My 1967 Build (Finally)

[KyleSeal]

You can never have enough clamps. Getting this dash back in place wont be too difficult, but you can definitely see I'm in need of some more clamps, and here I was thinking I had enough

Also admiring the paint match on the dash to kick panel, not exact but close enough for government work!

[regan wilson]

Clamps and lots of them. That's good to know since I've never had one out. I'm sure that I will on my C-50. Good work Kyle.

[chewychevy67]

Your doing a nice job making sure you get as much creep rust as you can. It would be a disappointment if you got the whole cab done and 3 years later rust was appearing in spots. Going backwards is not fun. Keep up the good work

[KyleSeal]

Originally Posted by regan wilson

Clamps and lots of them. That's good to know since I've never had one out. I'm sure that I will on my C-50. Good work Kyle.

Ive never had one out either, this is my first one, but going well if I do say so myself. I was expecting a lot of work but its been rather straight forward. I had a small spot of rust breakthrough inside the driver side a-pillar where it met the dash, and had to cut the dash for the Vintage Air, so it made sense.

Originally Posted by chewychevy67

Your doing a nice job making sure you get as much creep rust as you can. It would be a disappointment if you got the whole cab done and 3 years later rust was appearing in spots. Going backwards is not fun. Keep up the good work

Like they say "while Im here..." but thats really what I keep coming back to, is thinking of going this far and not going a touch further and then having rust creep into the seams would be an incredible bummer. I appreciate it!

[KyleSeal]

Although Im a ways away from having the seat in its final spot, I just had to toss it in the truck and see how it felt, and man oh man Im happy with it. I think this seat will wear well and will really make this interior a talking point. I also want to thank n2billet for putting this design on his Tiffany. It was the inspiration for the layout of this bench.

[Marine15Z28]

Originally Posted by KyleSeal

Although Im a ways away from having the seat in its final spot, I just had to toss it in the truck and see how it felt, and man oh man Im happy with it. I think this seat will wear well and will really make this interior a talking point. I also want to thank n2billet for putting this design on his Tiffany. It was the inspiration for the layout of this bench.

Attachment 2251109 Attachment 2251110
Attachment 2251111

Who did your seat? I wanna do mine with that color vinyl
Posted via Mobile Device

[KyleSeal]

Originally Posted by Marine15Z28

Who did your seat? I wanna do mine with that color vinyl
Posted via Mobile Device

Lee's Upholstery in Newport News VA, Steven got the job right for me. Give them a call and Im sure they could send the material your way or get you the supplier.

[KyleSeal]

More pix.... because.... why not!

[KyleSeal]

Welded dash back in, and installed the Altman Easy Latches. Kind of looking like a truck now!

[KyleSeal]

Moving towards getting the roof installed, while I waited on the rain to stop so I could sandblast the new skin, I cleaned and painted the windshield pinchweld frame, after I ground down the dash welds. Once I had the roof blasted I etch primered and top coated with some black paint.

[KyleSeal]

Roof will be installed in the next week or so. I will be using the SEM panel bond glue to hold the rear seam down, I have spot weld punches every 6 inches or so, a bit closer in the front to keep it from lifting. I see a lot of people mixing these two practices together so I think this will hold well. My first time using it, so we will see.

[hewittca]

Excellent work and build thread! You've made quite a lot of progress in the last year.

[KyleSeal]

Originally Posted by hewittca

Excellent work and build thread! You've made quite a lot of progress in the last year.

Thank you! Funny you say that, it actually has been 1 year since I bought it (Jan 30th 2022). The only thing holding me up from moving forward is the weather. My garage is insulated but when its 35 outside it makes it 55 inside, and thats too cold for me to paint. So waiting for better weather to help me along!

[Stickman]

Did you drill and weld/fill all those tack welds around the perimeter of the firewall or fill and block the rest? Beautiful work.

[KyleSeal]

Originally Posted by Stickman

Did you drill and weld/fill all those tack welds around the perimeter of the firewall or fill and block the rest? Beautiful work.

I actually have not used any filler on the truck yet, just weld solid and grind flat with 36 grit discs/belts and then hit with 80 to clean the appearance. Areas welded that aren't exposed to everyone when assembled (cowl area and such) I will cover the welded area with seam sealer. Thanks!

[KyleSeal]

Hurry up and wait is the game here in my garage! Waiting on temps this week to reach 60, so I can glue my roof. Meanwhile, I decided to get a 8 inch booster and flush mount it, like how Delmo did on Nacho. I needed to ditch the bolt on the steering column bracket, so I decided to section in a new side to it to relocate the bolt hole. Im sure one bolt would have been fine, but I felt better with two. Recessed the firewall brace with some 1/8 plate, welded it all and repainted to match. No one will ever see it, but I will always know if I hack something

[KyleSeal]

Pix for others to use as reference if needed

[KyleSeal]

And the roof is ON! Fully glued and welded. I did this single handedly, what I did was put 2x4s under the roof skin in place, so I could put down the glue on each surface, and drop into place. It worked out just how I hoped. Now to let it sit for a day or so and cure!

[chewychevy67]

Awesome. Now you know rust won't be popping its head thru the windshield area in 20 months!

[SRU1436]

Very impressive, great job!

[hewittca]

Nice work! This is going to be one hell of a clean truck when you're done and something you can be proud of.

I'm going back to your brake system mod. I really like the flush mount idea. Is that one of those power brake kits with the weird mounting bracket and pivot that sets the booster way off the firewall? If so, I'm wondering if you plan to incorporate the pivot somehow or if you are worried about excessive pedal travel if you do not include it. I have that booster/master combo with the bracket/pivot and it works well as designed, it just looks terrible sticking so far off the firewall. I'd like to maybe do this mod as well.

[KyleSeal]

Originally Posted by chewychevy67

Awesome. Now you know rust won't be popping its head thru the windshield area in 20 months!

Thats right! This roof stuff has been a headache, but in the end I'd say its worth it. Learned a lot, and can say at the least it was effective.

Originally Posted by SRU1436

Very impressive, great job!

Thank you!

Originally Posted by hewittca

Nice work! This is going to be one hell of a clean truck when you're done and something you can be proud of.

I'm going back to your brake system mod. I really like the flush mount idea. Is that one of those power brake kits with the weird mounting bracket and pivot that sets the booster way off the firewall? If so, I'm wondering if you plan to incorporate the pivot somehow or if you are worried about excessive pedal travel if you do not include it. I have that booster/master combo with the bracket/pivot and it works well as designed, it just looks terrible sticking so far off the firewall. I'd like to maybe do this mod as well.

I got this setup off eBay, the 8inch dual diaphragm with a 1 1/8 disc/drum master, and it did come with the big bracket and bellcrank. I plan to do a direct mount of the pedal push rod, I am currently studying the design of the master/booster/push rod combo to understand what I need to do moving forward. What I understand is the factory manual brakes want 4:1 pedal ratio, and power brakes want 6:1, to my understanding I should be able to move the mounting point down 1" and accomplish something close to this, as long as it doesnt create a weird angle. I may end up modifying the pedal itself if thats the case.

[clay68c10]

Nice work!
You can't have too many clamps.

[KyleSeal]

and wrapping up my brake pedal pushrod situation. I decided to put the bellcrank under the dash by chopping up the bracket and welding it in place, this was all done to achieve a 4:1 pedal ratio. I cut a relief in the pedal assembly and bent some 1/8" plate to a smooth radius to reinforce where I removed, and welded in a 'leg' to support the bell crank pivot point. Brake spring clears after cutting the pivot shaft about 1/4", and I moved the pedal to bell crank push rod hole up .5" to make the ratio proper.

[KyleSeal]

This is the diagram I used:


source (with addt'l info):
https://shop.wilwood.com/blogs/news/...o%20of%209%3A1.