2wd swap - Page 8 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

SCOTI · 05-19-2022, 11:03 PM

I like it.

KQQL IT · 05-20-2022, 01:44 PM

The gov lock did its normal thing.
This is the 2nd time the 12 bolt gave up.
Couldn't believe the amount of hate the 9in replacement got.
Didn't know the gm fan boys where that way.

SCOTI · 05-20-2022, 02:33 PM

Quote:

Originally Posted by KQQL IT

The gov lock did its normal thing.
This is the 2nd time the 12 bolt gave up.
Couldn't believe the amount of hate the 9in replacement got.
Didn't know the gm fan boys where that way.

Well..... The GOV lock set-ups are known weak links so there's that. I'm fine w/the 9" or 8.8 options.

KQQL IT · 05-20-2022, 05:06 PM

He knew the issues with the gov bomb.
Also don't suppose the donuts spun had anything to do with it.
Lol

SCOTI · 05-20-2022, 05:24 PM

Quote:

Originally Posted by KQQL IT

He knew the issues with the gov bomb.
Also don't suppose the donuts spun had anything to do with it.
Lol

No way...

KQQL IT · 05-25-2022, 01:30 PM

Kid surprises me again.

Cal trac housing bracket won't cooperate with the dual shock brackets.
Because pre runner stuff.

So he downloaded fusion 360 Tuesday. Sends me this Wednesday

SCOTI · 05-25-2022, 03:30 PM

Man.... How cool would it have been to have tools like this that one-time I was a young-gun?

KQQL IT · 05-25-2022, 11:34 PM

Quote:

Originally Posted by SCOTI

Man.... How cool would it have been to have tools like this that one-time I was a young-gun?

Would have saved hundreds of cut off wheels

SCOTI · 05-26-2022, 07:44 AM

Quote:

Originally Posted by KQQL IT

Would have saved hundreds of cut off wheels

I'm sure we saved them..... In our lungs

KQQL IT · 05-26-2022, 07:48 AM

Quote:

Originally Posted by SCOTI

I'm sure we saved them..... In our lungs

I was thinking about my ears, but yeah that too.

KQQL IT · 06-12-2022, 11:58 PM

After a complete failure with the local guy, sendcutsend.com blew us away.
Kid left a .010 tolerance and it fit together so well that it needed a love tap to take apart for the final fit up

KQQL IT · 06-18-2022, 11:23 PM

Brother's on vacation.

Back on the K5 my son's got the fusion360 working pretty well I think.
Since we sectioned the crossmember 1.5 inches then raised the upper pivot the same trying negate some bumpsteer and got only a 2° camber change thru the usable travel.
He drew us up a new upper pivot that's 1.75 taller than stock
and created an access hole for the airbag fittings.

May also ad in a coil over mount into it.

KQQL IT · 06-21-2022, 10:36 PM

Final render

KQQL IT · 06-25-2022, 06:50 PM

1st mock up

KQQL IT · 06-29-2022, 08:10 PM

New parts came.

KQQL IT · 07-03-2022, 08:24 PM

Welding it out.

KQQL IT · 07-09-2022, 12:29 PM

Sperical washer.
Sure why not.

SCOTI · 07-09-2022, 07:17 PM

What's the purpose (need?) for the spherical washers?

KQQL IT · 07-09-2022, 08:29 PM

Quote:

Originally Posted by SCOTI

What's the purpose (need?) for the spherical washers?

The choppin block arms have a tight(er) tolerance on the stud.
And with any caster in the shim stack it bends the stud overvwhen flange nut is tight.
And looks better than the factory stuff.

SCOTI · 07-09-2022, 09:51 PM

Makes sense. Where did you source them for reference?

KQQL IT · 07-09-2022, 10:01 PM

Jungle site.

Morton - SP-2 Low Carbon Steel Spherical Washer Sets, Equalizing Washers, Inch Size, 1/2" Bolt Size https://a.co/d/fsst9WR

KQQL IT · 07-10-2022, 12:44 PM

Brother's 9 inch back from powder.
Hopefully get it under it today.

KQQL IT · 07-11-2022, 01:45 AM

Got hosed, axles are wrong.
Bar brackets came out neat

KQQL IT · 07-18-2022, 03:00 PM

.250 spacer
And the calipers clear

KQQL IT · 07-25-2022, 10:41 PM

Success

05-19-2022, 11:03 PM	#176
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 22,068	Re: 2wd swap I like it. __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

05-20-2022, 01:44 PM	#177
KQQL IT At the body shop. Join Date: Aug 2009 Location: Land of fruits and nuts. Posts: 5,259	Re: 2wd swap The gov lock did its normal thing. This is the 2nd time the 12 bolt gave up. Couldn't believe the amount of hate the 9in replacement got. Didn't know the gm fan boys where that way. Attached Images __________________ " That didnt make it any newer " " Dont antique the equipment "

05-20-2022, 05:06 PM	#179
KQQL IT At the body shop. Join Date: Aug 2009 Location: Land of fruits and nuts. Posts: 5,259	Re: 2wd swap He knew the issues with the gov bomb. Also don't suppose the donuts spun had anything to do with it. Lol __________________ " That didnt make it any newer " " Dont antique the equipment "

05-25-2022, 01:30 PM	#181
KQQL IT At the body shop. Join Date: Aug 2009 Location: Land of fruits and nuts. Posts: 5,259	Re: 2wd swap Kid surprises me again. Cal trac housing bracket won't cooperate with the dual shock brackets. Because pre runner stuff. So he downloaded fusion 360 Tuesday. Sends me this Wednesday Attached Images __________________ " That didnt make it any newer " " Dont antique the equipment "

05-25-2022, 03:30 PM	#182
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 22,068	Re: 2wd swap Man.... How cool would it have been to have tools like this that one-time I was a young-gun? __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

06-12-2022, 11:58 PM	#186
KQQL IT At the body shop. Join Date: Aug 2009 Location: Land of fruits and nuts. Posts: 5,259	Re: 2wd swap After a complete failure with the local guy, sendcutsend.com blew us away. Kid left a .010 tolerance and it fit together so well that it needed a love tap to take apart for the final fit up Attached Images __________________ " That didnt make it any newer " " Dont antique the equipment " Last edited by KQQL IT; 06-13-2022 at 01:15 AM.

06-18-2022, 11:23 PM	#187
KQQL IT At the body shop. Join Date: Aug 2009 Location: Land of fruits and nuts. Posts: 5,259	Re: 2wd swap Brother's on vacation. Back on the K5 my son's got the fusion360 working pretty well I think. Since we sectioned the crossmember 1.5 inches then raised the upper pivot the same trying negate some bumpsteer and got only a 2° camber change thru the usable travel. He drew us up a new upper pivot that's 1.75 taller than stock and created an access hole for the airbag fittings. May also ad in a coil over mount into it. Attached Images __________________ " That didnt make it any newer " " Dont antique the equipment " Last edited by KQQL IT; 06-20-2022 at 10:38 PM.

06-21-2022, 10:36 PM	#188
KQQL IT At the body shop. Join Date: Aug 2009 Location: Land of fruits and nuts. Posts: 5,259	Re: 2wd swap Final render Attached Images __________________ " That didnt make it any newer " " Dont antique the equipment "

06-25-2022, 06:50 PM	#189
KQQL IT At the body shop. Join Date: Aug 2009 Location: Land of fruits and nuts. Posts: 5,259	Re: 2wd swap 1st mock up Attached Images __________________ " That didnt make it any newer " " Dont antique the equipment "

06-29-2022, 08:10 PM	#190
KQQL IT At the body shop. Join Date: Aug 2009 Location: Land of fruits and nuts. Posts: 5,259	Re: 2wd swap New parts came. Attached Images __________________ " That didnt make it any newer " " Dont antique the equipment "

07-03-2022, 08:24 PM	#191
KQQL IT At the body shop. Join Date: Aug 2009 Location: Land of fruits and nuts. Posts: 5,259	Re: 2wd swap Welding it out. Attached Images __________________ " That didnt make it any newer " " Dont antique the equipment "

07-09-2022, 12:29 PM	#192
KQQL IT At the body shop. Join Date: Aug 2009 Location: Land of fruits and nuts. Posts: 5,259	Re: 2wd swap Sperical washer. Sure why not. Attached Images __________________ " That didnt make it any newer " " Dont antique the equipment "

07-09-2022, 07:17 PM	#193
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 22,068	Re: 2wd swap What's the purpose (need?) for the spherical washers? __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

07-09-2022, 09:51 PM	#195
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 22,068	Re: 2wd swap Makes sense. Where did you source them for reference? __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

07-09-2022, 10:01 PM	#196
KQQL IT At the body shop. Join Date: Aug 2009 Location: Land of fruits and nuts. Posts: 5,259	Re: 2wd swap Jungle site. Morton - SP-2 Low Carbon Steel Spherical Washer Sets, Equalizing Washers, Inch Size, 1/2" Bolt Size https://a.co/d/fsst9WR __________________ " That didnt make it any newer " " Dont antique the equipment "



Register or Log In To remove these advertisements.

07-10-2022, 12:44 PM	#197
KQQL IT At the body shop. Join Date: Aug 2009 Location: Land of fruits and nuts. Posts: 5,259	Re: 2wd swap Brother's 9 inch back from powder. Hopefully get it under it today. Attached Images __________________ " That didnt make it any newer " " Dont antique the equipment "

07-11-2022, 01:45 AM	#198
KQQL IT At the body shop. Join Date: Aug 2009 Location: Land of fruits and nuts. Posts: 5,259	Re: 2wd swap Got hosed, axles are wrong. Bar brackets came out neat Attached Images __________________ " That didnt make it any newer " " Dont antique the equipment "

07-18-2022, 03:00 PM	#199
KQQL IT At the body shop. Join Date: Aug 2009 Location: Land of fruits and nuts. Posts: 5,259	Re: 2wd swap .250 spacer And the calipers clear Attached Images __________________ " That didnt make it any newer " " Dont antique the equipment "

07-25-2022, 10:41 PM	#200
KQQL IT At the body shop. Join Date: Aug 2009 Location: Land of fruits and nuts. Posts: 5,259	Re: 2wd swap Success Attached Images __________________ " That didnt make it any newer " " Dont antique the equipment " Last edited by KQQL IT; 07-25-2022 at 10:48 PM.

Register or Log In To remove these advertisements.