Project: 1967 C10 Small Window - Page 8 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

David67 · 03-06-2011, 08:37 PM

Quote:

Originally Posted by grayharville

ooohh i like them numbers!

X2

Quote:

Originally Posted by RCbowtie69

looking good,keep pictures coming & progress going

thanks will do!

JasonBird · 03-06-2011, 09:38 PM

That article on the transmition was awesome. I have that tranny in my truck.
Posted via Mobile Device

David67 · 03-06-2011, 09:52 PM

I thought it was pretty awesome. When everything's up and running I think I'll just start in 2nd!

grayharville · 03-06-2011, 10:10 PM

to hell with it, put the skinny pedal on the floor and dump that clutch!! Would make pretty tire smoke!

David67 · 03-06-2011, 10:18 PM

not ALL the time

those tires would get expensive!!

David67 · 03-07-2011, 10:19 PM

started taking the back of the cab down to metal and got the door frames all cleaned up and ready for primer. The exterior will be entirely primed by wed! I also need to get my transmission ready to go back in with the engine once the firewall has some paint on it.

David67 · 03-21-2011, 09:17 PM

Alright I was gone over all of spring break last week so I couldn't get anything done...BUT...if everything goes accordingly, the entire cab should be primed tomorrow

67chevy1series · 03-22-2011, 12:52 PM

well your offline so i think yuor pro bably working on it right now!

David67 · 03-23-2011, 12:34 AM

yesterday at 11:52 am??? I was in study hall! haha
anyways, I got the majority of the inner cab in black epoxy primer tonight....still some to finish up before I hit everything with the high build, which I'll also try to do tomorrow. Then wetsand the firewall and see if anything else needs to be fixed before I can spray red and get the eng/trans back in!!!

....its getting exciting.

David67 · 03-24-2011, 10:36 PM

grayharville · 03-24-2011, 11:19 PM

looks pretty clean!

67chevy1series · 03-24-2011, 11:57 PM

okay you beat me! haha mine wasnt done that fast!

**67cheby** · 03-25-2011, 09:48 AM

nice progress, looking good

David67 · 03-27-2011, 03:47 PM

Thanks guys!! I got my transmission all cleaned up yesterday. I think I'll replace the bearings and seals before I paint it. I'll start wetsanding the firewall in a little bit to get it ready for some red!!

Slick67 · 03-27-2011, 04:29 PM

Looks great! Can ya have it done for next weekend??

The sanding fun starts!!

Bennett68C10 · 03-28-2011, 07:21 AM

looks great, nice progress

JRBECK64 · 03-28-2011, 04:06 PM

Your truck is looking great. That cab looks like a million bucks. Keep posting the pictures.

JRBECK64

David67 · 03-28-2011, 11:45 PM

Quote:

Originally Posted by Slick67

Looks great! Can ya have it done for next weekend??

The sanding fun starts!!

Thanks yea of course! Just a few minor details to finish up

Oh yea it's gonna be alotta fun haha

Quote:

Originally Posted by Bennett--G4L

looks great, nice progress

Thanks I appreciate it!

Quote:

Originally Posted by JRBECK64

Your truck is looking great. That cab looks like a million bucks. Keep posting the pictures.

JRBECK64

Thanks means a lot. Will do!

Today I sanded the firewall, filled in some low spots, and sprayed it again. It should be smooooth. I'll wetsand tomorrow and see if anything else needs to be done before it's ready. I'll try and get some pics up tomorrow!

David67 · 03-29-2011, 10:32 PM

Here's what the transmission looks like now. I should've gotten a before pic of the other side because it was MUCH worse. I'll paint it after the firewall's done.

Also, here are some of the firewall that I just wetsanded. After sanding more when I got home from school, I realized I wanted to fix some places so I redid a few and hopefully I'll spray the sealer tomorrow and maybe even red...we'll see!!

David67 · 03-30-2011, 04:47 PM

Do yall think I need to wait a while before I spray sealer because of the wetsanding? I'm not sure if the high build would slightly absorb water and would need any time.

David67 · 03-30-2011, 04:56 PM

actually nevermind its fine

JasonBird · 03-30-2011, 06:09 PM

wow, that's what my tranny will look like after I get the grease off of it!! awesome! can't wait to see some color go on it!

David67 · 03-30-2011, 10:59 PM

Quote:

Originally Posted by JasonBird

wow, that's what my tranny will look like after I get the grease off of it!! awesome! can't wait to see some color go on it!

speaking of color.............

David67 · 03-30-2011, 11:01 PM

that picture does no justice and isn't very good but I'll take a few more tomorrow in the light! And it might look a little orange in the pic but its RED

David67 · 03-30-2011, 11:08 PM

maybe these will look better. the other one looked great until i posted it.

03-06-2011, 09:38 PM	#177
JasonBird '67 C-10 LWB Driver Join Date: Dec 2010 Location: Andover, Kansas Posts: 380	Re: Project: 1967 C10 Small Window That article on the transmition was awesome. I have that tranny in my truck. Posted via Mobile Device __________________ '67 C-10 LWB - My Build Thread '67 C-20 LWB - My Donor/ Parts truck - SOLD! '92 GMC SAFARI VAN - My Parts Go Getter '06 KIA SPORTAGE EX - My Commuter "All of this crap better make a truck!" - my wife Sue. Proud U.S.M.C. Dad!

03-06-2011, 09:52 PM	#178
David67 Registered User Join Date: Mar 2010 Location: Spring, TX Posts: 886	Re: Project: 1967 C10 Small Window I thought it was pretty awesome. When everything's up and running I think I'll just start in 2nd! __________________ 1967 C10 Fightin' Texas Aggie Class of 2015 IG: david_r67

03-06-2011, 10:10 PM	#179
grayharville ^^who I am^^ what I say> Join Date: Jun 2009 Location: Murchison, Tx Posts: 992	Re: Project: 1967 C10 Small Window to hell with it, put the skinny pedal on the floor and dump that clutch!! Would make pretty tire smoke! __________________ 70 chevy LWB 350/TH350 Barn find (AKA the 70) http://www.67-72chevytrucks.com/vboa...d.php?t=406364 East Tx Squares

03-06-2011, 10:18 PM	#180
David67 Registered User Join Date: Mar 2010 Location: Spring, TX Posts: 886	Re: Project: 1967 C10 Small Window not ALL the time those tires would get expensive!! __________________ 1967 C10 Fightin' Texas Aggie Class of 2015 IG: david_r67

03-07-2011, 10:19 PM	#181
David67 Registered User Join Date: Mar 2010 Location: Spring, TX Posts: 886	Re: Project: 1967 C10 Small Window started taking the back of the cab down to metal and got the door frames all cleaned up and ready for primer. The exterior will be entirely primed by wed! I also need to get my transmission ready to go back in with the engine once the firewall has some paint on it. __________________ 1967 C10 Fightin' Texas Aggie Class of 2015 IG: david_r67

03-21-2011, 09:17 PM	#182
David67 Registered User Join Date: Mar 2010 Location: Spring, TX Posts: 886	Re: Project: 1967 C10 Small Window Alright I was gone over all of spring break last week so I couldn't get anything done...BUT...if everything goes accordingly, the entire cab should be primed tomorrow __________________ 1967 C10 Fightin' Texas Aggie Class of 2015 IG: david_r67

03-22-2011, 12:52 PM	#183
67chevy1series Registered User Join Date: Mar 2010 Location: a t w a t e r cali 95301 Posts: 10,713	Re: Project: 1967 C10 Small Window well your offline so i think yuor pro bably working on it right now!

03-23-2011, 12:34 AM	#184
David67 Registered User Join Date: Mar 2010 Location: Spring, TX Posts: 886	Re: Project: 1967 C10 Small Window yesterday at 11:52 am??? I was in study hall! haha anyways, I got the majority of the inner cab in black epoxy primer tonight....still some to finish up before I hit everything with the high build, which I'll also try to do tomorrow. Then wetsand the firewall and see if anything else needs to be fixed before I can spray red and get the eng/trans back in!!! ....its getting exciting. __________________ 1967 C10 Fightin' Texas Aggie Class of 2015 IG: david_r67

03-24-2011, 10:36 PM	#185
David67 Registered User Join Date: Mar 2010 Location: Spring, TX Posts: 886	Re: Project: 1967 C10 Small Window Attached Images __________________ 1967 C10 Fightin' Texas Aggie Class of 2015 IG: david_r67

03-24-2011, 11:19 PM	#186
grayharville ^^who I am^^ what I say> Join Date: Jun 2009 Location: Murchison, Tx Posts: 992	Re: Project: 1967 C10 Small Window looks pretty clean! __________________ 70 chevy LWB 350/TH350 Barn find (AKA the 70) http://www.67-72chevytrucks.com/vboa...d.php?t=406364 East Tx Squares

03-24-2011, 11:57 PM	#187
67chevy1series Registered User Join Date: Mar 2010 Location: a t w a t e r cali 95301 Posts: 10,713	Re: Project: 1967 C10 Small Window okay you beat me! haha mine wasnt done that fast!

03-25-2011, 09:48 AM	#188
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: Project: 1967 C10 Small Window nice progress, looking good __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

03-27-2011, 03:47 PM	#189
David67 Registered User Join Date: Mar 2010 Location: Spring, TX Posts: 886	Re: Project: 1967 C10 Small Window Thanks guys!! I got my transmission all cleaned up yesterday. I think I'll replace the bearings and seals before I paint it. I'll start wetsanding the firewall in a little bit to get it ready for some red!! __________________ 1967 C10 Fightin' Texas Aggie Class of 2015 IG: david_r67

03-27-2011, 04:29 PM	#190
Slick67 Sofa King Crazy!! Join Date: Oct 2008 Location: Houston, TX Posts: 3,090	Re: Project: 1967 C10 Small Window Looks great! Can ya have it done for next weekend?? The sanding fun starts!! __________________ You found the Tater. *My Blazer Build (New)* - http://67-72chevytrucks.com/vboard/s...d.php?t=654650 *My 67 Build* - http://67-72chevytrucks.com/vboard/s...d.php?t=335650 67 Chevy LWB big window a/c AKA TOTALLED BY A JACKASS. 1972 2wd Blazer "Porterbuilt and Sloshed"

03-28-2011, 07:21 AM	#191
Bennett68C10 Registered User Join Date: Dec 2006 Location: Toms River, NJ Posts: 5,518	Re: Project: 1967 C10 Small Window looks great, nice progress __________________ Keith 66 Suburban Burb Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=751361 IG: bennett68c10



Register or Log In To remove these advertisements.

03-28-2011, 04:06 PM	#192
JRBECK64 Registered User Join Date: Sep 2008 Location: Cornelius Oregon Posts: 1,073	Re: Project: 1967 C10 Small Window Your truck is looking great. That cab looks like a million bucks. Keep posting the pictures. JRBECK64

03-29-2011, 10:32 PM	#194
David67 Registered User Join Date: Mar 2010 Location: Spring, TX Posts: 886	Re: Project: 1967 C10 Small Window Here's what the transmission looks like now. I should've gotten a before pic of the other side because it was MUCH worse. I'll paint it after the firewall's done. Also, here are some of the firewall that I just wetsanded. After sanding more when I got home from school, I realized I wanted to fix some places so I redid a few and hopefully I'll spray the sealer tomorrow and maybe even red...we'll see!! Attached Images __________________ 1967 C10 Fightin' Texas Aggie Class of 2015 IG: david_r67

03-30-2011, 04:47 PM	#195
David67 Registered User Join Date: Mar 2010 Location: Spring, TX Posts: 886	Re: Project: 1967 C10 Small Window Do yall think I need to wait a while before I spray sealer because of the wetsanding? I'm not sure if the high build would slightly absorb water and would need any time. __________________ 1967 C10 Fightin' Texas Aggie Class of 2015 IG: david_r67 Last edited by David67; 03-30-2011 at 11:23 PM.

03-30-2011, 04:56 PM	#196
David67 Registered User Join Date: Mar 2010 Location: Spring, TX Posts: 886	Re: Project: 1967 C10 Small Window actually nevermind its fine __________________ 1967 C10 Fightin' Texas Aggie Class of 2015 IG: david_r67

03-30-2011, 06:09 PM	#197
JasonBird '67 C-10 LWB Driver Join Date: Dec 2010 Location: Andover, Kansas Posts: 380	Re: Project: 1967 C10 Small Window wow, that's what my tranny will look like after I get the grease off of it!! awesome! can't wait to see some color go on it! __________________ '67 C-10 LWB - My Build Thread '67 C-20 LWB - My Donor/ Parts truck - SOLD! '92 GMC SAFARI VAN - My Parts Go Getter '06 KIA SPORTAGE EX - My Commuter "All of this crap better make a truck!" - my wife Sue. Proud U.S.M.C. Dad! Last edited by JasonBird; 03-30-2011 at 06:09 PM.

03-30-2011, 11:01 PM	#199
David67 Registered User Join Date: Mar 2010 Location: Spring, TX Posts: 886	Re: Project: 1967 C10 Small Window that picture does no justice and isn't very good but I'll take a few more tomorrow in the light! And it might look a little orange in the pic but its RED __________________ 1967 C10 Fightin' Texas Aggie Class of 2015 IG: david_r67 Last edited by David67; 03-30-2011 at 11:02 PM.

03-30-2011, 11:08 PM	#200
David67 Registered User Join Date: Mar 2010 Location: Spring, TX Posts: 886	Re: Project: 1967 C10 Small Window maybe these will look better. the other one looked great until i posted it. Attached Images __________________ 1967 C10 Fightin' Texas Aggie Class of 2015 IG: david_r67 Last edited by David67; 03-30-2011 at 11:08 PM.

Register or Log In To remove these advertisements.