LS swappers, post up your pics!! - Page 8 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

85burb · 03-06-2012, 12:38 AM

That is one clean swap. Burb looks pretty good too!

awhite4557 · 03-06-2012, 12:54 AM

Quote:

Originally Posted by y5mgisi

Mine 99% done.

And the truck.

Just a thought, your fan is not spaced properly to cool. It should be 1/3 in the sroud and 2/3rds out. If it runs hot this may be the reason. Looks great.

52 Rat · 03-12-2012, 01:32 PM

Got the lq4 started this weekend. This is a short clip of the first start up. The engine sounds good and has quick revs. Aluminum flywheel and a good tune help the revs. I can't wait to get it on the road but I have a lot of work yet before that happens.

http://www.youtube.com/watch?v=JrE2u...ature=youtu.be

y5mgisi · 03-12-2012, 08:37 PM

Quote:

Originally Posted by awhite4557

Just a thought, your fan is not spaced properly to cool. It should be 1/3 in the sroud and 2/3rds out. If it runs hot this may be the reason. Looks great.

Yea i know. Not sure what im going to do about it just yet. Im not interested in going with electric fans and they dont make spacers. So far what i have found is they do make adapters to go from the threaded style fan to the old bolt style. So, i could get one of those and use my old fan and easily space it however i want with the normal style spacers. So far it seems to be working like it is. Had it idling in the driveway for about a half an hour and it stayed right at 196 the whole time. But, that was like a 50* day. It remains to be seen how it would handle stop and go traffic on a 90* day. Time will tell. Thanks for the complements!

y5mgisi · 03-12-2012, 08:38 PM

Quote:

Originally Posted by 52 Rat

Got the lq4 started this weekend. This is a short clip of the first start up. The engine sounds good and has quick revs. Aluminum flywheel and a good tune help the revs. I can't wait to get it on the road but I have a lot of work yet before that happens.

http://www.youtube.com/watch?v=JrE2u...ature=youtu.be

Sounds great!

smokedat · 03-15-2012, 09:32 PM

it fits

widewhite70 · 04-15-2012, 01:24 PM

Here's a few of mine, its out of an 05' Chevy SSR. We made the headers, put an edelbrock pro-flo intake, corvette water pump and front brackets, SLP under drive harmonic balancer

mooseknuckles · 04-15-2012, 03:15 PM

I'm lovin that edelbrock intake...

heavy_chevy · 04-15-2012, 11:45 PM

Yes I was just thinking the same thing. That is a good looking intake.

widewhite70 · 04-17-2012, 10:18 PM

Quote:

Originally Posted by mooseknuckles

I'm lovin that edelbrock intake...

Quote:

Originally Posted by heavy_chevy

Yes I was just thinking the same thing. That is a good looking intake.

Thanks guys! I knew when I first saw that intake it was going to have to go on my engine! Mine had the plastic big truck intake and it was UGLY lol

themb2g · 04-17-2012, 10:34 PM

Quote:

Originally Posted by widewhite70

Thanks guys! I knew when I first saw that intake it was going to have to go on my engine! Mine had the plastic big truck intake and it was UGLY lol

If anyone else is looking to do the same thing, i have the fuel rails for sale. I decided to go with the F.A.S.T. LSXRT intake on mine instead but cant return the rails.

52 Rat · 04-18-2012, 09:09 AM

Quote:

Originally Posted by themb2g

If anyone else is looking to do the same thing, i have the fuel rails for sale. I decided to go with the F.A.S.T. LSXRT intake on mine instead but cant return the rails.

Fuel rails for the Edelbrock intake? If so, yes I am interested in them.

SamMargritz00 · 04-20-2012, 03:23 PM

i have pics of the engine bay on my phone ill get posted up later.

butch86 · 04-23-2012, 10:36 AM

Quote:

Originally Posted by widewhite70

Here's a few of mine, its out of an 05' Chevy SSR. We made the headers, put an edelbrock pro-flo intake, corvette water pump and front brackets, SLP under drive harmonic balancer

that is a awsome awsome looking set-up you have there that intake makes the whole engine bay look sweet as hello

74project · 05-09-2012, 11:59 AM

79 chevy k10 5.3 out of a wrecked avalanche

my4by2 · 05-15-2012, 09:44 AM

It's getting MUCH closer to being completed & is now running & driving as well!!! Engine & engine bay will be painted & detailed once it gets to Novelli Rod & Custom.

91blkstpsd · 05-16-2012, 11:16 AM

Mine's not as old as the rest of yours but here is my 93 Silverado with 5.3L/5speed swap.
2004 5.3L DBW
original NV3500 trans (for now, I have a 4500 thats going in it soon)
Harness and tune by PSI (Performance Systems Integration)
Transdapt mounts
Schoenfeld headers
34" big block radiator
06 Silverado electric fans
tons of other small things

mac72 · 05-16-2012, 02:40 PM

How do like the fitment of the schoenfelds & transdapt adapters?

gringoloco · 05-16-2012, 04:39 PM

Quote:

Originally Posted by 91blkstpsd

...here is my 93 Silverado with 5.3L/5speed swap.

Love this truck-- great work-- looks factory

Oval55rag · 05-16-2012, 09:58 PM

New motor 2003 5.3L w/ milled 799 heads, comp cam, tbss intake mani, fast 92, 2002 F-body headers, Summit UD pulley, th400, 3500 stall. runs 12.8 @98.36

85burb · 05-16-2012, 11:04 PM

Quote:

Originally Posted by 91blkstpsd

Mine's not as old as the rest of yours but here is my 93 Silverado with 5.3L/5speed swap.
2004 5.3L DBW
original NV3500 trans (for now, I have a 4500 thats going in it soon)
Harness and tune by PSI (Performance Systems Integration)
Transdapt mounts
Schoenfeld headers
34" big block radiator
06 Silverado electric fans
tons of other small things

That looks amazing!
Posted via Mobile Device

68GMCCustom · 05-16-2012, 11:16 PM

yeah those 3 piece covers look much better then most of whats available... for the trucks.

91blkstpsd · 05-17-2012, 09:32 AM

Thanks guys! The headers fit great and Im pleased with them. However the black coating they came with was almost wore off in the box, so I ceramic coated them before putting them on.

whitels1 · 05-20-2012, 10:53 PM

Quote:

Originally Posted by my4by2

It's getting MUCH closer to being completed & is now running & driving as well!!! Engine & engine bay will be painted & detailed once it gets to Novelli Rod & Custom.

I really like the way you did your air box, I'm still up in the air how I will do mine, I'm currently swapping an LS into my 81 K5, so far I have started the mock up process, waiting on some parts to show up, still have to run the harness etc.

RatRod68 · 05-21-2012, 09:17 AM

Hey gents, I have a question....

My 68 has the LS1 in it, and i have been using a Mr. Gasket/Spectre universal throttle cable, since i am using the factory C10 pedal. The only issue is that i have replaced this sucker 3 times already, and it just broke again. I am tired of replacing this with something that will fail again.

What are you all using for your throttle cable??

I know a lot of you guys are running the DBW setup, but this is more directed at the cable swappers

Any Help would be greatly appreciated!!

03-06-2012, 12:38 AM	#176
85burb Registered User Join Date: Dec 2009 Location: lindale,tx Posts: 2,373	Re: LS swappers, post up your pics!! That is one clean swap. Burb looks pretty good too! __________________ 82 c10 5.3/4l60 84 c20 5.3/sm465 85 chevy k10 suburban LQ4/4l60 91 chevy c10 suburban Lsa 5.3/4l60 2017 Silverado whipple 5.3 1964 Vw beetle 1974 vw beetle

03-12-2012, 01:32 PM	#178
52 Rat Registered User Join Date: Aug 2010 Location: Asheville, NC Posts: 291	Re: LS swappers, post up your pics!! Got the lq4 started this weekend. This is a short clip of the first start up. The engine sounds good and has quick revs. Aluminum flywheel and a good tune help the revs. I can't wait to get it on the road but I have a lot of work yet before that happens. http://www.youtube.com/watch?v=JrE2u...ature=youtu.be __________________ My build project http://67-72chevytrucks.com/vboard/s...=1#post4158671

03-15-2012, 09:32 PM	#181
smokedat Registered User Join Date: Nov 2009 Location: santa paula Ca Posts: 772	Re: LS swappers, post up your pics!! it fits Attached Images __________________ Alex - Dirty AL "One Piece at a Time" Follow me on Instagram alex.barr.ios

04-15-2012, 01:24 PM	#182
widewhite70 Registered User Join Date: Apr 2010 Location: Coshocton,Ohio Posts: 834	Re: LS swappers, post up your pics!! Here's a few of mine, its out of an 05' Chevy SSR. We made the headers, put an edelbrock pro-flo intake, corvette water pump and front brackets, SLP under drive harmonic balancer Attached Images __________________ -Calvin http://67-72chevytrucks.com/vboard/s...d.php?t=512270 my build, tube chassis and LS2 How I keep the truck shining, Detail thread: http://67-72chevytrucks.com/vboard/s...d.php?t=697902

04-15-2012, 03:15 PM	#183
mooseknuckles Registered User Join Date: Sep 2009 Location: ottawa,canada Posts: 4,550	Re: LS swappers, post up your pics!! I'm lovin that edelbrock intake... __________________ my build threads '86 C10 http://67-72chevytrucks.com/vboard/s...d.php?t=415628 '67 C10 http://67-72chevytrucks.com/vboard/s...d.php?t=635078 '63 GMC http://67-72chevytrucks.com/vboard/s...d.php?t=674682

04-15-2012, 11:45 PM	#184
heavy_chevy Registered User Join Date: Jan 2010 Location: Keller, TX Posts: 32	Re: LS swappers, post up your pics!! Yes I was just thinking the same thing. That is a good looking intake.

04-20-2012, 03:23 PM	#188
SamMargritz00 Registered User Join Date: May 2011 Location: Hershey, Nebraska Posts: 319	Re: LS swappers, post up your pics!! i have pics of the engine bay on my phone ill get posted up later. Attached Images

05-09-2012, 11:59 AM	#190
74project Registered User Join Date: May 2009 Location: Las Vegas Posts: 216	Re: LS swappers, post up your pics!! 79 chevy k10 5.3 out of a wrecked avalanche Attached Images

05-15-2012, 09:44 AM	#191
my4by2 Registered User Join Date: Dec 2010 Location: Hot Springs, AR. Posts: 1,215	Re: LS swappers, post up your pics!! It's getting MUCH closer to being completed & is now running & driving as well!!! Engine & engine bay will be painted & detailed once it gets to Novelli Rod & Custom. Attached Images

05-16-2012, 11:16 AM	#192
91blkstpsd Registered User Join Date: Feb 2010 Location: Manchester, TN Posts: 17	Re: LS swappers, post up your pics!! Mine's not as old as the rest of yours but here is my 93 Silverado with 5.3L/5speed swap. 2004 5.3L DBW original NV3500 trans (for now, I have a 4500 thats going in it soon) Harness and tune by PSI (Performance Systems Integration) Transdapt mounts Schoenfeld headers 34" big block radiator 06 Silverado electric fans tons of other small things __________________ -Drew http://www.facebook.com/#!/newdrewman '06 CC Z71, 6" RCX, 35" Trail Grapplers, 18" Addicts '91 Stepside, LT1, 5"-6", 20" Coys, painted interior, etc. '93 RCSB, 5.3L, 5 spd, 5-7, 20"s

05-16-2012, 02:40 PM	#193
mac72 Registered User Join Date: Dec 2008 Location: port charlotte,florida Posts: 384	Re: LS swappers, post up your pics!! How do like the fitment of the schoenfelds & transdapt adapters?

05-16-2012, 09:58 PM	#195
Oval55rag Registered User Join Date: Nov 2009 Location: Daly city ca Posts: 18	Re: LS swappers, post up your pics!! New motor 2003 5.3L w/ milled 799 heads, comp cam, tbss intake mani, fast 92, 2002 F-body headers, Summit UD pulley, th400, 3500 stall. runs 12.8 @98.36 Attached Images __________________ 67 short step LQ9 TH400

05-16-2012, 11:16 PM	#197
68GMCCustom Truck and auto performance nut Join Date: Feb 2007 Location: McKinney,Texas Posts: 3,848	Re: LS swappers, post up your pics!! yeah those 3 piece covers look much better then most of whats available... for the trucks. __________________ Kurt - '68 GMC short step - NIB '09 LY6 6.0L crate motor w/mods, NIB '12 crate 4L85e w/billet 3k stall Circle D, 3.73 posi 12 bolt, DynaTech f-swap headers, 3/4 drop, handling mods, etc. - my toy '72 Chevy LWB C-10 Highlander - 350/350 ps/pb/tilt/ac - not original but close '06 Chevy TrailBlazerSS - LS2/4L70e - little black hot rod SUV - my DD '18 Kia Sorento - wife's econo-driver '95 Chevy S10 - reg cab shortbed, LS, 4.3, auto... my '68's powertrain and chassis build -links broken A surprise phase - carb to efi -links broken

05-17-2012, 09:32 AM	#198
91blkstpsd Registered User Join Date: Feb 2010 Location: Manchester, TN Posts: 17	Re: LS swappers, post up your pics!! Thanks guys! The headers fit great and Im pleased with them. However the black coating they came with was almost wore off in the box, so I ceramic coated them before putting them on. __________________ -Drew http://www.facebook.com/#!/newdrewman '06 CC Z71, 6" RCX, 35" Trail Grapplers, 18" Addicts '91 Stepside, LT1, 5"-6", 20" Coys, painted interior, etc. '93 RCSB, 5.3L, 5 spd, 5-7, 20"s

05-21-2012, 09:17 AM	#200
RatRod68 Registered User Join Date: Aug 2007 Location: Kentucky Posts: 828	Re: LS swappers, post up your pics!! Hey gents, I have a question.... My 68 has the LS1 in it, and i have been using a Mr. Gasket/Spectre universal throttle cable, since i am using the factory C10 pedal. The only issue is that i have replaced this sucker 3 times already, and it just broke again. I am tired of replacing this with something that will fail again. What are you all using for your throttle cable?? I know a lot of you guys are running the DBW setup, but this is more directed at the cable swappers Any Help would be greatly appreciated!! __________________ build Threads: Nasty 68 C10. My lil hotrod Leftovers 68 C20 D-Ranged Ford Ranger on steroids Semper Fi



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.