Project "Tiffany" - Page 8 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**lolife99** · 03-10-2013, 01:58 PM

Quote:

Originally Posted by BigCountryx

LMAO at "quick truck". This thing already has the makings of a mag shoot.

I agree!
Watch this truck be NICER than Hazel,... if that's possible.

fastcam1 · 03-10-2013, 02:08 PM

Quote:

Originally Posted by lolife99

I agree!
Watch this truck be NICER than Hazel,... if that's possible.

He will find a way to one up her, just when you think you've seen all his ideas he comes up with another original idea while the rest of us drool

Posted via Mobile Device

n2billet · 03-10-2013, 02:19 PM

Quote:

Originally Posted by BucksSS

E-brake?

Just like Hazel, let all the air out and it lays on the ground.....holds truck in place very nicely

Quote:

Originally Posted by BigCountryx

"I had originally planned on selling one of these and building the other but after looking around the shop and my storage I discovered I had a bunch of parts that could be used to built a quick truck for this summer shows"

LMAO at "quick truck". This thing already has the makings of a mag shoot.
Posted via Mobile Device

Using my own words against me!!

Quote:

Originally Posted by lolife99

I agree!
Watch this truck be NICER than Hazel,... if that's possible.

In some respects but Hazel took on a life of her own...I think Tiffany will always be in her shadows.

Quote:

Originally Posted by fastcam1

He will find a way to one up her, just when you think you've seen all his ideas he comes up with another original idea while the rest of us drool

Posted via Mobile Device

We'll see

C10_ustacould · 03-10-2013, 02:30 PM

Quote:

Originally Posted by n2billet

Just like Hazel, let all the air out and it lays on the ground.....holds truck in place very nicely

That's awesome!

Rusbuilt · 03-10-2013, 02:53 PM

Looking good sir!

1lo67 · 03-10-2013, 09:46 PM

Sweet build.
Do you have the Part Numbers on the Brake setup Rotors/Calipers ect.. What Spindle set up are you running?

n2billet · 03-11-2013, 05:59 AM

Quote:

Originally Posted by 1lo67

Sweet build.
Do you have the Part Numbers on the Brake setup Rotors/Calipers ect.. What Spindle set up are you running?

I'm using the CPP Module spindle: CP30106-4

Brake Performance Rotors, Dimpled & Slotted, Black Zinc Coated Front: RB 66000

Rear, same as above but for a 94 Astro AWD : RB 66022

Cabtain Fab rear disc Brackets: http://67-72chevytrucks.com/vboard/s...d.php?t=398352

Chvy2NV · 03-11-2013, 08:42 AM

Hey Keith I know you mentioned your running the rear D52 Wilwoods. How about the fronts??

Thanks for the break down with part #s.

Quote:

Originally Posted by n2billet

I'm using the CPP Module spindle: CP30106-4

Brake Performance Rotors, Dimpled & Slotted, Black Zinc Coated Front: RB 66000

Rear, same as above but for a 94 Astro AWD : RB 66022

Cabtain Fab rear disc Brackets: http://67-72chevytrucks.com/vboard/s...d.php?t=398352

Posted via Mobile Device

shawno72 · 03-11-2013, 09:06 AM

Looking so good!!

1lo67 · 03-11-2013, 09:15 AM

Quote:

Originally Posted by n2billet

I'm using the CPP Module spindle: CP30106-4

Brake Performance Rotors, Dimpled & Slotted, Black Zinc Coated Front: RB 66000

Rear, same as above but for a 94 Astro AWD : RB 66022

Cabtain Fab rear disc Brackets: http://67-72chevytrucks.com/vboard/s...d.php?t=398352

Thanks that's great info..... Sure that will save me and others money and time.
Posted via Mobile Device

n2billet · 03-11-2013, 10:00 AM

Quote:

Originally Posted by Chvy2NV

Hey Keith I know you mentioned your running the rear D52 Wilwoods. How about the fronts??

Thanks for the break down with part #s.

Posted via Mobile Device

I'm running D52's on the front as well......same as Hazel but with upgraded rotors.

Low Elco · 03-11-2013, 10:25 AM

Quote:

Originally Posted by n2billet

In some respects but Hazel took on a life of her own...I think Tiffany will always be in her shadows.

Nobody puts Baby (Tiffy) in the corner.

Chvy2NV · 03-12-2013, 09:27 PM

What are the RB 66000 from? Also what's the difference between the dimpled vs the drilled rotors ?
Posted via Mobile Device

darkhorse970 · 03-12-2013, 09:48 PM

Quote:

Originally Posted by n2billet

In some respects but Hazel took on a life of her own...I think Tiffany will always be in her shadows.

So I have to ask, of the trucks you've built which is your favorite? And why?
Posted via Mobile Device

**Bowtie468** · 03-12-2013, 09:52 PM

Whew ! Glad I caught this one early !!!! Rolling along nicely , Keith !!

Posted via Mobile Device

n2billet · 03-12-2013, 10:13 PM

Quote:

Originally Posted by Chvy2NV

What are the RB 66000 from? Also what's the difference between the dimpled vs the drilled rotors ?
Posted via Mobile Device

They are for a 73-87 truck 1 1/4 rotor...The dimpled is suppose to be stronger than the drilled and not prone to cracking but still cool the rotor.

Quote:

Originally Posted by darkhorse970

So I have to ask, of the trucks you've built which is your favorite? And why?
Posted via Mobile Device

Up to this point it's been Hazel....I loved the ride quality and I didn't have to worry about the paint!

Quote:

Originally Posted by Bowtie468

Whew ! Glad I caught this one early !!!! Rolling along nicely , Keith !!

Posted via Mobile Device

I've been watching your build closely....the motor looks awesome......you going to have it at CTC this year?
Posted via Mobile Device

**Bowtie468** · 03-12-2013, 11:04 PM

Quote:

Originally Posted by n2billet

I've been watching your build closely....the motor looks awesome......you going to have it at CTC this year?
Posted via Mobile Device

Oh yeah , she'll be there !
Posted via Mobile Device

68fixeruper · 03-13-2013, 06:39 AM

Awesome work as always keep it going.
Posted via Mobile Device

aggie91 · 03-13-2013, 08:34 AM

Great progress. I was away for a few days, I was a page and a half behind on this one.

Looks good as always!

fastcam1 · 03-13-2013, 04:37 PM

Quote:

Originally Posted by n2billet

Up to this point it's been Hazel....I loved the ride quality and I didn't have to worry about the paint!

So my wife always asks me why people finish projects, sell them, and start another especially when the next project is the same vehicle. I tell her for some people the build is more exciting for them or they wish they had done some stuff different, but what has me curious is since Hazel has been your favorite what made you sell her instead of keeping her for yourself?
Posted via Mobile Device

n2billet · 03-13-2013, 04:48 PM

Quote:

Originally Posted by fastcam1

So my wife always asks me why people finish projects, sell them, and start another especially when the next project is the same vehicle. I tell her for some people the build is more exciting for them or they wish they had done some stuff different, but what has me curious is since Hazel has been your favorite what made you sell her instead of keeping her for yourself?
Posted via Mobile Device

Well, it made the cover of Street Trucks and was named truck of the year so I knew this was my window of opportunity to get the most money for it. I originally didn't have any plans to sell but I enjoy the build process and I try to built a little better product each time so the sale allowed me to start working on this truck and collecting parts for my other 68 I have. It also might help with a future business I may be starting.
Posted via Mobile Device

ddubbs · 03-13-2013, 05:00 PM

Another top notch build. Can't wait to see the finished project.
Posted via Mobile Device

**Nobby** · 03-13-2013, 06:04 PM

Tiff's looking good man !!! Are you gonna try to make it to Pate Swap Meet? If so you need to look us up, well maybe ''hear us up''cause we are probably the loudest group out there

hinkle · 03-13-2013, 07:23 PM

Nice professional work.

1lo67 · 03-13-2013, 07:49 PM

I see you use a Wilwood master with no booster on your builds, how is the pedal feel compared to running a Booster? i love the way it cleans up the firewall and i want to go that route... i'm sure you have answered this question before and i just missed it.

03-10-2013, 02:53 PM	#180
Rusbuilt Registered User Join Date: Mar 2012 Location: Knoxville, TN Posts: 5,381	Re: Project "Tiffany" Looking good sir! __________________ -Rus PLEASE HELP WITH PROJECT UNDERHAULINPaypal donations accepted @ rus1785@yahoo.com Rusbuilt's garage 1968 Chevy C-30 Darcy SOLD Rusbuilt shop truck *SOLD*

03-10-2013, 09:46 PM	#181
1lo67 Registered User Join Date: May 2005 Location: Morristown, Tn Posts: 275	Re: Project "Tiffany" Sweet build. Do you have the Part Numbers on the Brake setup Rotors/Calipers ect.. What Spindle set up are you running?

03-11-2013, 09:06 AM	#184
shawno72 C/10 junkie Join Date: Nov 2010 Location: Stockton Ca Posts: 9,093	Re: Project "Tiffany" Looking so good!! __________________ Shawn 70 LWB C10 current driver/project http://67-72chevytrucks.com/vboard/s...d.php?t=663051 68 SWB C10 Work in progress.....SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=559520 72 LWB C10 Sold 71 LWB C10 Sold 68 LWB C10 CST Sold http://youtu.be/kbB0QrBIs9k My mom always had the best advice. It was just a tad late. After a fall that involved blood, she'd say....."Careful!"

03-12-2013, 09:27 PM	#188
Chvy2NV Registered User Join Date: Apr 2012 Location: So. Florida Posts: 873	Re: Project "Tiffany" What are the RB 66000 from? Also what's the difference between the dimpled vs the drilled rotors ? Posted via Mobile Device

03-12-2013, 09:52 PM	#190
Bowtie468 Senior Member Join Date: Jun 2002 Location: Cecilia, Louisiana Posts: 1,638	Re: Project "Tiffany" Whew ! Glad I caught this one early !!!! Rolling along nicely , Keith !! Posted via Mobile Device __________________ Chris click here to see my buildpage http://67-72chevytrucks.com/vboard/s...d.php?t=394656 ---------------------------------- 1979 C10 Silverado Big10 SWB Factory 454/400 Cardinal Red/Santa Fe Tan (original paint) 1969 Camaro X44 LS swap 1968 C10 SWB Fleetside (SOLD) 468BBC MultiPort TPI / Dynamic EFI P4 Black/Black 1963 Nova SS convertible (SOLD) 194 I6/ PowerGlide

03-13-2013, 06:39 AM	#193
68fixeruper Registered User Join Date: Apr 2006 Location: Amarillo, Tx Posts: 267	Re: Project "Tiffany" Awesome work as always keep it going. Posted via Mobile Device

03-13-2013, 08:34 AM	#194
aggie91 I'm just glad to be here! Join Date: Jan 2008 Location: Longview, TX Posts: 4,788	Re: Project "Tiffany" Great progress. I was away for a few days, I was a page and a half behind on this one. Looks good as always! __________________ Karl 1965 Chevy Stepside(Grandpa's Old Blue) and (July 2015 Shop Build!)(2020, the Saga Continues) http://67-72chevytrucks.com/vboard/s...d.php?t=372424 The LST Challenge: http://67-72chevytrucks.com/vboard/s...=1#post7812257 Korbin's 1st Square: "Sunburn" http://67-72chevytrucks.com/vboard/s...d.php?t=418618 1985 GMC Sierra: "White Trash", Korbin's 2nd now... http://67-72chevytrucks.com/vboard/s...d.php?t=632305 Henry - 1984 Chevrolet, Owen's 1st Square

03-13-2013, 05:00 PM	#197
ddubbs Registered User Join Date: Feb 2011 Location: Alaska Posts: 461	Re: Project "Tiffany" Another top notch build. Can't wait to see the finished project. Posted via Mobile Device __________________ LIFTED OR LOW THE ONLY WAY TO GO!!!! Check out my build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=517346 Projects 56 Chevy pickup Porterbuilt FR/RR dropmembers

03-13-2013, 06:04 PM	#198
Nobby Senior Member Join Date: Feb 2005 Location: St. Amant Louisiana Posts: 840	Re: Project "Tiffany" Tiff's looking good man !!! Are you gonna try to make it to Pate Swap Meet? If so you need to look us up, well maybe ''hear us up''cause we are probably the loudest group out there

03-13-2013, 07:23 PM	#199
hinkle Registered User Join Date: Apr 2012 Location: Las Vegas, Nevada Posts: 14	Re: Project "Tiffany" Nice professional work.

03-13-2013, 07:49 PM	#200
1lo67 Registered User Join Date: May 2005 Location: Morristown, Tn Posts: 275	Re: Project "Tiffany" I see you use a Wilwood master with no booster on your builds, how is the pedal feel compared to running a Booster? i love the way it cleans up the firewall and i want to go that route... i'm sure you have answered this question before and i just missed it.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.