Creamsicle: My 70 K10 SWB is about to get sweeter

[1972CST]

What an incredible build! You really have something to be proud of!

How did you like the Advance Adapter kit for the 4L60E to NP205?
I have heard mixed reviews.

[derotoreut]

Originally Posted by 1972CST

What an incredible build! You really have something to be proud of!

How did you like the Advance Adapter kit for the 4L60E to NP205?
I have heard mixed reviews.

Thank you for the compliment.

I had no issues with the Advance Adapter kit. What have you heard and what are the problems?

[1972CST]

Originally Posted by derotoreut

Thank you for the compliment.

I had no issues with the Advance Adapter kit. What have you heard and what are the problems?

I have heard modifications were needed for the mount and inner drive sleeve that was not described in the instructions from AA.

[derotoreut]

Originally Posted by 1972CST

I have heard modifications were needed for the mount and inner drive sleeve that was not described in the instructions from AA.

I did not experience these problems. Plus any questions that I did have were answered by calling their technical support line.

[First c10]

Truck looks great Dan I can’t wait to be able to say I am done other than a few things.
Enjoy that thing.....

[derotoreut]

Originally Posted by First c10

Truck looks great Dan I can’t wait to be able to say I am done other than a few things.
Enjoy that thing.....

Thank you. You'll get there. In the meantime I'll keep watching your build. You're going a great job. Next up is my 71 swb. I need to get back on that build.

[IronCanine]

Turned out really great Dan. Well done. Thanks for sharing.

[derotoreut]

Originally Posted by IronCanine

Turned out really great Dan. Well done. Thanks for sharing.

Thanks. That means a lot coming from a TOTM winner!

[derotoreut]

Just another update from last week. On Aug-12th I installed the front speakers to complete my stereo installation.

Stereo:

• Retrosound Long Beach with Motor-4 body
• USB/Aux installed in original cigarette lighter location
• External microphone for bluetooth phone operation

Front Speakers:

• Kicker model CSC65
• 6-1/2" Round, 300 watt max
• Installed in front vent panel in Retrosound speaker mounts

Rear Speakers:

• Kicker model CSC693
• 6"X9", 450 watt max
• Installed in rear cab corners speaker mounts from board member "Bigblock73"

Retrosound Long Beach with USB/Aux in cigarette lighter location


Front passenger side speaker


Front driver side speaker




External microphone for bluetooth phone operation

[tim71]

I'm late to the party, just now stumbled across your build. Really enjoyed going thru your build postings. Congrats on a great build and a stunning truck.

[First c10]

Good morning Dan. I sent you a pm.

[derotoreut]

I've come to the conclusion that these trucks are like owning a home... You're never done working on them. My wife calls me the "Lowes Man", because Lowes' motto is "Never Stop Improving".

Well I decided to swap out my front Dana 44 drum axle with a newer mid 80's disc brake axle. I know that since I have the 1970 axle that I could've just rebuilt mine by swapping out components from the knuckles out, but I decided to do an axle swap. By the way, if anyone is interested in the 70 (one year only) drum axle let me know. I plan to sell it.

Time to remove this axle


Done. Axle is out.

[derotoreut]

Over the summer I found that I had some oil drips coming from my oil pan. I decided while I had the front axle out that I would correct the problem. Well I made two mistakes. The first one was using a fabricated oil pan. The Tilden pan is nice, but I think it contributed to my slow leaks. The second mistake I made was trying to change the pan gasket with the engine in place. I thought that maybe there would be enough clearance to be able to pull the oil pan out if I disconnected the motor mounts and jacked up the front of the engine. Well that didn't work. Maybe I should've tried to slide the crossmember forward to remove the pan instead. In the end I was able to get the old pan gasket out and a new one in. I know you're not supposed to use any sealant with the LS style oil pan gaskets, but I decided to put a thin film on the surface anyway. I just didn't trust the sealing surface of the fabricated pan. Unfortunately, I don't have much confidence that just replacing the gasket and re-torquing is going to solve the problem. I'll keep my fingers crossed and see what happens come spring.

Oil pan dropped down to remove old gasket


Front of engine jacked up for clearance.


Had to remove the pickup tube in place. What a mistake and PITA.


New gasket put in place.


New gasket installed and ready to button it up.

[scottmitchellrose]

Originally Posted by derotoreut

Over the summer I found that I had some oil drips coming from my oil pan. I decided while I had the front axle out that I would correct the problem. Well I made two mistakes. The first one was using a fabricated oil pan. The Tilden pan is nice, but I think it contributed to my slow leaks. The second mistake I made was trying to change the pan gasket with the engine in place. I thought that maybe there would be enough clearance to be able to pull the oil pan out if I disconnected the motor mounts and jacked up the front of the engine. Well that didn't work. Maybe I should've tried to slide the crossmember forward to remove the pan instead. In the end I was able to get the old pan gasket out and a new one in. I know you're not supposed to use any sealant with the LS style oil pan gaskets, but I decided to put a thin film on the surface anyway. I just didn't trust the sealing surface of the fabricated pan. Unfortunately, I don't have much confidence that just replacing the gasket and re-torquing is going to solve the problem. I'll keep my fingers crossed and see what happens come spring.

Oil pan dropped down to remove old gasket
Attachment 2082763

Front of engine jacked up for clearance.
Attachment 2082764

Had to remove the pickup tube in place. What a mistake and PITA.
Attachment 2082765

New gasket put in place.
Attachment 2082766

New gasket installed and ready to button it up.
Attachment 2082767

I've heard the camaro pans work great with this swap.

[57taskforce]

Man that’s a shame it’s leaking, that sure is a nice looking pan. Nice work overall. That’s such a great looking truck, you’ve done a great job!

[derotoreut]

Originally Posted by 57taskforce

Man that’s a shame it’s leaking, that sure is a nice looking pan. Nice work overall. That’s such a great looking truck, you’ve done a great job!

It is a nice looking pan, but I think the fabricated pans just don't stack up to a cast/machined pan. It's reinforced around the bolting flange, but IMO the mating surface just isn't strong enough and flat enough like a machined surface pan. Thanks for the compliments.

[4thgencreamsicle]

No idea how I missed this thread! Beautiful truck! We’re getting my own creamsicle going. My kids named ours the Creamsicle even though I had just always called it Grandpa Bill’s truck. It’s my great grandpa’s truck that my Dad put into his construction crew fleet for awhile so it’s got some pretty redneck/grandpa style fixes on it. We’re working through those kinks and hope to have it running & driving by the new year.

[derotoreut]

Originally Posted by 4thgencreamsicle

No idea how I missed this thread! Beautiful truck! We’re getting my own creamsicle going. My kids named ours the Creamsicle even though I had just always called it Grandpa Bill’s truck. It’s my great grandpa’s truck that my Dad put into his construction crew fleet for awhile so it’s got some pretty redneck/grandpa style fixes on it. We’re working through those kinks and hope to have it running & driving by the new year.

Can't wait to see it. Do you have any pictures or build thread?

[4thgencreamsicle]

Originally Posted by derotoreut

Can't wait to see it. Do you have any pictures or build thread?

I don’t have a build thread on here, but probably should since I’m on here all the time. I’ve been keeping track of our progress on my Instagram page ( chronic_creamsicle ).

Meanwhile here’s a picture. I’m keeping the “patina” since it’s always been a work truck until I got ahold of it. 😎 This pic was a few years ago, but apparently it’s one of the only full body shots I have. I need to wash her and get a better one.