Patina, shop logo'd, rusty trucks? - Page 8 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

SCOTI · 11-14-2008, 11:03 PM

Quote:

Originally Posted by Tx Firefighter

Scoti, I haven't been on here in a good while. Messy life issues, working a lot, etc..

Same truck by the way.

I remember the period @ the start of the big 'D'. Hope things are better these days.

prg machine · 11-14-2008, 11:55 PM

I'll play

sickred72 · 11-14-2008, 11:56 PM

prg machine · 11-14-2008, 11:56 PM

more

prg machine · 11-14-2008, 11:59 PM

here ya are

sickred72 · 11-15-2008, 12:00 AM

427 cubic inch full roller......680HP at the wheels 720 at the crank!

sickred72 · 11-15-2008, 12:01 AM

hold on!!!!!!!!!

prostreetC-10 · 11-15-2008, 01:21 AM

Been posted a few times........but since you asked.............

bumper · 11-15-2008, 03:15 AM

here ya go

exmonkeypunk · 11-15-2008, 03:29 AM

I always called it, "i don't have a garage, or enough money for a nice paint job, so this is what happens when you let a car sit outside too long".... Poor mans rat rods. I'm shocked at what some of the people pay to get their rides to look so "abandoned" or "hardly roadworthy"...
Trends are trends though.. At least this ones cool to look at.

Gregs67 · 11-15-2008, 10:49 PM

ARE YOU EFFING KIDDING ME?!?!?!?

I spend 5000 dollars on NEW sheetmetal, paint, and body so my truck does NOT look like any of these anymore.......AND NOW IT'S COOL?!?!?!?

So, essentially, I wasted my money. My dents, rust and faded paint were actually worth something? What did I miss? when did this happen?

Wait until you see my NEXT build. I'm not gonna do anything but put rimz on it 30 years from now. Hey! I'm beginning to like it already. My wallet is digging this kind of buildup. Hells yes.

c10addict · 11-16-2008, 10:57 AM

Quote:

Originally Posted by Gregs67

ARE YOU EFFING KIDDING ME?!?!?!?

I spend 5000 dollars on NEW sheetmetal, paint, and body so my truck does NOT look like any of these anymore.......AND NOW IT'S COOL?!?!?!?

So, essentially, I wasted my money. My dents, rust and faded paint were actually worth something? What did I miss? when did this happen?

Wait until you see my NEXT build. I'm not gonna do anything but put rimz on it 30 years from now. Hey! I'm beginning to like it already. My wallet is digging this kind of buildup. Hells yes.

Gotta stay on top of the current trends Bro!

1LoC10 · 11-16-2008, 11:37 AM

i would have bought another truck before i spent 5000 on sheet metal....lol

prostreetC-10 · 11-16-2008, 11:56 AM

The decision was easy for me. I don't have deep pockets.....my pockets are sewn shut. It sucks when you have to be a part of a trend that allows you to save 5K+ on paint and body work. I love this rat rod trend. It allows all my junk to fit in.....for now! Granted, when they pop the hood, they see where the money went. I won't be so lucky with my fastback. No rat rod trend there. YIKES!

SCOTI · 11-16-2008, 12:37 PM

Quote:

Originally Posted by prostreetC-10

The decision was easy for me. I don't have deep pockets.....my pockets are sewn shut. It sucks when you have to be a part of a trend that allows you to save 5K+ on paint and body work. I love this rat rod trend. It allows all my junk to fit in.....for now! Granted, when they pop the hood, they see where the money went. I won't be so lucky with my fastback. No rat rod trend there. YIKES!

I think the 'patina' look is associated w/the 'old truck' look. Old pick-ups seem to never go out of style. An old beater w/a fresh drivetrain & suspenision just look good.

The 'rat-rod' creations trend of late will go out of style IMO; classic/shop trucks... nope.

desertrat · 11-16-2008, 02:52 PM

Quote:

Originally Posted by SCOTI

I think the 'patina' look is associated w/the 'old truck' look. Old pick-ups seem to never go out of style. An old beater w/a fresh drivetrain & suspenision just look good.

The 'rat-rod' creations trend of late will go out of style IMO; classic/shop trucks... nope.

and I have not seen one truck on this thread that I would consider a "rat rod"

prostreetC-10 · 11-16-2008, 04:20 PM

I just looked up the word "patina" on Wikipedia and I will never call my truck a rat rod or rat truck again. That is the perfect description of these type trucks. My truck is not a "rod", so I'm not sure why I called it that in the first place. Dang.....there are parts of my body that have "patina-ed" over time!!!!!!!!!! LOL

*Shane* · 11-16-2008, 04:44 PM

Quote:

Originally Posted by Gregs67

I spend 5000 dollars on NEW sheetmetal, paint, and body so my truck does NOT look like any of these anymore.......AND NOW IT'S COOL?!?!?!?

That's gotta be embarrassing.

Tx Firefighter · 11-16-2008, 06:08 PM

Quote:

Originally Posted by prostreetC-10

....... Dang.....there are parts of my body that have "patina-ed" over time!!!!!!!!!! LOL

Same here. If patina is cool, the ladies must love my face. I've got a real patina'd mug.

desertrat · 11-16-2008, 06:52 PM

Quote:

Originally Posted by Tx Firefighter

Same here. If patina is cool, the ladies must love my face. I've got a real patina'd mug.

Now that's funny!

tdave00 · 11-17-2008, 04:25 AM

Is this a board members Jeep? If so, I'd like to know more about it.

prg machine · 11-17-2008, 02:13 PM

they mine.

57 wagon ..................stock as she came from the factory cept overdrive and some newer wheels and radials.

61 CJ-5...........stock

(Body)

Buick V-6 balanced, blueprinted, isky cam, D.U.I. ignition, chevy truck clutch ( I had to re-drill the flywheel) SM420 4 speed , Dana 20 "straight through" transfercase, Dana 60 rear Dana 44 front 4;56 gears,11 inch brakes, Rancho 2 1/2 inch suspension, Swampers on aluminum wheels...... full cage............oh and a Meyers (the snow plow company) steel cab.

I know this isn't a Jeep forum , but both these "trucks" have loads of patina.

tdave00 · 11-18-2008, 05:55 AM

Quote:

Originally Posted by prg machine

they mine.

PM Sent.

jkaylor68gmc · 11-18-2008, 10:51 AM

cool trucks

65panelrat · 11-18-2008, 11:14 AM

Here's A Couple!

11-14-2008, 11:55 PM	#177
prg machine Registered User Join Date: Jun 2007 Location: oregon Posts: 1,069	Re: Patina, shop logo'd, rusty trucks? I'll play Attached Images __________________ 69 K-20 cloned to a 67 with front clip and some other stuff. 383 .040 over Crane roller cam lifters and rockers ,1.6 intake ratio, Open chamber heads, 9.5-1 compression ratio, 2.02 intake valves , Edelbrock performer Air Gap manifold Carter AFB performer 750cfm, MSD ignition, SM465 NP205 4.10 gears:

11-14-2008, 11:56 PM	#178
sickred72 Registered User Join Date: Oct 2005 Location: oregon Posts: 204	Re: Patina, shop logo'd, rusty trucks? Attached Images

11-14-2008, 11:56 PM	#179
prg machine Registered User Join Date: Jun 2007 Location: oregon Posts: 1,069	Re: Patina, shop logo'd, rusty trucks? more __________________ 69 K-20 cloned to a 67 with front clip and some other stuff. 383 .040 over Crane roller cam lifters and rockers ,1.6 intake ratio, Open chamber heads, 9.5-1 compression ratio, 2.02 intake valves , Edelbrock performer Air Gap manifold Carter AFB performer 750cfm, MSD ignition, SM465 NP205 4.10 gears:

11-14-2008, 11:59 PM	#180
prg machine Registered User Join Date: Jun 2007 Location: oregon Posts: 1,069	Re: Patina, shop logo'd, rusty trucks? here ya are Attached Images __________________ 69 K-20 cloned to a 67 with front clip and some other stuff. 383 .040 over Crane roller cam lifters and rockers ,1.6 intake ratio, Open chamber heads, 9.5-1 compression ratio, 2.02 intake valves , Edelbrock performer Air Gap manifold Carter AFB performer 750cfm, MSD ignition, SM465 NP205 4.10 gears:

11-15-2008, 12:00 AM	#181
sickred72 Registered User Join Date: Oct 2005 Location: oregon Posts: 204	Re: Patina, shop logo'd, rusty trucks? 427 cubic inch full roller......680HP at the wheels 720 at the crank!

11-15-2008, 12:01 AM	#182
sickred72 Registered User Join Date: Oct 2005 Location: oregon Posts: 204	Re: Patina, shop logo'd, rusty trucks? hold on!!!!!!!!! Attached Images

11-15-2008, 01:21 AM	#183
prostreetC-10 My Carbon Footprint Join Date: Oct 2008 Location: Orygun Posts: 5,527	Re: Patina, shop logo'd, rusty trucks? Been posted a few times........but since you asked............. __________________ A quick "pedalfest" *Still getting loose (carb test)* 496 Initial fire up video!

11-15-2008, 03:15 AM	#184
bumper Registered User Join Date: Jan 2001 Location: western iowa Posts: 210	Re: Patina, shop logo'd, rusty trucks? here ya go Attached Images

11-15-2008, 03:29 AM	#185
exmonkeypunk Barrito Loco Diablo Join Date: May 2008 Location: Cherry Valley, Illinois Posts: 636	Re: Patina, shop logo'd, rusty trucks? I always called it, "i don't have a garage, or enough money for a nice paint job, so this is what happens when you let a car sit outside too long".... Poor mans rat rods. I'm shocked at what some of the people pay to get their rides to look so "abandoned" or "hardly roadworthy"... Trends are trends though.. At least this ones cool to look at.

11-15-2008, 10:49 PM	#186
Gregs67 Registered User Join Date: Oct 2008 Location: bath PA Posts: 22	Re: Patina, shop logo'd, rusty trucks? ARE YOU EFFING KIDDING ME?!?!?!? I spend 5000 dollars on NEW sheetmetal, paint, and body so my truck does NOT look like any of these anymore.......AND NOW IT'S COOL?!?!?!? So, essentially, I wasted my money. My dents, rust and faded paint were actually worth something? What did I miss? when did this happen? Wait until you see my NEXT build. I'm not gonna do anything but put rimz on it 30 years from now. Hey! I'm beginning to like it already. My wallet is digging this kind of buildup. Hells yes. Last edited by Gregs67; 11-15-2008 at 11:03 PM.

11-16-2008, 11:37 AM	#188
1LoC10 Insert Title Here Join Date: Feb 2006 Location: Dyer, Indiana Posts: 5,679	Re: Patina, shop logo'd, rusty trucks? i would have bought another truck before i spent 5000 on sheet metal....lol __________________ BOBBY _69 SWB_ 1000 pics of 67-72's>> http://s193.photobucket.com/albums/z...-72/?start=all <<

11-16-2008, 11:56 AM	#189
prostreetC-10 My Carbon Footprint Join Date: Oct 2008 Location: Orygun Posts: 5,527	Re: Patina, shop logo'd, rusty trucks? The decision was easy for me. I don't have deep pockets.....my pockets are sewn shut. It sucks when you have to be a part of a trend that allows you to save 5K+ on paint and body work. I love this rat rod trend. It allows all my junk to fit in.....for now! Granted, when they pop the hood, they see where the money went. I won't be so lucky with my fastback. No rat rod trend there. YIKES! __________________ A quick "pedalfest" *Still getting loose (carb test)* 496 Initial fire up video!

11-16-2008, 04:20 PM	#192
prostreetC-10 My Carbon Footprint Join Date: Oct 2008 Location: Orygun Posts: 5,527	Re: Patina, shop logo'd, rusty trucks? I just looked up the word "patina" on Wikipedia and I will never call my truck a rat rod or rat truck again. That is the perfect description of these type trucks. My truck is not a "rod", so I'm not sure why I called it that in the first place. Dang.....there are parts of my body that have "patina-ed" over time!!!!!!!!!! LOL __________________ A quick "pedalfest" *Still getting loose (carb test)* 496 Initial fire up video! Last edited by prostreetC-10; 11-16-2008 at 04:21 PM.

11-17-2008, 04:25 AM	#196
tdave00 Restoring a 68 SWB Join Date: Jan 2008 Location: Nashville, TN Posts: 1,068	Re: Patina, shop logo'd, rusty trucks? Is this a board members Jeep? If so, I'd like to know more about it. __________________ My Build Thread: Lucy - My 1968 SWB - Shop Truck Style North Nashville Concrete Contractor

11-17-2008, 02:13 PM	#197
prg machine Registered User Join Date: Jun 2007 Location: oregon Posts: 1,069	Re: Patina, shop logo'd, rusty trucks? they mine. 57 wagon ..................stock as she came from the factory cept overdrive and some newer wheels and radials. 61 CJ-5...........stock (Body) Buick V-6 balanced, blueprinted, isky cam, D.U.I. ignition, chevy truck clutch ( I had to re-drill the flywheel) SM420 4 speed , Dana 20 "straight through" transfercase, Dana 60 rear Dana 44 front 4;56 gears,11 inch brakes, Rancho 2 1/2 inch suspension, Swampers on aluminum wheels...... full cage............oh and a Meyers (the snow plow company) steel cab. I know this isn't a Jeep forum , but both these "trucks" have loads of patina. __________________ 69 K-20 cloned to a 67 with front clip and some other stuff. 383 .040 over Crane roller cam lifters and rockers ,1.6 intake ratio, Open chamber heads, 9.5-1 compression ratio, 2.02 intake valves , Edelbrock performer Air Gap manifold Carter AFB performer 750cfm, MSD ignition, SM465 NP205 4.10 gears:



Register or Log In To remove these advertisements.

11-18-2008, 10:51 AM	#199
jkaylor68gmc Senior Member Join Date: Dec 2005 Location: TN Posts: 2,448	Re: Patina, shop logo'd, rusty trucks? cool trucks __________________ 1947 International KB-1 1957 Chevy Bel-Air riding low 1962 swb fleetside 2002 Chevrolet Silverado 7-inch lift on 35 Daily driver 2016 Chevy Tahoe Better halves ride

11-18-2008, 11:14 AM	#200
65panelrat Registered User Join Date: Aug 2008 Location: Rio Rancho, New Mexico Posts: 211	Re: Patina, shop logo'd, rusty trucks? Here's A Couple! Attached Images __________________ Bowties For Life!🇺🇸

Register or Log In To remove these advertisements.