The GSFMech Build - Page 8 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

msgross · 08-06-2009, 09:36 PM

I love it...

**GSFMECH** · 08-26-2009, 09:54 PM

Sorry I have not been on in a while, thanks for all the compliments.

aboyer- I have 275-60-15's on the rear with 8" rims and 245-60-15's on the front with 7" rims. I have no tire rub at all, no complaints. I've had it lowered since 2001.

72SHORTBED 72- I'm not sure what you are asking but I think you are talking about the tailgate trim? It is a stock piece that came on the higher trim level trucks, it has screws that hold it on and covers the letters stamped in the tailgate.

Steven, I have that AC blowing cold and have since installed a Performer RPM intake, new valve covers and air breather identical to the ones I had and I finally shelved my points even though I didn't really want to and went with a pertronix ignition.

Thanks again everyone.

**GSFMECH** · 04-13-2013, 01:08 AM

Well I have not added anything to this build in a really long time and I have made many changes. I’ll try and catch it up, I should have done this a long time ago. I ran into so many members at Goodguys in Texas and no one knew my truck from the board…. It had been that long. Anyway here are a few shots when I redid my exhaust. The old system drug on everything you passed over so I fabricated a new system to tuck it up higher. My flash went out in the camera so please excuse the dark pics. I bought a new set of Hooker 2" long tube headers for a Chevelle to try and get some ground clearance and it looks like I picked up about 2 to 3". Plus I got rid of the ugly exhaust pipes hanging out underneath. You can see the new tubular crossmember I built plus the holes in the center crossmember for the pipes in these shots.

**GSFMECH** · 04-13-2013, 01:10 AM

I had just started building the exhaust system here so it was only tacked together.

**GSFMECH** · 04-13-2013, 01:11 AM

Here a couple of shots of the exhaust all welded up and painted

**GSFMECH** · 04-13-2013, 01:13 AM

Here are some shots of the mufflers I used

**GSFMECH** · 04-13-2013, 01:15 AM

Random shots after it was installed

**GSFMECH** · 04-13-2013, 01:16 AM

A few more, sorry they are so dark

**GSFMECH** · 04-13-2013, 02:08 AM

Next up was to lower it a little more in the rear. I wanted a set of Coys and I borrowed a buddy mines wheels to test fit. It sat WAY too high in the rear. I bought the CPP C-Notch kit and 2" lowering blocks. I won’t into detail installing the C- notches because there are so many posts already about it on here, but here a few pics while I was doing it.

**GSFMECH** · 04-13-2013, 02:10 AM

OK here it is back on the ground still with the 15” wheels, looks kinda funny without the rake it had for so long

**GSFMECH** · 04-13-2013, 02:12 AM

The new wheels picked it back up almost to where it was, I think I'm a 1/2" lower in the back than I was originally and I have some of my rake back which I like but it's not as much as before which is a good thing. I think it sits just right. These are not the greatest pics but at least you see what it looks like.

northern 85 · 04-13-2013, 07:25 AM

Looks GREAT! How about a vid so we can hear the new pipes!

**Palf70Step** · 04-13-2013, 07:26 AM

I like it. That tri pack manifold is still screaming for ya Mike!

**GSFMECH** · 04-13-2013, 10:05 AM

Bill, you know that's right. There is nothing I would love better but the bucks $$$$$$ are keeping me away.

Zoomin · 04-13-2013, 11:54 AM

Love the new wheels, sweet truck!
Posted via Mobile Device

**GSFMECH** · 04-13-2013, 09:13 PM

Here are a few more things I added, I know I’m missing a lot I did to it over the last couple of years. First was this awesome Pro6Ten compressor. I got tired of fighting the A6 compressors from the parts stores.

**GSFMECH** · 04-13-2013, 09:17 PM

I also changed the radiator out for a new Murray 4-core from O'Riellys (the old one was toast), added a Stewart high flow thermostat, stuffed a 2 speed Deraile fan in between the condensor and the radiator and added an edelbrock aluminum waterpump. The fan is only for the AC while in traffic. This thing is running cool now. I also changed out the carb for a fresher 850. Somewhere along the way I installed a Performer RPM manifold as well.

**GSFMECH** · 04-13-2013, 09:20 PM

I got my new Powermaster 100 amp alternator installed.

**GSFMECH** · 04-13-2013, 09:24 PM

Look what my wife got me, I thought it was cool.

**GSFMECH** · 04-13-2013, 09:26 PM

Next I redid the interior, it was starting to show its age plus I always wanted the hounds tooth upholstery. I had a spare set of buckets so I redid them. I stripped and blasted them, repainted and installed new foams and covers. I also stripped the console down to freshen it up. The old seats went to a new home

**GSFMECH** · 04-13-2013, 09:27 PM

The finished product

**GSFMECH** · 04-13-2013, 09:29 PM

I redyed the seat belts, they were so faded that they were almost green. I took the buckles apart as well and re-sprayed them. I used Rit dye from walmart for the belts themselves and as you can see the results speak for themselves. You can see the comparison next to an old belt.

**GSFMECH** · 04-13-2013, 09:31 PM

Here is the finished interior. New carpet and matching gas tank cover as well.

**GSFMECH** · 04-13-2013, 09:35 PM

A few shots of the truck as it is now.

darkhorse970 · 04-13-2013, 09:53 PM

It is an awesome looking truck, it hauls a$$, and it gets driven quite a bit...what else could any of us wish for?!?!?! I love it Mike!

08-06-2009, 09:36 PM	#176
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: The GSFMech Build I love it... __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer"

08-26-2009, 09:54 PM	#177
GSFMECH On the road Join Date: Jan 2004 Location: NATCHITOCHES LOUISIANA Posts: 818	Re: The GSFMech Build Sorry I have not been on in a while, thanks for all the compliments. aboyer- I have 275-60-15's on the rear with 8" rims and 245-60-15's on the front with 7" rims. I have no tire rub at all, no complaints. I've had it lowered since 2001. 72SHORTBED 72- I'm not sure what you are asking but I think you are talking about the tailgate trim? It is a stock piece that came on the higher trim level trucks, it has screws that hold it on and covers the letters stamped in the tailgate. Steven, I have that AC blowing cold and have since installed a Performer RPM intake, new valve covers and air breather identical to the ones I had and I finally shelved my points even though I didn't really want to and went with a pertronix ignition. Thanks again everyone. __________________ Mike Castro- 72 SWB. Ochre and White. 496/400 turbo, GV OD ,Dakota Digital dash , tilt, Vintage Air, PS, hydro boost, factory buckets, console, QA-1 Coil over suspension, 20/20"Billet Specialties Magnetos 72 SWB. Med blue. 454/400 turbo, tach, tilt, Stock AC, PS,PDB, factory buckets, console, ECE 4/6 drop w/ 2" blocks and C-notch, 20/20"Coys- Crashed and destroyed by drunk driver Sept 2019. New 72 build in the works. My new build thread "Castro" https://67-72chevytrucks.com/vboard/...d.php?t=820934 My old build thread, the blue truck http://67-72chevytrucks.com/vboard/s...d.php?t=271489 www.louisianaclassictruckclub.com

04-13-2013, 01:08 AM	#178
GSFMECH On the road Join Date: Jan 2004 Location: NATCHITOCHES LOUISIANA Posts: 818	Re: The GSFMech Build Well I have not added anything to this build in a really long time and I have made many changes. I’ll try and catch it up, I should have done this a long time ago. I ran into so many members at Goodguys in Texas and no one knew my truck from the board…. It had been that long. Anyway here are a few shots when I redid my exhaust. The old system drug on everything you passed over so I fabricated a new system to tuck it up higher. My flash went out in the camera so please excuse the dark pics. I bought a new set of Hooker 2" long tube headers for a Chevelle to try and get some ground clearance and it looks like I picked up about 2 to 3". Plus I got rid of the ugly exhaust pipes hanging out underneath. You can see the new tubular crossmember I built plus the holes in the center crossmember for the pipes in these shots. Attached Images __________________ Mike Castro- 72 SWB. Ochre and White. 496/400 turbo, GV OD ,Dakota Digital dash , tilt, Vintage Air, PS, hydro boost, factory buckets, console, QA-1 Coil over suspension, 20/20"Billet Specialties Magnetos 72 SWB. Med blue. 454/400 turbo, tach, tilt, Stock AC, PS,PDB, factory buckets, console, ECE 4/6 drop w/ 2" blocks and C-notch, 20/20"Coys- Crashed and destroyed by drunk driver Sept 2019. New 72 build in the works. My new build thread "Castro" https://67-72chevytrucks.com/vboard/...d.php?t=820934 My old build thread, the blue truck http://67-72chevytrucks.com/vboard/s...d.php?t=271489 www.louisianaclassictruckclub.com

04-13-2013, 01:10 AM	#179
GSFMECH On the road Join Date: Jan 2004 Location: NATCHITOCHES LOUISIANA Posts: 818	Re: The GSFMech Build I had just started building the exhaust system here so it was only tacked together. Attached Images __________________ Mike Castro- 72 SWB. Ochre and White. 496/400 turbo, GV OD ,Dakota Digital dash , tilt, Vintage Air, PS, hydro boost, factory buckets, console, QA-1 Coil over suspension, 20/20"Billet Specialties Magnetos 72 SWB. Med blue. 454/400 turbo, tach, tilt, Stock AC, PS,PDB, factory buckets, console, ECE 4/6 drop w/ 2" blocks and C-notch, 20/20"Coys- Crashed and destroyed by drunk driver Sept 2019. New 72 build in the works. My new build thread "Castro" https://67-72chevytrucks.com/vboard/...d.php?t=820934 My old build thread, the blue truck http://67-72chevytrucks.com/vboard/s...d.php?t=271489 www.louisianaclassictruckclub.com

04-13-2013, 01:11 AM	#180
GSFMECH On the road Join Date: Jan 2004 Location: NATCHITOCHES LOUISIANA Posts: 818	Re: The GSFMech Build Here a couple of shots of the exhaust all welded up and painted Attached Images __________________ Mike Castro- 72 SWB. Ochre and White. 496/400 turbo, GV OD ,Dakota Digital dash , tilt, Vintage Air, PS, hydro boost, factory buckets, console, QA-1 Coil over suspension, 20/20"Billet Specialties Magnetos 72 SWB. Med blue. 454/400 turbo, tach, tilt, Stock AC, PS,PDB, factory buckets, console, ECE 4/6 drop w/ 2" blocks and C-notch, 20/20"Coys- Crashed and destroyed by drunk driver Sept 2019. New 72 build in the works. My new build thread "Castro" https://67-72chevytrucks.com/vboard/...d.php?t=820934 My old build thread, the blue truck http://67-72chevytrucks.com/vboard/s...d.php?t=271489 www.louisianaclassictruckclub.com

04-13-2013, 01:13 AM	#181
GSFMECH On the road Join Date: Jan 2004 Location: NATCHITOCHES LOUISIANA Posts: 818	Re: The GSFMech Build Here are some shots of the mufflers I used Attached Images __________________ Mike Castro- 72 SWB. Ochre and White. 496/400 turbo, GV OD ,Dakota Digital dash , tilt, Vintage Air, PS, hydro boost, factory buckets, console, QA-1 Coil over suspension, 20/20"Billet Specialties Magnetos 72 SWB. Med blue. 454/400 turbo, tach, tilt, Stock AC, PS,PDB, factory buckets, console, ECE 4/6 drop w/ 2" blocks and C-notch, 20/20"Coys- Crashed and destroyed by drunk driver Sept 2019. New 72 build in the works. My new build thread "Castro" https://67-72chevytrucks.com/vboard/...d.php?t=820934 My old build thread, the blue truck http://67-72chevytrucks.com/vboard/s...d.php?t=271489 www.louisianaclassictruckclub.com

04-13-2013, 01:15 AM	#182
GSFMECH On the road Join Date: Jan 2004 Location: NATCHITOCHES LOUISIANA Posts: 818	Re: The GSFMech Build Random shots after it was installed Attached Images __________________ Mike Castro- 72 SWB. Ochre and White. 496/400 turbo, GV OD ,Dakota Digital dash , tilt, Vintage Air, PS, hydro boost, factory buckets, console, QA-1 Coil over suspension, 20/20"Billet Specialties Magnetos 72 SWB. Med blue. 454/400 turbo, tach, tilt, Stock AC, PS,PDB, factory buckets, console, ECE 4/6 drop w/ 2" blocks and C-notch, 20/20"Coys- Crashed and destroyed by drunk driver Sept 2019. New 72 build in the works. My new build thread "Castro" https://67-72chevytrucks.com/vboard/...d.php?t=820934 My old build thread, the blue truck http://67-72chevytrucks.com/vboard/s...d.php?t=271489 www.louisianaclassictruckclub.com

04-13-2013, 01:16 AM	#183
GSFMECH On the road Join Date: Jan 2004 Location: NATCHITOCHES LOUISIANA Posts: 818	Re: The GSFMech Build A few more, sorry they are so dark Attached Images __________________ Mike Castro- 72 SWB. Ochre and White. 496/400 turbo, GV OD ,Dakota Digital dash , tilt, Vintage Air, PS, hydro boost, factory buckets, console, QA-1 Coil over suspension, 20/20"Billet Specialties Magnetos 72 SWB. Med blue. 454/400 turbo, tach, tilt, Stock AC, PS,PDB, factory buckets, console, ECE 4/6 drop w/ 2" blocks and C-notch, 20/20"Coys- Crashed and destroyed by drunk driver Sept 2019. New 72 build in the works. My new build thread "Castro" https://67-72chevytrucks.com/vboard/...d.php?t=820934 My old build thread, the blue truck http://67-72chevytrucks.com/vboard/s...d.php?t=271489 www.louisianaclassictruckclub.com

04-13-2013, 02:08 AM	#184
GSFMECH On the road Join Date: Jan 2004 Location: NATCHITOCHES LOUISIANA Posts: 818	Re: The GSFMech Build Next up was to lower it a little more in the rear. I wanted a set of Coys and I borrowed a buddy mines wheels to test fit. It sat WAY too high in the rear. I bought the CPP C-Notch kit and 2" lowering blocks. I won’t into detail installing the C- notches because there are so many posts already about it on here, but here a few pics while I was doing it. Attached Images __________________ Mike Castro- 72 SWB. Ochre and White. 496/400 turbo, GV OD ,Dakota Digital dash , tilt, Vintage Air, PS, hydro boost, factory buckets, console, QA-1 Coil over suspension, 20/20"Billet Specialties Magnetos 72 SWB. Med blue. 454/400 turbo, tach, tilt, Stock AC, PS,PDB, factory buckets, console, ECE 4/6 drop w/ 2" blocks and C-notch, 20/20"Coys- Crashed and destroyed by drunk driver Sept 2019. New 72 build in the works. My new build thread "Castro" https://67-72chevytrucks.com/vboard/...d.php?t=820934 My old build thread, the blue truck http://67-72chevytrucks.com/vboard/s...d.php?t=271489 www.louisianaclassictruckclub.com

04-13-2013, 02:10 AM	#185
GSFMECH On the road Join Date: Jan 2004 Location: NATCHITOCHES LOUISIANA Posts: 818	Re: The GSFMech Build OK here it is back on the ground still with the 15” wheels, looks kinda funny without the rake it had for so long Attached Images __________________ Mike Castro- 72 SWB. Ochre and White. 496/400 turbo, GV OD ,Dakota Digital dash , tilt, Vintage Air, PS, hydro boost, factory buckets, console, QA-1 Coil over suspension, 20/20"Billet Specialties Magnetos 72 SWB. Med blue. 454/400 turbo, tach, tilt, Stock AC, PS,PDB, factory buckets, console, ECE 4/6 drop w/ 2" blocks and C-notch, 20/20"Coys- Crashed and destroyed by drunk driver Sept 2019. New 72 build in the works. My new build thread "Castro" https://67-72chevytrucks.com/vboard/...d.php?t=820934 My old build thread, the blue truck http://67-72chevytrucks.com/vboard/s...d.php?t=271489 www.louisianaclassictruckclub.com

04-13-2013, 02:12 AM	#186
GSFMECH On the road Join Date: Jan 2004 Location: NATCHITOCHES LOUISIANA Posts: 818	Re: The GSFMech Build The new wheels picked it back up almost to where it was, I think I'm a 1/2" lower in the back than I was originally and I have some of my rake back which I like but it's not as much as before which is a good thing. I think it sits just right. These are not the greatest pics but at least you see what it looks like. Attached Images __________________ Mike Castro- 72 SWB. Ochre and White. 496/400 turbo, GV OD ,Dakota Digital dash , tilt, Vintage Air, PS, hydro boost, factory buckets, console, QA-1 Coil over suspension, 20/20"Billet Specialties Magnetos 72 SWB. Med blue. 454/400 turbo, tach, tilt, Stock AC, PS,PDB, factory buckets, console, ECE 4/6 drop w/ 2" blocks and C-notch, 20/20"Coys- Crashed and destroyed by drunk driver Sept 2019. New 72 build in the works. My new build thread "Castro" https://67-72chevytrucks.com/vboard/...d.php?t=820934 My old build thread, the blue truck http://67-72chevytrucks.com/vboard/s...d.php?t=271489 www.louisianaclassictruckclub.com

04-13-2013, 07:25 AM	#187
northern 85 Registered User Join Date: Mar 2005 Location: Fairfield Maine Posts: 1,759	Re: The GSFMech Build Looks GREAT! How about a vid so we can hear the new pipes!

04-13-2013, 07:26 AM	#188
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 47,262	Re: The GSFMech Build I like it. That tri pack manifold is still screaming for ya Mike! __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!

04-13-2013, 10:05 AM	#189
GSFMECH On the road Join Date: Jan 2004 Location: NATCHITOCHES LOUISIANA Posts: 818	Re: The GSFMech Build Bill, you know that's right. There is nothing I would love better but the bucks $$$$$$ are keeping me away. __________________ Mike Castro- 72 SWB. Ochre and White. 496/400 turbo, GV OD ,Dakota Digital dash , tilt, Vintage Air, PS, hydro boost, factory buckets, console, QA-1 Coil over suspension, 20/20"Billet Specialties Magnetos 72 SWB. Med blue. 454/400 turbo, tach, tilt, Stock AC, PS,PDB, factory buckets, console, ECE 4/6 drop w/ 2" blocks and C-notch, 20/20"Coys- Crashed and destroyed by drunk driver Sept 2019. New 72 build in the works. My new build thread "Castro" https://67-72chevytrucks.com/vboard/...d.php?t=820934 My old build thread, the blue truck http://67-72chevytrucks.com/vboard/s...d.php?t=271489 www.louisianaclassictruckclub.com

04-13-2013, 11:54 AM	#190
Zoomin Man of Mini-Talents Join Date: Sep 2009 Location: Oklahoma City, OK Posts: 4,295	Re: The GSFMech Build Love the new wheels, sweet truck! Posted via Mobile Device __________________ Steve Project - Ruth 66 Skylark Project - Lola 60 Biscayne Project - Iron Ox 54 GMC 100 Project - Darth 69 Camaro



Register or Log In To remove these advertisements.

04-13-2013, 09:13 PM	#191
GSFMECH On the road Join Date: Jan 2004 Location: NATCHITOCHES LOUISIANA Posts: 818	Re: The GSFMech Build Here are a few more things I added, I know I’m missing a lot I did to it over the last couple of years. First was this awesome Pro6Ten compressor. I got tired of fighting the A6 compressors from the parts stores. Attached Images __________________ Mike Castro- 72 SWB. Ochre and White. 496/400 turbo, GV OD ,Dakota Digital dash , tilt, Vintage Air, PS, hydro boost, factory buckets, console, QA-1 Coil over suspension, 20/20"Billet Specialties Magnetos 72 SWB. Med blue. 454/400 turbo, tach, tilt, Stock AC, PS,PDB, factory buckets, console, ECE 4/6 drop w/ 2" blocks and C-notch, 20/20"Coys- Crashed and destroyed by drunk driver Sept 2019. New 72 build in the works. My new build thread "Castro" https://67-72chevytrucks.com/vboard/...d.php?t=820934 My old build thread, the blue truck http://67-72chevytrucks.com/vboard/s...d.php?t=271489 www.louisianaclassictruckclub.com

04-13-2013, 09:17 PM	#192
GSFMECH On the road Join Date: Jan 2004 Location: NATCHITOCHES LOUISIANA Posts: 818	Re: The GSFMech Build I also changed the radiator out for a new Murray 4-core from O'Riellys (the old one was toast), added a Stewart high flow thermostat, stuffed a 2 speed Deraile fan in between the condensor and the radiator and added an edelbrock aluminum waterpump. The fan is only for the AC while in traffic. This thing is running cool now. I also changed out the carb for a fresher 850. Somewhere along the way I installed a Performer RPM manifold as well. Attached Images __________________ Mike Castro- 72 SWB. Ochre and White. 496/400 turbo, GV OD ,Dakota Digital dash , tilt, Vintage Air, PS, hydro boost, factory buckets, console, QA-1 Coil over suspension, 20/20"Billet Specialties Magnetos 72 SWB. Med blue. 454/400 turbo, tach, tilt, Stock AC, PS,PDB, factory buckets, console, ECE 4/6 drop w/ 2" blocks and C-notch, 20/20"Coys- Crashed and destroyed by drunk driver Sept 2019. New 72 build in the works. My new build thread "Castro" https://67-72chevytrucks.com/vboard/...d.php?t=820934 My old build thread, the blue truck http://67-72chevytrucks.com/vboard/s...d.php?t=271489 www.louisianaclassictruckclub.com

04-13-2013, 09:20 PM	#193
GSFMECH On the road Join Date: Jan 2004 Location: NATCHITOCHES LOUISIANA Posts: 818	Re: The GSFMech Build I got my new Powermaster 100 amp alternator installed. Attached Images __________________ Mike Castro- 72 SWB. Ochre and White. 496/400 turbo, GV OD ,Dakota Digital dash , tilt, Vintage Air, PS, hydro boost, factory buckets, console, QA-1 Coil over suspension, 20/20"Billet Specialties Magnetos 72 SWB. Med blue. 454/400 turbo, tach, tilt, Stock AC, PS,PDB, factory buckets, console, ECE 4/6 drop w/ 2" blocks and C-notch, 20/20"Coys- Crashed and destroyed by drunk driver Sept 2019. New 72 build in the works. My new build thread "Castro" https://67-72chevytrucks.com/vboard/...d.php?t=820934 My old build thread, the blue truck http://67-72chevytrucks.com/vboard/s...d.php?t=271489 www.louisianaclassictruckclub.com

04-13-2013, 09:24 PM	#194
GSFMECH On the road Join Date: Jan 2004 Location: NATCHITOCHES LOUISIANA Posts: 818	Re: The GSFMech Build Look what my wife got me, I thought it was cool. Attached Images __________________ Mike Castro- 72 SWB. Ochre and White. 496/400 turbo, GV OD ,Dakota Digital dash , tilt, Vintage Air, PS, hydro boost, factory buckets, console, QA-1 Coil over suspension, 20/20"Billet Specialties Magnetos 72 SWB. Med blue. 454/400 turbo, tach, tilt, Stock AC, PS,PDB, factory buckets, console, ECE 4/6 drop w/ 2" blocks and C-notch, 20/20"Coys- Crashed and destroyed by drunk driver Sept 2019. New 72 build in the works. My new build thread "Castro" https://67-72chevytrucks.com/vboard/...d.php?t=820934 My old build thread, the blue truck http://67-72chevytrucks.com/vboard/s...d.php?t=271489 www.louisianaclassictruckclub.com

04-13-2013, 09:26 PM	#195
GSFMECH On the road Join Date: Jan 2004 Location: NATCHITOCHES LOUISIANA Posts: 818	Re: The GSFMech Build Next I redid the interior, it was starting to show its age plus I always wanted the hounds tooth upholstery. I had a spare set of buckets so I redid them. I stripped and blasted them, repainted and installed new foams and covers. I also stripped the console down to freshen it up. The old seats went to a new home Attached Images __________________ Mike Castro- 72 SWB. Ochre and White. 496/400 turbo, GV OD ,Dakota Digital dash , tilt, Vintage Air, PS, hydro boost, factory buckets, console, QA-1 Coil over suspension, 20/20"Billet Specialties Magnetos 72 SWB. Med blue. 454/400 turbo, tach, tilt, Stock AC, PS,PDB, factory buckets, console, ECE 4/6 drop w/ 2" blocks and C-notch, 20/20"Coys- Crashed and destroyed by drunk driver Sept 2019. New 72 build in the works. My new build thread "Castro" https://67-72chevytrucks.com/vboard/...d.php?t=820934 My old build thread, the blue truck http://67-72chevytrucks.com/vboard/s...d.php?t=271489 www.louisianaclassictruckclub.com

04-13-2013, 09:27 PM	#196
GSFMECH On the road Join Date: Jan 2004 Location: NATCHITOCHES LOUISIANA Posts: 818	Re: The GSFMech Build The finished product Attached Images __________________ Mike Castro- 72 SWB. Ochre and White. 496/400 turbo, GV OD ,Dakota Digital dash , tilt, Vintage Air, PS, hydro boost, factory buckets, console, QA-1 Coil over suspension, 20/20"Billet Specialties Magnetos 72 SWB. Med blue. 454/400 turbo, tach, tilt, Stock AC, PS,PDB, factory buckets, console, ECE 4/6 drop w/ 2" blocks and C-notch, 20/20"Coys- Crashed and destroyed by drunk driver Sept 2019. New 72 build in the works. My new build thread "Castro" https://67-72chevytrucks.com/vboard/...d.php?t=820934 My old build thread, the blue truck http://67-72chevytrucks.com/vboard/s...d.php?t=271489 www.louisianaclassictruckclub.com

04-13-2013, 09:29 PM	#197
GSFMECH On the road Join Date: Jan 2004 Location: NATCHITOCHES LOUISIANA Posts: 818	Re: The GSFMech Build I redyed the seat belts, they were so faded that they were almost green. I took the buckles apart as well and re-sprayed them. I used Rit dye from walmart for the belts themselves and as you can see the results speak for themselves. You can see the comparison next to an old belt. Attached Images __________________ Mike Castro- 72 SWB. Ochre and White. 496/400 turbo, GV OD ,Dakota Digital dash , tilt, Vintage Air, PS, hydro boost, factory buckets, console, QA-1 Coil over suspension, 20/20"Billet Specialties Magnetos 72 SWB. Med blue. 454/400 turbo, tach, tilt, Stock AC, PS,PDB, factory buckets, console, ECE 4/6 drop w/ 2" blocks and C-notch, 20/20"Coys- Crashed and destroyed by drunk driver Sept 2019. New 72 build in the works. My new build thread "Castro" https://67-72chevytrucks.com/vboard/...d.php?t=820934 My old build thread, the blue truck http://67-72chevytrucks.com/vboard/s...d.php?t=271489 www.louisianaclassictruckclub.com

04-13-2013, 09:31 PM	#198
GSFMECH On the road Join Date: Jan 2004 Location: NATCHITOCHES LOUISIANA Posts: 818	Re: The GSFMech Build Here is the finished interior. New carpet and matching gas tank cover as well. Attached Images __________________ Mike Castro- 72 SWB. Ochre and White. 496/400 turbo, GV OD ,Dakota Digital dash , tilt, Vintage Air, PS, hydro boost, factory buckets, console, QA-1 Coil over suspension, 20/20"Billet Specialties Magnetos 72 SWB. Med blue. 454/400 turbo, tach, tilt, Stock AC, PS,PDB, factory buckets, console, ECE 4/6 drop w/ 2" blocks and C-notch, 20/20"Coys- Crashed and destroyed by drunk driver Sept 2019. New 72 build in the works. My new build thread "Castro" https://67-72chevytrucks.com/vboard/...d.php?t=820934 My old build thread, the blue truck http://67-72chevytrucks.com/vboard/s...d.php?t=271489 www.louisianaclassictruckclub.com

04-13-2013, 09:35 PM	#199
GSFMECH On the road Join Date: Jan 2004 Location: NATCHITOCHES LOUISIANA Posts: 818	Re: The GSFMech Build A few shots of the truck as it is now. Attached Images __________________ Mike Castro- 72 SWB. Ochre and White. 496/400 turbo, GV OD ,Dakota Digital dash , tilt, Vintage Air, PS, hydro boost, factory buckets, console, QA-1 Coil over suspension, 20/20"Billet Specialties Magnetos 72 SWB. Med blue. 454/400 turbo, tach, tilt, Stock AC, PS,PDB, factory buckets, console, ECE 4/6 drop w/ 2" blocks and C-notch, 20/20"Coys- Crashed and destroyed by drunk driver Sept 2019. New 72 build in the works. My new build thread "Castro" https://67-72chevytrucks.com/vboard/...d.php?t=820934 My old build thread, the blue truck http://67-72chevytrucks.com/vboard/s...d.php?t=271489 www.louisianaclassictruckclub.com

04-13-2013, 09:53 PM	#200
darkhorse970 Registered User Join Date: May 2009 Location: Monroe, LA Posts: 2,104	Re: The GSFMech Build It is an awesome looking truck, it hauls a$$, and it gets driven quite a bit...what else could any of us wish for?!?!?! I love it Mike! __________________ Keith SOLD - 1963 C10 Short Fleet 350/700R4 4/6 drop 1967 GMC Super Custom - Short Fleet COPO concept w/427 BBC T-400 w/Doug Nash overdrive 4/6 Drop, Buddy Buckets, etc... Frame Off (In Progress) I call it "Vulgar Display of Power" 1980 Silverado Original paint 49k Original miles 4/6 drop Check out my build thread here: http://67-72chevytrucks.com/vboard/s...=1#post6209941

Register or Log In To remove these advertisements.