my "71 C10 project - Page 8 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

RexDodge · 05-05-2013, 09:57 AM

Ok, I am still alive and kicking. In the home stretch of a couple of bathroom remodels. Meanwhile the LMC boxes are piling up

. Drywall and backer board are up and first coat of mud is on (backer board has been taped and joints sealed). Hopefully texturing after second coat this morning. I'll have this done (and a happy wife!) by the end of this week and then back to prepping for paint. Planning to have all my prep work done by Memorial weekend. Taking taking that Friday off to set up and then paint on Saturday. Reassembly to follow. Yeeha!

RexDodge · 05-06-2013, 08:47 AM

Second coat on the drywall and it looks good. Final sand with a little 20 minute mud touch ups and I will sling some texture tonight! I even snuck in a little shop time yesterday...mostly just organizing. Had to find the floor.

SeTx67 · 05-06-2013, 11:01 AM

Wow. Awesome work on a great looking truck
Posted via Mobile Device

RexDodge · 05-07-2013, 10:22 PM

Quote:

Originally Posted by SeTx67

Wow. Awesome work on a great looking truck
Posted via Mobile Device

Thanks! I couldn't have done it without all the great folks here on this site.

RexDodge · 05-07-2013, 10:24 PM

Quote:

Originally Posted by gdavis

Have you used the flow sealent yet? Did it work good for you? I will be needing to seal my cab roof soon and was looking for someone who has used that product. Where did you purchase it. Let me know Gdavis

I purchased the sealant from Rainbow finishes here in Oregun

. I have not used it yet but will in the next couple of weeks.

RexDodge · 05-07-2013, 10:27 PM

Quote:

Originally Posted by pontgta

Just awesome. I just followed the whole thread, and could not get enough

Why thank you very much! Tons o fun!!! Looking like we have it in paint in a few weeks!

chevy88 · 05-08-2013, 09:05 PM

Hope you get it painted for summer cruising after all your hard work
Posted via Mobile Device

RexDodge · 05-09-2013, 09:01 AM

Quote:

Originally Posted by chevy88

Hope you get it painted for summer cruising after all your hard work
Posted via Mobile Device

Memorial Day weekend...paint IS going on! Can't wait...
Posted via Mobile Device

RexDodge · 05-22-2013, 02:00 AM

Here we go! Prepping for paint this weekend. Now i need to figure out how to get it off that dang wall.

Posted via Mobile Device
Posted via Mobile Device
Posted via Mobile Device

JRE · 05-22-2013, 02:25 AM

lol I can bring my big floor jack over.Looks good. Also if you want I can come over before work on friday and paint the back side of Everything

RexDodge · 05-22-2013, 02:28 AM

Quote:

Originally Posted by JRE

lol I can bring my big floor jack over.Looks good. Also if you want I can come over before work on friday and paint the back side of Everything

That would be great. I am off Friday...well I plan to be off.

RexDodge · 05-24-2013, 10:43 PM

And so it begins...sneak preview!
Posted via Mobile Device

Bomp · 05-25-2013, 12:32 AM

Im stayin tooned.
Can't wait to get a chance to see it in person sometime.
Posted via Mobile Device

RexDodge · 05-25-2013, 09:35 AM

Quote:

Originally Posted by Bomp

Im stayin tooned.
Can't wait to get a chance to see it in person sometime.
Posted via Mobile Device

We should finish up painting late today. Rick got some new door hinges for me but I didn't get up there to pick them up yet. Re-assembly should be completed next weekend with a trip to the alignment shop the following week. So close now...this is driving me nuts!

RexDodge · 05-27-2013, 10:07 AM

Couple of almost all nighters... it's almost done!
Posted via Mobile Device
Posted via Mobile Device

Bomp · 05-27-2013, 10:25 AM

Nice job fellas,
I sure hope you bring it to one of the get togethers so we can see it live.

Hope you don't mind me flipping the pic for ya.

RexDodge · 05-27-2013, 10:52 AM

Thanks for the pic fix! Guaranteed I'll be at the gatherings...so excited to re-assemble.

RexDodge · 06-17-2013, 01:13 AM

It's slowly beginning to come back together...
Posted via Mobile Device
Posted via Mobile Device

chevy88 · 06-17-2013, 01:56 AM

Nice update, it's looking closer to hitting the road.

RexDodge · 06-25-2013, 08:33 AM

Almost there...got some trim painted and touched up the engine bay.

Low Elco · 06-26-2013, 08:13 AM

Maaan.... Lookin' good! It's a great feeling!

RexDodge · 06-27-2013, 08:46 AM

Quote:

Originally Posted by Low Elco

Maaan.... Lookin' good! It's a great feeling!

It really is. Sometimes I just sit and look at it

nuke1 · 06-27-2013, 09:48 AM

Looking really good!
Posted via Mobile Device

67ctener · 06-27-2013, 10:27 AM

Nice work! Good lookin German on the first page I have one myself
Posted via Mobile Device

jlsanborn · 06-27-2013, 12:51 PM

Whew! It only took me two hours at work but I made it to the end! Props to you man, that thing really looks killer!!! I'm the same way in the shop. Everything comes out, it's a damn mess and pretty soon I just have to stop and wind up the cords. It's a vicious circle. I get everything put a way and a clean shop motivates me to drag it all out again

Any other shots of your exhaust cut-outs in the x-member? You said you re-used the cut-out for reinforcement but I couldn't see where you put it?? I'm also anxious to hear what the alignment shop has to say as we've got pretty much the identical setup up front. I'll have to take a closer look at the spring pockets though. I didn't notice any rubby-dubby when I put mine back together.

You're really making me want to paint my truck!!!

05-05-2013, 09:57 AM	#176
RexDodge Registered User Join Date: Apr 2008 Location: Oregon City, Oregon Posts: 741	Re: my "71 C10 project Ok, I am still alive and kicking. In the home stretch of a couple of bathroom remodels. Meanwhile the LMC boxes are piling up . Drywall and backer board are up and first coat of mud is on (backer board has been taped and joints sealed). Hopefully texturing after second coat this morning. I'll have this done (and a happy wife!) by the end of this week and then back to prepping for paint. Planning to have all my prep work done by Memorial weekend. Taking taking that Friday off to set up and then paint on Saturday. Reassembly to follow. Yeeha!

05-06-2013, 08:47 AM	#177
RexDodge Registered User Join Date: Apr 2008 Location: Oregon City, Oregon Posts: 741	Re: my "71 C10 project Second coat on the drywall and it looks good. Final sand with a little 20 minute mud touch ups and I will sling some texture tonight! I even snuck in a little shop time yesterday...mostly just organizing. Had to find the floor. Attached Images

05-06-2013, 11:01 AM	#178
SeTx67 Registered User Join Date: May 2013 Location: Lumberton, TX Posts: 795	Re: my "71 C10 project Wow. Awesome work on a great looking truck Posted via Mobile Device

05-08-2013, 09:05 PM	#182
chevy88 Registered User Join Date: May 2007 Location: Southern, Saskatchewan Posts: 640	Re: my "71 C10 project Hope you get it painted for summer cruising after all your hard work Posted via Mobile Device __________________ Kerry My build thread. http://67-72chevytrucks.com/vboard/s....php?p=3657823 1971 Chev SWB with 68 nose, 6.2 diesel th350, and 3.73 rear gears 1988 Chev Extendacab 2010 Honda VT1300CS Sabre 2005 Buick Rendezvous wife's ride

05-22-2013, 02:00 AM	#184
RexDodge Registered User Join Date: Apr 2008 Location: Oregon City, Oregon Posts: 741	Re: my "71 C10 project Here we go! Prepping for paint this weekend. Now i need to figure out how to get it off that dang wall. Posted via Mobile Device Posted via Mobile Device Posted via Mobile Device Attached Images

05-22-2013, 02:25 AM	#185
JRE Registered User Join Date: Mar 2010 Location: Milwaukie Oregon Posts: 547	Re: my "71 C10 project lol I can bring my big floor jack over.Looks good. Also if you want I can come over before work on friday and paint the back side of Everything

05-24-2013, 10:43 PM	#187
RexDodge Registered User Join Date: Apr 2008 Location: Oregon City, Oregon Posts: 741	Re: my "71 C10 project And so it begins...sneak preview! Posted via Mobile Device Attached Images

05-25-2013, 12:32 AM	#188
Bomp Registered User Join Date: Apr 2011 Location: . Posts: 3,104	Re: my "71 C10 project Im stayin tooned. Can't wait to get a chance to see it in person sometime. Posted via Mobile Device

05-27-2013, 10:07 AM	#190
RexDodge Registered User Join Date: Apr 2008 Location: Oregon City, Oregon Posts: 741	Re: my "71 C10 project Couple of almost all nighters... it's almost done! Posted via Mobile Device Posted via Mobile Device Attached Images

05-27-2013, 10:25 AM	#191
Bomp Registered User Join Date: Apr 2011 Location: . Posts: 3,104	Re: my "71 C10 project Nice job fellas, I sure hope you bring it to one of the get togethers so we can see it live. Hope you don't mind me flipping the pic for ya.

05-27-2013, 10:52 AM	#192
RexDodge Registered User Join Date: Apr 2008 Location: Oregon City, Oregon Posts: 741	Re: my "71 C10 project Thanks for the pic fix! Guaranteed I'll be at the gatherings...so excited to re-assemble.

06-17-2013, 01:13 AM	#193
RexDodge Registered User Join Date: Apr 2008 Location: Oregon City, Oregon Posts: 741	Re: my "71 C10 project It's slowly beginning to come back together... Posted via Mobile Device Posted via Mobile Device Attached Images

06-17-2013, 01:56 AM	#194
chevy88 Registered User Join Date: May 2007 Location: Southern, Saskatchewan Posts: 640	Re: my "71 C10 project Nice update, it's looking closer to hitting the road. __________________ Kerry My build thread. http://67-72chevytrucks.com/vboard/s....php?p=3657823 1971 Chev SWB with 68 nose, 6.2 diesel th350, and 3.73 rear gears 1988 Chev Extendacab 2010 Honda VT1300CS Sabre 2005 Buick Rendezvous wife's ride

06-25-2013, 08:33 AM	#195
RexDodge Registered User Join Date: Apr 2008 Location: Oregon City, Oregon Posts: 741	Re: my "71 C10 project Almost there...got some trim painted and touched up the engine bay. Attached Images

06-26-2013, 08:13 AM	#196
Low Elco Registered User Join Date: Apr 2003 Location: Indep, MO Posts: 5,893	Re: my "71 C10 project Maaan.... Lookin' good! It's a great feeling! __________________ Boppa's Old Yeller Truck Build, Old Yeller's New Heart! Project Buzz Bomb Flyin' Low!



Register or Log In To remove these advertisements.

06-27-2013, 09:48 AM	#198
nuke1 Registered User Join Date: Jun 2007 Location: Saskatoon, Saskatchewan,: Posts: 2,901	Re: my "71 C10 project Looking really good! Posted via Mobile Device __________________ James 1968 GMC "HAVOC" 1986 GMC "Frank" J.J.R.H. Design & Consulting My 68`Rebuild "HAVOC": http://67-72chevytrucks.com/vboard/s...d.php?t=316300 A 58' chev build thread: http://www.67-72chevytrucks.com/vboa...d.php?t=311238 1969 Camaro Pro Touring http://67-72chevytrucks.com/vboard/s...61#post3513361 Swiss Cheese: http://67-72chevytrucks.com/vboard/s...d.php?t=384390 Adjustable Trailing Arm How-To: http://67-72chevytrucks.com/vboard/s...d.php?t=321100 1968 Ford Farm Truck: http://67-72chevytrucks.com/vboard/s...=1#post6555587

06-27-2013, 10:27 AM	#199
67ctener Registered User Join Date: Oct 2012 Location: Arlington Washington Posts: 1,808	Re: my "71 C10 project Nice work! Good lookin German on the first page I have one myself Posted via Mobile Device __________________ Scott 67 c10 sold 89 c1500 90 k2500 91 s10 #chevyonly

06-27-2013, 12:51 PM	#200
jlsanborn Registered User Join Date: Jun 2011 Location: Spokane, WA Posts: 2,372	Re: my "71 C10 project Whew! It only took me two hours at work but I made it to the end! Props to you man, that thing really looks killer!!! I'm the same way in the shop. Everything comes out, it's a damn mess and pretty soon I just have to stop and wind up the cords. It's a vicious circle. I get everything put a way and a clean shop motivates me to drag it all out again Any other shots of your exhaust cut-outs in the x-member? You said you re-used the cut-out for reinforcement but I couldn't see where you put it?? I'm also anxious to hear what the alignment shop has to say as we've got pretty much the identical setup up front. I'll have to take a closer look at the spring pockets though. I didn't notice any rubby-dubby when I put mine back together. You're really making me want to paint my truck!!! __________________ '77 K30 3+3 - "The Crummy" http://67-72chevytrucks.com/vboard/s...d.php?t=640134 '67 C10 L/SWB - Soon to be daily driver! http://67-72chevytrucks.com/vboard/s...d.php?t=471776

Register or Log In To remove these advertisements.