DJ JR's Build Thread - Page 8 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

djracer · 09-06-2012, 12:00 AM

Sounds like a plan. Pm me your digits.

Super73 · 09-12-2012, 01:35 AM

Can't wait to see it in action!!

djracer · 09-13-2012, 12:49 AM

Quote:

Originally Posted by Super73

Can't wait to see it in action!!

I can't wait either. I am gonna try to get some gauges in it this weekend and finish up some wiring. I got to get some miles on it before Cruisin the Coast. I probably won't beat on it too hard at the track till after that. I have been to cruisin the coast for the last three years wishing I had this truck done.

djracer · 09-17-2012, 12:01 AM

Custom made dash speaker mount with to 5.25 Polk Audio Coax's.

Starting to look like a truck again. I'm gonna try to get a tag and insurance this week. I want to put some miles on it before Cruisin The Coast!

Started on the gauge cluster but I have a really long way to go. All Autometer Pro Comp gauges mounted behind a stock bezel.

noonzor · 09-17-2012, 09:53 AM

looking great!

djracer · 09-23-2012, 11:24 PM

New Teeth

phipp13 · 09-23-2012, 11:53 PM

sweet truck JR.!!!!

djracer · 09-30-2012, 02:48 PM

Couple of pics from Yesterday.

noonzor · 09-30-2012, 03:57 PM

sweeet!!!

bigboybodry · 09-30-2012, 09:57 PM

Looking great brother can't wait to see y'all crusin the strip at ctc in it.

djracer · 10-01-2012, 12:42 AM

Quote:

Originally Posted by bigboybodry

Looking great brother can't wait to see y'all crusin the strip at ctc in it.

I hope. It kicked my tail tonight.

bigboybodry · 10-01-2012, 01:36 PM

Quote:

Originally Posted by djracer

I hope. It kicked my tail tonight.

What all are you lacking, can I help in any way?

djracer · 10-01-2012, 06:23 PM

Quote:

Originally Posted by bigboybodry

What all are you lacking, can I help in any way?

Only way you could help much would be a road trip. But thanks for the thought. I am just a little lacking in the spare time department. Cross your finger's I don't have a cam problem.

It's coming along slow but sure. I may have a cam problem and If I do that will probably kill it coming to CTC. Fixin to go out in the shop and get back on it.

Not running that great yet I got a few bugs to get out.

bigguy69 · 10-01-2012, 09:11 AM

Man that truck is sharp

C20-67_N_MO · 10-01-2012, 05:22 PM

Wow guys!

Truck really turned out great!

So how's does it run?

bigboybodry · 10-01-2012, 06:57 PM

I hope there not the same cam problems I was facing killing distributor gears.

bigboybodry · 10-02-2012, 09:03 AM

What master cylinder is that I am needing one?

djracer · 10-02-2012, 07:47 PM

It's a factory Chrysler Master Cylinder. I had one on the drag truck and it went bad. I crossed reference the dorman number on summits website. I already had the Tank and a reman was 20.00 at Oreillys. The complete unit is 28 at Summit. You do have to widen out the mounting holes a little and change your fittings on your lines. Also front line is close to the firewall and rear line is to the front. (learned that the hard way)

djracer · 10-03-2012, 08:25 AM

A Few updated pics.

djracer · 10-04-2012, 07:50 AM

Lowered the front last night and installed the new front shocks. Gonna try to get the gauges in the dash tonight and get an alignment tomorrow. My 3 3/8 water temp gauge is sent off at the moment. The Thermo coupler was bad. I hope it makes it back before Cruisin the Coast.

bigboybodry · 10-04-2012, 08:20 AM

Quote:

Originally Posted by djracer

Lowered the front last night and installed the new front shocks. Gonna try to get the gauges in the dash tonight and get an alignment tomorrow. My 3 3/8 water temp gauge is sent off at the moment. The Thermo coupler was bad. I hope it makes it back before Cruisin the Coast.

did you find the cam issue?

djracer · 10-04-2012, 08:22 AM

I think I have it straightened out. Gonna try to drive it some this weekend.

bigboybodry · 10-04-2012, 06:21 PM

Awsome!!!!!

djracer · 10-09-2012, 09:04 PM

Headed to the shop for a few finishing touches before we leave for Cruisin the Coast!

djracer · 10-11-2012, 01:48 AM

Cade drives his truck to school for the first time.

a couple more pics

09-06-2012, 12:00 AM	#1
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,891	Re: DJ JR's Build Thread Sounds like a plan. Pm me your digits. __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

09-12-2012, 01:35 AM	#2
Super73 Registered User Join Date: Nov 2007 Location: Bay Area, Ca Posts: 2,841	Re: DJ JR's Build Thread Can't wait to see it in action!! __________________ ------Motor---------------Bottle 60'---1.53---------------1.41 1/8---6.58 @ 105.92----5.87 @ 118.41 1/4---10.38 @ 126.97----9.24 @ 142.49

09-17-2012, 12:01 AM	#4
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,891	Re: DJ JR's Build Thread Custom made dash speaker mount with to 5.25 Polk Audio Coax's. Starting to look like a truck again. I'm gonna try to get a tag and insurance this week. I want to put some miles on it before Cruisin The Coast! Started on the gauge cluster but I have a really long way to go. All Autometer Pro Comp gauges mounted behind a stock bezel. __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

09-17-2012, 09:53 AM	#5
noonzor Registered User Join Date: Aug 2009 Location: Edmonton, Alberta Posts: 818	Re: DJ JR's Build Thread looking great! __________________ 69 c10 Shortbox Build http://67-72chevytrucks.com/vboard/s...d.php?t=360622

09-23-2012, 11:24 PM	#6
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,891	Re: DJ JR's Build Thread New Teeth __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

09-23-2012, 11:53 PM	#7
phipp13 THE DAMN YANKEE Join Date: Sep 2006 Location: Southern MD Posts: 551	Re: DJ JR's Build Thread sweet truck JR.!!!!

09-30-2012, 02:48 PM	#8
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,891	Re: DJ JR's Build Thread Couple of pics from Yesterday. __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

09-30-2012, 03:57 PM	#9
noonzor Registered User Join Date: Aug 2009 Location: Edmonton, Alberta Posts: 818	Re: DJ JR's Build Thread sweeet!!! __________________ 69 c10 Shortbox Build http://67-72chevytrucks.com/vboard/s...d.php?t=360622

09-30-2012, 09:57 PM	#10
bigboybodry Registered User Join Date: Jul 2009 Location: Florence,Mississippi Posts: 301	Re: DJ JR's Build Thread Looking great brother can't wait to see y'all crusin the strip at ctc in it. __________________ first track pass with the new motor on motor http://youtu.be/YgrJaEF_TaQ

10-01-2012, 09:11 AM	#14
bigguy69 dazed and confused Join Date: Jul 2008 Location: marion nc Posts: 1,649	Re: DJ JR's Build Thread Man that truck is sharp __________________ members met: redbaron69, billsbowtie,nc67

10-01-2012, 05:22 PM	#15
C20-67_N_MO Champagne Taste on Beer Budget Join Date: Dec 2008 Location: High Ridge, Missouri Posts: 2,190	Re: DJ JR's Build Thread Wow guys! Truck really turned out great! So how's does it run? __________________ Coming Soon: Project 1970 Country Truck

10-01-2012, 06:57 PM	#16
bigboybodry Registered User Join Date: Jul 2009 Location: Florence,Mississippi Posts: 301	Re: DJ JR's Build Thread I hope there not the same cam problems I was facing killing distributor gears. __________________ first track pass with the new motor on motor http://youtu.be/YgrJaEF_TaQ

10-02-2012, 09:03 AM	#17
bigboybodry Registered User Join Date: Jul 2009 Location: Florence,Mississippi Posts: 301	Re: DJ JR's Build Thread What master cylinder is that I am needing one? __________________ first track pass with the new motor on motor http://youtu.be/YgrJaEF_TaQ

10-02-2012, 07:47 PM	#18
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,891	Re: DJ JR's Build Thread It's a factory Chrysler Master Cylinder. I had one on the drag truck and it went bad. I crossed reference the dorman number on summits website. I already had the Tank and a reman was 20.00 at Oreillys. The complete unit is 28 at Summit. You do have to widen out the mounting holes a little and change your fittings on your lines. Also front line is close to the firewall and rear line is to the front. (learned that the hard way) __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

10-03-2012, 08:25 AM	#19
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,891	Re: DJ JR's Build Thread A Few updated pics. __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!



Register or Log In To remove these advertisements.

10-04-2012, 07:50 AM	#20
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,891	Re: DJ JR's Build Thread Lowered the front last night and installed the new front shocks. Gonna try to get the gauges in the dash tonight and get an alignment tomorrow. My 3 3/8 water temp gauge is sent off at the moment. The Thermo coupler was bad. I hope it makes it back before Cruisin the Coast. __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

10-04-2012, 08:22 AM	#22
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,891	Re: DJ JR's Build Thread I think I have it straightened out. Gonna try to drive it some this weekend. __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

10-04-2012, 06:21 PM	#23
bigboybodry Registered User Join Date: Jul 2009 Location: Florence,Mississippi Posts: 301	Re: DJ JR's Build Thread Awsome!!!!! __________________ first track pass with the new motor on motor http://youtu.be/YgrJaEF_TaQ

10-09-2012, 09:04 PM	#24
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,891	Re: DJ JR's Build Thread Headed to the shop for a few finishing touches before we leave for Cruisin the Coast! __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

10-11-2012, 01:48 AM	#25
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,891	Re: DJ JR's Build Thread Cade drives his truck to school for the first time. a couple more pics __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

Register or Log In To remove these advertisements.