Project "Vertically Challenged"

[70k52wd]

Originally Posted by jgh64pkup

very nice blazer
here is my solution to the tire problem
paint one side black and the other silver
thats the way mine is right now
not for that purpose just because im too lazy to paint the others

Thanks for compliment.
I have two sets of rallys. I like overkill.

[VA72C10]

Cool! You gonna have them machine the heads if that's the issue or change them out? I have a line on some Edelbrock Etechs with the matching intake for cheap and some World products heads as well.

[70k52wd]

IF it can be fixed on the cheap, great. I saved the $ up for a new engine if I need it. If not, maybe something shiny on all four corners instead.

I just called the shop to come and pick it up. End of month inspections have them swamped. I think it will be early next week for any results.

[VA72C10]

Alright now, we see your new dd/hauler....where are you at with the motor for this? And when are you coming down to Richmond?

[70k52wd]

OMG, look at how long it's been since I've done anything to this heap. Your calling me out on this eh Jonathan.
Well, the $$$ I saved up, it's gone. I'm starting over. I'm determined to get this done before spring is over.

[70k52wd]

I got a couple of these in the mail today. Time to get busy...

[VA72C10]

Alright Charlie, have you fixed the tank issues yet so you can get the heads on?

[70k52wd]

Well I was supposed to get going on this project last week, but makin money got in the way. SOOO, If I can get a start on it this weekend, maybe I'll actually get something done here soon. I want to get it running first, then seal tank amongst many other small issues to take care of.

[lks dcvn]

Just checked back into this thread - I have to say - that thing looks AWESOME!

Nice work.

[70k52wd]

Well it's about time...IT RUNS, and very well. It only took me a couple of years to fix the motor lol...What a beast. Still have no idea of what the problem was, but it would appear to be in the old heads. I'm going to have the old heads flow tested because I want to know what happened. I suspect it sucked a guide. Just a guess though. Anyhow, back together, painted and finally running. Here are some pics I hope...

[VA72C10]

Looks good! So when you coming down this way

[lolife99]

Sweet!
I knew you would get it.
Glad to see you back here posting again.

Now you have to take your super nice blazer some where and show it off.
Any carshows coming up in your area?

How close are you to Charlotte, NC?
The Goodguys show will be in town at the end of October.
http://www.southeasternnats.com/

[70k52wd]

Sooner than later. You guys have the drive-in theater down that aways.
Btw, come up here Oct 9th. There will be a cool show with lots of rat rods.
Posted via Mobile Device

[VA72C10]

Originally Posted by 70k52wd

Sooner than later. You guys have the drive-in theater down that aways.
Btw, come up here Oct 9th. There will be a cool show with lots of rat rods.
Posted via Mobile Device

I'll put it on my calendar!!!

[70k52wd]

Originally Posted by lolife99

Diggin the black ARP bolts on the engine also.
I assume you got the distributor figured out?

Yea the ARP bolts were a nice thought,,,but I didn't(nor does ARP)account for bracket spacing, so the nice idea will take some more time to get a few longer ARP's to finish it up. And I see I have some other "ugly" bolts to replace as well. And the dist was never the problem...I thought it may have been, but no. It was installer error lol. I was trying so many different things to get it running right, but forgot the BIG vacuum plug in the rear of the carb. Plugged her up and shazam...

Originally Posted by VA72C10

I'll put it on my calendar!!!

I went last year to the first annual and had a good time. 50's music and cars, what could be better...It's put on by a club called Karb Kings.

[70k52wd]

Hey Keith. GG's is about 6 or so hour drive from me. Not bad. I'll probably go.
Posted via Mobile Device

[lolife99]

Diggin the black ARP bolts on the engine also.
I assume you got the distributor figured out?

[VA72C10]

cool deal!!!

[FRENCHBLUE72]

Great looking blazer dont know how I missed it the 1st time .........

[70k52wd]

Thanks FB72...
Almost done with it. Got a/c working. That's cool Ha ha...2 things left to do before I can unleash it on the street, fix fuel gauge, and figure out what I'm gonna do about the exhaust. I really don't want side exit, and the funds are running short for over the axle. I think I am going to move the muffs forward a few inches, stick my turn downs on and let it go till I get the funds for the over the axle tail pipes. I guess I just figured out what I'm gonna do.

[VA72C10]

Originally Posted by 70k52wd

Thanks FB72...
Almost done with it. Got a/c working. That's cool Ha ha...2 things left to do before I can unleash it on the street, fix fuel gauge, and figure out what I'm gonna do about the exhaust. I really don't want side exit, and the funds are running short for over the axle. I think I am going to move the muffs forward a few inches, stick my turn downs on and let it go till I get the funds for the over the axle tail pipes. I guess I just figured out what I'm gonna do.

Cool

Sound like a good idea on the exhaust. Maybe turn the turndowns 45 degrees to the side so it won't kick up as much dust....

[70k52wd]

O.K. Haven"t driven this thing more than 2miles in the past 4-5 years...I'm taking it home now, about 30mi drive, 96 degrees with the a/c blasting should do it. Fingers crossed...
Still have the fuel gauge to fix, but that's about it...Other than tinker around, that never ends.

[hot trux]

maybe a shot in the dark, but some later model heads have to have ""self aligning"" rocker arms

[lolife99]

Originally Posted by hot trux

maybe a shot in the dark, but some later model heads have to have ""self aligning"" rocker arms

Like these?
Hey Charlie,... Keep at it.
You are so close!

[hot trux]

WOW , great pic Keith!