66 frame off resto-mod - Page 8 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

CSoliz · 01-06-2010, 10:34 PM

Tom, I have a question for you. I noticed that your KBS treatment was painted over. Is this a suggested method for that application?
Thanks.
Chris

tomlamb · 01-07-2010, 01:04 AM

Quote:

Originally Posted by CSoliz

Tom, I have a question for you. I noticed that your KBS treatment was painted over. Is this a suggested method for that application?
Thanks.
Chris

It was, the KBS goes on the bare metal then primer, then paint. The KBS should help keep rust at bay for longer then just paint and primer. I don't want to have to deal with rust again, it's expensive!

70 Suburban · 01-07-2010, 09:36 AM

It is a wrecked suburban. it was wrecked 2 days after purchase. the front end is trashed but did not get into the engine.

70 Suburban · 01-07-2010, 10:59 AM

Will do

70 Suburban · 01-07-2010, 11:02 AM

And by the way great job on the air box i may do some of the same on mine but try to make it a little more low profile

tomlamb · 01-18-2010, 12:27 AM

Well, the day finally came, I drove my truck for the first time in months! Granted it was only up to the exhaust shop, but it got there under its own power. Lots of little things to finish up and one big one (the bed), but I see the light at the end of the tunnel.

**Dan in Pasadena** · 01-19-2010, 12:47 PM

Quote:

Originally Posted by tomlamb

Well, the day finally came, I drove my truck for the first time in months!...I see the light at the end of the tunnel.

We want to see it too!

More pictures please?

BTW, what was finally decided upon for wheels? I just re-read your entire thread and you mention consierding using the slots but that stick on weights hit the brake calipers when mounted in back. How wuill you address that, or are you changing to another wheel? With your stock color I Vote (as if it matters!) for nice deep Rally wheels. I think they'd look great on your truck. Either that or old fashioned gray centered Torque THrusts, not the full polished ones.

Can we see those pix, can we, huh, huh, huh?

tomlamb · 01-19-2010, 01:12 PM

Quote:

Originally Posted by Dan in Pasadena

We want to see it too!

More pictures please?

BTW, what was finally decided upon for wheels? I just re-read your entire thread and you mention consierding using the slots but that stick on weights hit the brake calipers when mounted in back. How wuill you address that, or are you changing to another wheel? With your stock color I Vote (as if it matters!) for nice deep Rally wheels. I think they'd look great on your truck. Either that or old fashioned gray centered Torque THrusts, not the full polished ones.

Can we see those pix, can we, huh, huh, huh?

I think I will be going with the Rally as soon as I recover from build (no cash in the budget remaining). The build cost more than I planned (surprise surprise) so some things had to be put on a future list (interior, wheels, grill, suspension, etc...) but it's going to be a great daily driver in the interim!

I hope to get some more pics this weekend when I go out to RRC.

tomlamb · 01-30-2010, 10:21 PM

Here are some more pics as requested:-)

Name: IMG_0882.jpg
Views: 2258
Size: 52.0 KB

Name: IMG_0883.jpg
Views: 2257
Size: 98.6 KB

Name: IMG_0888.jpg
Views: 2245
Size: 88.2 KB

ruffrida2005 · 01-30-2010, 10:33 PM

Looks good Tom.

Jonboy · 01-30-2010, 11:28 PM

Looks good, Tom. I vote polish those wheels and run them.

tomlamb · 01-31-2010, 10:20 AM

Working on the Turn signals, can anyone identify the 2 "hot" wires in the below pic? The color codes are not even close to the diagram...

Name: IMG_0007.jpg
Views: 2497
Size: 32.4 KB

Name: IMG_0007.jpg
Views: 2497
Size: 32.4 KB

I must have a replacement switch or the wire have faded in a strange way! Problem is, it was take apart so long ago, and that they don't have the old harness or anything to ID them! Little advice, take a LOT of photos when you are taking things apart...

tomlamb · 01-31-2010, 10:24 AM

Oh and one more Pic (thank you Goatnut for helping with a patch panel)!

Before:
Name: IMG_0874.jpg
Views: 2236
Size: 80.7 KB

After:

Name: IMG_0876.jpg
Views: 2225
Size: 68.1 KB

Goatnut · 02-01-2010, 12:21 PM

Looking good Tom. I'm happy to have helped with the panel!

Scott

**Clyde65** · 02-12-2010, 05:35 PM

What did you ever do with the AC, did you use a sanden or the stock 5.3l compressor? How bout that air box? I didnt know someone else was doing that. Too cool!

DaddyMack · 05-06-2010, 11:20 AM

Great looking truck!! My 350 gives me 14 mpg... I thought that was good...lol

NONHOG · 05-07-2010, 02:50 PM

Love the green, wheels are just right. good gas mileage.

idaho66stepside · 05-08-2010, 10:39 PM

Really cool build! but it makes me worry when I take my paint and body off. Your truck came out super cool!

TimE · 05-09-2010, 02:52 PM

That's a nice looking truck Tom. Glad it all came together for you.

01-06-2010, 10:34 PM	#1
CSoliz Torn between 66 and 78 Join Date: May 2008 Location: So. Cal. Posts: 253	Re: 66 frame off resto-mod Tom, I have a question for you. I noticed that your KBS treatment was painted over. Is this a suggested method for that application? Thanks. Chris

01-07-2010, 09:36 AM	#3
70 Suburban Rods Join Date: Nov 2002 Location: Bryan, TX Posts: 1,398	Re: 66 frame off resto-mod It is a wrecked suburban. it was wrecked 2 days after purchase. the front end is trashed but did not get into the engine. __________________ Just keepin it simple. 1965 C-10 Ext cab build. 350??(Does it count at 2 truck if I had to cut one up?) 1966 C-10 lwb 283 auto 1970 Suburban in pieces 1971 Blazer 4wd....restore someday. all factory CST 1972 Blazer 4wd parts truck still a roller 1972 GMC Sierra Grandee 1998 Chevy ext driver. 2005 F**D the wife drive...(cant fix women)

01-07-2010, 10:59 AM	#4
70 Suburban Rods Join Date: Nov 2002 Location: Bryan, TX Posts: 1,398	Re: 66 frame off resto-mod Will do __________________ Just keepin it simple. 1965 C-10 Ext cab build. 350??(Does it count at 2 truck if I had to cut one up?) 1966 C-10 lwb 283 auto 1970 Suburban in pieces 1971 Blazer 4wd....restore someday. all factory CST 1972 Blazer 4wd parts truck still a roller 1972 GMC Sierra Grandee 1998 Chevy ext driver. 2005 F**D the wife drive...(cant fix women)

01-07-2010, 11:02 AM	#5
70 Suburban Rods Join Date: Nov 2002 Location: Bryan, TX Posts: 1,398	Re: 66 frame off resto-mod And by the way great job on the air box i may do some of the same on mine but try to make it a little more low profile __________________ Just keepin it simple. 1965 C-10 Ext cab build. 350??(Does it count at 2 truck if I had to cut one up?) 1966 C-10 lwb 283 auto 1970 Suburban in pieces 1971 Blazer 4wd....restore someday. all factory CST 1972 Blazer 4wd parts truck still a roller 1972 GMC Sierra Grandee 1998 Chevy ext driver. 2005 F**D the wife drive...(cant fix women)

01-18-2010, 12:27 AM	#6
tomlamb Registered User Join Date: May 2008 Location: So Cal, CA Posts: 185	Re: 66 frame off resto-mod Well, the day finally came, I drove my truck for the first time in months! Granted it was only up to the exhaust shop, but it got there under its own power. Lots of little things to finish up and one big one (the bed), but I see the light at the end of the tunnel.

01-30-2010, 10:21 PM	#9
tomlamb Registered User Join Date: May 2008 Location: So Cal, CA Posts: 185	Re: 66 frame off resto-mod Here are some more pics as requested:-)

01-30-2010, 10:33 PM	#10
ruffrida2005 Member of the longbed union. Join Date: Feb 2009 Location: Killeen, Tx Posts: 2,158	Re: 66 frame off resto-mod Looks good Tom. __________________ Paul 88 GMC Crew Cab dually, 454/T400 64 LWB 400 HP 350/350T Bagged, under construction! Sold most of it! 92 S10 Iron Duke 5 speed, 5/7 drop for now. soon to be bagged. Sold http://67-72chevytrucks.com/vboard/s...59#post4637759

01-30-2010, 11:28 PM	#11
Jonboy Slots go on anything! Join Date: May 2003 Location: Richardson, TX Posts: 5,957	Re: 66 frame off resto-mod Looks good, Tom. I vote polish those wheels and run them. __________________ 1974 Jimmy- 5.3/4L80e/NP241

01-31-2010, 10:20 AM	#12
tomlamb Registered User Join Date: May 2008 Location: So Cal, CA Posts: 185	Re: 66 frame off resto-mod Working on the Turn signals, can anyone identify the 2 "hot" wires in the below pic? The color codes are not even close to the diagram... I must have a replacement switch or the wire have faded in a strange way! Problem is, it was take apart so long ago, and that they don't have the old harness or anything to ID them! Little advice, take a LOT of photos when you are taking things apart...

01-31-2010, 10:24 AM	#13
tomlamb Registered User Join Date: May 2008 Location: So Cal, CA Posts: 185	Re: 66 frame off resto-mod Oh and one more Pic (thank you Goatnut for helping with a patch panel)! Before: After:

02-01-2010, 12:21 PM	#14
Goatnut Registered User Join Date: Dec 2009 Location: Orting, Wa Posts: 84	Re: 66 frame off resto-mod Looking good Tom. I'm happy to have helped with the panel! Scott __________________ 1947 Art Deco Chevy truck 1964 C20 Custom cab 1965 Tempest Wagon 1967 GTO 1972 Luxury Lemans http://www.cardomain.com/id/a67goatnut

02-12-2010, 05:35 PM	#15
Clyde65 1965 Chevy C10, 2005 4.8L/4l60 Join Date: Aug 2004 Location: DFW Texas Posts: 8,540	Re: 66 frame off resto-mod What did you ever do with the AC, did you use a sanden or the stock 5.3l compressor? How bout that air box? I didnt know someone else was doing that. Too cool! __________________ Clyde65 Rebuild of Clyde http://67-72chevytrucks.com/vboard/s...84#post8338184 69 Aristocrat Lo Liner build http://67-72chevytrucks.com/vboard/s...84#post7561684 *support our troops!*

05-06-2010, 11:20 AM	#16
DaddyMack Wide Eyed User Join Date: Mar 2008 Location: Las Vegas, Nevada Posts: 261	Re: 66 frame off resto-mod Great looking truck!! My 350 gives me 14 mpg... I thought that was good...lol __________________ 1962 Chevy P/U SB Fleetside 350/350 2.5/5 static drop My Build: http://67-72chevytrucks.com/vboard/s...d.php?t=294723 Final (as final can be ) Pics: http://67-72chevytrucks.com/vboard/s...d.php?t=393441

05-07-2010, 02:50 PM	#17
NONHOG Registered User Join Date: Feb 2007 Location: Marana, Arizona Posts: 3,416	Re: 66 frame off resto-mod Love the green, wheels are just right. good gas mileage. __________________ "I feel the need for speed!"... as soon as I am done with my nap.

05-08-2010, 10:39 PM	#18
idaho66stepside Registered User Join Date: Feb 2010 Location: Twin Falls, ID Posts: 119	Re: 66 frame off resto-mod Really cool build! but it makes me worry when I take my paint and body off. Your truck came out super cool!



Register or Log In To remove these advertisements.

05-09-2010, 02:52 PM	#19
TimE Hey Y'all!! Join Date: Dec 2007 Location: Bay Minette, Alabama Posts: 1,755	Re: 66 frame off resto-mod That's a nice looking truck Tom. Glad it all came together for you. __________________ Just hopin' I live long enough to finish something!!!

Register or Log In To remove these advertisements.