67 GMC super custom build - Page 8 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

duallyjams · 12-20-2013, 08:05 PM

Having a back up is always a good idea.

chewychevy67 · 01-12-2014, 06:15 PM

got my nos cast iron nose cone now and the starter is assembled. Now I need to get the correct bolts for the iron nose. the aluminum nose bolts are longer. also got a starter solenoid shield original from a 67 corvette. not sure how much heat this will stop but better than nothing. may be a pain to get at the wires after though when I have to remove it.

chewychevy67 · 01-16-2014, 09:12 PM

Im going to start working on my bed floor for the next month or so. also need to assemble the bed to fit the tailgate. heres what I have today. these have been wet sanded and look like a mirror. I still need to buy, stain and clear the center pieces. hope to have them soon and get some progress done.

chewychevy67 · 02-01-2014, 10:04 PM

I got my a/c pump belt shields. These should help keep the oil off the underside of my hood lol. These are from 1968 era GM cars. look correct but the trucks never had them I don't think.

duallyjams · 02-02-2014, 06:45 PM

That's the first time I have seen those.

nuke1 · 02-03-2014, 02:53 AM

just to let you know, you have done an amazing job so far on this truck, something to be realy proud of !!!! can not wait to finally go and see it. it was great to meet you and hope the future looks bright for out trucks!! lol I read your thread awhile ago but never commented, so i thought that i should finally. When you are in town one night let me know, i would liek to come and see the truck, and you should see Tylers 58, it is coming along nicely.

chewychevy67 · 02-03-2014, 03:00 PM

I got my restored 67 only vent windows from Roger Koop today. They look nice. cant wait till the time comes to put them in.

chewychevy67 · 02-03-2014, 03:02 PM

Quote:

Originally Posted by nuke1

just to let you know, you have done an amazing job so far on this truck, something to be realy proud of !!!! can not wait to finally go and see it. it was great to meet you and hope the future looks bright for out trucks!! lol I read your thread awhile ago but never commented, so i thought that i should finally. When you are in town one night let me know, i would liek to come and see the truck, and you should see Tylers 58, it is coming along nicely.

you bet. ill let you know when im in town and workin on her. been so busy at work lately I haven't had any free time.

chewychevy67 · 02-14-2014, 05:19 PM

here is a pic of how I am going to run my vacuum gauge lines. Just tryin to get the little details done while I wait for my bed wood.

chewychevy67 · 03-14-2014, 06:09 PM

I Finished restoring my original oil bath air cleaner today. I had it powder coated last summer and this week I went and bought some oil bath filter element made for restoration on older tractors. bought 4 bags of it and it worked out very nicely. here's some pic's . I also had an original style paper element air cleaner powder coated and have it as well. I may just use the oil bath for shows and run the paper element when I actually drive the truck (someday) but I guess well see.

chewychevy67 · 03-14-2014, 06:23 PM

Here are some of the paper element air cleaner and a few more oil bath. I took a few on the carb as well for you guys.

Z10 · 03-14-2014, 10:10 PM

Quote:

Originally Posted by chewychevy67

Im going to start working on my bed floor for the next month or so. also need to assemble the bed to fit the tailgate. heres what I have today. these have been wet sanded and look like a mirror. I still need to buy, stain and clear the center pieces. hope to have them soon and get some progress done.

Would you mind sharing what brand and color of stain you are using? I really like this. I'm just about ready to start on my bed.

Z10

67_C-30 · 03-14-2014, 11:26 PM

Quote:

Originally Posted by chewychevy67

Here are some of the paper element air cleaner and a few more oil bath. I took a few on the carb as well for you guys.

Looks awesome!

I'm also glad to see that my kids aren't the only ones that like to stand on their heads on the couch!

chewychevy67 · 03-14-2014, 11:43 PM

Quote:

Originally Posted by Z10

Would you mind sharing what brand and color of stain you are using? I really like this. I'm just about ready to start on my bed.

Z10

It was made up by my cabinet makers. The name is arrow head but the brand I am unsure of.It is a spray on only stain.

nuke1 · 03-16-2014, 01:47 AM

looks really good Rod!! love the attention to detail. You are gonna have to let me know when you are back in town, it seems we keep missing each other. give me a call later.

chewychevy67 · 03-16-2014, 04:49 PM

Quote:

Originally Posted by nuke1

looks really good Rod!! love the attention to detail. You are gonna have to let me know when you are back in town, it seems we keep missing each other. give me a call later.

Call me when you have time. any time. I don't have your number so I cant call you. would love for you to give me some advice on the bodywork stuff.

chewychevy67 · 03-26-2014, 06:29 PM

Here is something cool. I picked these new 1967 Saskatchewan licence plates up a few years ago on kijiji in the original packaging and thought I would share them with you. one pair is for trucks and the other pair is for passenger cars (maby for the matching 67 chevelle I also dream about having some day) and also I have a pair of 67 truck plates that I found in the buddy bucket counsel. I wont restore the originals being that I have new ones. these are cool.

**jmader** · 04-02-2014, 10:57 AM

Great build. This will be a great resource as I start to putting back together. Question- is your 327 original to your truck? If so could you tell me the head and intake casting numbers? Thanks!

chewychevy67 · 04-02-2014, 11:01 AM

My engine is original but the intake is off of a 64 car. Tne original was missing. Sorry I couldnt help.

mcbassin · 04-02-2014, 11:04 AM

That wood looks great! As does the rest of your parts. I had to use a cast iron starter nose on my 402. I just couldn't keep the aluminum ones from cracking or breaking off. Keep the pictures coming.

chewychevy67 · 05-10-2014, 05:45 PM

work has been slow as I am getting into my busy season at work. Dennis is having trouble making the mould for my new steering wheel so I thought I would share 2 pic's of what it will look like when finished. just used a blue wheel but when finished it will be red. the wheel is from a 1967 impala originally.

chewychevy67 · 06-06-2014, 09:07 PM

I got board today so I assembled my engine to make sure everything fits as it should. Some pics for you guys. as soon as I have all the parts I will have the rest powder coated and the engine will get machined.

chewychevy67 · 07-02-2014, 07:10 PM

A few more just in case someone needs photos of the 283/327 style air injection. Just not sure where the vacuum signal hose hooks up to.

mcbassin · 07-02-2014, 11:55 PM

Very nice work on the engine. I wish I could help you on the vacuum signal hose.

68Gold/white · 07-03-2014, 02:39 PM

Who did you have build your carb???

The springs on the brake drums dampen vibration (however small they may be), already previously posted, allow for better brake operation, if thats possible w/ drum brakes, the springs ARE needed, couldn't hurt w/ heat dissipation either.

What rear is that, maybe particular to the GMC leaf spring pickups??? or heavy duty option???

Never ever seen one of those alternators, good find on spare.

I was at an NHRA drag race in Houston, Texas in 1990. There was a racer from your town. his name was Xenon Kotelko, the announcer enjoyed saying his name, and then the name of your city...

12-20-2013, 08:05 PM	#176
duallyjams Registered User Join Date: May 2007 Location: Deale Md Posts: 4,663	Re: 67 GMC super custom build Having a back up is always a good idea. __________________ James 63 GMC V6 4speed carryall 65 chevy swb bbw V8 auto 68 K20 327/4 speed, buddy buckets 2002 GMC CC Dually Duramax 64 GMC lwb 3/4 V6 4speed SOLD 66 GMC swb bbw buddy buckets SOLD IG duallyjams The only thing that stays the same is constant change!

01-12-2014, 06:15 PM	#177
chewychevy67 Registered User Join Date: Jan 2010 Location: Here Posts: 5,539	Re: 67 GMC super custom build got my nos cast iron nose cone now and the starter is assembled. Now I need to get the correct bolts for the iron nose. the aluminum nose bolts are longer. also got a starter solenoid shield original from a 67 corvette. not sure how much heat this will stop but better than nothing. may be a pain to get at the wires after though when I have to remove it. Attached Images Last edited by chewychevy67; 02-03-2014 at 09:55 PM.

01-16-2014, 09:12 PM	#178
chewychevy67 Registered User Join Date: Jan 2010 Location: Here Posts: 5,539	Re: 67 GMC super custom build Im going to start working on my bed floor for the next month or so. also need to assemble the bed to fit the tailgate. heres what I have today. these have been wet sanded and look like a mirror. I still need to buy, stain and clear the center pieces. hope to have them soon and get some progress done. Attached Images

02-01-2014, 10:04 PM	#179
chewychevy67 Registered User Join Date: Jan 2010 Location: Here Posts: 5,539	Re: 67 GMC super custom build I got my a/c pump belt shields. These should help keep the oil off the underside of my hood lol. These are from 1968 era GM cars. look correct but the trucks never had them I don't think. Attached Images

02-02-2014, 06:45 PM	#180
duallyjams Registered User Join Date: May 2007 Location: Deale Md Posts: 4,663	Re: 67 GMC super custom build That's the first time I have seen those. __________________ James 63 GMC V6 4speed carryall 65 chevy swb bbw V8 auto 68 K20 327/4 speed, buddy buckets 2002 GMC CC Dually Duramax 64 GMC lwb 3/4 V6 4speed SOLD 66 GMC swb bbw buddy buckets SOLD IG duallyjams The only thing that stays the same is constant change!

02-03-2014, 02:53 AM	#181
nuke1 Registered User Join Date: Jun 2007 Location: Saskatoon, Saskatchewan,: Posts: 2,901	Re: 67 GMC super custom build just to let you know, you have done an amazing job so far on this truck, something to be realy proud of !!!! can not wait to finally go and see it. it was great to meet you and hope the future looks bright for out trucks!! lol I read your thread awhile ago but never commented, so i thought that i should finally. When you are in town one night let me know, i would liek to come and see the truck, and you should see Tylers 58, it is coming along nicely. __________________ James 1968 GMC "HAVOC" 1986 GMC "Frank" J.J.R.H. Design & Consulting My 68`Rebuild "HAVOC": http://67-72chevytrucks.com/vboard/s...d.php?t=316300 A 58' chev build thread: http://www.67-72chevytrucks.com/vboa...d.php?t=311238 1969 Camaro Pro Touring http://67-72chevytrucks.com/vboard/s...61#post3513361 Swiss Cheese: http://67-72chevytrucks.com/vboard/s...d.php?t=384390 Adjustable Trailing Arm How-To: http://67-72chevytrucks.com/vboard/s...d.php?t=321100 1968 Ford Farm Truck: http://67-72chevytrucks.com/vboard/s...=1#post6555587

02-03-2014, 03:00 PM	#182
chewychevy67 Registered User Join Date: Jan 2010 Location: Here Posts: 5,539	Re: 67 GMC super custom build I got my restored 67 only vent windows from Roger Koop today. They look nice. cant wait till the time comes to put them in. Attached Images

02-14-2014, 05:19 PM	#184
chewychevy67 Registered User Join Date: Jan 2010 Location: Here Posts: 5,539	Re: 67 GMC super custom build here is a pic of how I am going to run my vacuum gauge lines. Just tryin to get the little details done while I wait for my bed wood. Attached Images

03-14-2014, 06:09 PM	#185
chewychevy67 Registered User Join Date: Jan 2010 Location: Here Posts: 5,539	Re: 67 GMC super custom build I Finished restoring my original oil bath air cleaner today. I had it powder coated last summer and this week I went and bought some oil bath filter element made for restoration on older tractors. bought 4 bags of it and it worked out very nicely. here's some pic's . I also had an original style paper element air cleaner powder coated and have it as well. I may just use the oil bath for shows and run the paper element when I actually drive the truck (someday) but I guess well see. Attached Images Last edited by chewychevy67; 03-14-2014 at 06:16 PM.

03-14-2014, 06:23 PM	#186
chewychevy67 Registered User Join Date: Jan 2010 Location: Here Posts: 5,539	Re: 67 GMC super custom build Here are some of the paper element air cleaner and a few more oil bath. I took a few on the carb as well for you guys. Attached Images

03-16-2014, 01:47 AM	#190
nuke1 Registered User Join Date: Jun 2007 Location: Saskatoon, Saskatchewan,: Posts: 2,901	Re: 67 GMC super custom build looks really good Rod!! love the attention to detail. You are gonna have to let me know when you are back in town, it seems we keep missing each other. give me a call later. __________________ James 1968 GMC "HAVOC" 1986 GMC "Frank" J.J.R.H. Design & Consulting My 68`Rebuild "HAVOC": http://67-72chevytrucks.com/vboard/s...d.php?t=316300 A 58' chev build thread: http://www.67-72chevytrucks.com/vboa...d.php?t=311238 1969 Camaro Pro Touring http://67-72chevytrucks.com/vboard/s...61#post3513361 Swiss Cheese: http://67-72chevytrucks.com/vboard/s...d.php?t=384390 Adjustable Trailing Arm How-To: http://67-72chevytrucks.com/vboard/s...d.php?t=321100 1968 Ford Farm Truck: http://67-72chevytrucks.com/vboard/s...=1#post6555587

03-26-2014, 06:29 PM	#192
chewychevy67 Registered User Join Date: Jan 2010 Location: Here Posts: 5,539	Re: 67 GMC super custom build Here is something cool. I picked these new 1967 Saskatchewan licence plates up a few years ago on kijiji in the original packaging and thought I would share them with you. one pair is for trucks and the other pair is for passenger cars (maby for the matching 67 chevelle I also dream about having some day) and also I have a pair of 67 truck plates that I found in the buddy bucket counsel. I wont restore the originals being that I have new ones. these are cool. Attached Images

04-02-2014, 10:57 AM	#193
jmader Senior Member Join Date: Aug 2013 Location: Grand Island, NE Posts: 1,483	Re: 67 GMC super custom build Great build. This will be a great resource as I start to putting back together. Question- is your 327 original to your truck? If so could you tell me the head and intake casting numbers? Thanks! __________________ 1949 Chevy 3100 Five Window 1964 Chevy C10 Lambrecht Auction project 1967 Chevy SWB K10 1967 GMC K15 Project Build thread- http://67-72chevytrucks.com/vboard/s...72#post6502772 1968 Chevy Anniversary K10 1991 K5 4" Lift 35's (the wife's toy)

04-02-2014, 11:01 AM	#194
chewychevy67 Registered User Join Date: Jan 2010 Location: Here Posts: 5,539	Re: 67 GMC super custom build My engine is original but the intake is off of a 64 car. Tne original was missing. Sorry I couldnt help.

04-02-2014, 11:04 AM	#195
mcbassin Still Learning Join Date: Jul 2009 Location: Central Oklahoma Posts: 10,108	Re: 67 GMC super custom build That wood looks great! As does the rest of your parts. I had to use a cast iron starter nose on my 402. I just couldn't keep the aluminum ones from cracking or breaking off. Keep the pictures coming. __________________ Mike "69 Short Wide" My Project 86 Silverado Landen's Project Instagram: @mcbassin My Website C/10 Club Oklahoma Facebook Group



Register or Log In To remove these advertisements.

05-10-2014, 05:45 PM	#196
chewychevy67 Registered User Join Date: Jan 2010 Location: Here Posts: 5,539	Re: 67 GMC super custom build work has been slow as I am getting into my busy season at work. Dennis is having trouble making the mould for my new steering wheel so I thought I would share 2 pic's of what it will look like when finished. just used a blue wheel but when finished it will be red. the wheel is from a 1967 impala originally. Attached Images

06-06-2014, 09:07 PM	#197
chewychevy67 Registered User Join Date: Jan 2010 Location: Here Posts: 5,539	Re: 67 GMC super custom build I got board today so I assembled my engine to make sure everything fits as it should. Some pics for you guys. as soon as I have all the parts I will have the rest powder coated and the engine will get machined. Attached Images

07-02-2014, 07:10 PM	#198
chewychevy67 Registered User Join Date: Jan 2010 Location: Here Posts: 5,539	Re: 67 GMC super custom build A few more just in case someone needs photos of the 283/327 style air injection. Just not sure where the vacuum signal hose hooks up to. Attached Images

07-02-2014, 11:55 PM	#199
mcbassin Still Learning Join Date: Jul 2009 Location: Central Oklahoma Posts: 10,108	Re: 67 GMC super custom build Very nice work on the engine. I wish I could help you on the vacuum signal hose. __________________ Mike "69 Short Wide" My Project 86 Silverado Landen's Project Instagram: @mcbassin My Website C/10 Club Oklahoma Facebook Group

07-03-2014, 02:39 PM	#200
68Gold/white Registered User Join Date: Sep 2011 Location: Ark City, Kansas Posts: 3,387	Re: 67 GMC super custom build Who did you have build your carb??? The springs on the brake drums dampen vibration (however small they may be), already previously posted, allow for better brake operation, if thats possible w/ drum brakes, the springs ARE needed, couldn't hurt w/ heat dissipation either. What rear is that, maybe particular to the GMC leaf spring pickups??? or heavy duty option??? Never ever seen one of those alternators, good find on spare. I was at an NHRA drag race in Houston, Texas in 1990. There was a racer from your town. his name was Xenon Kotelko, the announcer enjoyed saying his name, and then the name of your city... Last edited by 68Gold/white; 07-03-2014 at 02:46 PM.

Register or Log In To remove these advertisements.