Short Changed - Page 8 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Zoomin · 02-26-2013, 10:48 AM

Quote:

Originally Posted by hydrojunkie

Your using a porterbuilt member right? I used federal mogul rubber mounts.
Posted via Mobile Device

I'm using Scott's Hot Rods cross member on this one.

Quote:

Originally Posted by LakeAnna

I love this build specially the chassis and LS1 install... Can't wait to see the progress as you move forward.

Thanks! I'll keep the updates coming for ya.
Posted via Mobile Device

Crash_OK · 03-22-2013, 03:45 PM

anything new on short changed Steve?

Zoomin · 03-22-2013, 03:50 PM

Waiting on Kyle.

Next step is welding some unused holes up, then painting it.

**screaminchevypickup** · 03-22-2013, 06:30 PM

Looks like I'm being checked up on!!
Posted via Mobile Device

Crash_OK · 03-22-2013, 06:43 PM

Quote:

Originally Posted by screaminchevypickup

Looks like I'm being checked up on!!
Posted via Mobile Device

garykirby25 · 03-22-2013, 07:14 PM

[QUOTE=screaminchevypickup;5964318]Looks like I'm being checked up on!!
[size=1]Posted via Mobile Device[/

The challenge wasn't to get a good guys quality truck done in a week, but to finish Zoomins real show stopper the following week!

I think Kyle could go on car warriors by himself and finish in 48 hours.

Posted via Mobile Device

Zoomin · 03-22-2013, 07:44 PM

Kyle could easily have finished up earlier if he didn't have to wait on parts that I ordered, or outside people like the muffler shop and bedliner.

Wish you all could have seen it. The guys around the shop had seen me load Tom up. I had told them I was just going to get the firewall painted - which was the plan at the time. They were astonished when I brought the truck back completed a week later.

[quote=garykirby25;5964393]

Quote:

Originally Posted by screaminchevypickup

Looks like I'm being checked up on!!
[size=1]Posted via Mobile Device[/

The challenge wasn't to get a good guys quality truck done in a week, but to finish Zoomins real show stopper the following week!

I think Kyle could go on car warriors by himself and finish in 48 hours.

Posted via Mobile Device

rambler · 03-22-2013, 07:59 PM

in .. somehow missed this

Zoomin · 03-26-2013, 11:49 PM

Well, the little distraction that was hurricane Tom is now in the rear view mirror, so to speak, so Short Changed is getting some love after sitting in the corner for the last few weeks.

Kyle had to flip the frame over to weld up the underneath of the c-notches.

Rare photo of grunge on the shop floor. Kyle is real meticulous about keeping his shop clean - one of the things I look for when evaluating who I let work on my stuff.
Kinda funny because I can't keep my own shop like that to save my neck. Do as I say, not as I do.

Flipped it back over to start getting things positioned for final fitment before paint. Front suspension goes back on...

The rear end got the 4 bar brackets welded on fully instead of just being tacked on.

Engine and transmission are dropped into place.

Ordered the brake lines, fittings, and headers and they hopefully will be here by Friday. The object is to get all the holes drilled and crossmembers set prior to paint.

67c10rustbuket · 03-26-2013, 11:52 PM

Beautiful! great work guys. The suspension on this makes me drooool!

Crash_OK · 03-27-2013, 06:09 AM

Looks Great Steve.. That LS looks really nice sitting there. Are you guys going to use a after-market harness?

shawno72 · 03-27-2013, 08:10 AM

Ok so a newb question about the coil over, it stays at the low ride height correct?

Work looks awesome by the way

garykirby25 · 03-27-2013, 08:40 AM

What size rotors are those?
Posted via Mobile Device

**screaminchevypickup** · 03-27-2013, 08:57 AM

Quote:

Originally Posted by Crash_OK

Looks Great Steve.. That LS looks really nice sitting there. Are you guys going to use a after-market harness?

Yep!! All new only way to go..

Quote:

Originally Posted by shawno72

Ok so a newb question about the coil over, it stays at the low ride height correct?

Work looks awesome by the way

Its at its lowest point but can be raised up..

Quote:

Originally Posted by garykirby25

What size rotors are those?
Posted via Mobile Device

Big

13"

Crash_OK · 03-27-2013, 09:13 AM

Quote:

Originally Posted by screaminchevypickup

Yep!! All new only way to go..

Thanks Kyle,

Not sure I agree it is the only way to go for all builds.. But for this one I can definitely understand why you went with it; it is so much cleaner and better looking than the stock harness.. Only the best for this build.

Looking forward to more progress.. have a great day..

Rusbuilt · 03-27-2013, 09:50 AM

Looking good fellas!

Bennett68C10 · 03-27-2013, 10:05 AM

Looks great, you guys work fast

AJohn6 · 03-28-2013, 05:16 PM

Oh she is coming along quite nicely. Keep up the great work.

Zoomin · 03-30-2013, 11:07 PM

Mark, I hear ya on the wiring harness deal. I think it's really cool how you rolled your own, and I would if I had your ability and the time.

I got a few more deliveries this week. The spouse is definitely tuned into this, what with all the stuff showing up for Tom recently. She doesn't get mad, she gets even. They are weird that way I guess, but this build is gonna cost me.

After researching the LS forum for several hours, I discovered that Doug Thorley headers were highly recommended, and I can see why. They are nicely finished with ceramic coating inside and out, and they are designed for these trucks - they fit perfectly with no notching, and there's plenty of room to get to the starter and not worry about heat soak. They are also completely above the bottom of the frame rail, so no scraping issues with these rascals.

Started to test fit the rack and pinion steering setup today. It's tucked up there nice for plenty of clearance. It's going to be interesting to see how the steering makes it way around the headers and the engine mounts.

Crash_OK · 03-31-2013, 12:46 AM

Steve,

Those headers look great and the clearance is really good on them. They look like that would have worked on my K10 with the Pacific fabrication cross member. I considered them on the K10, but was afraid they would not fit. What is the LS out of? I might be interested in the stock manifolds.

Zoomin · 03-31-2013, 09:43 AM

99 Camaro.
Posted via Mobile Device

shawno72 · 03-31-2013, 09:51 AM

Those headers look nice and looks like you have a mile of clearance. And don't worry about the steering, just go wireless

Zoomin · 03-31-2013, 10:38 AM

Quote:

Originally Posted by shawno72

Those headers look nice and looks like you have a mile of clearance. And don't worry about the steering, just go wireless

Hmmm. You may have something there....

**Hart_Rod** · 03-31-2013, 10:44 AM

Looks great! The Thorley are hard to beat,

!

Rusbuilt · 03-31-2013, 10:49 AM

Nice!

03-22-2013, 03:45 PM	#177
Crash_OK Registered User Join Date: Nov 2011 Location: Edmond, OK. Posts: 1,362	Re: Short Changed anything new on short changed Steve? __________________ Mark ----------------------- Crash's 69 4x4 SWB Crash's Roof over Lake Home Crash's 1988 Land Cruiser Build

03-22-2013, 03:50 PM	#178
Zoomin Man of Mini-Talents Join Date: Sep 2009 Location: Oklahoma City, OK Posts: 4,295	Re: Short Changed Waiting on Kyle. Next step is welding some unused holes up, then painting it. __________________ Steve Project - Ruth 66 Skylark Project - Lola 60 Biscayne Project - Iron Ox 54 GMC 100 Project - Darth 69 Camaro

03-22-2013, 06:30 PM	#179
screaminchevypickup Laid Back Join Date: Apr 2010 Location: mcloud ok Posts: 2,658	Re: Short Changed Looks like I'm being checked up on!! Posted via Mobile Device __________________ 72 chevy swb Direct dealers for.. Vintage Air, Porterbuilt, Billet Specialties,Budnik wheels ,eddie motorsports, raceline wheels, intro wheels, Dakota Digital, precision, unisteer, Trimparts, and many many more... Laid Back Recreations.. Full restoration shop and full paint and body.. Kyle http://67-72chevytrucks.com/vboard/s...d.php?t=574629

03-22-2013, 07:14 PM	#181
garykirby25 Registered User Join Date: Feb 2009 Location: graham,tx Posts: 344	Re: Short Changed [QUOTE=screaminchevypickup;5964318]Looks like I'm being checked up on!! [size=1]Posted via Mobile Device[/ The challenge wasn't to get a good guys quality truck done in a week, but to finish Zoomins real show stopper the following week! I think Kyle could go on car warriors by himself and finish in 48 hours. Posted via Mobile Device __________________ My 1970 C10 Build "Project Teacher"

03-22-2013, 07:59 PM	#183
rambler MOVE OVER Join Date: Jun 2002 Location: Warrensburg, MO Posts: 5,470	Re: Short Changed in .. somehow missed this __________________ No matter where you are..... There you are... Buckaroo Banzi

03-26-2013, 11:49 PM	#184
Zoomin Man of Mini-Talents Join Date: Sep 2009 Location: Oklahoma City, OK Posts: 4,295	Re: Short Changed Well, the little distraction that was hurricane Tom is now in the rear view mirror, so to speak, so Short Changed is getting some love after sitting in the corner for the last few weeks. Kyle had to flip the frame over to weld up the underneath of the c-notches. Rare photo of grunge on the shop floor. Kyle is real meticulous about keeping his shop clean - one of the things I look for when evaluating who I let work on my stuff. Kinda funny because I can't keep my own shop like that to save my neck. Do as I say, not as I do. Flipped it back over to start getting things positioned for final fitment before paint. Front suspension goes back on... The rear end got the 4 bar brackets welded on fully instead of just being tacked on. Engine and transmission are dropped into place. Ordered the brake lines, fittings, and headers and they hopefully will be here by Friday. The object is to get all the holes drilled and crossmembers set prior to paint. __________________ Steve Project - Ruth 66 Skylark Project - Lola 60 Biscayne Project - Iron Ox 54 GMC 100 Project - Darth 69 Camaro

03-26-2013, 11:52 PM	#185
67c10rustbuket Registered User Join Date: Apr 2011 Location: Mustang, Oklahoma Posts: 2,806	Re: Short Changed Beautiful! great work guys. The suspension on this makes me drooool! __________________ Dan <---(my name) 67 SWB C10 project "GEORGIA"-59 Brookwood 2dr wag...Next project-03 Tahoe 4x4 5.3 family ride-07 Hondur Accord, commuter car

03-27-2013, 06:09 AM	#186
Crash_OK Registered User Join Date: Nov 2011 Location: Edmond, OK. Posts: 1,362	Re: Short Changed Looks Great Steve.. That LS looks really nice sitting there. Are you guys going to use a after-market harness? __________________ Mark ----------------------- Crash's 69 4x4 SWB Crash's Roof over Lake Home Crash's 1988 Land Cruiser Build

03-27-2013, 08:10 AM	#187
shawno72 C/10 junkie Join Date: Nov 2010 Location: Stockton Ca Posts: 9,094	Re: Short Changed Ok so a newb question about the coil over, it stays at the low ride height correct? Work looks awesome by the way __________________ Shawn 70 LWB C10 current driver/project http://67-72chevytrucks.com/vboard/s...d.php?t=663051 68 SWB C10 Work in progress.....SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=559520 72 LWB C10 Sold 71 LWB C10 Sold 68 LWB C10 CST Sold http://youtu.be/kbB0QrBIs9k My mom always had the best advice. It was just a tad late. After a fall that involved blood, she'd say....."Careful!"

03-27-2013, 08:40 AM	#188
garykirby25 Registered User Join Date: Feb 2009 Location: graham,tx Posts: 344	Re: Short Changed What size rotors are those? Posted via Mobile Device __________________ My 1970 C10 Build "Project Teacher"

03-27-2013, 09:50 AM	#191
Rusbuilt Registered User Join Date: Mar 2012 Location: Knoxville, TN Posts: 5,381	Re: Short Changed Looking good fellas! __________________ -Rus PLEASE HELP WITH PROJECT UNDERHAULINPaypal donations accepted @ rus1785@yahoo.com Rusbuilt's garage 1968 Chevy C-30 Darcy SOLD Rusbuilt shop truck *SOLD*

03-27-2013, 10:05 AM	#192
Bennett68C10 Registered User Join Date: Dec 2006 Location: Toms River, NJ Posts: 5,518	Re: Short Changed Looks great, you guys work fast __________________ Keith 66 Suburban Burb Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=751361 IG: bennett68c10

03-28-2013, 05:16 PM	#193
AJohn6 Knuckle head Join Date: Mar 2008 Location: NC Posts: 283	Re: Short Changed Oh she is coming along quite nicely. Keep up the great work. __________________ Adam '71 SWB/Step http://67-72chevytrucks.com/vboard/s...d.php?t=291750 2017 Crew Cab Silverado LTZ with 6.2l, 8 Speed tuned by RPM in Garner, NC '00 Chevy 1500 6.0l Silverado Reg. Cab Short Bed '09 Chevy 1500 5.3l Silverado Crew Cab Short Bed (SOLD) 1971 LWB on 2014 1 ton chassis, L96 6.0LS / 6L90E http://67-72chevytrucks.com/vboard/s...d.php?t=796785 1969 LWB C10- Future project, possible AWD C10 on a 2002 Escalade Chassis.

03-30-2013, 11:07 PM	#194
Zoomin Man of Mini-Talents Join Date: Sep 2009 Location: Oklahoma City, OK Posts: 4,295	Re: Short Changed Mark, I hear ya on the wiring harness deal. I think it's really cool how you rolled your own, and I would if I had your ability and the time. I got a few more deliveries this week. The spouse is definitely tuned into this, what with all the stuff showing up for Tom recently. She doesn't get mad, she gets even. They are weird that way I guess, but this build is gonna cost me. After researching the LS forum for several hours, I discovered that Doug Thorley headers were highly recommended, and I can see why. They are nicely finished with ceramic coating inside and out, and they are designed for these trucks - they fit perfectly with no notching, and there's plenty of room to get to the starter and not worry about heat soak. They are also completely above the bottom of the frame rail, so no scraping issues with these rascals. Started to test fit the rack and pinion steering setup today. It's tucked up there nice for plenty of clearance. It's going to be interesting to see how the steering makes it way around the headers and the engine mounts. __________________ Steve Project - Ruth 66 Skylark Project - Lola 60 Biscayne Project - Iron Ox 54 GMC 100 Project - Darth 69 Camaro

03-31-2013, 12:46 AM	#195
Crash_OK Registered User Join Date: Nov 2011 Location: Edmond, OK. Posts: 1,362	Re: Short Changed Steve, Those headers look great and the clearance is really good on them. They look like that would have worked on my K10 with the Pacific fabrication cross member. I considered them on the K10, but was afraid they would not fit. What is the LS out of? I might be interested in the stock manifolds. __________________ Mark ----------------------- Crash's 69 4x4 SWB Crash's Roof over Lake Home Crash's 1988 Land Cruiser Build



Register or Log In To remove these advertisements.

03-31-2013, 09:43 AM	#196
Zoomin Man of Mini-Talents Join Date: Sep 2009 Location: Oklahoma City, OK Posts: 4,295	Re: Short Changed 99 Camaro. Posted via Mobile Device __________________ Steve Project - Ruth 66 Skylark Project - Lola 60 Biscayne Project - Iron Ox 54 GMC 100 Project - Darth 69 Camaro

03-31-2013, 09:51 AM	#197
shawno72 C/10 junkie Join Date: Nov 2010 Location: Stockton Ca Posts: 9,094	Re: Short Changed Those headers look nice and looks like you have a mile of clearance. And don't worry about the steering, just go wireless __________________ Shawn 70 LWB C10 current driver/project http://67-72chevytrucks.com/vboard/s...d.php?t=663051 68 SWB C10 Work in progress.....SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=559520 72 LWB C10 Sold 71 LWB C10 Sold 68 LWB C10 CST Sold http://youtu.be/kbB0QrBIs9k My mom always had the best advice. It was just a tad late. After a fall that involved blood, she'd say....."Careful!"

03-31-2013, 10:44 AM	#199
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,865	Re: Short Changed Looks great! The Thorley are hard to beat, ! __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3

03-31-2013, 10:49 AM	#200
Rusbuilt Registered User Join Date: Mar 2012 Location: Knoxville, TN Posts: 5,381	Re: Short Changed Nice! __________________ -Rus PLEASE HELP WITH PROJECT UNDERHAULINPaypal donations accepted @ rus1785@yahoo.com Rusbuilt's garage 1968 Chevy C-30 Darcy SOLD Rusbuilt shop truck *SOLD*

Register or Log In To remove these advertisements.