Project: Ginger - Page 8 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Painter D · 08-21-2011, 06:10 PM

Quote:

Originally Posted by lolife99

Yes.
It's the only one that runs right now. Ha.
I haven't done anything to it since you saw it last year.
I guess I'll be bringing it to the Kansas Goodguys event.

Good to know. Atleast you have truck(s) and a blazer you can work on, all I have is my Riviera......for now, and that's what I'm bringing to KS GG.

**lolife99** · 08-21-2011, 06:23 PM

Quote:

Originally Posted by 69chevyshort

Good to know. Atleast you have truck(s) and a blazer you can work on, all I have is my Riviera......for now, and that's what I'm bringing to KS GG.

It's a bagged '63 Riviera!
You know I love the Rivs.
I'm glad I will be able to check it out in person.

**lolife99** · 08-21-2011, 06:27 PM

As I previously posted,... I wasn't very happy with the window trim from Classic Parts.
If the trim got any kind of wrinkle in it while it was in the packaging,... it was there to stay.
Out it came.
$30 down the drain.

**lolife99** · 08-21-2011, 06:30 PM

I ordered new trim from Steele Rubber Products,... which was just PUI Interiors product dropped shipped to me.
These are much higher quality and have the small chrome bead along the top.
Much better!

**lolife99** · 08-21-2011, 06:39 PM

Since the window trim is finally done I installed the door panels.
Upper trim got beadblasted and painted a satin silver.

The original door panels on this truck had been "spray bombed" a color that was close to original,... but looked crappy.
I got these original paint door panels and arm rests from member Joesjunk.

orwold · 08-21-2011, 06:41 PM

[img]c10[/img]

**lolife99** · 08-21-2011, 06:47 PM

I have a pet peeve with the aftermarket interior door handles.
The first picture is a "Counterparts" brand interior handle from Classic Parts.
See how it sets on the splined shaft?
It either points up,... or points down.
The second picture is my NOS GM handles.
These are the ones I will be using.
I wish the aftermarket could get a few minor details right.

Now I'm looking for NOS window cranks.

mcbassin · 08-21-2011, 08:19 PM

Very nice work Keith! I know you are going to the KS GG show what about the one in Ft.Worth?

**lolife99** · 08-21-2011, 08:25 PM

Quote:

Originally Posted by mcbassin

Very nice work Keith! I know you are going to the KS GG show what about the one in Ft.Worth?

Not going to Fort Worth this year.
We'll be in Springfield, MO, that weekend... at the Street Machine Fall Nationals.
http://www.streetmachinenationals.net/event/198
My buddy hot trux and I are talking about heading to the Texas Goodguys event in the spring of 2012.

72BlckButy · 08-21-2011, 09:26 PM

Those door panels look good! Just can't wait to see what else you might have lurking around there for the interior.

The PUI window trim looks 10x better.

oldblue1968chevy · 08-21-2011, 10:32 PM

MAN Have you got some wonderful attention to detail!

**72 Super** · 08-22-2011, 07:46 PM

Quote:

Originally Posted by lolife99

Thanks,... I wish I was working in it.
Started the shop build in 2005.
Got the outside done,... and then got a divorce.
It's not finished on the inside.
It's mainly storage for my junk.
I work in my house garage,... for now.

Keith,

Sorry to hear about the divorce, also sorry to hear of your troubles with you 69. I really like that truck too! Your 70 is coming along nicely.

Ray

**lolife99** · 08-22-2011, 09:50 PM

Thanks.
I need to build another shop, so I can move all of my junk out of this one,... and finish it!

**lolife99** · 08-24-2011, 09:38 PM

I found these pics over at Nathan Porter's website,...www.PorterbuiltFabrication.com.
http://www.porterbuiltfabrication.co...ickman-Designs.

These are the amazing creations of Carter Hickman.
(of Carter Hickman Designs).
http://www.carterhickmandesigns.com/wordpress/

The only thing in common with Ginger,... is the basic color, and the fact that it's a '70 stepside.
I'm building the "beater version" of this truck.

Since I had no updates,... I had to post.

litew8 · 08-24-2011, 10:02 PM

Thanks for the info on the window trim Keith. Bout ready to purchase those items myself.
Did you by chance try and heat them (rubber trim) up to see if they smoothed out any? If they do, maybe you can sell and recoup some $$.
Can't blame you for your attention to detail on the inner handles, that'd drive me nuts if one was different than the other, knowing the AM was inferior that much more.

**lolife99** · 08-24-2011, 10:18 PM

Quote:

Originally Posted by litew8

Thanks for the info on the window trim Keith. Bout ready to purchase those items myself.
Did you by chance try and heat them (rubber trim) up to see if they smoothed out any? If they do, maybe you can sell and recoup some $$.
Can't blame you for your attention to detail on the inner handles, that'd drive me nuts if one was different than the other, knowing the AM was inferior that much more.

I didn't try to heat them.
I put the Classic Parts weatherstrip on my red '69,... and it wasn't too bad.
These looked terrible.

From now on,... I will alway buy the PUI Interiors part.
Much nicer.
But also more than double the price!

72BlckButy · 08-25-2011, 09:29 PM

I don't know when I squint... I see Ginger. Haha!

Yet another killer photoshop by Carter.

jcaugmented · 09-06-2011, 02:27 PM

great looking project man.

oldblue1968chevy · 09-06-2011, 03:12 PM

any updates

**lolife99** · 09-06-2011, 04:03 PM

Quote:

Originally Posted by oldblue1968chevy

any updates

None.
Probably not for a while.

gcburdic · 09-06-2011, 08:20 PM

I figured that heading out to that GG show would motivate ya Keith....but I guess it doesn't help with getting money to grow on trees though

**lolife99** · 09-06-2011, 08:38 PM

Quote:

Originally Posted by gcburdic

I figured that heading out to that GG show would motivate ya Keith....but I guess it doesn't help with getting money to grow on trees though

Goodguys is a reality check on my abilities.
I can't weld,... and that part sucks.
I will be mocking up the front clip soon.

I'd like to buy a mig welder soon,... but that takes away from truck money.
I spent a bunch recently on my red '69.
I'd like to have someone fix the rockers and rust issues on the blazer over the winter.

Having three trucks to work on, spreads me pretty thin money-wise.
I'm not sure what the plan is.

jasonhall · 09-06-2011, 10:10 PM

All three trucks kick A$$ . They will all look great in time

mcbassin · 09-06-2011, 10:53 PM

Quote:

Originally Posted by lolife99

Goodguys is a reality check on my abilities.
I can't weld,... and that part sucks.
I will be mocking up the front clip soon.

I'd like to buy a new mig welder soon,... but that takes away from truck money.
I spent a bunch recently on my red '69.
I'd like to have someone fix the rockers and rust issues on the blazer over the winter.

Having three trucks to work on, spreads me pretty thin money-wise.
I'm not sure what the plan is.

You may not be able to weld now but if you get a decent mig with gas you will be to do welds good enough for body work for sure.

If you were closer I would barter with you on the rocker replacement. That's a pretty easy task.

You ready to thin the herd so you can focus on one or two

**STP67-72** · 09-07-2011, 07:29 AM

Hey Keith
Just like Mcbassin said, if you were closer i would fix your rockers. Buy you a Good little 110 mig and start playing on some project. Heck put a rocker on one of your parts trucks for practice???? Nobody wanted to install rockers around here, so i had to figure it out. Im not a great welder, but damn good with a little grinder. Sell some of your parts LOL

Good luck

08-21-2011, 06:27 PM	#178
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,694	Re: Project: Ginger As I previously posted,... I wasn't very happy with the window trim from Classic Parts. If the trim got any kind of wrinkle in it while it was in the packaging,... it was there to stay. Out it came. $30 down the drain. Attached Images __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823

08-21-2011, 06:30 PM	#179
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,694	Re: Project: Ginger I ordered new trim from Steele Rubber Products,... which was just PUI Interiors product dropped shipped to me. These are much higher quality and have the small chrome bead along the top. Much better! Attached Images __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823

08-21-2011, 06:39 PM	#180
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,694	Re: Project: Ginger Since the window trim is finally done I installed the door panels. Upper trim got beadblasted and painted a satin silver. The original door panels on this truck had been "spray bombed" a color that was close to original,... but looked crappy. I got these original paint door panels and arm rests from member Joesjunk. Attached Images __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823

08-21-2011, 06:41 PM	#181
orwold Registered User Join Date: Aug 2011 Location: Trondheim Norway Posts: 1	Re: Project: Ginger [img]c10[/img]

08-21-2011, 06:47 PM	#182
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,694	Re: Project: Ginger I have a pet peeve with the aftermarket interior door handles. The first picture is a "Counterparts" brand interior handle from Classic Parts. See how it sets on the splined shaft? It either points up,... or points down. The second picture is my NOS GM handles. These are the ones I will be using. I wish the aftermarket could get a few minor details right. Now I'm looking for NOS window cranks. Attached Images __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823

08-21-2011, 08:19 PM	#183
mcbassin Still Learning Join Date: Jul 2009 Location: Central Oklahoma Posts: 10,108	Re: Project: Ginger Very nice work Keith! I know you are going to the KS GG show what about the one in Ft.Worth? __________________ Mike "69 Short Wide" My Project 86 Silverado Landen's Project Instagram: @mcbassin My Website C/10 Club Oklahoma Facebook Group

08-21-2011, 09:26 PM	#185
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	Re: Project: Ginger Those door panels look good! Just can't wait to see what else you might have lurking around there for the interior. The PUI window trim looks 10x better. __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package)

08-21-2011, 10:32 PM	#186
oldblue1968chevy Grandpa in the rustmobile... Join Date: Nov 2008 Location: Spokane WA/Viola TN Posts: 11,422	Re: Project: Ginger MAN Have you got some wonderful attention to detail! __________________ John Goose-1968 C10 355,9.32-1CR, Vortec Heads ,262 voodoo, 3.73:1 3OTT (HS ride/beater/farm truck) http://67-72chevytrucks.com/vboard/s...d.php?t=317684 Grams 53-1953 Chevrolet Belair http://67-72chevytrucks.com/vboard/s...=1#post4327784 1969 Chevy C10 Shortbed 4.5/6?" Frame off resto http://67-72chevytrucks.com/vboard/s...d.php?t=548136 1999 Toyota Tacoma 4x4

08-22-2011, 09:50 PM	#188
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,694	Re: Project: Ginger Thanks. I need to build another shop, so I can move all of my junk out of this one,... and finish it! __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823

08-24-2011, 09:38 PM	#189
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,694	Re: Project: Ginger I found these pics over at Nathan Porter's website,...www.PorterbuiltFabrication.com. http://www.porterbuiltfabrication.co...ickman-Designs. These are the amazing creations of Carter Hickman. (of Carter Hickman Designs). http://www.carterhickmandesigns.com/wordpress/ The only thing in common with Ginger,... is the basic color, and the fact that it's a '70 stepside. I'm building the "beater version" of this truck. Since I had no updates,... I had to post. Attached Images __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823 Last edited by lolife99; 08-25-2011 at 06:30 AM.

08-24-2011, 10:02 PM	#190
litew8 Registered User Join Date: Jul 2011 Location: Des Moines, Iowa Posts: 3,016	Re: Project: Ginger Thanks for the info on the window trim Keith. Bout ready to purchase those items myself. Did you by chance try and heat them (rubber trim) up to see if they smoothed out any? If they do, maybe you can sell and recoup some $$. Can't blame you for your attention to detail on the inner handles, that'd drive me nuts if one was different than the other, knowing the AM was inferior that much more. __________________ project: "my happy mess"

08-25-2011, 09:29 PM	#192
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	Re: Project: Ginger I don't know when I squint... I see Ginger. Haha! Yet another killer photoshop by Carter. __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package)

09-06-2011, 03:12 PM	#194
oldblue1968chevy Grandpa in the rustmobile... Join Date: Nov 2008 Location: Spokane WA/Viola TN Posts: 11,422	Re: Project: Ginger any updates __________________ John Goose-1968 C10 355,9.32-1CR, Vortec Heads ,262 voodoo, 3.73:1 3OTT (HS ride/beater/farm truck) http://67-72chevytrucks.com/vboard/s...d.php?t=317684 Grams 53-1953 Chevrolet Belair http://67-72chevytrucks.com/vboard/s...=1#post4327784 1969 Chevy C10 Shortbed 4.5/6?" Frame off resto http://67-72chevytrucks.com/vboard/s...d.php?t=548136 1999 Toyota Tacoma 4x4

09-06-2011, 08:20 PM	#196
gcburdic Restoration Virgin! Join Date: Jan 2008 Location: Huntersville, NC Posts: 8,298	Re: Project: Ginger I figured that heading out to that GG show would motivate ya Keith....but I guess it doesn't help with getting money to grow on trees though __________________ Geoff with a G 1968 Chevy C10 SWB The Mistress 1972 Custom Deluxe C20 Suburban A Suburban Named Isabella 1966 Ford Mustang Mama's High School Graduation Present

09-06-2011, 10:10 PM	#198
jasonhall Registered User Join Date: May 2008 Location: Stillwater Oklahoma Posts: 829	Re: Project: Ginger All three trucks kick A$$ . They will all look great in time



Register or Log In To remove these advertisements.

09-07-2011, 07:29 AM	#200
STP67-72 Senior Member Join Date: Jan 2002 Location: PORT NECHES, TEXAS / USA Posts: 1,666	Re: Project: Ginger Hey Keith Just like Mcbassin said, if you were closer i would fix your rockers. Buy you a Good little 110 mig and start playing on some project. Heck put a rocker on one of your parts trucks for practice???? Nobody wanted to install rockers around here, so i had to figure it out. Im not a great welder, but damn good with a little grinder. Sell some of your parts LOL Good luck __________________ 55 Chevy original swb (big back window) 61 Chevy bubble top (427-5 speed) 67 Chevy stepside (Krusty) 68 Chevy swb fleet (Lola) 68 Chevy swb fleet 71 Chevy swb fleet ( future PB project) 97 crew cab power stroke 07 SS Trail blazer

Register or Log In To remove these advertisements.