains Oregon Posts: 684	Re: Farmers big block Got the grill, mirror arms, head light and turn signal bezels back from D&G chrome in LA CA they did a good job. I cut 3" out of the mirror arms. The picture shows the stock 5" mirror mounted to it. I'm thinking about going to a 4" or 3 3/4" mirror head what do you guys think. I got the glove box door on it only took me 2 hours. Attached Images

02-26-2013, 11:45 PM	#179
pdxhall Senior Member Join Date: Mar 2011 Location: Tucson, Arizona Posts: 2,069	Re: Farmers big block It just keeps getting better and better! Great work man.

02-27-2013, 06:02 PM	#180
flips72 Registered User Join Date: Jan 2008 Location: oldfort tn Posts: 1,183	Re: Farmers big block nice, love the chevrolet script,where did you get it and i noticed your vent windows are chrome, are they re-pops? __________________ my 65 fleetside build http://67-72chevytrucks.com/vboard/s...d.php?t=442370 big back glass conversion http://67-72chevytrucks.com/vboard/s...dow+conversion

04-03-2013, 12:51 PM	#183
66farmer Registered User Join Date: Jun 2007 Location: North Plains Oregon Posts: 684	Re: Farmers big block Made a little head way on the truck. Finished the bed wood inlays and did a test fit. It looks ok know it's time to put on the finish. Attached Images

04-03-2013, 02:45 PM	#184
flashed Registered User Join Date: Oct 2009 Location: canton ga Posts: 12,728	Re: Farmers big block That looks great .

04-03-2013, 03:56 PM	#185
1963c-10 Registered User Join Date: Nov 2011 Location: fayetteville nc Posts: 10,338	Re: Farmers big block Those wood inlays look great __________________ 1963 Short bed step side SBW 427 big block and borg warner T-16 HD 3 speed manual http://67-72chevytrucks.com/vboard/s...d.php?t=519869 1963 Short bed fleetside BBW 348 1st gen big block w/Powerglide http://67-72chevytrucks.com/vboard/s...d.php?t=619024 1964 Short bed trailer

04-03-2013, 05:30 PM	#186
flips72 Registered User Join Date: Jan 2008 Location: oldfort tn Posts: 1,183	Re: Farmers big block awesome __________________ my 65 fleetside build http://67-72chevytrucks.com/vboard/s...d.php?t=442370 big back glass conversion http://67-72chevytrucks.com/vboard/s...dow+conversion

06-25-2013, 11:35 AM	#187
Ta2Don Registered User Join Date: Apr 2012 Location: Searcy, AR Posts: 4,203	Re: Farmers big block Don't knowhow I missed this one up till now, but Can't wait to see the finished truck... __________________ DON Proverbs 27:17 US Air Force Retarded errr Retired My '65 Stepper Build:http://67-72chevytrucks.com/vboard/s...d.php?t=533920 My '60 Rusty Patina Build:http://67-72chevytrucks.com/vboard/s...66#post7402266 My '72 http://67-72chevytrucks.com/vboard/s...59#post7204359 SOLD

06-25-2013, 08:09 PM	#188
66farmer Registered User Join Date: Jun 2007 Location: North Plains Oregon Posts: 684	Re: Farmers big block I finely finished the bed wood and installed the bed for the last time. Making the wood has taken a lot longer than it should of. I had one inlay that didn't look right so I had to redo the whole board. I picked the wrong finish the first time so I had to strip all the board and start over. Next time I think plywood would work just fine. Attached Images

06-25-2013, 08:15 PM	#189
Greg63 Enjoy your truck Join Date: Oct 2007 Location: Newmarket, Ontario, Canada Posts: 1,066	Re: Farmers big block That looks REALLY nice. Definetly worth all the effort you put into it. Greg. __________________ 1 Corinthians 10:13 1963 Chevrolet 1/2 ton 2010 Camaro SS/RS 2014 Jeep Grand Cherokee 2016 Jeep Cherokee

06-25-2013, 08:18 PM	#190
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: Farmers big block That looks FANTASTIC! It's a "little" nicer than plywood __________________ Looking for a 67-72 swb or blazer project in or around VA.

06-25-2013, 08:57 PM	#191
Bomp Registered User Join Date: Apr 2011 Location: . Posts: 3,104	Re: Farmers big block I remember how nice the truck looked in person when I saw it. Hope I get to see it out cruising in person sometime. Great Job.

06-26-2013, 08:48 AM	#193
66farmer Registered User Join Date: Jun 2007 Location: North Plains Oregon Posts: 684	Re: Farmers big block Thank you all I have been working on this truck for almost three years. I have set a date that she has to be completed by. Which is July 25th (yes this year) I have made my reservations and paid the fee for the Pacific Northwest GoodGuys show. I don't have a lot to do but some times the little things can eat up a lot of time. Working on the hood today, Saturday I have two friends coming over to help me put the front end on.

06-26-2013, 09:58 AM	#194
Ta2Don Registered User Join Date: Apr 2012 Location: Searcy, AR Posts: 4,203	Re: Farmers big block __________________ DON Proverbs 27:17 US Air Force Retarded errr Retired My '65 Stepper Build:http://67-72chevytrucks.com/vboard/s...d.php?t=533920 My '60 Rusty Patina Build:http://67-72chevytrucks.com/vboard/s...66#post7402266 My '72 http://67-72chevytrucks.com/vboard/s...59#post7204359 SOLD

06-26-2013, 10:26 AM	#195
da_bears_da1 Registered User Join Date: Feb 2013 Location: Genoa, IL Posts: 387	Re: Farmers big block Looks amazing. Again, the attention to details shows in this great build! __________________ Jeff *Simplify Life!* My build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=566533



Register or Log In To remove these advertisements.

06-28-2013, 09:36 PM	#197
pdxhall Senior Member Join Date: Mar 2011 Location: Tucson, Arizona Posts: 2,069	Re: Farmers big block Your truck is looking Awesome, man! I hope you make it to Goodguys. Your truck is going to be a standout up there. __________________ Sanity'66 http://67-72chevytrucks.com/vboard/s...d.php?t=515110 Long bed, Fleetside, Small back window I've Done So Much, With So Little, For So Long, That Now I Can Do Anything With Nothing.

07-05-2013, 10:36 AM	#198
66farmer Registered User Join Date: Jun 2007 Location: North Plains Oregon Posts: 684	Re: Farmers big block I'm getting close know. In the last week I got the front end, bed and installed wheels and tires. Know get it to run better and get all the little things finished. Attached Images

07-05-2013, 10:58 AM	#199
Ta2Don Registered User Join Date: Apr 2012 Location: Searcy, AR Posts: 4,203	Re: Farmers big block Very Clean, Very Inspiring!!! __________________ DON Proverbs 27:17 US Air Force Retarded errr Retired My '65 Stepper Build:http://67-72chevytrucks.com/vboard/s...d.php?t=533920 My '60 Rusty Patina Build:http://67-72chevytrucks.com/vboard/s...66#post7402266 My '72 http://67-72chevytrucks.com/vboard/s...59#post7204359 SOLD

07-05-2013, 02:18 PM	#200
greg65 Registered User Join Date: Mar 2009 Location: Daphne, Al Posts: 1,120	Re: Farmers big block Nice work. Beautiful truck Posted via Mobile Device __________________ 1965 c-10 swb 1997 c-1500 extended cab 2004 tahoe 1993 mustang gt BUILD THREAD:http://67-72chevytrucks.com/vboard/s...d.php?t=336653

Register or Log In To remove these advertisements.